summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-14net: dsa: sja1105: Make the PTP command read-writeVladimir Oltean
The PTPSTRTSCH and PTPSTOPSCH bits are actually readable and indicate whether the time-aware scheduler is running or not. We will be using that for monitoring the scheduler in the next patch, so refactor the PTP command API in order to allow that. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14drm/amdgpu: fix null pointer deref in firmware header printingXiaojie Yuan
v2: declare as (struct common_firmware_header *) type because struct xxx_firmware_header inherits from it When CE's ucode_id(8) is used to get sdma_hdr, we will be accessing an unallocated amdgpu_firmware_info instance. This issue appears on rhel7.7 with gcc 4.8.5. Newer compilers might have optimized out such 'defined but not referenced' variable. [ 1120.798564] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a [ 1120.806703] IP: [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1120.813693] PGD 80000002603ff067 PUD 271b8d067 PMD 0 [ 1120.818931] Oops: 0000 [#1] SMP [ 1120.822245] Modules linked in: amdgpu(OE+) amdkcl(OE) amd_iommu_v2 amdttm(OE) amd_sched(OE) xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun bridge stp llc devlink ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat iptable_mangle iptable_security iptable_raw nf_conntrack libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dm_mirror dm_region_hash dm_log dm_mod intel_pmc_core intel_powerclamp coretemp intel_rapl joydev kvm_intel eeepc_wmi asus_wmi kvm sparse_keymap iTCO_wdt irqbypass rfkill crc32_pclmul snd_hda_codec_realtek mxm_wmi ghash_clmulni_intel intel_wmi_thunderbolt iTCO_vendor_support snd_hda_codec_generic snd_hda_codec_hdmi aesni_intel lrw gf128mul glue_helper ablk_helper sg cryptd pcspkr snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd pinctrl_sunrisepoint pinctrl_intel soundcore acpi_pad mei_me wmi mei i2c_i801 pcc_cpufreq ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic i915 i2c_algo_bit iosf_mbi drm_kms_helper e1000e syscopyarea sysfillrect sysimgblt fb_sys_fops ahci libahci drm ptp libata crct10dif_pclmul crct10dif_common crc32c_intel serio_raw pps_core drm_panel_orientation_quirks video i2c_hid [ 1120.954136] CPU: 4 PID: 2426 Comm: modprobe Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1 [ 1120.964390] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 1302 11/09/2015 [ 1120.973321] task: ffff991ef1e3c1c0 ti: ffff991ee625c000 task.ti: ffff991ee625c000 [ 1120.981020] RIP: 0010:[<ffffffffc0e3c9b3>] [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1120.990483] RSP: 0018:ffff991ee625f950 EFLAGS: 00010202 [ 1120.995935] RAX: 0000000000000002 RBX: ffff991edf6b2d38 RCX: ffff991edf6a0000 [ 1121.003391] RDX: 0000000000000000 RSI: ffff991f01d13898 RDI: ffffffffc110afb3 [ 1121.010706] RBP: ffff991ee625f9b0 R08: 0000000000000000 R09: 0000000000000000 [ 1121.018029] R10: 00000000000004c4 R11: ffff991ee625f64e R12: ffff991edf6b3220 [ 1121.025353] R13: ffff991edf6a0000 R14: 0000000000000008 R15: ffff991edf6b2d30 [ 1121.032666] FS: 00007f97b0c0b740(0000) GS:ffff991f01d00000(0000) knlGS:0000000000000000 [ 1121.041000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1121.046880] CR2: 000000000000000a CR3: 000000025e604000 CR4: 00000000003607e0 [ 1121.054239] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1121.061631] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1121.068938] Call Trace: [ 1121.071494] [<ffffffffc0e3dba8>] psp_hw_init+0x218/0x270 [amdgpu] [ 1121.077886] [<ffffffffc0da3188>] amdgpu_device_fw_loading+0xe8/0x160 [amdgpu] [ 1121.085296] [<ffffffffc0e3b34c>] ? vega10_ih_irq_init+0x4bc/0x730 [amdgpu] [ 1121.092534] [<ffffffffc0da5c75>] amdgpu_device_init+0x1495/0x1c90 [amdgpu] [ 1121.099675] [<ffffffffc0da9cab>] amdgpu_driver_load_kms+0x8b/0x2f0 [amdgpu] [ 1121.106888] [<ffffffffc01b25cf>] drm_dev_register+0x12f/0x1d0 [drm] [ 1121.113419] [<ffffffffa4dcdfd8>] ? pci_enable_device_flags+0xe8/0x140 [ 1121.120183] [<ffffffffc0da260a>] amdgpu_pci_probe+0xca/0x170 [amdgpu] [ 1121.126919] [<ffffffffa4dcf97a>] local_pci_probe+0x4a/0xb0 [ 1121.132622] [<ffffffffa4dd10c9>] pci_device_probe+0x109/0x160 [ 1121.138607] [<ffffffffa4eb4205>] driver_probe_device+0xc5/0x3e0 [ 1121.144766] [<ffffffffa4eb4603>] __driver_attach+0x93/0xa0 [ 1121.150507] [<ffffffffa4eb4570>] ? __device_attach+0x50/0x50 [ 1121.156422] [<ffffffffa4eb1da5>] bus_for_each_dev+0x75/0xc0 [ 1121.162213] [<ffffffffa4eb3b7e>] driver_attach+0x1e/0x20 [ 1121.167771] [<ffffffffa4eb3620>] bus_add_driver+0x200/0x2d0 [ 1121.173590] [<ffffffffa4eb4c94>] driver_register+0x64/0xf0 [ 1121.179345] [<ffffffffa4dd0905>] __pci_register_driver+0xa5/0xc0 [ 1121.185593] [<ffffffffc099f000>] ? 