summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-22IB/mlx4: Fix lockdep splat for the iboe lockJack Morgenstein
Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Get upper dev addresses as RoCE GIDs when port comes upMoni Shoua
When a RoCE port becomes active and the netdev of the port has upper device (e.g bond/team), GIDs derived from the upper dev should appear in the port's RoCE GID table. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Reorder steps in RoCE GID table initializationMoni Shoua
There's no need to reset the gid table twice and we need to do it only for Ethernet ports. Also, no need to actively scan ndetdevs since it's being done immediatly after we register netdev notifiers. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Don't duplicate the default RoCE GIDMoni Shoua
When reading the IPv6 addresses from the net-device, make sure to avoid adding a duplicate entry to the GID table because of equality between the default GID we generate and the default IPv6 link-local address of the device. Fixes: acc4fccf4eff ("IB/mlx4: Make sure GID index 0 is always occupied") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/mlx4: Avoid null pointer dereference in mlx4_ib_scan_netdevs()Moni Shoua
When Ethernet netdev is not present for a port (e.g. when the link layer type of the port is InfiniBand) it's possible to dereference a null pointer when we do netdevice scanning. To fix that, we move a section of code that needs to run only when netdev is present to a proper if () statement. Fixes: ad4885d279b6 ("IB/mlx4: Build the port IBoE GID table properly under bonding") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/iser: Bump version to 1.4.1Or Gerlitz
Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/iser: Allow bind only when connection state is UPSagi Grimberg
We need to fail the bind operation if the iser connection state != UP (started teardown) and this should be done under the state lock. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/iser: Fix RX/TX CQ resource leak on error flowRoi Dayan
When failing to allocate TX CQ we already allocated RX CQ, so we need to make sure we release it. Also, when failing to register notification to the RX CQ we currently leak both RX and TX CQs of the current index, fix that too. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22RDMA/ocrdma: Use right macro in query AHdevesh.sharma@emulex.com
ocrdma_query_ah() does not use correct macro, and checks the wrong bit for the validity of address handle in vector table. Fix this. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22RDMA/ocrdma: Resolve L2 address when creating user AHdevesh.sharma@emulex.com
Because of IP-based GIDs, userspace AHs must have MAC and VLAN ID resolved separately. Presently, user AHs are broken for ocrdma. This patch resolves L2 addresses while creating user AH and obtains the right DMAC and VLAN ID before creating AH. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22mlx4: Correct error flows in rereg_mrMatan Barak
This patch addresses feedback from Sagi Grimberg on the rereg_mr implementation of mlx4. The following are fixed: 1. Set the correct pd_flags 2. Make sure we change the iova and size MR fields only after successful write and allocation of the MTTs. 3. Make the error checking more robust Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22Merge branch 'for-3.17-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "create_singlethread_workqueue() is the old interface which is kept around for backward compatibility - each should be reviewed to determine whether singlethread usage was to save worker threads or for ordering guarantee and whether it's depended upon by memory reclaim path. While adding NUMA support for unbound workqueues during v3.10, I forgot to update it breaking the singlethread and ordering properties on NUMA setups. The breakage was unfortunately rather subtle and went without being reported until now. The only missing piece is __WQ_ORDERED flag which makes the unbounded workqueue use a single backend queue across different NUMA nodes. It's fixed by making create_singlethread_workqueue() wrap alloc_ordered_workqueue() so that possible future updates are inherited automatically" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: apply __WQ_ORDERED to create_singlethread_workqueue()
