summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-20mlxsw: spectrum_router: Do not assume RTNL is taken during RIF teardownIdo Schimmel
IPv6 addresses are deleted in an atomic context, so the driver defers the potential teardown of the associated router interface (RIF) to a work item that takes RTNL. The RIF is only destroyed if the associated netdev does not have any IP addresses (both IPv4 and IPv6). The IPv4 device ('struct in_device') is currently fetched via __in_dev_get_rtnl() which assumes RTNL is taken. Since RTNL is going to be removed, convert it to use __in_dev_get_rcu() from an RCU read-side critical section. Note that the IPv6 device ('struct inet6_dev') is fetched via __in6_dev_get(), which does not require RTNL. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum_router: Do not assume RTNL is taken during nexthop initIdo Schimmel
RTNL is going to be removed from route insertion path, so use __in_dev_get_rcu() from an RCU read-side critical section instead of __in_dev_get_rtnl() which assumes RTNL is taken. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum_span: Only update mirroring agents if presentIdo Schimmel
In order not to needlessly schedule the work item that updates the mirroring agents, only schedule it if there are any mirroring agents present. This is done by adding an atomic counter that counts the active mirroring agents. It is incremented / decremented whenever a mirroring agent is created / destroyed. It is read before scheduling the work item and in the devlink-resource occupancy callback. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum: Convert callers to use new mirroring APIIdo Schimmel
Previous patch added a work item in the mirroring code that will take care of updating the active mirroring agents in response to different events. Change the mirroring agents update function - mlxsw_sp_span_respin() - to invoke this work item when called. Therefore there is no need for callers to schedule a work item themselves. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum_span: Prepare work item to update mirroring agentsIdo Schimmel
The driver updates its mirroring agents whenever it receives a notification about an event that can affect these. For example, the addition of a route might require the driver to change the egress port of an ERSPAN session. Currently, RTNL needs to be held when these agents are updates, so the driver either: 1. Calls directly into the mirroring code, in case RTNL is held 2. Schedules a work item that will take RTNL and call into the mirroring code Simplify this by having the mirroring code schedule the work item for the update instead of requiring callers to schedule a work item themselves. The conversion of the callers will be done in the next patch to make review easier. This will later allow us to remove RTNL from different parts of the driver. It will also allow us to only schedule the work item in case there are active mirroring agents, which is information private to the mirroring code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum_span: Use struct_size() to simplify allocationIdo Schimmel
Allocate the main mirroring struct and the individual structs for the different mirroring agents in a single allocation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum_span: Do no expose mirroring agents to entire driverIdo Schimmel
The struct holding the different mirroring agents is currently allocated as part of the main driver struct. This is unlike other driver modules. Allocate the memory required to store the different mirroring agents as part of the initialization of the mirroring module. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum: Protect counter pool with a lockIdo Schimmel
The counter pool is a shared resource. It is used by both the ACL code to allocate counters for actions and by the routing code to allocate counters for adjacency entries (for example). Currently, all allocations are protected by RTNL, but this is going to change with the removal of RTNL from the routing code. Therefore, protect counter allocations with a spin lock. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum_kvdl: Protect allocations with a lockIdo Schimmel
