summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-06-09net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdevAndrea Mayer
Commit 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") adds a new entry (flowi_l3mdev) in the common flow struct used for indicating the l3mdev index for later rule and table matching. The l3mdev_update_flow() has been adapted to properly set the flowi_l3mdev based on the flowi_oif/flowi_iif. In fact, when a valid flowi_iif is supplied to the l3mdev_update_flow(), this function can update the flowi_l3mdev entry only if it has not yet been set (i.e., the flowi_l3mdev entry is equal to 0). The SRv6 End.DT6 behavior in VRF mode leverages a VRF device in order to force the routing lookup into the associated routing table. This routing operation is performed by seg6_lookup_any_nextop() preparing a flowi6 data structure used by ip6_route_input_lookup() which, in turn, (indirectly) invokes l3mdev_update_flow(). However, seg6_lookup_any_nexthop() does not initialize the new flowi_l3mdev entry which is filled with random garbage data. This prevents l3mdev_update_flow() from properly updating the flowi_l3mdev with the VRF index, and thus SRv6 End.DT6 (VRF mode)/DT46 behaviors are broken. This patch correctly initializes the flowi6 instance allocated and used by seg6_lookup_any_nexhtop(). Specifically, the entire flowi6 instance is wiped out: in case new entries are added to flowi/flowi6 (as happened with the flowi_l3mdev entry), we should no longer have incorrectly initialized values. As a result of this operation, the value of flowi_l3mdev is also set to 0. The proposed fix can be tested easily. Starting from the commit referenced in the Fixes, selftests [1],[2] indicate that the SRv6 End.DT6 (VRF mode)/DT46 behaviors no longer work correctly. By applying this patch, those behaviors are back to work properly again. [1] - tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh [2] - tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: Anton Makarov <am@3a-alliance.com> Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220608091917.20345-1-andrea.mayer@uniroma2.it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09Merge branch 'nfp-fixes-for-v5-19'Jakub Kicinski
Simon Horman says: ==================== nfp: fixes for v5.19 this short series includes two fixes for the NFP driver. 1. Restructure GRE+VLAN flower offload to address a miss match between the NIC firmware and driver implementation which prevented these features from working in combination. 2. Prevent unnecessary warnings regarding rate limiting support.- It is expected that this feature to not _always_ be present but this was not taken into account when the code to check for this feature was added. ==================== Link: https://lore.kernel.org/r/20220608092901.124780-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09nfp: flower: restructure flow-key for gre+vlan combinationEtienne van der Linde
Swap around the GRE and VLAN parts in the flow-key offloaded by the driver to fit in with other tunnel types and the firmware. Without this change used cases with GRE+VLAN on the outer header does not get offloaded as the flow-key mismatches what the firmware expect. Fixes: 0d630f58989a ("nfp: flower: add support to offload QinQ match") Fixes: 5a2b93041646 ("nfp: flower-ct: compile match sections of flow_payload") Signed-off-by: Etienne van der Linde <etienne.vanderlinde@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09nfp: avoid unnecessary check warnings in nfp_app_get_vf_configFei Qin
nfp_net_sriov_check is added in nfp_app_get_vf_config which intends to ensure ivi->vlan_proto and ivi->max_tx_rate/min_tx_rate can be read from VF config table only when firmware supports corresponding capability. However, "nfp_app_get_vf_config" can be called by commands like "ip a", "ip link set $DEV up" and "ip link set $DEV vf $NUM vlan $param" (with VF). When using commands above, many warnings "ndo_set_vf_<cap_x> not supported" would appear if firmware doesn't support VF rate limit and 802.1ad VLAN assingment. If more VFs are created, things could get worse. Thus, this patch add an extra bool parameter for nfp_net_sriov_check to enable/disable the cap check warning report. Unnecessary warnings in nfp_app_get_vf_config can be avoided. Valid warnings in kinds of vf setting function can be reserved. Fixes: e0d0e1fdf1ed ("nfp: VF rate limit support") Fixes: 59359597b010 ("nfp: support 802.1ad VLAN assingment to VF") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TXMaxim Mikityanskiy
To embrace possible future optimizations of TLS, rename zerocopy sendfile definitions to more generic ones: * setsockopt: TLS_TX_ZEROCOPY_SENDFILE- > TLS_TX_ZEROCOPY_RO * sock_diag: TLS_INFO_ZC_SENDFILE -> TLS_INFO_ZC_RO_TX RO stands for readonly and emphasizes that the application shouldn't modify the data being transmitted with zerocopy to avoid potential disconnection. Fixes: c1318b39c7d3 ("tls: Add opt-in zerocopy mode of sendfile()") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Link: https://lore.kernel.org/r/20220608153425.3151146-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10Merge tag 'drm-misc-fixes-2022-06-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes two fixes for panel self-refresh handling, and one to fix multiple output support on AST. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220609100754.kvrkjy67gqabjuee@houat