2014-09-22Fix nasty 32-bit overflow bug in buffer i/o code.Anton Altaparmakov
On 32-bit architectures, the legacy buffer_head functions are not always handling the sector number with the proper 64-bit types, and will thus fail on 4TB+ disks. Any code that uses __getblk() (and thus bread(), breadahead(), sb_bread(), sb_breadahead(), sb_getblk()), and calls it using a 64-bit block on a 32-bit arch (where "long" is 32-bit) causes an inifinite loop in __getblk_slow() with an infinite stream of errors logged to dmesg like this: __find_get_block_slow() failed. block=6740375944, b_blocknr=2445408648 b_state=0x00000020, b_size=512 device sda1 blocksize: 512 Note how in hex block is 0x191C1F988 and b_blocknr is 0x91C1F988 i.e. the top 32-bits are missing (in this case the 0x1 at the top). This is because grow_dev_page() is broken and has a 32-bit overflow due to shifting the page index value (a pgoff_t - which is just 32 bits on 32-bit architectures) left-shifted as the block number. But the top bits to get lost as the pgoff_t is not type cast to sector_t / 64-bit before the shift. This patch fixes this issue by type casting "index" to sector_t before doing the left shift. Note this is not a theoretical bug but has been seen in the field on a 4TiB hard drive with logical sector size 512 bytes. This patch has been verified to fix the infinite loop problem on 3.17-rc5 kernel using a 4TB disk image mounted using "-o loop". Without this patch doing a "find /nt" where /nt is an NTFS volume causes the inifinite loop 100% reproducibly whilst with the patch it works fine as expected. Signed-off-by: Anton Altaparmakov <aia21@cantab.net> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-22cpufreq: release policy->rwsem on errorPrarit Bhargava
While debugging a cpufreq-related hardware failure on a system I saw the following lockdep warning: ========================= [ BUG: held lock freed! ] 3.17.0-rc4+ #1 Tainted: G E ------------------------- insmod/2247 is freeing memory ffff88006e1b1400-ffff88006e1b17ff, with a lock still held there! (&policy->rwsem){+.+...}, at: [<ffffffff8156d37d>] __cpufreq_add_dev.isra.21+0x47d/0xb80 3 locks held by insmod/2247: #0: (subsys mutex#5){+.+.+.}, at: [<ffffffff81485579>] subsys_interface_register+0x69/0x120 #1: (cpufreq_rwsem){.+.+.+}, at: [<ffffffff8156cf73>] __cpufreq_add_dev.isra.21+0x73/0xb80 #2: (&policy->rwsem){+.+...}, at: [<ffffffff8156d37d>] __cpufreq_add_dev.isra.21+0x47d/0xb80 stack backtrace: CPU: 0 PID: 2247 Comm: insmod Tainted: G E 3.17.0-rc4+ #1 Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 08/24/2013 0000000000000000 000000008f3063c4 ffff88006f87bb30 ffffffff8171b358 ffff88006bcf3750 ffff88006f87bb68 ffffffff810e09e1 ffff88006e1b1400 ffffea0001b86c00 ffffffff8156d327 ffff880073003500 0000000000000246 Call Trace: [<ffffffff8171b358>] dump_stack+0x4d/0x66 [<ffffffff810e09e1>] debug_check_no_locks_freed+0x171/0x180 [<ffffffff8156d327>] ? __cpufreq_add_dev.isra.21+0x427/0xb80 [<ffffffff8121412b>] kfree+0xab/0x2b0 [<ffffffff8156d327>] __cpufreq_add_dev.isra.21+0x427/0xb80 [<ffffffff81724cf7>] ? _raw_spin_unlock+0x27/0x40 [<ffffffffa003517f>] ? pcc_cpufreq_do_osc+0x17f/0x17f [pcc_cpufreq] [<ffffffff8156da8e>] cpufreq_add_dev+0xe/0x10 [<ffffffff814855d1>] subsys_interface_register+0xc1/0x120 [<ffffffff8156bcf2>] cpufreq_register_driver+0x112/0x340 [<ffffffff8121415a>] ? kfree+0xda/0x2b0 [<ffffffffa003517f>] ? pcc_cpufreq_do_osc+0x17f/0x17f [pcc_cpufreq] [<ffffffffa003562e>] pcc_cpufreq_init+0x4af/0xe81 [pcc_cpufreq] [<ffffffffa003517f>] ? pcc_cpufreq_do_osc+0x17f/0x17f [pcc_cpufreq] [<ffffffff81002144>] do_one_initcall+0xd4/0x210 [<ffffffff811f7472>] ? __vunmap+0xd2/0x120 [<ffffffff81127155>] load_module+0x1315/0x1b70 [<ffffffff811222a0>] ? store_uevent+0x70/0x70 [<ffffffff811229d9>] ? copy_module_from_fd.isra.44+0x129/0x180 [<ffffffff81127b86>] SyS_finit_module+0xa6/0xd0 [<ffffffff81725b69>] system_call_fastpath+0x16/0x1b cpufreq: __cpufreq_add_dev: ->get() failed insmod: ERROR: could not insert module pcc-cpufreq.ko: No such device The warning occurs in the __cpufreq_add_dev() code which does down_write(&policy->rwsem); ... if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { