summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-22Bluetooth: Fix memory leak in hci_connect_le_scanNavid Emamdoost
In the implementation of hci_connect_le_scan() when conn is added via hci_conn_add(), if hci_explicit_conn_params_set() fails the allocated memory for conn is leaked. Use hci_conn_del() to release it. Fixes: f75113a26008 ("Bluetooth: add hci_connect_le_scan") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-22EDAC/altera: Use the Altera System Manager driverThor Thayer
Simplify by using the Altera System Manager driver that abstracts the differences between ARM32 and ARM64. Also allows the removal of the Arria10 test function since this is handled by the System Manager driver. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Meng.Li@windriver.com Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1574361048-17572-4-git-send-email-thor.thayer@linux.intel.com
2019-11-22EDAC/altera: Cleanup the ECC ManagerThor Thayer
Cleanup the ECC Manager peripheral test in probe function as suggested by James. Remove the check for Stratix10. Suggested-by: James Morse <james.morse@arm.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1573156890-26891-2-git-send-email-thor.thayer@linux.intel.com
2019-11-22EDAC/altera: Use fast register IO for S10 IRQsMeng Li
When an IRQ occurs, regmap_{read,write,...}() is invoked in atomic context. Regmap must indicate register IO is fast so that a spinlock is used instead of a mutex to avoid sleeping in atomic context: lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_write a10_eccmgr_irq_unmask unmask_irq.part.0 irq_enable __irq_startup irq_startup __setup_irq request_threaded_irq devm_request_threaded_irq altr_sdram_probe Mark it so. [ bp: Massage. ] Fixes: 3dab6bd52687 ("EDAC, altera: Add support for Stratix10 SDRAM EDAC") Reported-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: stable <stable@vger.kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1574361048-17572-2-git-send-email-thor.thayer@linux.intel.com
2019-11-22EDAC/ghes: Do not warn when incrementing refcount on 0Robert Richter
The following warning from the refcount framework is seen during ghes initialization: EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) ------------[ cut here ]------------ refcount_t: increment on 0; use-after-free. WARNING: CPU: 36 PID: 1 at lib/refcount.c:156 refcount_inc_checked [...] Call trace: refcount_inc_checked ghes_edac_register ghes_probe ... It warns if the refcount is incremented from zero. This warning is reasonable as a kernel object is typically created with a refcount of one and freed once the refcount is zero. Afterwards the object would be "used-after-free". For GHES, the refcount is initialized with zero, and that is why this message is seen when initializing the first instance. However, whenever the refcount is zero, the device will be allocated and registered. Since the ghes_reg_mutex protects the refcount and serializes allocation and freeing of ghes devices, a use-after-free cannot happen here. Instead of using refcount_inc() for the first instance, use refcount_set(). This can be used here because the refcount is zero at this point and can not change due to its protection by the mutex. Fixes: 23f61b9fc5cc ("EDAC/ghes: Fix locking and memory barrier issues") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: John Garry <john.garry@huawei.com> Cc: <huangming23@huawei.com> Cc: James Morse <james.morse@arm.com> Cc: <linuxarm@huawei.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <tanxiaofei@huawei.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <wanghuiqiang@huawei.com> Link: https://lkml.kernel.org/r/20191121213628.21244-1-rrichter@marvell.com
2019-11-22Bluetooth: Allow combination of BDADDR_PROPERTY and INVALID_BDADDR quirksMarcel Holtmann
When utilizing BDADDR_PROPERTY and INVALID_BDADDR quirks together it results in an unconfigured controller even if the bootloader provides a valid address. Fix this by allowing a bootloader provided address to mark the controller as configured. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-11-22pcmcia: remove unused dprintk definitionDominik Brodowski
A recent cleanup patch removed the remaining users of dprintk() in i82092.c, so get rid of the definition of dprintk() as well. Fixes: 836e9494f448 ("pcmcia/i82092: Refactored dprintk macro for dev_dbg().") Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-11-22pcmcia: include <pcmcia/ds.h> for pcmcia_parse_tupleBen Dooks (Codethink)