2022-06-10Merge tag 'drm-misc-fixes-2022-05-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A use-after-free fix for panfrost, and a DT invalid configuration fix for ti-sn65dsi83 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220526090532.nvhlmwev5qgln3nb@houat
2022-06-09netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_contextDavid Howells
While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09mm: Add kernel-doc for folio->mlock_countMatthew Wilcox (Oracle)
Fix "./include/linux/mm_types.h:279: warning: Function parameter or member 'mlock_count' not described in 'folio'". Also neaten the html by hiding the anon struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-06-09mm/huge_memory: Fix xarray node memory leakMatthew Wilcox (Oracle)
If xas_split_alloc() fails to allocate the necessary nodes to complete the xarray entry split, it sets the xa_state to -ENOMEM, which xas_nomem() then interprets as "Please allocate more memory", not as "Please free any unnecessary memory" (which was the intended outcome). It's confusing to use xas_nomem() to free memory in this context, so call xas_destroy() instead. Reported-by: syzbot+9e27a75a8c24f3fe75c1@syzkaller.appspotmail.com Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache") Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-06-09filemap: Cache the value of vm_flagsMatthew Wilcox (Oracle)
After we have unlocked the mmap_lock for I/O, the file is pinned, but the VMA is not. Checking this flag after that can be a use-after-free. It's not a terribly interesting use-after-free as it can only read one bit, and it's used to decide whether to read 2MB or 4MB. But it upsets the automated tools and it's generally bad practice anyway, so let's fix it. Reported-by: syzbot+5b96d55e5b54924c77ad@syzkaller.appspotmail.com Fixes: 4687fdbb805a ("mm/filemap: Support VM_HUGEPAGE for file mappings") Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-06-09filemap: Don't release a locked folioMatthew Wilcox (Oracle)
We must hold a reference over the call to filemap_release_folio(), otherwise the page cache will put the last reference to the folio before we unlock it, leading to splats like this: BUG: Bad page state in process u8:5 pfn:1ab1f4 page:ffffea0006ac7d00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x28b1de pfn:0x1ab1f4 flags: 0x17ff80000040001(locked|reclaim|node=0|zone=2|lastcpupid=0xfff) raw: 017ff80000040001 dead000000000100 dead000000000122 0000000000000000 raw: 000000000028b1de 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set It's an error path, so it doesn't see much testing. Reported-by: Darrick J. Wong <djwong@kernel.org> Fixes: a42634a6c07d ("readahead: Use a folio in read_pages()") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-06-09MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.Yupeng Li
set cpu_hwmon as a module build with loongson_sysconf, loongson_chiptemp undefined error,fix cpu_hwmon compile options to be bool.Some kernel compilation error information is as follows: Checking missing-syscalls for N32 CALL scripts/checksyscalls.sh Checking missing-syscalls for O32 CALL scripts/checksyscalls.sh CALL scripts/checksyscalls.sh CHK include/generated/compile.h CC [M] drivers/platform/mips/cpu_hwmon.o Building modules, stage 2. MODPOST 200 modules ERROR: "loongson_sysconf" [drivers/platform/mips/cpu_hwmon.ko] undefined! ERROR: "loongson_chiptemp" [drivers/platform/mips/cpu_hwmon.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92：__modpost] 错误 1 make: *** [Makefile:1261：modules] 错误 2 Signed-off-by: Yupeng Li <liyupeng@zbhlos.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-06-09Merge tag 'fs_for_v5.19-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2, writeback, and quota fixes and cleanups from Jan Kara: "A fix for race in writeback code and two cleanups in quota and ext2" * tag 'fs_for_v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Prevent memory allocation recursion while holding dq_lock writeback: Fix inode->i_io_list not be protected by inode->i_lock error fs: Fix syntax errors in comments
2022-06-09Merge tag 'powerpc-5.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - On 32-bit fix overread/overwrite of thread_struct via ptrace PEEK/POKE. - Fix softirqs not switching to the softirq stack since we moved irq_exit(). - Force thread size increase when KASAN is enabled to avoid stack overflows. - On Book3s 64 mark more code as not to be instrumented by KASAN to avoid crashes. - Exempt __get_wchan() from KASAN checking, as it's inherently racy. - Fix a recently introduced crash in the papr_scm driver in some configurations. - Remove include of <generated/compile.h> which is forbidden. Thanks to Ariel Miculas, Chen Jingwen, Christophe Leroy, Erhard Furtner, He Ying, Kees Cook, Masahiro Yamada, Nageswara R Sastry, Paul Mackerras, Sachin Sant, Vaibhav Jain, and Wanming Hu. * tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Fix overread/overwrite of thread_struct via ptrace powerpc/book3e: get rid of #include <generated/compile.h> powerpc/kasan: Force thread size increase with KASAN powerpc/papr_scm: don't requests stats with '0' sized stats buffer powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK powerpc/kasan: Silence KASAN warnings in __get_wchan() powerpc/kasan: Mark more real-mode code as not to be instrumented