policy->cur = cpufreq_driver->get(policy->cpu); if (!policy->cur) { pr_err("%s: ->get() failed\n", __func__); goto err_get_freq; } If cpufreq_driver->get(policy->cpu) returns an error we execute the code at err_get_freq, which does not up the policy->rwsem. This causes the lockdep warning. Trivial patch to up the policy->rwsem in the error path. After the patch has been applied, and an error occurs in the cpufreq_driver->get(policy->cpu) call we will now see cpufreq: __cpufreq_add_dev: ->get() failed cpufreq: __cpufreq_add_dev: ->get() failed modprobe: ERROR: could not insert 'pcc_cpufreq': No such device Fixes: 4e97b631f24c (cpufreq: Initialize governor for a new policy under policy->rwsem) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22cpufreq: fix cpufreq suspend/resume for intel_pstateLan Tianyu
Cpufreq core introduces cpufreq_suspended flag to let cpufreq sysfs nodes across S2RAM/S2DISK. But the flag is only set in the cpufreq_suspend() for cpufreq drivers which have target or target_index callback. This skips intel_pstate driver. This patch is to set the flag before checking target or target_index callback. Fixes: 2f0aea936360 (cpufreq: suspend governors on system suspend/hibernate) Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22ACPI / scan: Correct error return value of create_modalias()Mika Westerberg
There is a typo, it should be negative -errno instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22ACPI / video: disable native backlight for ThinkPad X201sAaron Lu
The ThinkPad X201s has a working ACPI video backlight interface and is shipped before Win8; then there is BIOS update that starts to query _OSI("Windows 2012") and that would make our video module stop creating backlight interface and caused problem for the user. Add it to the DMI table to disable native backlight to fix this problem. Link: https://bugzilla.kernel.org/show_bug.cgi?id=81691 Link: https://bugzilla.kernel.org/show_bug.cgi?id=51231 Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Reported-and-tested-by: Yves-Alexis Perez <corsac@debian.org> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22KVM: correct null pid check in kvm_vcpu_yield_to()Sam Bobroff
Correct a simple mistake of checking the wrong variable before a dereference, resulting in the dereference not being properly protected by rcu_dereference(). Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-22ALSA: snd-usb-caiaq: Fix LED commands for Kore controllerDaniel Mack
KoreController and KoreController2 need an EP1_CMD_DIMM_LEDS command to set their LEDs, not EP1_CMD_WRITE_IO. Signed-off-by: Daniel Mack <daniel@zonque.org> Reported-and-tested-by: Brad Wilson <brad.wilson.00@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-22ALSA: pcm: fix fifo_size frame calculationClemens Ladisch
The calculated frame size was wrong because snd_pcm_format_physical_width() actually returns the number of bits, not bytes. Use snd_pcm_format_size() instead, which not only returns bytes, but also simplifies the calculation. Fixes: 8bea869c5e56 ("ALSA: PCM midlevel: improve fifo_size handling") Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-22md/raid1: fix_read_error should act on all non-faulty devices.NeilBrown
If a devices is being recovered it is not InSync and is not Faulty. If a read error is experienced on that device, fix_read_error() will be called, but it ignores non-InSync devices. So it will neither fix the error nor fail the device. It is incorrect that fix_read_error() ignores non-InSync devices. It should only ignore Faulty devices. So fix it. This became a bug when we allowed reading from a device that was being recovered. It is suitable for any subsequent -stable kernel. Fixes: da8840a747c0dbf49506ec906757a6b87b9741e9 Cc: stable@vger.kernel.org (v3.5+) Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com> Tested-by: Alexander Lyakas <alex.bolshoy@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22md/raid1: count resync requests in nr_pending.NeilBrown