Include <pcmcia/ds.h> for pcmcia_parse_tuple declaration to fix the following sparse warning: drivers/pcmcia/cistpl.c:1287:5: warning: symbol 'pcmcia_parse_tuple' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-11-22pcmcia: include cs_internal.h for missing declarationsBen Dooks (Codethink)
Include cs_internal.h (and pcmcia/cistpl.h as required by cs_internal.h) for the declearions of cb_alloc and cb_free to silence the following sparse warnings: drivers/pcmcia/cardbus.c:64:11: warning: symbol 'cb_alloc' was not declared. Should it be static? drivers/pcmcia/cardbus.c:103:6: warning: symbol 'cb_free' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-11-21Merge branch 'hv_netvsc-Fix-send-indirection-table-offset'David S. Miller
Haiyang Zhang says: ==================== hv_netvsc: Fix send indirection table offset Fix send indirection table offset issues related to guest and host bugs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21hv_netvsc: Fix send_table offset in case of a host bugHaiyang Zhang
If negotiated NVSP version <= NVSP_PROTOCOL_VERSION_6, the offset may be wrong (too small) due to a host bug. This can cause missing the end of the send indirection table, and add multiple zero entries from leading zeros before the data region. This bug adds extra burden on channel 0. So fix the offset by computing it from the data structure sizes. This will ensure netvsc driver runs normally on unfixed hosts, and future fixed hosts. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21hv_netvsc: Fix offset usage in netvsc_send_table()Haiyang Zhang
To reach the data region, the existing code adds offset in struct nvsp_5_send_indirect_table on the beginning of this struct. But the offset should be based on the beginning of its container, struct nvsp_message. This bug causes the first table entry missing, and adds an extra zero from the zero pad after the data region. This can put extra burden on the channel 0. So, correct the offset usage. Also add a boundary check to ensure not reading beyond data region. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21enetc: make enetc_setup_tc_mqprio staticMao Wenan
While using ARCH=mips CROSS_COMPILE=mips-linux-gnu- command to compile, make C=2 drivers/net/ethernet/freescale/enetc/enetc.o one warning can be found: drivers/net/ethernet/freescale/enetc/enetc.c:1439:5: warning: symbol 'enetc_setup_tc_mqprio' was not declared. Should it be static? This patch make symbol enetc_setup_tc_mqprio static. Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMINMaciej Żenczykowski
NET_RAW is less dangerous, so more likely to be available to a process, so check it first to prevent some spurious logging. This matches IP_TRANSPARENT which checks NET_RAW first. Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22Merge tag 'drm-intel-fixes-2019-11-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix kernel oops on dumb_create ioctl on no crtc situation - Fix bad ugly colored flash on VLV/CHV related to gamma LUT update - Fix unity of the frequencies reported on PMU - Fix kernel oops on set_page_dirty using better locks around it - Protect the request pointer with RCU to prevent it being freed while we might need still - Make pool objects read-only - Restore physical addresses for fb_map to avoid corrupted page table Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191121165339.GA23920@intel.com
2019-11-21Merge branch 'net-introduce-and-use-route-hint'David S. Miller
Paolo Abeni says: ==================== net: introduce and use route hint This series leverages the listification infrastructure to avoid unnecessary route lookup on ingress packets. In absence of custom rules, packets with equal daddr will usually land on the same dst. When processing packet bursts (lists) we can easily reference the previous dst entry. When we hit the 'same destination' condition we can avoid the route lookup, coping the already available dst. Detailed performance numbers are available in the individual commit messages. v3 -> v4: - move helpers to their own patches (Eric D.) - enable hints for SUBTREE builds (David A.) - re-enable hints for ipv4 forward (David A.) v2 -> v3: - use fib*_has_custom_rules() helpers (David A.) - add ip*_extract_route_hint() helper (Edward C.) - use prev skb as hint instead of copying data (Willem ) v1 -> v2: - fix build issue with !CONFIG_IP*_MULTIPLE_TABLES - fix potential race in ip6_list_rcv_finish() ==================== Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21ipv4: use dst hint for ipv4 list receivePaolo Abeni