2022-06-09Merge tag 'net-5.19-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - regressions: - eth: amt: fix possible null-ptr-deref in amt_rcv() Previous releases - regressions: - tcp: use alloc_large_system_hash() to allocate table_perturb - af_unix: fix a data-race in unix_dgram_peer_wake_me() - nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling - eth: ixgbe: fix unexpected VLAN rx in promisc mode on VF Previous releases - always broken: - ipv6: fix signed integer overflow in __ip6_append_data - netfilter: - nat: really support inet nat without l3 address - nf_tables: memleak flow rule from commit path - bpf: fix calling global functions from BPF_PROG_TYPE_EXT programs - openvswitch: fix misuse of the cached connection on tuple changes - nfc: nfcmrvl: fix memory leak in nfcmrvl_play_deferred - eth: altera: fix refcount leak in altera_tse_mdio_create Misc: - add Quentin Monnet to bpftool maintainers" * tag 'net-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) net: amd-xgbe: fix clang -Wformat warning tcp: use alloc_large_system_hash() to allocate table_perturb net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHY net: dsa: mv88e6xxx: correctly report serdes link failure net: dsa: mv88e6xxx: fix BMSR error to be consistent with others net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete net: altera: Fix refcount leak in altera_tse_mdio_create net: openvswitch: fix misuse of the cached connection on tuple changes net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag ip_gre: test csum_start instead of transport header au1000_eth: stop using virt_to_bus() ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg ipv6: Fix signed integer overflow in __ip6_append_data nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION net: ipv6: unexport __init-annotated seg6_hmac_init() net: xfrm: unexport __init-annotated xfrm4_protocol_init() net: mdio: unexport __init-annotated mdio_bus_init() ...
2022-06-09docs: arm: tcm: Fix typo in description of TCM and MMU usageSimon Horman
Correct a typo in the description of interaction between the TCM and MMU. Found by inspection. Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220609184230.627958-1-simon.horman@corigine.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-10scripts/check-local-export: avoid 'wait $!' for process substitutionMasahiro Yamada
Bash 4.4, released in 2016, supports 'wait $!' to check the exit status of a process substitution, but it seems too new. Some people using older bash versions (on CentOS 7, Ubuntu 16.04, etc.) reported an error like this: ./scripts/check-local-export: line 54: wait: pid 17328 is not a child of this shell I used the process substitution to avoid a pipeline, which executes each command in a subshell. If the while-loop is executed in the subshell context, variable changes within are lost after the subshell terminates. Fortunately, Bash 4.2, released in 2011, supports the 'lastpipe' option, which makes the last element of a pipeline run in the current shell process. Switch to the pipeline with 'lastpipe' solution, and also set 'pipefail' to catch errors from ${NM}. Add the bash requirement to Documentation/process/changes.rst. Fixes: 31cb50b5590f ("kbuild: check static EXPORT_SYMBOL* by script instead of modpost") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Wang Yugui <wangyugui@e16-tech.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-06-09netfs: gcc-12: temporarily disable '-Wattribute-warning' for nowLinus Torvalds
This is a pure band-aid so that I can continue merging stuff from people while some of the gcc-12 fallout gets sorted out. In particular, gcc-12 is very unhappy about the kinds of pointer arithmetic tricks that netfs does, and that makes the fortify checks trigger in afs and ceph: In function ‘fortify_memset_chk’, inlined from ‘netfs_i_context_init’ at include/linux/netfs.h:327:2, inlined from ‘afs_set_netfs_context’ at fs/afs/inode.c:61:2, inlined from ‘afs_root_iget’ at fs/afs/inode.c:543:2: include/linux/fortify-string.h:258:25: warning: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 258 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and the reason is that netfs_i_context_init() is passed a 'struct inode' pointer, and then it does struct netfs_i_context *ctx = netfs_i_context(inode); memset(ctx, 0, sizeof(*ctx)); where that netfs_i_context() function just does pointer arithmetic on the inode pointer, knowing that the netfs_i_context is laid out immediately after it in memory. This is all truly disgusting, since the whole "netfs_i_context is laid out immediately after it in memory" is not actually remotely true in general, but is just made to be that way for afs and ceph. See for example fs/cifs/cifsglob.h: struct cifsInodeInfo { struct { /* These