The KVDL is used to store objects allocated throughout various places in the driver. For example, both nexthops (adjacency entries) and ACL actions are stored in the KVDL. Currently, all allocations are protected by RTNL, but this is going to change with the removal of RTNL from the routing code. Therefore, protect KVDL allocations with a lock. A mutex is used since the free operation can block in Spectrum-2. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: remove unused macro from fib_trie.cLi RongQing
TNODE_KMALLOC_MAX and VERSION are not used, so remove them Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: neigh: remove unused NEIGH_SYSCTL_MS_JIFFIES_ENTRYLi RongQing
this macro is never used, so remove it Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20openvswitch: Distribute switch variables for initializationKees Cook
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/openvswitch/flow_netlink.c: In function ‘validate_set’: net/openvswitch/flow_netlink.c:2711:29: warning: statement will never be executed [-Wswitch-unreachable] 2711 | const struct ovs_key_ipv4 *ipv4_key; | ^~~~~~~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: ip6_gre: Distribute switch variables for initializationKees Cook
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/ipv6/ip6_gre.c: In function ‘ip6gre_err’: net/ipv6/ip6_gre.c:440:32: warning: statement will never be executed [-Wswitch-unreachable] 440 | struct ipv6_tlv_tnl_enc_lim *tel; | ^~~ net/ipv6/ip6_tunnel.c: In function ‘ip6_tnl_err’: net/ipv6/ip6_tunnel.c:520:32: warning: statement will never be executed [-Wswitch-unreachable] 520 | struct ipv6_tlv_tnl_enc_lim *tel; | ^~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: core: Distribute switch variables for initializationKees Cook
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/core/skbuff.c: In function ‘skb_checksum_setup_ip’: net/core/skbuff.c:4809:7: warning: statement will never be executed [-Wswitch-unreachable] 4809 | int err; | ^~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20Merge branch 'linux-5.6' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Nothing major here, another TU1xx modesetting fix, and hooking up ACR/GR support on TU11x now that NVIDIA have made the firmware available. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv64yBq4KHJ8D-5HQ5eeotApJSMiD+V2ut4f3BonUggf0Q@mail.gmail.com
2020-02-19Merge tag 'linux-kselftest-5.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Fixes to build failures and other test bugs" * tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: openat2: fix build error on newer glibc selftests: use LDLIBS for libraries instead of LDFLAGS selftests: fix too long argument selftests: allow detection of build failures Kernel selftests: tpm2: check for tpm support selftests/ftrace: Have pid filter test use instance flag selftests: fix spelling mistaked "chaigned" -> "chained"
2020-02-20Merge tag 'drm-msm-fixes-2020-02-16' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes + fix UBWC on GPU and display side for sc7180 + fix DSI suspend/resume issue encountered on sc7180 + fix some breakage on so called "linux-android" devices (fallout from sc7180/a618 support, not seen earlier due to bootloader/firmware differences) + couple other misc fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGshz5K3tJd=NsBSHq6HGT-ZRa67qt+iN=U2ZFO2oD8kuw@mail.gmail.com
2020-02-19igc: Add commentSasha Neftin
Separate interrupt and flag definitions. Made the code clear. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Add WOL supportSasha Neftin
This patch adds a define and WOL support for an i225 parts. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Add pcie error handler supportSasha Neftin
Add pcie error detection, slot reset and resume capability Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Complete to commit Add basic skeleton for PTPSasha Neftin
commit 5f2958052c58 ("igc: Add basic skeleton for PTP") added basic support for PTP, what's missing is support for suspending. Legacy power management has been added. Now we can add the suspend method to the igc_shutdown. By cleaning the runtime storage for timestamp this avoids a possible invalid memory access when the system comes back from suspend state. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19e1000e: Add support for Tiger Lake deviceVitaly Lifshits
Added support for a device id that is a part of the Intel Tiger Lake platform. Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Fix the typo in commentSasha Neftin