This is alike the previous change, with some additional ipv4 specific quirk. Even when using the route hint we still have to do perform additional per packet checks about source address validity: a new helper is added to wrap them. Hints are explicitly disabled if the destination is a local broadcast, that keeps the code simple and local broadcast are a slower path anyway. UDP flood performances vs recvmmsg() receiver: vanilla patched delta Kpps Kpps % 1683 1871 +11 In the worst case scenario - each packet has a different destination address - the performance delta is within noise range. v3 -> v4: - re-enable hints for forward v2 -> v3: - really fix build (sic) and hint usage check - use fib4_has_custom_rules() helpers (David A.) - add ip_extract_route_hint() helper (Edward C.) - use prev skb as hint instead of copying data (Willem) v1 -> v2: - fix build issue with !CONFIG_IP_MULTIPLE_TABLES Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21ipv4: move fib4_has_custom_rules() helper to public headerPaolo Abeni
So that we can use it in the next patch. Additionally constify the helper argument. Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21ipv6: introduce and uses route look hints for list input.Paolo Abeni
When doing RX batch packet processing, we currently always repeat the route lookup for each ingress packet. When no custom rules are in place, and there aren't routes depending on source addresses, we know that packets with the same destination address will use the same dst. This change tries to avoid per packet route lookup caching the destination address of the latest successful lookup, and reusing it for the next packet when the above conditions are in place. Ingress traffic for most servers should fit. The measured performance delta under UDP flood vs a recvmmsg receiver is as follow: vanilla patched delta Kpps Kpps % 1431 1674 +17 In the worst-case scenario - each packet has a different destination address - the performance delta is within noise range. v3 -> v4: - support hints for SUBFLOW build, too (David A.) - several style fixes (Eric) v2 -> v3: - add fib6_has_custom_rules() helpers (David A.) - add ip6_extract_route_hint() helper (Edward C.) - use hint directly in ip6_list_rcv_finish() (Willem) v1 -> v2: - fix build issue with !CONFIG_IPV6_MULTIPLE_TABLES - fix potential race when fib6_has_custom_rules is set while processing a packet batch Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21ipv6: keep track of routes using srcPaolo Abeni
Use a per namespace counter, increment it on successful creation of any route using the source address, decrement it on deletion of such routes. This allows us to check easily if the routing decision in the current namespace depends on the packet source. Will be used by the next patch. Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21ipv6: add fib6_has_custom_rules() helperPaolo Abeni
It wraps the namespace field with the same name, to easily access it regardless of build options. Suggested-by: David Ahern <dsahern@gmail.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21Merge branch 'DSA-Felix-PTP'David S. Miller
Yangbo Lu says: ==================== Support PTP clock and hardware timestamping for DSA Felix driver This patch-set is to support PTP clock and hardware timestamping for DSA Felix driver. Some functions in ocelot.c/ocelot_board.c driver were reworked/exported, so that DSA Felix driver was able to reuse them as much as possible. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: dsa: ocelot: add hardware timestamping support for FelixYangbo Lu
This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: dsa: ocelot: define PTP registers for felix_vsc9959Yangbo Lu
This patch is to define PTP registers for felix_vsc9959. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: mscc: ocelot: convert to use ocelot_port_add_txtstamp_skb()Yangbo Lu
