| Age | Commit message (Collapse) | Author |
|---|
|
__clk_rcg2_configure function does 2 things -
configures parent and mnd values. In order to
be able to add new clock options, we should split.
Move __clk_rcg2_configure logic on 2 functions:
- __clk_rcg2_configure_parent which configures clock parent
- __clk_rcg2_configure_mnd which configures mnd values
__clk_rcg2_configure delegates to mentioned functions.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20241118-starqltechn_integration_upstream-v8-2-ac8e36a3aa65@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update calc_rate docs to reflect, that pre_div
is not pure divisor, but a register value, and requires conversion.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20241118-starqltechn_integration_upstream-v8-1-ac8e36a3aa65@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Allowing the usb_2 controller GDSC to be turned off during system suspend
renders the controller unable to resume.
So use PWRSTS_RET_ON instead in order to make sure this the GDSC doesn't
go down.
Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-clk-gcc-fix-usb2-gdsc-pwrsts-v1-1-e15d1a5e7d80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The gcc_xo_clk is required for the functionality of the WiFi
copy engine block. Therefore, add the gcc_xo_clk in gcc driver.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20241210064110.130466-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GCC_XO_CLK is required for the functionality of the WiFi
copy engine block. Therefore, add the GCC_XO_CLK macro.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241210064110.130466-2-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The gcc_apss_dbg clk is access protected by trust zone, and accessing
it results in a kernel crash. Therefore remove the gcc_apss_dbg_clk macro.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20241217113909.3522305-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The gcc_apss_dbg clk is access protected by trust zone, and accessing
it results in a kernel crash. Therefore remove the gcc_apss_dbg_clk
from the gcc driver.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20241217113909.3522305-2-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The camera clocks on SDM670 and SDM845 have no significant differences
that would require a change in the clock controller driver. The only
difference is the clock frequency at each level of the power domains,
which is not specified in the clock driver. There should still be a
compatible specific to the SoC, so add the compatible for SDM670 with
the SDM845 compatible as fallback.
Link: https://android.googlesource.com/kernel/msm/+/d4dc50c0a9291bd99895d4844f973421c047d267/drivers/clk/qcom/camcc-sdm845.c#2048
Suggested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Suggested-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/linux-arm-msm/7d26a62b-b898-4737-bd53-f49821e3b471@linaro.org
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241218231729.270137-8-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On APQ8064 the DSI2_PIXEL_SRC clock can be used either to drive the
second DSI host or to drive the LCDC controller. Add LVDS PLL as
possible source to the clock and LVDS output clock. The DSI2_PIXEL_SRC
clock has separate path to be used for the LVDS clock. To represent
both DSI and LVDS clocks properly, add intermediate clock which toggles
the enable bit and make DSI2_PIXEL_CLK clock just check for the HALT
bit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-apq8064-fix-mmcc-v1-4-c95d2e2bf143@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
LVDS clocks require 1:1 ration support in the table used by
clk_rcg_pixel_ops. Add corresponding divider to the table.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241224-apq8064-fix-mmcc-v1-3-c95d2e2bf143@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
APQ8064 / MSM8960 have separate LVDS / LCDC clock, driving the MDP4 LCD
controller. Add corresponding indices to clock controller bindings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241224-apq8064-fix-mmcc-v1-2-c95d2e2bf143@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
APQ8064 / MSM8960 have separate LVDS PLL driving the LVDS / LCDC clock.
Add corresponding input to clock controller bindings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241224-apq8064-fix-mmcc-v1-1-c95d2e2bf143@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The CMN PLL clock controller supplies clocks to the hardware
blocks that together make up the Ethernet function on Qualcomm
IPQ SoCs and to GCC. The driver is initially supported for
IPQ9574 SoC.
The CMN PLL clock controller expects a reference input clock
from the on-board Wi-Fi block acting as clock source. The input
reference clock needs to be configured to one of the supported
clock rates.
The controller supplies a number of fixed-rate output clocks.