Both normal IO and resync IO can be retried with reschedule_retry() and so be counted into ->nr_queued, but only normal IO gets counted in ->nr_pending. Before the recent improvement to RAID1 resync there could only possibly have been one or the other on the queue. When handling a read failure it could only be normal IO. So when handle_read_error() called freeze_array() the fact that freeze_array only compares ->nr_queued against ->nr_pending was safe. But now that these two types can interleave, we can have both normal and resync IO requests queued, so we need to count them both in nr_pending. This error can lead to freeze_array() hanging if there is a read error, so it is suitable for -stable. Fixes: 79ef3a8aa1cb1523cc231c9a90a278333c21f761 cc: stable@vger.kernel.org (v3.13+) Reported-by: Brassow Jonathan <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22md/raid1: update next_resync under resync_lock.NeilBrown
raise_barrier() uses next_resync as part of its calculations, so it really should be updated first, instead of afterwards. next_resync is always used under resync_lock so update it under resync lock to, just before it is used. That is safest. This could cause normal IO and resync IO to interact badly so it suitable for -stable. Fixes: 79ef3a8aa1cb1523cc231c9a90a278333c21f761 cc: stable@vger.kernel.org (v3.13+) Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22md/raid1: Don't use next_resync to determine how far resync has progressedNeilBrown
next_resync is (approximately) the location for the next resync request. However it does *not* reliably determine the earliest location at which resync might be happening. This is because resync requests can complete out of order, and we only limit the number of current requests, not the distance from the earliest pending request to the latest. mddev->curr_resync_completed is a reliable indicator of the earliest position at which resync could be happening. It is updated less frequently, but is actually reliable which is more important. So use it to determine if a write request is before the region being resynced and so safe from conflict. This error can allow resync IO to interfere with normal IO which could lead to data corruption. Hence: stable. Fixes: 79ef3a8aa1cb1523cc231c9a90a278333c21f761 cc: stable@vger.kernel.org (v3.13+) Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22md/raid1: make sure resync waits for conflicting writes to complete.NeilBrown
The resync/recovery process for raid1 was recently changed so that writes could happen in parallel with resync providing they were in different regions of the device. There is a problem though: While a write request will always wait for conflicting resync to complete, a resync request will *not* always wait for conflicting writes to complete. Two changes are needed to fix this: 1/ raise_barrier (which waits until it is safe to do resync) must wait until current_window_requests is zero 2/ wait_battier (which waits at the start of a new write request) must update current_window_requests if the request could possible conflict with a concurrent resync. As concurrent writes and resync can lead to data loss, this patch is suitable for -stable. Fixes: 79ef3a8aa1cb1523cc231c9a90a278333c21f761 Cc: stable@vger.kernel.org (v3.13+) Cc: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22md/raid1: clean up request counts properly in close_sync()NeilBrown
If there are outstanding writes when close_sync is called, the change to ->start_next_window might cause them to decrement the wrong counter when they complete. Fix this by merging the two counters into the one that will be decremented. Having an incorrect value in a counter can cause raise_barrier() to hangs, so this is suitable for -stable. Fixes: 79ef3a8aa1cb1523cc231c9a90a278333c21f761 cc: stable@vger.kernel.org (v3.13+) Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-21[media] em28xx-v4l: get rid of field "users" in struct em28xx_v4l2"Frank Schaefer
This reverts commit 747dba7de2a51a3db58b665ed3bc8c07921546ec. It breaks concurrent vbi and video capturing: While v4l2->users is the number of users of the whole device (all device nodes), v4l2_fh_is_singular() only checks the number of users of a specific device node. As a result. if one device node is open and a second device node is opened (closed), the device is reinitialized (streaming is stopped). Reported-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22md/raid1: be more cautious where we read-balance during resync.NeilBrown