0xffffffffc099efff [ 1121.190914] [<ffffffffc099f0a4>] amdgpu_init+0xa4/0xb0 [amdgpu] [ 1121.197101] [<ffffffffa4a0210a>] do_one_initcall+0xba/0x240 [ 1121.202901] [<ffffffffa4b1c90a>] load_module+0x271a/0x2bb0 [ 1121.208598] [<ffffffffa4dad740>] ? ddebug_proc_write+0x100/0x100 [ 1121.214894] [<ffffffffa4b1ce8f>] SyS_init_module+0xef/0x140 [ 1121.220698] [<ffffffffa518bede>] system_call_fastpath+0x25/0x2a [ 1121.226870] Code: b4 01 60 a2 00 00 31 c0 e8 83 60 33 e4 41 8b 47 08 48 8b 4d d0 48 c7 c7 b3 af 10 c1 48 69 c0 68 07 00 00 48 8b 84 01 60 a2 00 00 <48> 8b 70 08 31 c0 48 89 75 c8 e8 56 60 33 e4 48 8b 4d d0 48 c7 [ 1121.247422] RIP [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1121.254432] RSP <ffff991ee625f950> [ 1121.258017] CR2: 000000000000000a [ 1121.261427] ---[ end trace e98b35387ede75bd ]--- Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Fixes: c5fb912653dae3f878 ("drm/amdgpu: add firmware header printing for psp fw loading (v2)") Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-14rsxx: add missed destroy_workqueue calls in removeChuhong Yuan
The driver misses calling destroy_workqueue in remove like what is done when probe fails. Add the missed calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14iocost: check active_list of all the ancestors in iocg_activate()Jiufei Xue
There is a bug that checking the same active_list over and over again in iocg_activate(). The intention of the code was checking whether all the ancestors and self have already been activated. So fix it. Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14rbd: silence bogus uninitialized warning in rbd_object_map_update_finish()Ilya Dryomov
Some versions of gcc (so far 6.3 and 7.4) throw a warning: drivers/block/rbd.c: In function 'rbd_object_map_callback': drivers/block/rbd.c:2124:21: warning: 'current_state' may be used uninitialized in this function [-Wmaybe-uninitialized] (current_state == OBJECT_EXISTS && state == OBJECT_EXISTS_CLEAN)) drivers/block/rbd.c:2092:23: note: 'current_state' was declared here u8 state, new_state, current_state; ^~~~~~~~~~~~~ It's bogus because all current_state accesses are guarded by has_current_state. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-14ceph: increment/decrement dio counter on async requestsJeff Layton
Ceph can in some cases issue an async DIO request, in which case we can end up calling ceph_end_io_direct before the I/O is actually complete. That may allow buffered operations to proceed while DIO requests are still in flight. Fix this by incrementing the i_dio_count when issuing an async DIO request, and decrement it when tearing down the aio_req. Fixes: 321fe13c9398 ("ceph: add buffered/direct exclusionary locking for reads and writes") Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-14ceph: take the inode lock before acquiring cap refsJeff Layton
Most of the time, we (or the vfs layer) takes the inode_lock and then acquires caps, but ceph_read_iter does the opposite, and that can lead to a deadlock. When there are multiple clients treading over the same data, we can end up in a situation where a reader takes caps and then tries to acquire the inode_lock. Another task holds the inode_lock and issues a request to the MDS which needs to revoke the caps, but that can't happen until the inode_lock is unwedged. Fix this by having ceph_read_iter take the inode_lock earlier, before attempting to acquire caps. Fixes: 321fe13c9398 ("ceph: add buffered/direct exclusionary locking for reads and writes") Link: https://tracker.ceph.com/issues/36348 Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-14ALSA: usb-audio: Fix incorrect size check for processing/extension unitsTakashi Iwai