For the IPQ9574, there is one output clock of 353 MHZ to PPE
(Packet Process Engine) hardware block, three 50 MHZ output
clocks and an additional 25 MHZ output clock supplied to the
connected Ethernet devices. The PLL also supplies a 24 MHZ
clock as XO and a 32 KHZ sleep clock to GCC, and one 31.25
MHZ clock to PCS.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-2-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
clk-for-6.14
Merge the IPQ CMN PLL clock binding through a topic branch to make it
available to DeviceTree source branches as well.
|
|
The CMN PLL controller provides clocks to networking hardware blocks
and to GCC on Qualcomm IPQ9574 SoC. It receives input clock from the
on-chip Wi-Fi, and produces output clocks at fixed rates. These output
rates are predetermined, and are unrelated to the input clock rate.
The primary purpose of CMN PLL is to supply clocks to the networking
hardware such as PPE (packet process engine), PCS and the externally
connected switch or PHY device. The CMN PLL block also outputs fixed
rate clocks to GCC, such as 24 MHZ as XO clock and 32 KHZ as sleep
clock supplied to GCC.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-1-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add driver for Display clock controller (DISPCC) in Qualcomm SM8750.
The device has several differences against SM8650, including new Pongo
PLLs and different clock parents, thus no compatibility or driver
re-usage.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-3-6f42beda6317@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for Pongo type of PLL clocks, used in Qualcomm SM8750 SoC.
Notable difference comparing to other PLLs is the need for calibration
for internally generated clock followed by wait_for_pll(). This is done
in configure call and at this time clocks are not yet registered, thus
wait_for_pll() cannot use clk_hw_get_name. Locking during this
calibration requires much more time, thus increase the timeout in
wait_for_pll().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-2-6f42beda6317@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
clk-for-6.14
Merge SM8750 display clock controller bindings through topic branch, to
make available to DeviceTree source branch as well.
|
|
Add bindings for the Qualcomm SM8750 Display Clock Controller (DISPCC).
Bindings are similar to existing SM8550 and SM8650 (same clock inputs),
but the clock hierarchy is quite different and these are not compatible
devices.
The binding header was copied from downstream sources, so I retained
original copyrights.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-1-6f42beda6317@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The TCSR clock controller found on SM8750 provides refclks
for PCIE, USB and UFS. Add clock driver for it.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-8-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for GCC for SM8750 platform.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-6-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add clock ops for Taycan PLL, add the register offsets for supporting
the PLL.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-4-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the RPMH clocks present in SM8750 SoC.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-3-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the match table for SC7280 to sort it in alphabetical order.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-2-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the documentation for clock rpmh driver on SM8750 SoCs.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-1-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
into clk-for-6.14
Merge the SM8750 GCC and TCSR clock bindings through topic branch, to
allow merging into DeviceTree source branch as well.
|
|
Add bindings documentation for the SM8750 Clock Controller.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-7-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for the global clock controller on Qualcomm
SM8750 platform.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-5-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fix cmd_rcgr offset for blsp1_uart6_apps_clk_src on mdm9607 platform.
Fixes: 48b7253264ea ("clk: qcom: Add MDM9607 GCC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220095048.248425-1-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
subordinate GDSCs
The Titan TOP GDSC is the parent GDSC for all other GDSCs in the CAMCC
block. None of the subordinate blocks will switch on without the parent
GDSC switched on.
Fixes: 76126a5129b5 ("clk: qcom: Add camcc clock driver for x1e80100")
Acked-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20241227-b4-linux-next-24-12-16-titan-top-gdsc-v1-1-c96ef62fc307@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Like all other non-ancient Qualcomm clock drivers, QCOM_GDSC is
required, as the GCC driver defines and instantiates a bunch of GDSCs.
Add the missing dependency.
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Closes: https://lore.kernel.org/linux-arm-msm/ab85f2ae-6c97-4fbb-a15b-31cc9e1f77fc@linaro.org/
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20241026-topic-8150gcc_kconfig-v1-1-3772013d8804@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit c45ae598fc16 ("clk: qcom: support for alpha mode configuration")
added support for configuring alpha mode, but it seems that the feature
was never working in practice.