commit 79ef3a8aa1cb1523cc231c9a90a278333c21f761 made it possible for reads to happen concurrently with resync. This means that we need to be more careful where read_balancing is allowed during resync - we can no longer be sure that any resync that has already started will definitely finish. So keep read_balancing to before recovery_cp, which is conservative but safe. This bug makes it possible to read from a device that doesn't have up-to-date data, so it can cause data corruption. So it is suitable for any kernel since 3.11. Fixes: 79ef3a8aa1cb1523cc231c9a90a278333c21f761 cc: stable@vger.kernel.org (v3.13+) Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-22md/raid1: intialise start_next_window for READ case to avoid hangNeilBrown
r1_bio->start_next_window is not initialised in the READ case, so allow_barrier may incorrectly decrement conf->current_window_requests which can cause raise_barrier() to block forever. Fixes: 79ef3a8aa1cb1523cc231c9a90a278333c21f761 cc: stable@vger.kernel.org (v3.13+) Reported-by: Brassow Jonathan <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-21[media] em28xx: fix VBI handling logicMauro Carvalho Chehab
When both VBI and video are streaming, and video stream is stopped, a subsequent trial to restart it will fail, because S_FMT will return -EBUSY. That prevents applications like zvbi to work properly. Please notice that, while this fix it fully for zvbi, the best is to get rid of streaming_users and res_get logic as a hole. However, this single-line patch is better to be merged at -stable. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] DocBook media: improve the poll() documentationHans Verkuil
The poll documentation was incomplete: document how events (POLLPRI) are handled and fix the documentation of what poll does for display devices and streaming I/O. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] DocBook media: fix the poll() 'no QBUF' documentationHans Verkuil
Clarify what poll() returns if STREAMON was called but not QBUF. Make explicit the different behavior for this scenario for capture and output devices. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] vb2: fix VBI/poll regressionHans Verkuil
The recent conversion of saa7134 to vb2 unconvered a poll() bug that broke the teletext applications alevt and mtt. These applications expect that calling poll() without having called VIDIOC_STREAMON will cause poll() to return POLLERR. That did not happen in vb2. This patch fixes that behavior. It also fixes what should happen when poll() is called when STREAMON is called but no buffers have been queued. In that case poll() will also return POLLERR, but only for capture queues since output queues will always return POLLOUT anyway in that situation. This brings the vb2 behavior in line with the old videobuf behavior. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] cx2341x: fix kernel oopsHans Verkuil
The v4l2_ctrl_config struct must be zeroed before passing it to v4l2_ctrl_new_custom(). This was always wrong, but with the recent v4l2-ctrls.c changes this is now much more likely to lead to a kernel bug. This is the only place where this struct wasn't initialized properly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Pridvorov Andrey <ua0lnj@bk.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] cx24123: fix kernel oops due to missing parent pointerHans Verkuil
When I try to set the TV standard to e.g. PAL on my Hauppauge WinTV-HVR3000 I get the following oops: 9464.262345] CX24123: detected CX24123 [ 9464.262526] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230 [ 9464.262555] IP: [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0 [ 9464.262576] PGD 0 [ 9464.262584] Oops: 0000 [#1] PREEMPT SMP [ 9464.262597] Modules linked in: cx24123 cx22702 cx88_dvb(+) videobuf_dvb cx88_vp3054_i2c cx88_blackbird cx8802 ir_lirc_codec ir_xmp_decoder ir_sanyo_decoder ir_jvc_decoder ir_mce_kbd_decoder ir_sharp_decoder lirc_dev ir_sony_decoder ir_rc6_decoder ir_nec_decoder ir_rc5_decoder rc_hauppauge wm8775 tuner_simple tuner_types tda9887 cx8800 cx88xx btcx_risc videobuf_dma_sg videobuf_core mt2131 s5h1409 tda8290 tuner cx25840 cx23885 altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core v4l2_common videodev media nouveau x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci [ 9464.262786] CPU: 2 PID: 2417 Comm: modprobe Not tainted 3.17.0-rc1-telek #322 [ 9464.262796] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014 [ 9464.262807] task: ffff881097959ad0 ti: ffff88109967c000 task.ti: ffff88109967c000 [ 9464.262817] RIP: 0010:[<ffffffff816676b5>] [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0 [ 9464.262834] RSP: 0018:ffff88109967fbd8 EFLAGS: 00010246 [ 9464.262843] RAX: 0000000000000000 RBX: ffff880892a89540 RCX: 0000000000000000 [ 9464.262853] RDX: 0000000080000001 RSI: ffff880892e75870 RDI: ffff880892a89540 [ 9464.262862] RBP: ffff88109967fbf8 R08: ffff881099b2ccc0 R09: ffff880891efa088 [ 9464.262872] R10: 0000000000000000 R11: 0000000000000022 R12: 0000000000000000 [ 9464.262883] R13: ffff880892a895b0 R14: 00000000ffffffed R15: ffff88089b48f800 [ 9464.262893] FS: 00007fe42b6d7700(0000) GS:ffff88089fc40000(0000) knlGS:0000000000000000 [ 9464.262904] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9464.262912] CR2: 0000000000000230 CR3: 0000001094078000 CR4: 00000000000407e0 [ 9464.262922] Stack: [ 9464.262927] ffff880892a89540 0000000000000000 ffff880892a895b0 ffff88109a155a80 [ 9464.262944] ffff88109967fc20 ffffffff81666a36 0000000000000020 ffff880892a89540 [ 9464.262960] ffffffffa01c8d40 ffff88109967fc40 ffffffff81666c67 ffff880892a89000 [ 9464.262977] Call Trace: [ 9464.262987] [<ffffffff81666a36>] i2c_register_adapter+0x166/0x340 [ 9464.262998] [<ffffffff81666c67>] i2c_add_adapter+0x57/0x60 [ 9464.263011] [<ffffffffa01e2c58>] cx24123_attach+0x108/0x1ba [cx24123] [ 9464.263025] [<ffffffffa01c5a76>] dvb_register+0x404/0x245b [cx88_dvb] [ 9464.263039] [<ffffffffa0059183>] ? videobuf_queue_core_init+0xe3/0x140 [videobuf_core] [ 9464.263052] [<ffffffffa01c54b1>] cx8802_dvb_probe+0x1e1/0x261 [cx88_dvb] [ 9464.263066] [<ffffffffa01a3b00>] cx8802_register_driver+0x190/0x20d [cx8802] [ 9464.263077] [<ffffffffa01cc000>] ? 0xffffffffa01cc000 [ 9464.263089] [<ffffffffa01cc025>] dvb_init+0x25/0x27 [cx88_dvb] [ 9464.263101] [<ffffffff810002c4>] do_one_initcall+0x84/0x1c0 [ 9464.263113] [<ffffffff811893fa>] ? __vunmap+0x9a/0x100 [ 9464.263125] [<ffffffff81122a66>] load_module+0x1216/0x1790 [ 9464.263134] [<ffffffff8111ff70>] ? __symbol_put+0x70/0x70 [ 9464.263145] [<ffffffff811aa8cc>] ? vfs_read+0x11c/0x170 [ 9464.263156] [<ffffffff811201d9>] ? copy_module_from_fd.isra.53+0x119/0x170 [ 9464.263168] [<ffffffff81123116>] SyS_finit_module+0x76/0x80 [ 9464.263181] [<ffffffff818d19e9>] system_call_fastpath+0x16/0x1b [ 9464.263190] Code: 81 31 c0 e8 2e f6 e8 ff 48 83 c4 08 5b 5d eb de 66 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 41 be ed ff ff ff 48 8b 47 70 <48> 8b 80 30 02 00 00 48 85 c0 74 58 4c 8b 68 08 4d 85 ed 74 4f [ 9464.263347] RIP [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0 [ 9464.263361] RSP <ffff88109967fbd8> [ 9464.263367] CR2: 0000000000000230 [ 9464.266919] ---[ end trace 57fd490bdb72e733 ]--- I traced this to a NULL i2c_adapter parent pointer when cx24123 creates its own i2c adapter. The acpi_i2c_install_space_handler function appeared in 3.17, so that's probably why this hasn't been seen before. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] adv7604: fix inverted conditionHans Verkuil
The log_status function should show HDMI information, but the test checking for an HDMI input was inverted. Fix this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v3.12 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] media/radio: fix radio-miropcm20.c build with io.h header fileRandy Dunlap
Fix build errors in radio-miropcm20.c due to missing header file: drivers/media/radio/radio-miropcm20.c: In function 'rds_waitread': drivers/media/radio/radio-miropcm20.c:90:3: error: implicit declaration of function 'inb' [-Werror=implicit-function-declaration] drivers/media/radio/radio-miropcm20.c: In function 'rds_rawwrite': drivers/media/radio/radio-miropcm20.c:106:3: error: implicit declaration of function 'outb' [-Werror=implicit-function-declaration] Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] vb2: fix plane index sanity check in vb2_plane_cookie()Zhaowei Yuan
