| Age | Commit message (Collapse) | Author |
|---|
|
Use correct bittiming limits for the KCAN CAN controller.
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20201115163027.16851-2-jimmyassarsson@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use correct bittiming limits for the KCAN CAN controller.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20201115163027.16851-1-jimmyassarsson@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Commit e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting
dma_pfn_offset") introduced a regression in our code since the second
backed to probe will now get -EINVAL back from dma_direct_set_offset and
will prevent the entire DRM device from probing.
Ignore -EINVAL as a temporary measure to get it back working, before
removing that call entirely.
Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Checking for ifdef CONFIG_x fails if CONFIG_x=m.
Use IS_ENABLED instead, which is true for both built-ins and modules.
Otherwise, a
> ip -4 route add 1.2.3.4/32 via inet6 fe80::2 dev eth1
fails with the message "Error: IPv6 support not enabled in kernel." if
CONFIG_IPV6 is `m`.
In the spirit of b8127113d01e53adba15b41aefd37b90ed83d631.
Fixes: d15662682db2 ("ipv4: Allow ipv6 gateway with ipv4 routes")
Cc: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Florian Klink <flokli@flokli.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201115224509.2020651-1-flokli@flokli.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The code refactoring of ILT configuration was not complete, the old
unused variables were used for the SRC block. That could lead to the memory
corruption by HW when rx filters are configured.
This patch completes that refactoring.
Fixes: 8a52bbab39c9 (qed: Debug feature: ilt and mdump)
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Link: https://lore.kernel.org/r/20201116132944.2055-1-dbogdanov@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nlmsg_cancel() needs to be called in the error path of
inet_req_diag_fill to cancel the message.
Fixes: d545caca827b ("net: inet: diag: expose the socket mark to privileged processes.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201116082018.16496-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing define of ALIGN_DOWN to make the test build and run. In
addition, __sg_alloc_table_from_pages now support unaligned maximum
segment, so adapt the test result accordingly.
Fixes: 07da1223ec93 ("lib/scatterlist: Add support in dynamic allocation of SG table from pages")
Link: https://lore.kernel.org/r/20201115120623.139113-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When skb has a frag_list its possible for skb_to_sgvec() to fail. This
happens when the scatterlist has fewer elements to store pages than would
be needed for the initial skb plus any of its frags.
This case appears rare, but is possible when running an RX parser/verdict
programs exposed to the internet. Currently, when this happens we throw
an error, break the pipe, and kfree the msg. This effectively breaks the
application or forces it to do a retry.
Lets catch this case and handle it by doing an skb_linearize() on any
skb we receive with frags. At this point skb_to_sgvec should not fail
because the failing conditions would require frags to be in place.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556576837.73229.14800682790808797635.stgit@john-XPS-13-9370
|
|
If the skb_verdict_prog redirects an skb knowingly to itself, fix your
BPF program this is not optimal and an abuse of the API please use
SK_PASS. That said there may be cases, such as socket load balancing,
where picking the socket is hashed based or otherwise picks the same
socket it was received on in some rare cases. If this happens we don't
want to confuse userspace giving them an EAGAIN error if we can avoid
it.
To avoid double accounting in these cases. At the moment even if the
skb has already been charged against the sockets rcvbuf and forward
alloc we check it again and do set_owner_r() causing it to be orphaned
and recharged. For one this is useless work, but more importantly we
can have a case where the skb could be put on the ingress queue, but
because we are under memory pressure we return EAGAIN. The trouble
here is the skb has already been accounted for so any rcvbuf checks
include the memory associated with the packet already. This rolls
up and can result in unnecessary EAGAIN errors in userspace read()
calls.
Fix by doing an unlikely check and skipping checks if skb->sk == sk.
Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556574804.73229.11328201020039674147.stgit@john-XPS-13-9370
|
|
If a socket redirects to itself and it is under memory pressure it is
possible to get a socket stuck so that recv() returns EAGAIN and the
socket can not advance for some time. This happens because when
redirecting a skb to the same socket we received the skb on we first
check if it is OK to enqueue the skb on the receiving socket by checking
memory limits. But, if the skb is itself the object holding the memory
needed to enqueue the skb we will keep retrying from kernel side
and always fail with EAGAIN. Then userspace will get a recv() EAGAIN
error if there are no skbs in the psock ingress queue. This will continue
until either some skbs get kfree'd causing the memory pressure to
reduce far enough that we can enqueue the pending packet or the
socket is destroyed. In some cases its possible to get a socket
stuck for a noticeable amount of time if the socket is only receiving
skbs from sk_skb verdict programs. To reproduce I make the socket
memory limits ridiculously low so sockets are always under memory
pressure. More often though if under memory pressure it looks like
a spurious EAGAIN error on user space side causing userspace to retry
and typically enough has moved on the memory side that it works.