Fix the typo and comment to correspond to the i225 device Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19e1000e: Add support for Alder LakeSasha Neftin
Add devices ID's for the next LOM generations that will be available on the next Intel Client platform (Alder Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-20Merge tag 'amd-drm-fixes-5.6-2020-02-19' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-02-19: amdgpu: - HDCP fixes - xclk fix for raven - GFXOFF fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200219173954.3847-1-alexander.deucher@amd.com
2020-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2020-02-19 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 10 day(s) which contain a total of 10 files changed, 93 insertions(+), 31 deletions(-). The main changes are: 1) batched bpf hashtab fixes from Brian and Yonghong. 2) various selftests and libbpf fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19tc-testing: updated tdc tests for basic filterRoman Mashak
Added tests for 'u32' extended match rules for u8 alignment. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-02-19 This series contains fixes to the ice driver. Brett fixes an issue where if a user sets an odd [tx|rx]-usecs value through ethtool, the request is denied because the hardware is set to have an ITR with 2us granularity. Also fix an issue where the VF has not been completely removed/reset after being unbound from the host driver, so resolve this by waiting for the VF remove/reset process to happen before checking if the VF is disabled. Michal fixes an issue, where when the user changes flow control via ethtool, the OS is told the link is going down when that may not be the case. Before the fix, the only way to get out of this state was to take the interface down and up again. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19Merge branch 'net-phy-Better-support-for-BCM54810'David S. Miller
Florian Fainelli says: ==================== net: phy: Better support for BCM54810 This patch series updates the broadcom PHY driver to better support the BCM54810 and allow it to make use of the exiting bcm54xx_adjust_rxrefclk() as well as fix suspend/resume for it. Changes in v2: - added Reviewed-by tags from Andrew for patches #1 and #3 - expanded commit message in #2 to explain the change ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: phy: broadcom: Wire suspend/resume for BCM54810Florian Fainelli
The BCM54810 PHY can use the standard BMCR Power down suspend, but needs a custom resume routine which first clear the Power down bit, and then re-initializes the PHY. While in low-power mode, the PHY only accepts writes to the BMCR register. The datasheet clearly says it: Reads or writes to any MII register other than MII Control register (address 00h) while the device is in the standby power-down mode may cause unpredictable results. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: phy: broadcom: Have bcm54xx_adjust_rxrefclk() check for flagsFlorian Fainelli
bcm54xx_adjust_rxrefclk() already checks for PHY_BRCM_AUTO_PWRDWN_ENABLE and PHY_BRCM_DIS_TXCRXC_NOENRGY in order to set the appropriate bit. The situation is a bit more complicated with the flag PHY_BRCM_RX_REFCLK_UNUSED but essentially amounts to the same situation. The default setting for the 125MHz clock is to be on for all PHYs and we still treat BCM50610 and BCM50610M specifically with the polarity of the bit reversed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()Florian Fainelli
The function bcm54xx_adjust_rxrefclk() works correctly on the BCM54810 PHY, allow this device ID to proceed through. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19udp: rehash on disconnectWillem de Bruijn
As of the below commit, udp sockets bound to a specific address can coexist with one bound to the any addr for the same port. The commit also phased out the use of socket hashing based only on port (hslot), in favor of always hashing on {addr, port} (hslot2). The change broke the following behavior with disconnect (AF_UNSPEC): server binds to 0.0.0.0:1337 server connects to 127.0.0.1:80 server disconnects client connects to 127.0.0.1:1337 client sends "hello" server reads "hello" // times out, packet did not find sk On connect the server acquires a specific source addr suitable for routing to its destination. On disconnect it reverts to the any addr. The connect call triggers a rehash to a different hslot2. On disconnect, add the same to return to the original hslot2. Skip this step if the socket is going to be unhashed completely. Fixes: 4cdeeee9252a ("net: udp: prefer listeners bound to an address") Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net/tls: Fix to avoid gettig invalid tls recordRohit Maheshwari