The value of the alpha_{en,mode}_mask members of the configuration gets
added to the value parameter passed to the regmap_update_bits() function,
however the same values are not getting applied to the bitmask. As the
result, the respective bits in the USER_CTL register are never modifed
which leads to improper configuration of several PLLs.
The following table shows the PLL configurations where the 'alpha_en_mask'
member is set and which are passed as a parameter for the
clk_alpha_pll_configure() function. In the table the 'expected rate' column
shows the rate the PLL should run at with the given configuration, and
the 'real rate' column shows the rate the PLL runs at actually. The real
rates has been verified on hardwareOn IPQ* platforms, on other platforms,
those are computed values only.
file pll expected rate real rate
dispcc-qcm2290.c disp_cc_pll0 768.0 MHz 768.0 MHz
dispcc-sm6115.c disp_cc_pll0 768.0 MHz 768.0 MHz
gcc-ipq5018.c ubi32_pll 1000.0 MHz != 984.0 MHz
gcc-ipq6018.c nss_crypto_pll 1200.0 MHz 1200.0 MHz
gcc-ipq6018.c ubi32_pll 1497.6 MHz != 1488.0 MHz
gcc-ipq8074.c nss_crypto_pll 1200.0 MHz != 1190.4 MHz
gcc-qcm2290.c gpll11 532.0 MHz != 518.4 MHz
gcc-qcm2290.c gpll8 533.2 MHz != 518.4 MHz
gcc-qcs404.c gpll3 921.6 MHz 921.6 MHz
gcc-sm6115.c gpll11 600.0 MHz != 595.2 MHz
gcc-sm6115.c gpll8 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll0 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll1 740.0 MHz != 729.6 MHz
gpucc-sm6115.c gpu_cc_pll0 1200.0 MHz != 1190.4 MHz
gpucc-sm6115.c gpu_cc_pll1 640.0 MHz != 633.6 MHz
gpucc-sm6125.c gpu_pll0 1020.0 MHz != 1017.6 MHz
gpucc-sm6125.c gpu_pll1 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll8 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll5 825.0 MHz != 806.4 MHz
As it can be seen from the above, there are several PLLs which are
configured incorrectly.
Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask'
values to the bitmask in order to configure the alpha mode correctly.
Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed
in the table above. Since the 'alpha_mode_mask' is not used by any driver
currently, that part of the change causes no functional changes.
Cc: stable@vger.kernel.org
Fixes: c45ae598fc16 ("clk: qcom: support for alpha mode configuration")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since both the 'alpha' and 'alpha_hi' members of the configuration is
initialized (the latter is implicitly) with zero values, the output
rate of the PLL will be the same whether alpha mode is enabled or not.
Remove the initialization of the alpha* members to make it clear that
the alpha mode is not required to get the desired output rate.
Despite that enabling alpha mode is not needed for the initial
configuration, the set_rate() op might require that it is enabled
already. In this particular case however, the clk_alpha_pll_set_rate()
function will get reset the ALPHA_EN bit when the PLL's rate changes,
so dropping 'alpha_en_mask' is safe.
No functional changes intended, compile tested only.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-5-9bc6d712bd76@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since both the 'alpha' and 'alpha_hi' members of the configuration is
initialized (the latter is implicitly) with zero values, the output
rate of the PLL will be the same whether alpha mode is enabled or not.
Remove the initialization of the alpha* members to make it clear that
the alpha mode is not required to get the desired output rate.
Despite that enabling alpha mode is not needed for the initial
configuration, the set_rate() op might require that it is enabled
already. In this particular case however, the clk_alpha_pll_set_rate()
function will get reset the ALPHA_EN bit when the PLL's rate changes,
so dropping 'alpha_en_mask' is safe.
No functional changes intended, compile tested only.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-4-9bc6d712bd76@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since both the 'alpha' and 'alpha_hi' members of the configuration is
initialized with zero values, the output rate of the PLL will be the
same whether alpha mode is enabled or not.
Remove the initialization of the alpha* members to make it clear that
alpha mode is not required to get the desired output rate.