It's also invalid when plane_no is equal to vb->num_planes Signed-off-by: Zhaowei Yuan <zhaowei.yuan@samsung.com> Cc: stable@vger.kernel.org # for v3.7 and up Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] DocBook media: update version number and V4L2 changesHans Verkuil
Note: the revision text for the v4l2_pix_format change from Laurent erroneously mentioned 3.16 when it only got merged for 3.17. Fixed that as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] DocBook media: fix fieldname in struct v4l2_subdev_selectionHans Verkuil
Field 'rect' is really named 'r'. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] vb2: fix vb2 state check when start_streaming failsHans Verkuil
Commit bd994ddb2a12a3ff48cd549ec82cdceaea9614df (vb2: Fix stream start and buffer completion race) broke the buffer state check in vb2_buffer_done. So accept all three possible states there since I can no longer tell the difference between vb2_buffer_done called from start_streaming or from elsewhere. Instead add a WARN_ON at the end of start_streaming that will check whether any buffers were added to the done list, since that implies that the wrong state was used as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # for v3.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] videobuf2-core.h: fix commentHans Verkuil
The comment for start_streaming that tells the developer with which vb2 state buffers should be returned to vb2 gave the wrong state. Very confusing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] videobuf2-core: add comments before the WARN_ONHans Verkuil
Recently WARN_ON() calls have been added to warn if the driver is not properly returning buffers to vb2 in start_streaming (if it fails) or stop_streaming(). Add comments before those WARN_ON calls that refer to the videobuf2-core.h header that explains what drivers are supposed to do in these situations. That should help point developers in the right direction if they see these warnings. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] videobuf2-dma-sg: fix for wrong GFP mask to sg_alloc_table_from_pagesHans Verkuil
sg_alloc_table_from_pages() only allocates a sg_table, so it should just use GFP_KERNEL, not gfp_flags. If gfp_flags contains __GFP_DMA32 then mm/sl[au]b.c will call BUG_ON: [ 358.027515] ------------[ cut here ]------------ [ 358.027546] kernel BUG at mm/slub.c:1416! [ 358.027558] invalid opcode: 0000 [#1] PREEMPT SMP [ 358.027576] Modules linked in: mt2131 s5h1409 tda8290 tuner cx25840 cx23885 btcx_risc altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core nouveau zr36067 videocodec v4l2_common videodev media x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci [ 358.027712] CPU: 19 PID: 3654 Comm: cat Not tainted 3.16.0-rc6-telek #167 [ 358.027723] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014 [ 358.027741] task: ffff880897c7d960 ti: ffff88089b4d4000 task.ti: ffff88089b4d4000 [ 358.027753] RIP: 0010:[<ffffffff81196040>] [<ffffffff81196040>] new_slab+0x280/0x320 [ 358.027776] RSP: 0018:ffff88089b4d7ae8 EFLAGS: 00010002 [ 358.027787] RAX: ffff880897c7d960 RBX: 0000000000000000 RCX: ffff88089b4d7b50 [ 358.027798] RDX: 00000000ffffffff RSI: 0000000000000004 RDI: ffff88089f803b00 [ 358.027809] RBP: ffff88089b4d7bb8 R08: 0000000000000000 R09: 0000000100400040 [ 358.027821] R10: 0000160000000000 R11: ffff88109bc02c40 R12: 0000000000000001 [ 358.027832] R13: ffff88089f8000c0 R14: ffff88089f803b00 R15: ffff8810bfcf4be0 [ 358.027845] FS: 00007f83fe5c0700(0000) GS:ffff8810bfce0000(0000) knlGS:0000000000000000 [ 358.027858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 358.027868] CR2: 0000000001dfd568 CR3: 0000001097d5a000 CR4: 00000000000407e0 [ 358.027878] Stack: [ 358.027885] ffffffff81198860 ffff8810bfcf4be0 ffff880897c7d960 0000000000001b00 [ 358.027905] ffff880897c7d960 0000000000000000 ffff8810bfcf4bf0 0000000000000000 [ 358.027924] 0000000000000000 0000000100000100 ffffffff813ef84a 00000004ffffffff [ 358.027944] Call Trace: [ 358.027956] [<ffffffff81198860>] ? __slab_alloc+0x400/0x4e0 [ 358.027973] [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30 [ 358.027985] [<ffffffff81198f17>] __kmalloc+0x127/0x150 [ 358.027997] [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30 [ 