Convert to use ocelot_port_add_txtstamp_skb() for adding skbs which require TX timestamp into list. Export it so that DSA Felix driver could reuse it too. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: mscc: ocelot: convert to use ocelot_get_txtstamp()Yangbo Lu
The method getting TX timestamp by reading timestamp FIFO and matching skbs list is common for DSA Felix driver too. So move code out of ocelot_board.c, convert to use ocelot_get_txtstamp() function and export it. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: mscc: ocelot: export ocelot_hwstamp_get/set functionsYangbo Lu
Export ocelot_hwstamp_get/set functions so that DSA driver is able to reuse them. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21bpf: skmsg, fix potential psock NULL pointer dereferenceJohn Fastabend
Report from Dan Carpenter, net/core/skmsg.c:792 sk_psock_write_space() error: we previously assumed 'psock' could be null (see line 790) net/core/skmsg.c 789 psock = sk_psock(sk); 790 if (likely(psock && sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))) Check for NULL 791 schedule_work(&psock->work); 792 write_space = psock->saved_write_space; ^^^^^^^^^^^^^^^^^^^^^^^^ 793 rcu_read_unlock(); 794 write_space(sk); Ensure psock dereference on line 792 only occurs if psock is not null. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Will Deacon: "Ensure PAN is re-enabled following user fault in uaccess routines. After I thought we were done for 5.4, we had a report this week of a nasty issue that has been shown to leak data between different user address spaces thanks to corruption of entries in the TLB. In hindsight, we should have spotted this in review when the PAN code was merged back in v4.3, but hindsight is 20/20 and I'm trying not to beat myself up too much about it despite being fairly miserable. Anyway, the fix is "obvious" but the actual failure is more more subtle, and is described in the commit message. I've included a fairly mechanical follow-up patch here as well, which moves this checking out into the C wrappers which is what we do for {get,put}_user() already and allows us to remove these bloody assembly macros entirely. The patches have passed kernelci [1] [2] [3] and CKI [4] tests over night, as well as some targetted testing [5] for this particular issue. The first patch is tagged for stable and should be applied to 4.14, 4.19 and 5.3. I have separate backports for 4.4 and 4.9, which I'll send out once this has landed in your tree (although the original patch applies cleanly, it won't build for those two trees). Thanks to Pavel Tatashin for reporting this and Mark Rutland for helping to diagnose the issue and review/test the solution" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: uaccess: Remove uaccess_*_not_uao asm macros arm64: uaccess: Ensure PAN is re-enabled after unhandled uaccess fault
2019-11-21audit: Move audit_log_task declaration under CONFIG_AUDITSYSCALLJiri Olsa
The 0-DAY found that audit_log_task is not declared under CONFIG_AUDITSYSCALL which causes compilation error when it is not defined: kernel/bpf/syscall.o: In function `bpf_audit_prog.isra.30': >> syscall.c:(.text+0x860): undefined reference to `audit_log_task' Adding the audit_log_task declaration and stub within CONFIG_AUDITSYSCALL ifdef. Fixes: 91e6015b082b ("bpf: Emit audit messages upon successful prog load and unload") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21sfc: Only cancel the PPS workqueue if it existsMartin Habets
The workqueue only exists for the primary PF. For other functions we hit a WARN_ON in kernel/workqueue.c. Fixes: 7c236c43b838 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21Merge tag 'for-linus-20191121' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a single fix for an issue in nbd introduced in this cycle" * tag 'for-linus-20191121' of git://git.kernel.dk/linux-block: nbd:fix memory leak in nbd_get_socket()
2019-11-21Merge tag 'gpio-v5.4-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "A last set of small fixes for GPIO, this cycle was quite busy. - Fix debounce delays on the MAX77620 GPIO expander - Use the correct unit for debounce times on the BD70528 GPIO expander - Get proper deps for parallel builds of the GPIO tools - Add a specific ACPI quirk for the Terra Pad 1061" * tag 'gpio-v5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklist tools: gpio: Correctly add make dependencies for gpio_utils gpio: bd70528: Use correct unit for debounce times gpio: max77620: Fixup debounce delays