must be contiguous */ struct inode vfs_inode; /* the VFS's inode record */ struct netfs_i_context netfs_ctx; /* Netfslib context */ }; [...] and realize that this is all entirely wrong, and the pointer arithmetic that netfs_i_context() is doing is also very very wrong and wouldn't give the right answer if netfs_ctx had different alignment rules from a 'struct inode', for example). Anyway, that's just a long-winded way to say "the gcc-12 warning is actually quite reasonable, and our code happens to work but is pretty disgusting". This is getting fixed properly, but for now I made the mistake of thinking "the week right after the merge window tends to be calm for me as people take a breather" and I did a sustem upgrade. And I got gcc-12 as a result, so to continue merging fixes from people and not have the end result drown in warnings, I am fixing all these gcc-12 issues I hit. Including with these kinds of temporary fixes. Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/all/AEEBCF5D-8402-441D-940B-105AA718C71F@chromium.org/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09gcc-12: disable '-Warray-bounds' universally for nowLinus Torvalds
In commit 8b202ee21839 ("s390: disable -Warray-bounds") the s390 people disabled the '-Warray-bounds' warning for gcc-12, because the new logic in gcc would cause warnings for their use of the S390_lowcore macro, which accesses absolute pointers. It turns out gcc-12 has many other issues in this area, so this takes that s390 warning disable logic, and turns it into a kernel build config entry instead. Part of the intent is that we can make this all much more targeted, and use this conflig flag to disable it in only particular configurations that cause problems, with the s390 case as an example: select GCC12_NO_ARRAY_BOUNDS and we could do that for other configuration cases that cause issues. Or we could possibly use the CONFIG_CC_NO_ARRAY_BOUNDS thing in a more targeted way, and disable the warning only for particular uses: again the s390 case as an example: KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_CC_NO_ARRAY_BOUNDS),-Wno-array-bounds) but this ends up just doing it globally in the top-level Makefile, since the current issues are spread fairly widely all over: KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds We'll try to limit this later, since the gcc-12 problems are rare enough that *much* of the kernel can be built with it without disabling this warning. Cc: Kees Cook <keescook@chromium.org> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09mellanox: mlx5: avoid uninitialized variable warning with gcc-12Linus Torvalds
gcc-12 started warning about 'tracker' being used uninitialized: drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’: drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized] 786 | struct lag_tracker tracker; | ^~~~~~~ which seems to be because it doesn't track how the use (and initialization) is bound by the 'do_bond' flag. But admittedly that 'do_bond' usage is fairly complicated, and involves passing it around as an argument to helper functions, so it's somewhat understandable that gcc doesn't see how that all works. This function could be rewritten to make the use of that tracker variable more obviously safe, but for now I'm just adding the forced initialization of it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09gcc-12: disable '-Wdangling-pointer' warning for nowLinus Torvalds
While the concept of checking for dangling pointers to local variables at function exit is really interesting, the gcc-12 implementation is not compatible with reality, and results in false positives. For example, gcc sees us putting things on a local list head allocated on the stack, which involves exactly those kinds of pointers to the local stack entry: In function ‘__list_add’, inlined from ‘list_add_tail’ at include/linux/list.h:102:2, inlined from ‘rebuild_snap_realms’ at fs/ceph/snap.c:434:2: include/linux/list.h:74:19: warning: storing the address of local variable ‘realm_queue’ in ‘*&realm_27(D)->rebuild_item.prev’ [-Wdangling-pointer=] 74 | new->prev = prev; | ~~~~~~~~~~^~~~~~ But then gcc - understandably - doesn't really understand the big picture how the doubly linked list works, so doesn't see how we then end up emptying said list head in a loop and the pointer we added has been removed. Gcc also complains about us (intentionally) using this as a way to store a kind of fake stack trace, eg drivers/acpi/acpica/utdebug.c:40:38: warning: storing the address of local variable ‘current_sp’ in ‘acpi_gbl_entry_stack_pointer’ [-Wdangling-pointer=] 40 | acpi_gbl_entry_stack_pointer = &current_sp; | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ which is entirely reasonable from a compiler standpoint, and we may want to change those kinds of patterns, but not not. So this is one of those "it would be lovely if the compiler were to complain about us leaving dangling pointers to the stack", but not this way. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09drm: imx: fix compiler warning with gcc-12Linus Torvalds