Current code doesn't check if tcp sequence number is starting from (/after) 1st record's start sequnce number. It only checks if seq number is before 1st record's end sequnce number. This problem will always be a possibility in re-transmit case. If a record which belongs to a requested seq number is already deleted, tls_get_record will start looking into list and as per the check it will look if seq number is before the end seq of 1st record, which will always be true and will return 1st record always, it should in fact return NULL. As part of the fix, start looking each record only if the sequence number lies in the list else return NULL. There is one more check added, driver look for the start marker record to handle tcp packets which are before the tls offload start sequence number, hence return 1st record if the record is tls start marker and seq number is before the 1st record's starting sequence number. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19sfc: remove unused variable 'efx_default_channel_type'YueHaibing
drivers/net/ethernet/sfc/efx.c:116:38: warning: efx_default_channel_type defined but not used [-Wunused-const-variable=] commit 83975485077d ("sfc: move channel alloc/removal code") left behind this, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 83975485077d ("sfc: move channel alloc/removal code") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: misc updates for -net-next This series includes some misc updates for the HNS3 ethernet driver. [patch 1] modifies an unsuitable print when setting dulex mode. [patch 2] adds some debugfs info for TC and DWRR. [patch 3] adds some debugfs info for loopback. [patch 4] adds a missing help info for QS shaper in debugfs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: hns3: add missing help info for QS shaper in debugfsYonglong Liu
HNS3 driver can dump QS shaper configs via debugfs, but missing help info in debugfs for this operation. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: hns3: add support for dump MAC ID and loopback status in debugfsYufeng Mo
The MAC ID and loopback status information are obtained from the hardware, which will be helpful for debugging. This patch adds support for these two items in debugfs. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: hns3: add enabled TC numbers and DWRR weight info in debugfsYonglong Liu
The actual enabled TC numbers and the DWRR weight of each TC may be helpful for debugging, so adds them into debugfs. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: hns3: modify an unsuitable print when setting unknown duplex to fibreGuangbin Huang
Currently, if device is in link down status and user uses 'ethtool -s' command to set speed but not specify duplex mode, the duplex mode passed from ethtool to driver is unknown value(255), and the fibre port will identify this value as half duplex mode and print "only copper port supports half duplex!". This message is confusing. So for fibre port, only the setting duplex is half, prints error and returns. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19mlxsw: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19phy: avoid unnecessary link-up delay in polling modePetr Oros
commit 93c0970493c71f ("net: phy: consider latched link-down status in polling mode") removed double-read of latched link-state register for polling mode from genphy_update_link(). This added extra ~1s delay into sequence link down->up. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up. In phy_state_machine is checked link state but it is latched "link is down". The state machine is scheduled after one second and there is detected "link is up". This extra delay can be avoided when we keep link-state register double read in case when link was down previously. With this solution we don't miss a link-down event in polling mode and link-up is faster. Details about this quirky behavior on Realtek phy: Without patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), here i read link-down (BMSR_LSTATUS==0), T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), up-to-date link-up is read (BMSR_LSTATUS==1), phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING With patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0, second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1, phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20selftests/bpf: Fix build of sockmap_ktls.cAlexei Starovoitov