The recently introduced unit descriptor validation had some bug for processing and extension units, it counts a bControlSize byte twice so it expected a bigger size than it should have been. This seems resulting in a probe error on a few devices. Fix the calculation for proper checks of PU and EU. Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114165613.7422-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-14Merge tag 'kbuild-fixes-v5.4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix build error when compiling SPARC VDSO with CONFIG_COMPAT=y - pass correct --arch option to Sparse * tag 'kbuild-fixes-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: tell sparse about the $ARCH sparc: vdso: fix build error of vdso32
2019-11-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull RDMA fixes from Jason Gunthorpe: "Bug fixes for old bugs in the hns and hfi1 drivers: - Calculate various values in hns properly to avoid over/underflows in some cases - Fix an oops, PCI negotiation on Gen4 systems, and bugs related to retries" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Correct the value of srq_desc_size RDMA/hns: Correct the value of HNS_ROCE_HEM_CHUNK_LEN IB/hfi1: TID RDMA WRITE should not return IB_WC_RNR_RETRY_EXC_ERR IB/hfi1: Calculate flow weight based on QP MTU for TID RDMA IB/hfi1: Ensure r_tid_ack is valid before building TID RDMA ACK packet IB/hfi1: Ensure full Gen3 speed in a Gen4 system
2019-11-14qtnfmac: add support for getting/setting transmit powerMikhail Karpenko
Add new command for getting/setting current transmit power and propagate requests from user space to firmware. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: handle MIC failure event from firmwareSergey Matyukevich
Report MIC failure from firmware to cfg80211 subsystem using dedicated callback cfg80211_michael_mic_failure. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: send EAPOL frames via control pathSergey Matyukevich
Send EAPOL frames via control path so they can be treated in a different way rather than normal data frames. In this case EAPOLs are sent with higher priority and with disabled aggregation and encryption. Besides, all devices benefit from sending EAPOL frames via high priority path, so move the functionality from chip specific to common code. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: modify Rx descriptors queue setupSergey Matyukevich
Rx descriptors queue length is hardware specific. Current common default value is no more than an accident. So move Rx descriptor queue setup to platform PCIe backend in the same way as it is already done for Tx. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: fix invalid channel information outputSergey Matyukevich
Do not attempt to print frequency for an invalid channel provided by firmware. That channel may simply not exist. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: fix debugfs support for multiple cardsSergey Matyukevich
Fix merge artifact for commit 0b68fe10b8e8 ("qtnfmac: modify debugfs to support multiple cards") and finally add debugfs support for multiple qtnfmac wireless cards. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: fix using skb after freeSergey Matyukevich
KASAN reported use-after-free error: [ 995.220767] BUG: KASAN: use-after-free in qtnf_cmd_send_with_reply+0x169/0x3e0 [qtnfmac] [ 995.221098] Read of size 2 at addr ffff888213d1ded0 by task kworker/1:1/71 The issue in qtnf_cmd_send_with_reply impacts all the commands that do not need response other then return code. For such commands, consume_skb is used for response skb and right after that return code in response skb is accessed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtl8xxxu: Add support for Edimax EW-7611ULBJes Sorensen
A number of people have reported the Edimax EW-7611ULB works fine. Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14KVM: x86/mmu: Take slots_lock when using kvm_mmu_zap_all_fast()Sean Christopherson