Gcc-12 correctly warned about this code using a non-NULL pointer as a truth value: drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’: drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address] 72 | if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base) | ^ due to the extraneous '&' address-of operator. Philipp Zabel points out that The mistake had no adverse effect since the following condition doesn't actually dereference the NULL pointer, but the intent of the code was obviously to check for it, not to take the address of the member. Fixes: eb8c88808c83 ("drm/imx: add deferred plane disabling") Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09docs: Move the HTE documentation to driver-api/Jonathan Corbet
The hardware timestamp engine documentation is driver API material, and really belongs in the driver-API book; move it there. Cc: Thierry Reding <treding@nvidia.com> Acked-by: Dipen Patel <dipenp@nvidia.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-09docs: usb: fix literal block marker in usbmon verification exampleJustin Swartz
The "Verify that bus sockets are present" example was not properly formatted due to a typo in the literal block marker. Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Link: https://lore.kernel.org/r/20220604155431.23246-1-justin.swartz@risingedge.co.za Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-09Documentation/features: Update the arch support status filesZheng Zengkai
The arch support status files don't match reality as of v5.19-rc1, use the features-refresh.sh to refresh all the arch-support.txt files in place. The main effect is to add entries for the new loong architecture. Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Link: https://lore.kernel.org/r/20220609025656.143460-1-zhengzengkai@huawei.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-09drm: Add support for the LogiCVC display controllerPaul Kocialkowski
Introduces a driver for the LogiCVC display controller, a programmable logic controller optimized for use in Xilinx Zynq-7000 SoCs and other Xilinx FPGAs. The controller is mostly configured at logic synthesis time so only a subset of configuration is left for the driver to handle. The following features are implemented and tested: - LVDS 4-bit interface; - RGB565 pixel formats; - Multiple layers and hardware composition; - Layer-wide alpha mode; The following features are implemented but untested: - Other RGB pixel formats; - Layer framebuffer configuration for version 4; - Lowest-layer used as background color; - Per-pixel alpha mode. The following features are not implemented: - YUV pixel formats; - DVI, LVDS 3-bit, ITU656 and camera link interfaces; - External parallel input for layer; - Color-keying; - LUT-based alpha modes. Additional implementation-specific notes: - Panels are only enabled after the first page flip to avoid flashing a white screen. - Depth used in context of the LogiCVC driver only counts color components to match the definition of the synthesis parameters. Support is implemented for both version 3 and 4 of the controller. With version 3, framebuffers are stored in a dedicated contiguous memory area, with a base address hardcoded for each layer. This requires using a dedicated CMA pool registered at the base address and tweaking a few offset-related registers to try to use any buffer allocated from the pool. This is done on a best-effort basis to have the hardware cope with the DRM framebuffer allocation model and there is no guarantee that each buffer allocated by GEM CMA can be used for any layer. In particular, buffers allocated below the base address for a layer are guaranteed not to be configurable for that layer. See the implementation of logicvc_layer_buffer_find_setup for specifics. Version 4 allows configuring each buffer address directly, which guarantees that any buffer can be configured. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220520141555.1429041-2-paul.kocialkowski@bootlin.com
2022-06-09Revert "fbdev: Prevent probing generic drivers if a FB is already registered"Daniel Vetter
This reverts commit fb561bf9abde49f7e00fdbf9ed2ccf2d86cac8ee. With commit 27599aacbaefcbf2af7b06b0029459bbf682000d Author: Thomas Zimmermann <tzimmermann@suse.de> Date: Tue Jan 25 10:12:18 2022 +0100 fbdev: Hot-unplug firmware fb devices on forced removal this should be fixed properly and we can remove this somewhat hackish check here (e.g. this won't catch drm drivers if fbdev emulation isn't enabled). Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Zack Rusin <zackr@vmware.com> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Zack Rusin <zackr@vmware.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Ilya Trukhanov <lahvuun@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Cc: Peter Jones <pjones@redhat.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-5-javierm@redhat.com
2022-06-09fbdev: Disable sysfb device registration when removing conflicting FBsJavier Martinez Canillas