358.028009] [<ffffffff813ef84a>] sg_kmalloc+0x1a/0x30 [ 358.028023] [<ffffffff813eff84>] __sg_alloc_table+0x74/0x180 [ 358.028035] [<ffffffff813ef830>] ? sg_kfree+0x20/0x20 [ 358.028048] [<ffffffff813f00af>] sg_alloc_table+0x1f/0x60 [ 358.028061] [<ffffffff813f0174>] sg_alloc_table_from_pages+0x84/0x1f0 [ 358.028077] [<ffffffffa007c3f9>] vb2_dma_sg_alloc+0x159/0x230 [videobuf2_dma_sg] [ 358.028095] [<ffffffffa003d55a>] __vb2_queue_alloc+0x10a/0x680 [videobuf2_core] [ 358.028113] [<ffffffffa003e110>] __reqbufs.isra.14+0x220/0x3e0 [videobuf2_core] [ 358.028130] [<ffffffffa003e79d>] __vb2_init_fileio+0xbd/0x380 [videobuf2_core] [ 358.028147] [<ffffffffa003f563>] __vb2_perform_fileio+0x5b3/0x6e0 [videobuf2_core] [ 358.028164] [<ffffffffa003f871>] vb2_fop_read+0xb1/0x100 [videobuf2_core] [ 358.028184] [<ffffffffa06dd2e5>] v4l2_read+0x65/0xb0 [videodev] [ 358.028198] [<ffffffff811a243f>] vfs_read+0x8f/0x170 [ 358.028210] [<ffffffff811a30a1>] SyS_read+0x41/0xb0 [ 358.028224] [<ffffffff818f02e9>] system_call_fastpath+0x16/0x1b [ 358.028234] Code: 66 90 e9 dc fd ff ff 0f 1f 40 00 41 8b 4d 68 e9 d5 fe ff ff 0f 1f 80 00 00 00 00 f0 41 80 4d 00 40 e9 03 ff ff ff 0f 1f 44 00 00 <0f> 0b 66 0f 1f 44 00 00 44 89 c6 4c 89 45 d0 e8 0c 82 ff ff 48 [ 358.028415] RIP [<ffffffff81196040>] new_slab+0x280/0x320 [ 358.028432] RSP <ffff88089b4d7ae8> [ 358.032208] ---[ end trace 6443240199c706e4 ]--- Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v3.13 and up Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21Linux 3.17-rc6v3.17-rc6Linus Torvalds
2014-09-21parisc: pdc_stable.c: Avoid potential stack overflowsHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2014-09-21Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Fixes for ARM, the most notable being the fix from Nathan Lynch to fix the state of various registers during execve, to ensure that data can't be leaked between two executables. Fixes from Victor Kamensky for get_user() on big endian platforms, since the addition of 8-byte get_user() support broke these fairly badly. A fix from Sudeep Holla for affinity setting when hotplugging CPU 0. A fix from Stephen Boyd for a perf-induced sleep attempt while atomic. Lastly, a correctness fix for emulation of the SWP instruction on ARMv7+, and a fix for wrong carry handling when updating the translation table base address on LPAE platforms" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8149/1: perf: Don't sleep while atomic when enabling per-cpu interrupts ARM: 8148/1: flush TLS and thumbee register state during exec ARM: 8151/1: add missing exports for asm functions required by get_user macro ARM: 8137/1: fix get_user BE behavior for target variable with size of 8 bytes ARM: 8135/1: Fix in-correct barrier usage in SWP{B} emulation ARM: 8133/1: use irq_set_affinity with force=false when migrating irqs ARM: 8132/1: LPAE: drop wrong carry flag correction after adding TTBR1_OFFSET
2014-09-21parisc: pdc_stable.c: Cleaning up unnecessary use of memset in conjunction ↵Rickard Strandqvist
with strncpy Using memset before strncpy just to ensure a trailing null character is an unnecessary double writing of a string Patch modified by Helge Deller to additionally reduce stack usage. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Helge Deller <deller@gmx.de>
2014-09-21parisc: ptrace: use secure_computing_strict()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2014-09-21Merge tag 'media-v3.17-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "some media bug fixes: - a Kconfig dependency issue - some fixes for af9033/it913x demod to be more reliable and address a performance regression - cx18: fix an oops on devices with tda8290 tuner - two new USB IDs for af9035 - a couple fixes on smapp driver" * tag 'media-v3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] af9035: new IDs: add support for PCTV 78e and PCTV 79e [media] af9033: feed clock to RF tuner [media] it913x: init tuner on attach [media] af9033: update IT9135 tuner inittabs [media] Kconfig: do not select SPI bus on sub-driver auto-select [media] cx18: fix kernel oops with tda8290 tuner [media] smiapp: Set sub-device owner [media] smiapp: Fix power count handling
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 23:13:51 +0000