Acquire the per-VM slots_lock when zapping all shadow pages as part of toggling nx_huge_pages. The fast zap algorithm relies on exclusivity (via slots_lock) to identify obsolete vs. valid shadow pages, because it uses a single bit for its generation number. Holding slots_lock also obviates the need to acquire a read lock on the VM's srcu. Failing to take slots_lock when toggling nx_huge_pages allows multiple instances of kvm_mmu_zap_all_fast() to run concurrently, as the other user, KVM_SET_USER_MEMORY_REGION, does not take the global kvm_lock. (kvm_mmu_zap_all_fast() does take kvm->mmu_lock, but it can be temporarily dropped by kvm_zap_obsolete_pages(), so it is not enough to enforce exclusivity). Concurrent fast zap instances causes obsolete shadow pages to be incorrectly identified as valid due to the single bit generation number wrapping, which results in stale shadow pages being left in KVM's MMU and leads to all sorts of undesirable behavior. The bug is easily confirmed by running with CONFIG_PROVE_LOCKING and toggling nx_huge_pages via its module param. Note, until commit 4ae5acbc4936 ("KVM: x86/mmu: Take slots_lock when using kvm_mmu_zap_all_fast()", 2019-11-13) the fast zap algorithm used an ulong-sized generation instead of relying on exclusivity for correctness, but all callers except the recently added set_nx_huge_pages() needed to hold slots_lock anyways. Therefore, this patch does not have to be backported to stable kernels. Given that toggling nx_huge_pages is by no means a fast path, force it to conform to the current approach instead of reintroducing the previous generation count. Fixes: b8e8c8303ff28 ("kvm: mmu: ITLB_MULTIHIT mitigation", but NOT FOR STABLE) Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15kbuild: tell sparse about the $ARCHLuc Van Oostenryck
Sparse uses the same executable for all archs and uses flags like -m64, -mbig-endian or -D__arm__ for arch-specific parameters. But Sparse also uses value from the host machine used to build Sparse as default value for the target machine. This works, of course, well for native build but can create problems when cross-compiling, like defining both '__i386__' and '__arm__' when cross-compiling for arm on a x86-64 machine. Fix this by explicitely telling sparse the target architecture. Reported-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-15sparc: vdso: fix build error of vdso32Masahiro Yamada
Since commit 54b8ae66ae1a ("kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)"), sparc allmodconfig fails to build as follows: CC arch/sparc/vdso/vdso32/vclock_gettime.o unrecognized e_machine 18 arch/sparc/vdso/vdso32/vclock_gettime.o arch/sparc/vdso/vdso32/vclock_gettime.o: failed The cause of the breakage is that -pg flag not being dropped. The vdso32 files are located in the vdso32/ subdirectory, but I missed to update the Makefile. I removed the meaningless CFLAGS_REMOVE_vdso-note.o since it is only effective for C file. vdso-note.o is compiled from assembly file: arch/sparc/vdso/vdso-note.S arch/sparc/vdso/vdso32/vdso-note.S Fixes: 54b8ae66ae1a ("kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)") Reported-by: Anatoly Pugachev <matorola@gmail.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Acked-by: David S. Miller <davem@davemloft.net>
2019-11-14rtlwifi: rtl8192de: Fix missing enable interrupt flagLarry Finger
In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), the flag that indicates that interrupts are enabled was never set. In addition, there are several places when enable/disable interrupts were commented out are restored. A sychronize_interrupts() call is removed. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # v3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtlwifi: rtl8192de: Fix missing callback that tests for hw release of bufferLarry Finger
In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), a callback needed to check if the hardware has released a buffer indicating that a DMA operation is completed was not added. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # v3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtlwifi: rtl8192de: Fix missing code to retrieve RX buffer addressLarry Finger
