summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-29Input: i8042 - disable the driver on ARC platformsMischa Jonker
It causes crashes when enabled, and we don't have such a peripheral anyway on ARC platforms. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: xpad - add signature for Razer Onza Classic EditionMag
Signed-off-by: Nol "Mag" Archinova <magissia@magissia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-24Input: elantech - fix packet check for v3 and v4 hardwareMatteo Delfino
The signatures of v3 and v4 packets change depending on the value of a hardware flag called 'crc_enabled'. The packet type detection must change accordingly. This patch also restores a consistency check for v4 packets inadvertently removed by commit: 9eebed7de660c0b5ab129a9de4f89d20b60de68c Input: elantech - fix for newer hardware versions (v7) A note about the naming convention: v3 hardware is associated with IC body v5 while v4 hardware is associated with IC body v6 and v7. The above commit refers to IC body v7, not to v7 hardware. Tested on Samsung NP730U3E (fw = 0x675f05, ICv7, crc_enabled = 1) Tested-by: Giovanni Frigione <gio.frigione@gmail.com> Signed-off-by: Matteo Delfino <kendatsuba@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-24Input: wacom - add support for 0x300 and 0x301Ping Cheng
Tested-by: Arjuna Rao Chavala <arjunaraoc@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-12Merge branch 'next' into for-linusDmitry Torokhov
Bring in second round of updates for 3.11.
2013-07-06Input: nspire-keypad - replace magic offset with defineDaniel Tang
Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-06Input: elantech - fix for newer hardware versions (v7)Matteo Delfino
* Fix version recognition in elantech_set_properties The new hardware reports itself as v7 but the packets' structure is unaltered. * Fix packet type recognition in elantech_packet_check_v4 The bitmask used for v6 is too wide, only the last three bits of the third byte in a packet (packet[3] & 0x03) are actually used to distinguish between packet types. Starting from v7, additional information (to be interpreted) is stored in the remaining bits (packets[3] & 0x1c). In addition, the value stored in (packet[0] & 0x0c) is no longer a constant but contains additional information yet to be deciphered. This change should be backwards compatible with v6 hardware. Additional-author: Giovanni Frigione <gio.frigione@gmail.com> Signed-off-by: Matteo Delfino <kendatsuba@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-06Input: cyttsp4 - use 16bit address for I2C/SPI communicationFerruh Yigit
In TSG4, register map is 512bytes long and to access all of it, one bit from address byte is used (which bit to use differs for I2C and SPI); Since common code used for TSG3 and TSG4 for I2C, this parameter wrongly used as u8. TSG3 does not access beyond 255 bytes but TSG4 may. Tested-on:TMA3XX DVB && TMA4XX DVB Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-04Input: cyttsp4 - kfree xfer_buf on error path in probe()Ferruh Yigit
If probe() fails after cd->xfer_buf allocated, it will not freed. Added kfree(cd->xfer_buf) with and error label. Signed-off-by: Ferruh Yigit <fery@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-02Input: tps6507x-ts - select INPUT_POLLDEVDmitry Torokhov
Since the driver was converted to polled device infrastructure we need to make sure it is enabled. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-02Input: ads7846 - add device tree bindingsDaniel Mack
Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-02Input: ads7846 - make sure we do not change platform dataDmitry Torokhov
Let's declare platform data a const pointer so that we don't accitentally change it. Also fetch it with dev_get_platdata(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-02Input: bcm5974 - add support for the 2013 MacBook AirDmitry Torokhov
The June 2013 Macbook Air (13'') has a new trackpad protocol; four new values are inserted in the header, and the mode switch is no longer needed. This patch adds support for the new devices. Cc: stable@vger.kernel.org Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-02HID: apple: Add support for the 2013 Macbook AirDmitry Torokhov
This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8 (0x0291, 0x0292, 0x0293). The touchpad is handled in a separate bcm5974 patch, as usual. Cc: stable@vger.kernel.org Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-02Input: cyttsp4 - leak on error path in probe()Dan Carpenter
We leak "cd" if the cd->xfer_buf allocation fails. It was weird to "goto error_gpio_irq" so I changed the label name. (Label names should reflect the label location not the goto location otherwise you get an "all roads lead to Rome problem"). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-02Input: cyttsp4 - silence NULL dereference warningDan Carpenter
If "cd" were NULL then we would dereference it when we print the error message. Fortunately enough, it can't ever be NULL so we can remove those lines. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-02Input: cyttsp4 - silence shift wrap warningDan Carpenter
"*max" is a size_t (long) type but "1" is an int so static checkers complain that the shift could wrap. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-02Merge branch 'next' into for-linusDmitry Torokhov
Prepare first set of updates for 3.11 merge window.