The platform devices registered by sysfb match with firmware-based DRM or fbdev drivers, that are used to have early graphics using a framebuffer provided by the system firmware. DRM or fbdev drivers later are probed and remove conflicting framebuffers, leading to these platform devices for generic drivers to be unregistered. But the current solution has a race, since the sysfb_init() function could be called after a DRM or fbdev driver is probed and request to unregister the devices for drivers with conflicting framebuffes. To prevent this, disable any future sysfb platform device registration by calling sysfb_disable(), if a driver requests to remove the conflicting framebuffers. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-4-javierm@redhat.com
2022-06-09firmware: sysfb: Add sysfb_disable() helper functionJavier Martinez Canillas
This can be used by subsystems to unregister a platform device registered by sysfb and also to disable future platform device registration in sysfb. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-3-javierm@redhat.com
2022-06-09firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointerJavier Martinez Canillas
This function just returned 0 on success or an errno code on error, but it could be useful for sysfb_init() callers to have a pointer to the device. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-2-javierm@redhat.com
2022-06-09powerpc/32: Fix overread/overwrite of thread_struct via ptraceMichael Ellerman
The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process to read/write registers of another process. To get/set a register, the API takes an index into an imaginary address space called the "USER area", where the registers of the process are laid out in some fashion. The kernel then maps that index to a particular register in its own data structures and gets/sets the value. The API only allows a single machine-word to be read/written at a time. So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels. The way floating point registers (FPRs) are addressed is somewhat complicated, because double precision float values are 64-bit even on 32-bit CPUs. That means on 32-bit kernels each FPR occupies two word-sized locations in the USER area. On 64-bit kernels each FPR occupies one word-sized location in the USER area. Internally the kernel stores the FPRs in an array of u64s, or if VSX is enabled, an array of pairs of u64s where one half of each pair stores the FPR. Which half of the pair stores the FPR depends on the kernel's endianness. To handle the different layouts of the FPRs depending on VSX/no-VSX and big/little endian, the TS_FPR() macro was introduced. Unfortunately the TS_FPR() macro does not take into account the fact that the addressing of each FPR differs between 32-bit and 64-bit kernels. It just takes the index into the "USER area" passed from userspace and indexes into the fp_state.fpr array. On 32-bit there are 64 indexes that address FPRs, but only 32 entries in the fp_state.fpr array, meaning the user can read/write 256 bytes past the end of the array. Because the fp_state sits in the middle of the thread_struct there are various fields than can be overwritten, including some pointers. As such it may be exploitable. It has also been observed to cause systems to hang or otherwise misbehave when using gdbserver, and is probably the root cause of this report which could not be easily reproduced: https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/ Rather than trying to make the TS_FPR() macro even more complicated to fix the bug, or add more macros, instead add a special-case for 32-bit kernels. This is more obvious and hopefully avoids a similar bug happening again in future. Note that because 32-bit kernels never have VSX enabled the code doesn't need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to ensure that 32-bit && VSX is never enabled. Fixes: 87fec0514f61 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds") Cc: stable@vger.kernel.org # v3.13+ Reported-by: Ariel Miculas <ariel.miculas@belden.com> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au
2022-06-09drm/mgag200: Include <linux/vmalloc.h> for G200 BIOS codeThomas Zimmermann
After moving the vmalloc() call to another file, the rsp include statement needs to be moved as well. Resolves a build warning on parisc. drivers/gpu/drm/mgag200/mgag200_g200.c: In function 'mgag200_g200_init_refclk': drivers/gpu/drm/mgag200/mgag200_g200.c:120:16: error: implicit declaration of function 'vmalloc'; did you mean 'kvmalloc'? [-Werror=implicit-function-declaration] Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 85397f6bc4ff ("drm/mgag200: Initialize each model in separate function") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://lore.kernel.org/all/202206080734.ztAvDG7O-lkp@intel.com/ Link: https://patchwork.freedesktop.org/patch/msgid/20220608115122.7448-1-tzimmermann@suse.de
2022-06-09Merge tag 'intel-gpio-v5.19-2' of ↵Bartosz Golaszewski
gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current intel-gpio for v5.19-2 * Convert IRQ chips in Diolan and Intel GPIO drivers to be immutable
2022-06-09drm/ast: Support multiple outputsThomas Zimmermann