In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), a callback to get the RX buffer address was added to the PCI driver. Unfortunately, driver rtl8192de was not modified appropriately and the code runs into a WARN_ONCE() call. The use of an incorrect array is also fixed. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # 3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14block, bfq: deschedule empty bfq_queues not referred by any processPaolo Valente
Since commit 3726112ec731 ("block, bfq: re-schedule empty queues if they deserve I/O plugging"), to prevent the service guarantees of a bfq_queue from being violated, the bfq_queue may be left busy, i.e., scheduled for service, even if empty (see comments in __bfq_bfqq_expire() for details). But, if no process will send requests to the bfq_queue any longer, then there is no point in keeping the bfq_queue scheduled for service. In addition, keeping the bfq_queue scheduled for service, but with no process reference any longer, may cause the bfq_queue to be freed when descheduled from service. But this is assumed to never happen, and causes a UAF if it happens. This, in turn, caused crashes [1, 2]. This commit fixes this issue by descheduling an empty bfq_queue when it remains with not process reference. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1767539 [2] https://bugzilla.kernel.org/show_bug.cgi?id=205447 Fixes: 3726112ec731 ("block, bfq: re-schedule empty queues if they deserve I/O plugging") Reported-by: Chris Evich <cevich@redhat.com> Reported-by: Patrick Dung <patdung100@gmail.com> Reported-by: Thorsten Schubert <tschubert@bafh.org> Tested-by: Thorsten Schubert <tschubert@bafh.org> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14mmc: sdhci-of-at91: fix quirk2 overwriteEugen Hristev
The quirks2 are parsed and set (e.g. from DT) before the quirk for broken HS200 is set in the driver. The driver needs to enable just this flag, not rewrite the whole quirk set. Fixes: 7871aa60ae00 ("mmc: sdhci-of-at91: add quirk for broken HS200") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-14ALSA: usb-audio: Fix incorrect NULL check in create_yamaha_midi_quirk()Takashi Iwai
The commit 60849562a5db ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") added NULL checks in create_yamaha_midi_quirk(), but there was an overlook. The code allows one of either injd or outjd is NULL, but the second if check made returning -ENODEV if any of them is NULL. Fix it in a proper form. Fixes: 60849562a5db ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") Reported-by: Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-14Merge tag 'linux-can-fixes-for-5.4-20191114' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-11-14 here another pull request for net/master consisting of one patch (including my S-o-b). Jouni Hogander's patch fixes a memory leak found by the syzbot in the slcan driver's error path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14Merge tag 'wireless-drivers-2019-11-14' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.4 Hopefully last fixes for v5.4, only one iwlwifi fix this time. iwlwifi * fix A-MSDU data corruption when using CCMP/GCMP ciphers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14slcan: Fix memory leak in error pathJouni Hogander
This patch is fixing memory leak reported by Syzkaller: BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096): comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s) hex dump (first 32 bytes): 73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a06eec0d>] __kmalloc+0x18b/0x2c0 [<0000000083306e66>] kvmalloc_node+0x3a/0xc0 [<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080 [<0000000061a996c9>] slcan_open+0x3ae/0x9a0 [<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0 [<0000000019289631>] tty_set_ldisc+0x28c/0x5f0 [<000000004de5a617>] tty_ioctl+0x48d/0x1590 [<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510 [<0000000059068dbc>] ksys_ioctl+0x99/0xb0 [<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0 [<0000000053d0332e>] do_syscall_64+0x16f/0x580 [<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000008ea75434>] 0xffffffffffffffff Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-13io_uring: ensure registered buffer import returns the IO lengthJens Axboe