2013-07-01Input: tps6507x-ts - convert to polled input device infrastructureDmitry Torokhov
There is no need to roll our own polling scheme when we already have one implemented by the core. Tested-by: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-01ARM: davinci: da850-evm: remove vref from touchscreen platform dataManish Badarkhe
The vref field was not used by the driver and was removed from the platform data structure. Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-30Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devicesFerruh Yigit
Cypress TrueTouch(tm) Standard Product controllers, Generation4 devices, SPI adapter module. This driver adds communication support with TTSP controller using SPI bus. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-30Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devicesFerruh Yigit
Cypress TrueTouch(tm) Standard Product controllers, Generation4 devices, I2C adapter module. This driver adds communication support with TTSP controller using I2C bus. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-30Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devicesFerruh Yigit
Cypress TrueTouch(tm) Standard Product controllers, Generetion4 devices, Core driver. Core driver is interface between host and TTSP controller and processes data sent by controller. Responsibilities of module are IRQ handling, reading system information registers and sending multi-touch protocol type B events. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-30Input: cyttsp - I2C driver split into two modulesFerruh Yigit
Existing I2C code is for TrueTouch Gen3 devices TrueTouch Gen4 device is using same protocol, will split driver into two pieces to use common code with both drivers. Read/Write functions parameter list modified, since shared code will be used by two separate drivers and these drivers are not sharing same structs, parameters updated to use common structures. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-30Input: add OLPC AP-SP driverDaniel Drake
The OLPC XO-1.75 and XO-4 laptops include a PS/2 touchpad and an AT keyboard, yet they do not have a hardware PS/2 controller. Instead, a firmware runs on a dedicated core ("Security Processor", part of the SoC) that acts as a PS/2 controller through bit-banging. Communication between the main cpu (Application Processor) and the Security Processor happens via a standard command mechanism implemented by the SoC. Add a driver for this interface to enable keyboard/mouse input on this platform. Original author: Saadia Baloch Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-27Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-27Merge branch 'for-next' of git://github.com/rydberg/linux into nextDmitry Torokhov
Pull in changes from Henrik: "a trivial MT documentation fix".
2013-06-25Input: tps6507x-ts - remove vref from platform dataDmitry Torokhov
Although defined in platform data, vref is not used anywhere. Also remove model, irq, and clear_penirq as they are not used either. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-25Input: tps6507x-ts - use bool for booleansDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-25Input: tps6507x-ts - remove bogus unreachable codeAlan Cox
tsc->polling is write only and the poll local is meaningless Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-25Input: samsung-keypad - let device core setup the default pin configurationThomas Abraham
With device core now able to setup the default pin configuration, the pin configuration code based on the deprecated Samsung specific gpio bindings is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-18Input: xpad - fix for "Mad Catz Street Fighter IV FightPad" controllersShawn Joseph
Added MAP_TRIGGERS_TO_BUTTONS for Mad Catz Street Fighter IV FightPad device. This controller model was already supported by the xpad driver, but none of the buttons work correctly without this change. Tested on kernel version 3.9.5. Signed-off-by: Shawn Joseph <jms.576@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-18Input: wacom - add a new stylus (0x100802) for Intuos5 and CintiqsPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-18Input: wacom_i2c - implement hovering capabilityTatsunosuke Tobita
Although BTN_TOOL_PEN and BTN_TOOL_RUBBER functioned properly, the driver didn't have hover functionality, so it's been added. Also, "WACOM_RETRY_CNT" was not used, so it was removed. Signed-off-by: Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-18Input: pxa27x-keypad - make platform data constDmitry Torokhov
It should not be changed by the driver, so let's make it const pointer. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-18Input: pxa27x-keypad - convert to using SIMPLE_DEV_PM_OPSDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-18Input: pxa27x-keypad - add device tree supportChao Xie
Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-18Input: pxa27x-keypad - use matrix_keymap for matrix keysChao Xie
pxa27x-keypad includes matrix keys. Make use of matrix_keymap for the matrix keys. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-13Input: MT - Specify that ABS_MT_SLOT must have a minimum of 0Peter Hutterer
This is effectively already in force through input_mt_init_slots, and uinput too ignores the actual minimum. Since slots are a kernel-genenerated axis only, non-zero minimums make little sense and are likely to cause errors. Better to treat a non-zero minimum as kernel bug if it ever happens. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2013-06-10Input: add missing dependencies on CONFIG_HAS_IOMEMBen Hutchings