Systems with AST graphics can have multiple output; typically VGA plus some other port. Record detected output chips in a bitmask and initialize each output on its own. Assume a VGA output by default and use SIL164 and DP501 if available. For ASTDP assume that it can run in parallel with VGA. Tested on AST2100. v3: * define a macro for each BIT(ast_tx_chip) (Patrik) v2: * make VGA/SIL164/DP501 mutually exclusive Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Fixes: a59b026419f3 ("drm/ast: Initialize encoder and connector for VGA in helper function") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220607092008.22123-2-tzimmermann@suse.de (cherry picked from commit 7f35680ada234ce00828b8ea841ba7ca1e00ff52) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2022-06-09Merge tag 'amd-drm-fixes-5.19-2022-06-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.19-2022-06-08: amdgpu: - DCN 3.1 golden settings fix - eDP fixes - DMCUB fixes - GFX11 fixes and cleanups - VCN fix for yellow carp - GMC11 fixes - RAS fixes - GPUVM TLB flush fixes - SMU13 fixes - VCN3 AV1 regression fix - VCN2 JPEG fix - Other misc fixes amdkfd: - MMU notifier fix - Support for more GC 10.3.x families - Pinned BO handling fix - Partial migration bug fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220608203008.6187-1-alexander.deucher@amd.com
2022-06-09drm/virtio: Fix NULL vs IS_ERR checking in virtio_gpu_object_shmem_initMiaoqian Lin
Since drm_prime_pages_to_sg() function return error pointers. The drm_gem_shmem_get_sg_table() function returns error pointers too. Using IS_ERR() to check the return value to fix this. Fixes: 2f2aa13724d5 ("drm/virtio: move virtio_gpu_mem_entry initialization to new function") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220602104223.54527-1-linmq006@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-06-09udmabuf: Set the DMA mask for the udmabuf device (v2)Vivek Kasireddy
If the DMA mask is not set explicitly, the following warning occurs when the userspace tries to access the dma-buf via the CPU as reported by syzbot here: WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188 __dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Modules linked in: CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0 83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45 31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00 RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408 RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002 R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000 FS: 0000555556e30300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264 get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72 begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126 dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164 dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f62fcf530f9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9 RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006 RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> v2: Dont't forget to deregister if DMA mask setup fails. Reported-by: syzbot+10e27961f4da37c443b2@syzkaller.appspotmail.com Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220520205235.3687336-1-vivek.kasireddy@intel.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-06-09drm/virtio: simplify the return expressionMinghao Chi
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: http://patchwork.freedesktop.org/patch/msgid/20220429054911.3851977-1-chi.minghao@zte.com.cn Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-06-09drm/qxl: remove qxl_log_level globalTom Rix
Smatch reports this issue qxl_kms.c:36:5: warning: symbol 'qxl_log_level' was not declared. Should it be static? qxl_log_level is defined qxl_kms.c but unused, so remove. Signed-off-by: Tom Rix <trix@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220421142054.3751507-1-trix@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-06-09drm/bochs: Explicitly include linux/module.hMichel Dänzer
Instead of relying on it getting pulled in indirectly. Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20220413161259.1854270-1-michel@daenzer.net Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-06-09virtio-gpu: fix a missing check to avoid NULL dereferenceXiaomeng Tong
'cache_ent' could be set NULL inside virtio_gpu_cmd_get_capset() and it will lead to a NULL dereference by a lately use of it (i.e., ptr = cache_ent->caps_cache). Fix it with a NULL check. Fixes: 62fb7a5e10962 ("virtio-gpu: add 3d/virgl support") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220327050945.1614-1-xiam0nd.tong@gmail.com [ kraxel: minor codestyle fixup ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-06-09vdpa: make get_vq_group and set_group_asid optionalJason Wang
This patch makes get_vq_group and set_group_asid optional. This is needed to unbreak the vDPA parent that doesn't support multiple address spaces. Cc: Gautam Dawar <gautam.dawar@xilinx.com> Fixes: aaca8373c4b1 ("vhost-vdpa: support ASID based IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220609041901.2029-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09virtio: Fix all occurences of the "the the" typoBo Liu
There are double "the" in message in file virtio_mmio.c and virtio_pci_modern_dev.c, fix it. Signed-off-by: Bo Liu <liubo03@inspur.com> Message-Id: <20220609031106.2161-1-liubo03@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-08net: amd-xgbe: fix clang -Wformat warningJustin Stitt