A test case was reported where two linked reads with registered buffers failed the second link always. This is because we set the expected value of a request in req->result, and if we don't get this result, then we fail the dependent links. For some reason the registered buffer import returned -ERROR/0, while the normal import returns -ERROR/length. This broke linked commands with registered buffers. Fix this by making io_import_fixed() correctly return the mapped length. Cc: stable@vger.kernel.org # v5.3 Reported-by: 李通洲 <carter.li@eoitek.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13cxgb4: Fix an error code in cxgb4_mqprio_alloc_hw_resources()Dan Carpenter
"ret" is zero or possibly uninitialized on this error path. It should be a negative error code instead. Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13net: cdc_ncm: Signedness bug in cdc_ncm_set_dgram_size()Dan Carpenter
This code is supposed to test for negative error codes and partial reads, but because sizeof() is size_t (unsigned) type then negative error codes are type promoted to high positive values and the condition doesn't work as expected. Fixes: 332f989a3b00 ("CDC-NCM: handle incomplete transfer of MTU") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13net: atlantic: Signedness bug in aq_vec_isr_legacy()Dan Carpenter
irqreturn_t type is an enum and in this context it's unsigned, so "err" can't be irqreturn_t or it breaks the error handling. In fact the "err" variable is only used to store integers (never irqreturn_t) so it should be declared as int. I removed the initialization because it's not required. Using a bogus initializer turns off GCC's uninitialized variable warnings. Secondly, there is a GCC warning about unused assignments and we would like to enable that feature eventually so we have been trying to remove these unnecessary initializers. Fixes: 7b0c342f1f67 ("net: atlantic: code style cleanup") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13bnxt_en: Fix array overrun in bnxt_fill_l2_rewrite_fields().Venkat Duvvuru
Fix the array overrun while keeping the eth_addr and eth_addr_mask pointers as u16 to avoid unaligned u16 access. These were overlooked when modifying the code to use u16 pointer for proper alignment. Fixes: 90f906243bf6 ("bnxt_en: Add support for L2 rewrite") Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13io_uring: Fix getting file for timeoutPavel Begunkov
For timeout requests io_uring tries to grab a file with specified fd, which is usually stdin/fd=0. Update io_op_needs_file() Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13net/mlx5: TC: Offload flow table rulesPaul Blakey
Since both tc rules and flow table rules are of the same format, we can re-use tc parsing for that, and move the flow table rules to their steering domain - In this case, the next chain after max tc chain. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Add devlink reloadMichael Guralnik
Implement devlink reload for mlx5. Usage example: devlink dev reload pci/0000:06:00.0 Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5e: Set netdev name space on creationMichael Guralnik
Use devlink instance name space to set the netdev net namespace. Preparation patch for devlink reload implementation. Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5e: Fix error flow cleanup in mlx5e_tc_tun_create_header_ipv4/6Eli Cohen
Be sure to release the neighbour in case of failures after successful route lookup. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Remove redundant NULL initializationsEli Cohen
Neighbour initializations to NULL are not necessary as the pointers are not used if an error is returned, and if success returned, pointers are initialized. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Read num_vfs before disabling SR-IOVParav Pandit