Several drivers don't build on s390 with CONFIG_PCI disabled as they require MMIO functions. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org # 3.9 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-09Input: evdev - flush queues during EVIOCGKEY-like ioctlsDavid Herrmann
If userspace requests current KEY-state, they very likely assume that no such events are pending in the output queue of the evdev device. Otherwise, they will parse events which they already handled via EVIOCGKEY(). For XKB applications this can cause irreversible keyboard states if a modifier is locked multiple times because a CTRL-DOWN event is handled once via EVIOCGKEY() and once from the queue via read(), even though it should handle it only once. Therefore, lets do the only logical thing and flush the evdev queue atomically during this ioctl. We only flush events that are affected by the given ioctl. This only affects boolean events like KEY, SND, SW and LED. ABS, REL and others are not affected as duplicate events can be handled gracefully by user-space. Note: This actually breaks semantics of the evdev ABI. However, investigations showed that userspace already expects the new semantics and we end up fixing at least all XKB applications. All applications that are aware of this race-condition mirror the KEY state for each open-file and detect/drop duplicate events. Hence, they do not care whether duplicates are posted or not and work fine with this fix. Also note that we need proper locking to guarantee atomicity and avoid dead-locks. event_lock must be locked before queue_lock (see input-core). However, we can safely release event_lock while flushing the queue. This allows the input-core to proceed with pending events and only stop if it needs our queue_lock to post new events. This should guarantee that we don't block event-dispatching for too long while flushing a single event queue. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-08Linux 3.10-rc5v3.10-rc5Linus Torvalds
2013-06-08hpfs: fix warnings when the filesystem fills upMikulas Patocka
This patch fixes warnings due to missing lock on write error path. WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]() Hardware name: empty Pid: 26563, comm: dd Tainted: P O 3.9.4 #12 Call Trace: hpfs_truncate+0x75/0x80 [hpfs] hpfs_write_begin+0x84/0x90 [hpfs] _hpfs_bmap+0x10/0x10 [hpfs] generic_file_buffered_write+0x121/0x2c0 __generic_file_aio_write+0x1c7/0x3f0 generic_file_aio_write+0x7c/0x100 do_sync_write+0x98/0xd0 hpfs_file_write+0xd/0x50 [hpfs] vfs_write+0xa2/0x160 sys_write+0x51/0xa0 page_fault+0x22/0x30 system_call_fastpath+0x1a/0x1f Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-08Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: - Trivial: unused variable removal - Posix-timers: Add the clock ID to the new proc interface to make it useful. The interface is new and should be functional when we reach the final 3.10 release. - Cure a false positive warning in the tick code introduced by the overhaul in 3.10 - Fix for a persistent clock detection regression introduced in this cycle * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Correct run-time detection of persistent_clock. ntp: Remove unused variable flags in __hardpps posix-timers: Show clock ID in proc file tick: Cure broadcast false positive pending bit warning
2013-06-08Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull irqdomain bug fixes from Grant Likely: "This branch contains a set of straight forward bug fixes to the irqdomain code and to a couple of drivers that make use of it." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux: irqchip: Return -EPERM for reserved IRQs irqdomain: document the simple domain first_irq kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid. irqdomain: export irq_domain_add_simple
2013-06-08irqchip: Return -EPERM for reserved IRQsGrant Likely
The irqdomain core will report a log message for any attempted map call that fails unless the error code is -EPERM. This patch changes the Versatile irq controller drivers to use -EPERM because it is normal for a subset of the IRQ inputs to be marked as reserved on the various Versatile platforms. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08irqdomain: document the simple domain first_irqLinus Walleij
The first_irq needs to be zero to get a linear domain and that comes with special semantics. We want to simplify this going forward but some documentation never hurts. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.Chen Gang
Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq' which related with 'irq_data' has to initialize later, or it will cause issue. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08irqdomain: export irq_domain_add_simpleArnd Bergmann
All other irq_domain_add_* functions are exported already, and apparently this one got left out by mistake, which causes build errors for ARM allmodconfig kernels: ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined! ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes for arm-soc platforms. Nothing controversial here, a handful of fixes for regressions and/or serious problems across several of the platforms. Things are slowing down nicely on fix rates for 3.10" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: add debug_ll_io_init() call in exynos_init_io() ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins ARM: mxs: icoll: Fix interrupts gpio bank 0 ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: bcm2835: override the HW UART periphid ARM: mvebu: Fix bug in coherency fabric low level init function ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 ARM: ux500: Only configure wake-up reasons on ux500 based platforms ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 21:44:39 +0000