To fix skip memory checks and skb_orphan if receiving on the same
sock as already assigned.
For SK_PASS cases this is easy, its always the same socket so we
can just omit the orphan/set_owner pair.
For backlog cases we need to check skb->sk and decide if the orphan
and set_owner pair are needed.
Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556572660.73229.12566203819812939627.stgit@john-XPS-13-9370
|
|
We use skb->size with sk_rmem_scheduled() which is not correct. Instead
use truesize to align with socket and tcp stack usage of sk_rmem_schedule.
Suggested-by: Daniel Borkman <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556570616.73229.17003722112077507863.stgit@john-XPS-13-9370
|
|
Fix sockmap sk_skb programs so that they observe sk_rcvbuf limits. This
allows users to tune SO_RCVBUF and sockmap will honor them.
We can refactor the if(charge) case out in later patches. But, keep this
fix to the point.
Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556568657.73229.8404601585878439060.stgit@john-XPS-13-9370
|
|
If copy_page_to_iter() fails or even partially completes, but with fewer
bytes copied than expected we currently reset sg.start and return EFAULT.
This proves problematic if we already copied data into the user buffer
before we return an error. Because we leave the copied data in the user
buffer and fail to unwind the scatterlist so kernel side believes data
has been copied and user side believes data has _not_ been received.
Expected behavior should be to return number of bytes copied and then
on the next read we need to return the error assuming its still there. This
can happen if we have a copy length spanning multiple scatterlist elements
and one or more complete before the error is hit.
The error is rare enough though that my normal testing with server side
programs, such as nginx, httpd, envoy, etc., I have never seen this. The
only reliable way to reproduce that I've found is to stream movies over
my browser for a day or so and wait for it to hang. Not very scientific,
but with a few extra WARN_ON()s in the code the bug was obvious.
When we review the errors from copy_page_to_iter() it seems we are hitting
a page fault from copy_page_to_iter_iovec() where the code checks
fault_in_pages_writeable(buf, copy) where buf is the user buffer. It
also seems typical server applications don't hit this case.
The other way to try and reproduce this is run the sockmap selftest tool
test_sockmap with data verification enabled, but it doesn't reproduce the
fault. Perhaps we can trigger this case artificially somehow from the
test tools. I haven't sorted out a way to do that yet though.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556566659.73229.15694973114605301063.stgit@john-XPS-13-9370
|
|
In async_resync mode, we log the TCP seq of records until the async request
is completed. Later, in case one of the logged seqs matches the resync
request, we return it, together with its record serial number. Before this
fix, we mistakenly returned the serial number of the current record
instead.
Fixes: ed9b7646b06a ("net/tls: Add asynchronous resync")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20201115131448.2702-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Zorro reports that an xfstest test case is failing, and it turns out that
for the reissue path we can potentially issue a double completion on the
request for the failure path. There's an issue around the retry as well,
but for now, at least just make sure that we handle the error path
correctly.
Cc: stable@vger.kernel.org
Fixes: b63534c41e20 ("io_uring: re-issue block requests that failed because of resources")
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.
Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters")
Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support")
Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots")
Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201115103041.30701-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the use of security_capable(current_cred(), ...) with
ns_capable_noaudit() which set PF_SUPERPRIV.
Since commit 98f368e9e263 ("kernel: Add noaudit variant of
ns_capable()"), a new ns_capable_noaudit() helper is available. Let's
use it!
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Will Drewry <wad@chromium.org>
Cc: stable@vger.kernel.org
Fixes: e2cfabdfd075 ("seccomp: add system call filtering using BPF")
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201030123849.770769-3-mic@digikod.net
|
|
Commit 69f594a38967 ("ptrace: do not audit capability check when outputing
/proc/pid/stat") replaced the use of ns_capable() with
has_ns_capability{,_noaudit}() which doesn't set PF_SUPERPRIV.
Commit 6b3ad6649a4c ("ptrace: reintroduce usage of subjective credentials in
ptrace_has_cap()") replaced has_ns_capability{,_noaudit}() with
security_capable(), which doesn't set PF_SUPERPRIV neither.
Since commit 98f368e9e263 ("kernel: Add noaudit variant of ns_capable()"), a
new ns_capable_noaudit() helper is available. Let's use it!
As a result, the signature of ptrace_has_cap() is restored to its original one.