Despite that enabling alpha mode is not needed for the initial
configuration, the set_rate() op might require that it is enabled
already. In this particular case however, the clk_alpha_pll_set_rate()
function will get reset the ALPHA_EN bit when the PLL's rate changes,
so dropping 'alpha_en_mask' is safe.
While at it, also add a comment to indicate the frequency the PLL runs
at with the current configuration.
No functional changes, the PLL runs at 1.2 GHz both before and after
the change.
Tested on Xiaomi Mi Router AX1800 (IPQ6018, out-of-tree board).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-3-9bc6d712bd76@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since neither 'alpha' nor 'alpha_hi' is defined in the configuration,
those will be initialized with zero values implicitly. By using zero
alpha values, the output rate of the PLL will be the same whether
alpha mode is enabled or not.
Remove the superfluous initialization of the 'alpha_en_mask' member
to make it clear that enabling alpha mode is not required to get the
desired output rate.
Despite that enabling alpha mode is not needed for the initial
configuration, the set_rate() op might require that it is enabled
already. In this particular case however, the
clk_alpha_pll_stromer_plus_set_rate() function will get reset the
ALPHA_EN bit when the PLL's rate changes, so dropping 'alpha_en_mask'
is safe.
While at it, also add a comment to indicate the frequency the PLL
runs at with the current configuration.
No functional changes, the initial rate of the PLL is the same both
before and after the patch.
Tested on Xiaomi Router BE3600 2.5G (IPQ5312, out-of-tree board).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-2-9bc6d712bd76@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since neither 'alpha' nor 'alpha_hi' is defined in the configuration,
those will be initialized with zero values implicitly. By using zero
alpha values, the output rate of the PLL will be the same whether
alpha mode is enabled or not.
Remove the superfluous initialization of the 'alpha_en_mask' member
to make it clear that enabling alpha mode is not required to get the
desired output rate.
Despite that enabling alpha mode is not needed for the initial
configuration, the set_rate() op might require that it is enabled
already. In this particular case however, the
clk_alpha_pll_stromer_set_rate() function will get reset the
ALPHA_EN bit when the PLL's rate changes, so dropping 'alpha_en_mask'
is safe.
No functional changes, the initial rate of the PLL is the same both
before and after the patch.
Tested on TP-Link Archer AX55 v1 (IPQ5018).
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-1-9bc6d712bd76@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for the clock where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together.
Fixes: 837519775f1d ("clk: qcom: Add display clock controller driver for SM6350")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-2-64f3d04cb2eb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for two clocks where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together.
Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-1-64f3d04cb2eb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
aggr_state and unit fields are u32. The result of their
multiplication may not fit in this type.
Add explicit casting to prevent overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Link: https://lore.kernel.org/r/20241203084231.6001-1-abelova@astralinux.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the global clock controller support for QCS615 SoC.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241022-qcs615-clock-driver-v4-4-3d716ad0d987@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the RPMHCC clocks required for QCS615 SoC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241022-qcs615-clock-driver-v4-2-3d716ad0d987@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings and update documentation for clock rpmh driver on QCS615
SoCs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241022-qcs615-clock-driver-v4-1-3d716ad0d987@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-clk-qcom-v1-3-68bb9601c9dd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-clk-qcom-v1-2-68bb9601c9dd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-clk-qcom-v1-1-68bb9601c9dd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of PCIe controllers from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Cc: stable@vger.kernel.org # 6.8
Fixes: c58225b7e3d7 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8650
Link: https://lore.kernel.org/r/20241219170011.70140-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of PCIe controllers from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Cc: stable@vger.kernel.org # 6.2
Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550")
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8550
Link: https://lore.kernel.org/r/20241219170011.70140-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The 8-core X1s have a different GPU subsystem compared to their bigger
cousins, including the clocks part. Add the GPU clock controller driver
to drive these.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241221-topic-x1p4_clk-v1-3-dbaeccb74884@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
X1P42100 is based on X1E80100 and largely reuses the X1E80100's GCC
block, adding a couple wires here and there.
Add a compatible for the X1P4 with a fallback to X1E80100. There are
some additions in the smaller one, that will be added in the future.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241221-topic-x1p4_clk-v1-1-dbaeccb74884@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