The selftests fails to build with: tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c: In function ‘test_sockmap_ktls_disconnect_after_delete’: tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c:72:37: error: ‘TCP_ULP’ undeclared (first use in this function) 72 | err = setsockopt(cli, IPPROTO_TCP, TCP_ULP, "tls", strlen("tls")); | ^~~~~~~ Similar to commit that fixes build of sockmap_basic.c on systems with old /usr/include fix the build of sockmap_ktls.c Fixes: d1ba1204f2ee ("selftests/bpf: Test unhashing kTLS socket after removing from map") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200219205514.3353788-1-ast@kernel.org
2020-02-19bpf: Fix a potential deadlock with bpf_map_do_batchYonghong Song
Commit 057996380a42 ("bpf: Add batch ops to all htab bpf map") added lookup_and_delete batch operation for hash table. The current implementation has bpf_lru_push_free() inside the bucket lock, which may cause a deadlock. syzbot reports: -> #2 (&htab->buckets[i].lock#2){....}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:159 htab_lru_map_delete_node+0xce/0x2f0 kernel/bpf/hashtab.c:593 __bpf_lru_list_shrink_inactive kernel/bpf/bpf_lru_list.c:220 [inline] __bpf_lru_list_shrink+0xf9/0x470 kernel/bpf/bpf_lru_list.c:266 bpf_lru_list_pop_free_to_local kernel/bpf/bpf_lru_list.c:340 [inline] bpf_common_lru_pop_free kernel/bpf/bpf_lru_list.c:447 [inline] bpf_lru_pop_free+0x87c/0x1670 kernel/bpf/bpf_lru_list.c:499 prealloc_lru_pop+0x2c/0xa0 kernel/bpf/hashtab.c:132 __htab_lru_percpu_map_update_elem+0x67e/0xa90 kernel/bpf/hashtab.c:1069 bpf_percpu_hash_update+0x16e/0x210 kernel/bpf/hashtab.c:1585 bpf_map_update_value.isra.0+0x2d7/0x8e0 kernel/bpf/syscall.c:181 generic_map_update_batch+0x41f/0x610 kernel/bpf/syscall.c:1319 bpf_map_do_batch+0x3f5/0x510 kernel/bpf/syscall.c:3348 __do_sys_bpf+0x9b7/0x41e0 kernel/bpf/syscall.c:3460 __se_sys_bpf kernel/bpf/syscall.c:3355 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:3355 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&loc_l->lock){....}: check_prev_add kernel/locking/lockdep.c:2475 [inline] check_prevs_add kernel/locking/lockdep.c:2580 [inline] validate_chain kernel/locking/lockdep.c:2970 [inline] __lock_acquire+0x2596/0x4a00 kernel/locking/lockdep.c:3954 lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4484 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:159 bpf_common_lru_push_free kernel/bpf/bpf_lru_list.c:516 [inline] bpf_lru_push_free+0x250/0x5b0 kernel/bpf/bpf_lru_list.c:555 __htab_map_lookup_and_delete_batch+0x8d4/0x1540 kernel/bpf/hashtab.c:1374 htab_lru_map_lookup_and_delete_batch+0x34/0x40 kernel/bpf/hashtab.c:1491 bpf_map_do_batch+0x3f5/0x510 kernel/bpf/syscall.c:3348 __do_sys_bpf+0x1f7d/0x41e0 kernel/bpf/syscall.c:3456 __se_sys_bpf kernel/bpf/syscall.c:3355 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:3355 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Possible unsafe locking scenario: CPU0 CPU2 ---- ---- lock(&htab->buckets[i].lock#2); lock(&l->lock); lock(&htab->buckets[i].lock#2); lock(&loc_l->lock); *** DEADLOCK *** To fix the issue, for htab_lru_map_lookup_and_delete_batch() in CPU0, let us do bpf_lru_push_free() out of the htab bucket lock. This can avoid the above deadlock scenario. Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map") Reported-by: syzbot+a38ff3d9356388f2fb83@syzkaller.appspotmail.com Reported-by: syzbot+122b5421d14e68f29cd1@syzkaller.appspotmail.com Suggested-by: Hillf Danton <hdanton@sina.com> Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Brian Vazquez <brianvv@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200219234757.3544014-1-yhs@fb.com
2020-02-19bpf: Do not grab the bucket spinlock by default on htab batch opsBrian Vazquez