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: stable@vger.kernel.org
Fixes: 6b3ad6649a4c ("ptrace: reintroduce usage of subjective credentials in ptrace_has_cap()")
Fixes: 69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat")
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201030123849.770769-2-mic@digikod.net
|
|
Due to a hardware issue, an access to MDIO registers
that is concurrent with other ENETC register accesses
may lead to the MDIO access being dropped or corrupted.
The workaround introduces locking for all register accesses
to the ENETC register space. To reduce performance impact,
a readers-writers locking scheme has been implemented.
The writer in this case is the MDIO access code (irrelevant
whether that MDIO access is a register read or write), and
the reader is any access code to non-MDIO ENETC registers.
Also, the datapath functions acquire the read lock fewer times
and use _hot accessors. All the rest of the code uses the _wa
accessors which lock every register access.
The commit introducing MDIO support is -
commit ebfcb23d62ab ("enetc: Add ENETC PF level external MDIO support")
but due to subsequent refactoring this patch is applicable on
top of a later commit.
Fixes: 6517798dd343 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201112182608.26177-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A fix for use-after-free in the Sun keyboard driver, a fix to firmware
updates on newer ICs in the Elan touchpad diver, and a couple misc
driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - fix firmware update on newer ICs
Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFER
Input: sunkbd - avoid use-after-free in teardown paths
Input: i8042 - allow insmod to succeed on devices without an i8042 controller
Input: adxl34x - clean up a data type in adxl34x_probe()
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: aedd133d17bc ("net/mlx5e: Support CT offload for tc nic flows")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Avoid calling mlx5_esw_modify_vport_rate() if qos is not enabled and
avoid unnecessary syndrome messages from firmware.
Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently when QoS is enabled for VF and any min_rate is configured,
the driver sets bw_share value to at least 1 and doesn’t allow to set
it to 0 to make minimal rate unlimited. It means there is always a
minimal rate configured for every VF, even if user tries to remove it.
In order to make QoS disable possible, check whether all vports have
configured min_rate = 0. If this is true, set their bw_share to 0 to
disable min_rate limitations.
Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate")
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, if user disables VFs with some min and max rates configured,
they are cleared. But QoS data is not cleared and restored upon next VF
enable placing limits on minimal rate for given VF, when user expects
none.
To match cleared vport->info struct with QoS-related min and max rates
upon VF disable, clear vport->qos struct too.
Fixes: 556b9d16d3f5 ("net/mlx5: Clear VF's configuration on disabling SRIOV")
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Handle destruction of rules with port destination type to enable
full destruction of flow.
Without this handling of TX rules the deletion of these rules fails.
Dmesg of flow destruction failure:
[ 203.714146] mlx5_core 0000:00:0b.0: mlx5_cmd_check:753:(pid 342): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x144b7a)
[ 210.547387] ------------[ cut here ]------------
[ 210.548663] refcount_t: decrement hit 0; leaking memory.
[ 210.550651] WARNING: CPU: 4 PID: 342 at lib/refcount.c:31 refcount_warn_saturate+0x5c/0x110
[ 210.550654] Modules linked in: mlx5_ib mlx5_core ib_ipoib rdma_ucm rdma_cm iw_cm ib_cm ib_umad ib_uverbs ib_core
[ 210.550675] CPU: 4 PID: 342 Comm: test Not tainted 5.8.0-rc2+ #116