2019-11-21net: Fix Kconfig indentation, continuedKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21drivers: net: Fix Kconfig indentation, continuedKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21Merge tag 'for-linus-2019-11-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd fixlet from Christian Brauner: "This contains a simple fix for the pidfd poll method. In the original patchset pidfd_poll() was made to return an unsigned int. However, the poll method is defined to return a __poll_t. While the unsigned int is not a huge deal it's just nicer to return a __poll_t. I've decided to send it right before the 5.4 release mainly so that stable doesn't need to backport it to both 5.4 and 5.3" * tag 'for-linus-2019-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fork: fix pidfd_poll()'s return type
2019-11-21nfc: port100: handle command failure cleanlyOliver Neukum
If starting the transfer of a command suceeds but the transfer for the reply fails, it is not enough to initiate killing the transfer for the command may still be running. You need to wait for the killing to finish before you can reuse URB and buffer. Reported-and-tested-by: syzbot+711468aa5c3a1eabf863@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21lwtunnel: check erspan options before allocating tun_infoXin Long
As Jakub suggested on another patch, it's better to do the check on erspan options before allocating memory. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21lwtunnel: be STRICT to validate the new LWTUNNEL_IP(6)_OPTSXin Long
LWTUNNEL_IP(6)_OPTS are the new items in ip(6)_tun_policy, which are parsed by nla_parse_nested_deprecated(). We should check it strictly by setting .strict_start_type = LWTUNNEL_IP(6)_OPTS. This patch also adds missing LWTUNNEL_IP6_OPTS in ip6_tun_policy. Fixes: 4ece47787077 ("lwtunnel: add options setting and dumping for geneve") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: remove the unnecessary strict_start_type in some policiesXin Long
ct_policy and mpls_policy are parsed with nla_parse_nested(), which does NL_VALIDATE_STRICT validation, strict_start_type is not needed to set as it is actually trying to make some attributes parsed with NL_VALIDATE_STRICT. This patch is to remove it, and do the same on rtm_nh_policy which is parsed by nlmsg_parse(). Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21Merge branch 'net-sched-support-vxlan-and-erspan-options'David S. Miller
Xin Long says: ==================== net: sched: support vxlan and erspan options This patchset is to add vxlan and erspan options support in cls_flower and act_tunnel_key. The form is pretty much like geneve_opts in: https://patchwork.ozlabs.org/patch/935272/ https://patchwork.ozlabs.org/patch/954564/ but only one option is allowed for vxlan and erspan. v1->v2: - see each patch changelog. ==================== Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: sched: allow flower to match erspan optionsXin Long
This patch is to allow matching options in erspan. The options can be described in the form: VER:INDEX:DIR:HWID/VER:INDEX_MASK:DIR_MASK:HWID_MASK. When ver is set to 1, index will be applied while dir and hwid will be ignored, and when ver is set to 2, dir and hwid will be used while index will be ignored. Different from geneve, only one option can be set. And also, geneve options, vxlan options or erspan options can't be set at the same time. # ip link add name erspan1 type erspan external # tc qdisc add dev erspan1 ingress # tc filter add dev erspan1 protocol ip parent ffff: \ flower \ enc_src_ip 10.0.99.192 \ enc_dst_ip 10.0.99.193 \ enc_key_id 11 \ erspan_opts 1:12:0:0/1:ffff:0:0 \ ip_proto udp \ action mirred egress redirect dev eth0 v1->v2: - improve some err msgs of extack. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: sched: allow flower to match vxlan optionsXin Long
This patch is to allow matching gbp option in vxlan. The options can be described in the form GBP/GBP_MASK, where GBP is represented as a 32bit hexadecimal value. Different from geneve, only one option can be set. And also, geneve options and vxlan options can't be set at the same time. # ip link add name vxlan0 type vxlan dstport 0 external # tc qdisc add dev vxlan0 ingress # tc filter add dev vxlan0 protocol ip parent ffff: \ flower \ enc_src_ip 10.0.99.192 \ enc_dst_ip 10.0.99.193 \ enc_key_id 11 \ vxlan_opts 01020304/ffffffff \ ip_proto udp \ action mirred egress redirect dev eth0 v1->v2: - add .strict_start_type for enc_opts_policy as Jakub noticed. - use Duplicate instead of Wrong in err msg for extack as Jakub suggested. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: sched: add erspan option support to act_tunnel_keyXin Long