Grabbing the spinlock for every bucket even if it's empty, was causing significant perfomance cost when traversing htab maps that have only a few entries. This patch addresses the issue by checking first the bucket_cnt, if the bucket has some entries then we go and grab the spinlock and proceed with the batching. Tested with a htab of size 50K and different value of populated entries. Before: Benchmark Time(ns) CPU(ns) --------------------------------------------- BM_DumpHashMap/1 2759655 2752033 BM_DumpHashMap/10 2933722 2930825 BM_DumpHashMap/200 3171680 3170265 BM_DumpHashMap/500 3639607 3635511 BM_DumpHashMap/1000 4369008 4364981 BM_DumpHashMap/5k 11171919 11134028 BM_DumpHashMap/20k 69150080 69033496 BM_DumpHashMap/39k 190501036 190226162 After: Benchmark Time(ns) CPU(ns) --------------------------------------------- BM_DumpHashMap/1 202707 200109 BM_DumpHashMap/10 213441 210569 BM_DumpHashMap/200 478641 472350 BM_DumpHashMap/500 980061 967102 BM_DumpHashMap/1000 1863835 1839575 BM_DumpHashMap/5k 8961836 8902540 BM_DumpHashMap/20k 69761497 69322756 BM_DumpHashMap/39k 187437830 186551111 Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map") Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200218172552.215077-1-brianvv@google.com
2020-02-19igc: Add dump optionsSasha Neftin
Placeholder for debugging functionality. In this patch, we add some registers and rings summary dumps. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Complete to commit Add legacy power management supportSasha Neftin
commit 9513d2a5dc7f ("igc: Add legacy power management support") Add power management resume and schedule suspend requests. Add power management get and put synchronization. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: make non-global functions staticChen Zhou
Fix sparse warning: drivers/net/ethernet/intel/igc/igc_ptp.c:512:6: warning: symbol 'igc_ptp_tx_work' was not declared. Should it be static? drivers/net/ethernet/intel/igc/igc_ptp.c:644:6: warning: symbol 'igc_ptp_suspend' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19net: intel: e1000e: fix possible sleep-in-atomic-context bugs in ↵Jia-Ju Bai
e1000e_get_hw_semaphore() The driver may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is: drivers/net/ethernet/intel/e1000e/mac.c, 1366: usleep_range in e1000e_get_hw_semaphore drivers/net/ethernet/intel/e1000e/80003es2lan.c, 322: e1000e_get_hw_semaphore in e1000_release_swfw_sync_80003es2lan drivers/net/ethernet/intel/e1000e/80003es2lan.c, 197: e1000_release_swfw_sync_80003es2lan in e1000_release_phy_80003es2lan drivers/net/ethernet/intel/e1000e/netdev.c, 4883: (FUNC_PTR) e1000_release_phy_80003es2lan in e1000e_update_phy_stats drivers/net/ethernet/intel/e1000e/netdev.c, 4917: e1000e_update_phy_stats in e1000e_update_stats drivers/net/ethernet/intel/e1000e/netdev.c, 5945: e1000e_update_stats in e1000e_get_stats64 drivers/net/ethernet/intel/e1000e/netdev.c, 5944: spin_lock in e1000e_get_stats64 drivers/net/ethernet/intel/e1000e/mac.c, 1384: usleep_range in e1000e_get_hw_semaphore drivers/net/ethernet/intel/e1000e/80003es2lan.c, 322: e1000e_get_hw_semaphore in e1000_release_swfw_sync_80003es2lan drivers/net/ethernet/intel/e1000e/80003es2lan.c, 197: e1000_release_swfw_sync_80003es2lan in e1000_release_phy_80003es2lan drivers/net/ethernet/intel/e1000e/netdev.c, 4883: (FUNC_PTR) e1000_release_phy_80003es2lan in e1000e_update_phy_stats drivers/net/ethernet/intel/e1000e/netdev.c, 4917: e1000e_update_phy_stats in e1000e_update_stats drivers/net/ethernet/intel/e1000e/netdev.c, 5945: e1000e_update_stats in e1000e_get_stats64 drivers/net/ethernet/intel/e1000e/netdev.c, 5944: spin_lock in e1000e_get_stats64 (FUNC_PTR) means a function pointer is called. To fix these bugs, usleep_range() is replaced with udelay(). These bugs are found by a static analysis tool STCheck written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19selftests/bpf: Change llvm flag -mcpu=probe to -mcpu=v3Yonghong Song
The latest llvm supports cpu version v3, which is cpu version v1 plus some additional 64bit jmp insns and 32bit jmp insn support. In selftests/bpf Makefile, the llvm flag -mcpu=probe did runtime probe into the host system. Depending on compilation environments, it is possible that runtime probe may fail, e.g., due to memlock issue. This will cause generated code with cpu version v1. This may cause confusion as the same compiler and the same C code generates different byte codes in different environment. Let us change the llvm flag -mcpu=probe to -mcpu=v3 so the generated code will be the same regardless of the compilation environment. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200219004236.2291125-1-yhs@fb.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 12:18:34 +0000