see warning: | drivers/net/ethernet/amd/xgbe/xgbe-drv.c:2787:43: warning: format specifies | type 'unsigned short' but the argument has type 'int' [-Wformat] | netdev_dbg(netdev, "Protocol: %#06hx\n", ntohs(eth->h_proto)); | ~~~~~~ ^~~~~~~~~~~~~~~~~~~ Variadic functions (printf-like) undergo default argument promotion. Documentation/core-api/printk-formats.rst specifically recommends using the promoted-to-type's format flag. Also, as per C11 6.3.1.1: (https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf) `If an int can represent all values of the original type ..., the value is converted to an int; otherwise, it is converted to an unsigned int. These are called the integer promotions.` Since the argument is a u16 it will get promoted to an int and thus it is most accurate to use the %x format specifier here. It should be noted that the `#06` formatting sugar does not alter the promotion rules. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt <jstitt007@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220607191119.20686-1-jstitt007@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08tcp: use alloc_large_system_hash() to allocate table_perturbMuchun Song
In our server, there may be no high order (>= 6) memory since we reserve lots of HugeTLB pages when booting. Then the system panic. So use alloc_large_system_hash() to allocate table_perturb. Fixes: e9261476184b ("tcp: dynamically allocate the perturb table used by source ports") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220607070214.94443-1-songmuchun@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHYAlvin Šipraga
Since commit a18e6521a7d9 ("net: phylink: handle NA interface mode in phylink_fwnode_phy_connect()"), phylib defaults to GMII when no phy-mode or phy-connection-type property is specified in a DSA port node of the device tree. The same commit caused a regression in rtl8365mb whereby phylink would fail to connect, because the driver did not advertise support for GMII for ports with internal PHY. It should be noted that the aforementioned regression is not because the blamed commit was incorrect: on the contrary, the blamed commit is correcting the previous behaviour whereby unspecified phy-mode would cause the internal interface mode to be PHY_INTERFACE_MODE_NA. The rtl8365mb driver only worked by accident before because it _did_ advertise support for PHY_INTERFACE_MODE_NA, despite NA being reserved for internal use by phylink. With one mistake fixed, the other was exposed. Commit a5dba0f207e5 ("net: dsa: rtl8365mb: add GMII as user port mode") then introduced implicit support for GMII mode on ports with internal PHY to allow a PHY connection for device trees where the phy-mode is not explicitly set to "internal". At this point everything was working OK again. Subsequently, commit 6ff6064605e9 ("net: dsa: realtek: convert to phylink_generic_validate()") broke this behaviour again by discarding the usage of rtl8365mb_phy_mode_supported() - where this GMII support was indicated - while switching to the new .phylink_get_caps API. With the new API, rtl8365mb_phy_mode_supported() is no longer needed. Remove it altogether and add back the GMII capability - this time to rtl8365mb_phylink_get_caps() - so that the above default behaviour works for ports with internal PHY again. Fixes: 6ff6064605e9 ("net: dsa: realtek: convert to phylink_generic_validate()") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220607184624.417641-1-alvin@pqrs.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-07 This series contains updates to ixgbe driver only. Olivier Matz resolves an issue so that broadcast packets can still be received when VF removes promiscuous settings and removes setting of VLAN promiscuous, in promiscuous mode, to prevent a loop when VFs are bridged. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ixgbe: fix unexpected VLAN Rx in promisc mode on VF ixgbe: fix bcast packets Rx on VF after promisc removal ==================== Link: https://lore.kernel.org/r/20220607181538.748786-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08Merge branch 'mv88e6xxx-fixes-for-reading-serdes-state'Jakub Kicinski
Russell King says: ==================== mv88e6xxx: fixes for reading serdes state These are some low-priority fixes to the mv88e6xxx serdes code. Patch 1 fixes the reporting of an_complete, which is used in the emulation of a conventional C22 PHY. Patch from Marek. Patch 2 makes one of the error messages in patch 2 to be consistent with the other error messages in this function. Patch 3 ensures that we do not miss a link-failure event. ==================== Link: https://lore.kernel.org/r/Yp82TyoLon9jz6k3@shell.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: dsa: mv88e6xxx: correctly report serdes link failureRussell King (Oracle)
Phylink wants to know if the link has dropped since the last time state was retrieved, and the BMSR gives us that. Read the BMSR and use it when deciding the link state. Fill in the an_complete member as well for the emulated PHY state. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 11:11:41 +0000