This patch is to allow setting erspan options using the act_tunnel_key action. Different from geneve options, only one option can be set. And also, geneve options, vxlan options or erspan options can't be set at the same time. Options are expressed as ver:index:dir:hwid, when ver is set to 1, index will be applied while dir and hwid will be ignored, and when ver is set to 2, dir and hwid will be used while index will be ignored. # ip link add name erspan1 type erspan external # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: \ flower indev eth0 \ ip_proto udp \ action tunnel_key \ set src_ip 10.0.99.192 \ dst_ip 10.0.99.193 \ dst_port 6081 \ id 11 \ erspan_opts 1:2:0:0 \ action mirred egress redirect dev erspan1 v1->v2: - do the validation when dst is not yet allocated as Jakub suggested. - use Duplicate instead of Wrong in err msg for extack. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: sched: add vxlan option support to act_tunnel_keyXin Long
This patch is to allow setting vxlan options using the act_tunnel_key action. Different from geneve options, only one option can be set. And also, geneve options and vxlan options can't be set at the same time. gbp is the only param for vxlan options: # ip link add name vxlan0 type vxlan dstport 0 external # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: \ flower indev eth0 \ ip_proto udp \ action tunnel_key \ set src_ip 10.0.99.192 \ dst_ip 10.0.99.193 \ dst_port 6081 \ id 11 \ vxlan_opts 01020304 \ action mirred egress redirect dev vxlan0 v1->v2: - add .strict_start_type for enc_opts_policy as Jakub noticed. - use Duplicate instead of Wrong in err msg for extack as Jakub suggested. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21octeontx2-af: Fix uninitialized variable in debugfsDan Carpenter
If rvu_get_blkaddr() fails, then this rvu_cgx_nix_cuml_stats() returns zero and we write some uninitialized data into the debugfs output. On the error paths, the use of the uninitialized "*stat" is harmless, but it will lead to a Smatch warning (static analysis) and a UBSan warning (runtime analysis) so we should prevent that as well. Fixes: f967488d095e ("octeontx2-af: Add per CGX port level NIX Rx/Tx counters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21vsock: avoid to assign transport if its initialization failsStefano Garzarella
If transport->init() fails, we can't assign the transport to the socket, because it's not initialized correctly, and any future calls to the transport callbacks would have an unexpected behavior. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Reported-and-tested-by: syzbot+e2e5c07bf353b2f79daa@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21mt76: fix fix ampdu lockingMarkus Theil
The current ampdu locking code does not unlock its mutex in the early return case. This patch fixes it. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-21nbd: prevent memory leakNavid Emamdoost
In nbd_add_socket when krealloc succeeds, if nsock's allocation fail the reallocted memory is leak. The correct behaviour should be assigning the reallocted memory to config->socks right after success. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-21Merge branch 'nvme-5.5' of git://git.infradead.org/nvme into ↵Jens Axboe
for-5.5/drivers-post Pull NVMe changes from Keith: "- The only new feature is the optional hwmon support for nvme (Guenter and Akinobu) - A universal work-around for controllers reading discard payloads beyond the range boundary (Eduard) - Chaitanya graciously agreed to share the target driver maintenance" * 'nvme-5.5' of git://git.infradead.org/nvme: nvme: hwmon: add quirk to avoid changing temperature threshold nvme: hwmon: provide temperature min and max values for each sensor nvmet: add another maintainer nvme: Discard workaround for non-conformant devices nvme: Add hardware monitoring support
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 05:50:56 +0000