mlx5_device_disable_sriov() currently reads num_vfs from the PCI core. However when mlx5_device_disable_sriov() is executed, SR-IOV is already disabled at the PCI level. Due to this disable_hca() cleanup is not done during SR-IOV disable flow. mlx5_sriov_disable() pci_enable_sriov() mlx5_device_disable_sriov() <- num_vfs is zero here. When SR-IOV enablement fails during mlx5_sriov_enable(), HCA's are left in enabled stage because mlx5_device_disable_sriov() relies on num_vfs from PCI core. mlx5_sriov_enable() mlx5_device_enable_sriov() pci_enable_sriov() <- Fails Hence, to overcome above issues, (a) Read num_vfs before disabling SR-IOV and use it. (b) Use num_vfs given when enabling sriov in error unwinding path. Fixes: d886aba677a0 ("net/mlx5: Reduce dependency on enabled_vfs counter and num_vfs") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: DR, Fix matcher builders select checkAlex Vesker
When selecting a matcher ste_builder_arr will always be evaluated as true, instead check if num_of_builders is set for validity. Fixes: 667f264676c7 ("net/mlx5: DR, Support IPv4 and IPv6 mixed matcher") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux 1) New generic devlink param "enable_roce", for downstream devlink reload support 2) Do vport ACL configuration on per vport basis when enabling/disabling a vport. This enables to have vports enabled/disabled outside of eswitch config for future 3) Split the code for legacy vs offloads mode and make it clear 4) Tide up vport locking and workqueue usage 5) Fix metadata enablement for ECPF 6) Make explicit use of VF property to publish IB_DEVICE_VIRTUAL_FUNCTION 7) E-Switch and flow steering core low level support and refactoring for netfilter flowtables offload Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Add new chain for netfilter flow table offloadPaul Blakey
Netfilter tables (nftables) implements a software datapath that comes after tc ingress datapath. The datapath supports offloading such rules via the flow table offload API. This API is currently only used by NFT and it doesn't provide the global priority in regards to tc offload, so we assume offloading such rules must come after tc. It does provide a flow table priority parameter, so we need to provide some supported priority range. For that, split fastpath prio to two, flow table offload and tc offload, with one dedicated priority chain for flow table offload. Next patch will re-use the multi chain API to access this chain by allowing access to this chain by the fdb_sub_namespace. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Refactor creating fast path prio chainsPaul Blakey
Next patch will re-use this to add a new chain but in a different prio. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Accumulate levels for chains prio namespacesPaul Blakey
Tc chains are implemented by creating a chained prio steering type, and inside it there is a namespace for each chain (FDB_TC_MAX_CHAINS). Each of those has a list of priorities. Currently, all namespaces in a prio start at the parent prio level. But since we can jump from chain (namespace) to another chain in the same prio, we need the levels for higher chains to be higher as well. So we created unused prios to account for levels in previous namespaces. Fix that by accumulating the namespaces levels if we are inside a chained type prio, and removing the unused prios. Fixes: 328edb499f99 ('net/mlx5: Split FDB fast path prio to multiple namespaces') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Define fdb tc levels per prioPaul Blakey
Define FDB_TC_LEVELS_PER_PRIO instead of magic number 2. This is the number of levels used by each tc prio table in the fdb. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Rename FDB_* tc related defines to FDB_TC_* definesPaul Blakey
Rename it to prepare for next patch that will add a different type of offload to the FDB. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-13net/mlx5: Simplify fdb chain and prio eswitch definesPaul Blakey
FDB_MAX_CHAIN and FDB_MAX_PRIO were defined differently depending on if CONFIG_MLX5_ESWITCH is enabled to save space on allocations. This is a minor space saving, and there is no real need for it. Simplify things instead, and define them the same in both cases. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:08:04 +0000