[ 210.550678] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 210.550680] RIP: 0010:refcount_warn_saturate+0x5c/0x110
[ 210.550685] Code: c6 d1 1b 01 00 0f 84 ad 00 00 00 5b 5d c3 80 3d b5 d1 1b 01 00 75 f4 48 c7 c7 20 d1 15 82 c6 05 a5 d1 1b 01 01 e8 a7 eb af ff <0f> 0b eb dd 80 3d 99 d1 1b 01 00 75 d4 48 c7 c7 c0 cf 15 82 c6 05
[ 210.550687] RSP: 0018:ffff8881642e77e8 EFLAGS: 00010282
[ 210.550691] RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000
[ 210.550694] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102c85ceef
[ 210.550696] RBP: ffff888161720428 R08: ffffffff8124c10e R09: ffffed103243beae
[ 210.550698] R10: ffff8881921df56b R11: ffffed103243bead R12: ffff8881841b4180
[ 210.550701] R13: ffff888161720428 R14: ffff8881616d0000 R15: ffff888161720380
[ 210.550704] FS: 00007fc27f025740(0000) GS:ffff888192000000(0000) knlGS:0000000000000000
[ 210.550706] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 210.550708] CR2: 0000557e4b41a6a0 CR3: 0000000002415004 CR4: 0000000000360ea0
[ 210.550711] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 210.550713] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 210.550715] Call Trace:
[ 210.550717] mlx5_del_flow_rules+0x484/0x490 [mlx5_core]
[ 210.550720] ? mlx5_cmd_set_fte+0xa80/0xa80 [mlx5_core]
[ 210.550722] mlx5_ib_destroy_flow+0x17f/0x280 [mlx5_ib]
[ 210.550724] uverbs_free_flow+0x4c/0x90 [ib_uverbs]
[ 210.550726] destroy_hw_idr_uobject+0x41/0xb0 [ib_uverbs]
[ 210.550728] uverbs_destroy_uobject+0xaa/0x390 [ib_uverbs]
[ 210.550731] __uverbs_cleanup_ufile+0x129/0x1b0 [ib_uverbs]
[ 210.550733] ? uverbs_destroy_uobject+0x390/0x390 [ib_uverbs]
[ 210.550735] uverbs_destroy_ufile_hw+0x78/0x190 [ib_uverbs]
[ 210.550737] ib_uverbs_close+0x36/0x140 [ib_uverbs]
[ 210.550739] __fput+0x181/0x380
[ 210.550741] task_work_run+0x88/0xd0
[ 210.550743] do_exit+0x5f6/0x13b0
[ 210.550745] ? sched_clock_cpu+0x30/0x140
[ 210.550747] ? is_current_pgrp_orphaned+0x70/0x70
[ 210.550750] ? lock_downgrade+0x360/0x360
[ 210.550752] ? mark_held_locks+0x1d/0x90
[ 210.550754] do_group_exit+0x8a/0x140
[ 210.550756] get_signal+0x20a/0xf50
[ 210.550758] do_signal+0x8c/0xbe0
[ 210.550760] ? hrtimer_nanosleep+0x1d8/0x200
[ 210.550762] ? nanosleep_copyout+0x50/0x50
[ 210.550764] ? restore_sigcontext+0x320/0x320
[ 210.550766] ? __hrtimer_init+0xf0/0xf0
[ 210.550768] ? timespec64_add_safe+0x150/0x150
[ 210.550770] ? mark_held_locks+0x1d/0x90
[ 210.550772] ? lockdep_hardirqs_on_prepare+0x14c/0x240
[ 210.550774] __prepare_exit_to_usermode+0x119/0x170
[ 210.550776] do_syscall_64+0x65/0x300
[ 210.550778] ? trace_hardirqs_off+0x10/0x120
[ 210.550781] ? mark_held_locks+0x1d/0x90
[ 210.550783] ? asm_sysvec_apic_timer_interrupt+0xa/0x20
[ 210.550785] ? lockdep_hardirqs_on+0x112/0x190
[ 210.550787] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 210.550789] RIP: 0033:0x7fc27f1cd157
[ 210.550791] Code: Bad RIP value.
[ 210.550793] RSP: 002b:00007ffd4db27ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000023
[ 210.550798] RAX: fffffffffffffdfc RBX: ffffffffffffff80 RCX: 00007fc27f1cd157
[ 210.550800] RDX: 00007fc27f025740 RSI: 00007ffd4db27eb0 RDI: 00007ffd4db27eb0
[ 210.550803] RBP: 0000000000000016 R08: 0000000000000000 R09: 000000000000000e
[ 210.550805] R10: 00007ffd4db27dc7 R11: 0000000000000246 R12: 0000000000400c00
[ 210.550808] R13: 00007ffd4db285f0 R14: 0000000000000000 R15: 0000000000000000
[ 210.550809] irq event stamp: 49399
[ 210.550812] hardirqs last enabled at (49399): [<ffffffff81172d36>] console_unlock+0x556/0x6f0
[ 210.550815] hardirqs last disabled at (49398): [<ffffffff81172897>] console_unlock+0xb7/0x6f0
[ 210.550818] softirqs last enabled at (48706): [<ffffffff81e0037b>] __do_softirq+0x37b/0x60c
[ 210.550820] softirqs last disabled at (48697): [<ffffffff81c00e2f>] asm_call_on_stack+0xf/0x20
[ 210.550822] ---[ end trace ad18c0e6fa846454 ]---
[ 210.581862] mlx5_core 0000:00:0c.0: mlx5_destroy_flow_table:2132:(pid 342): Flow table 262150 wasn't destroyed, refcount > 1
Fixes: a7ee18bdee83 ("RDMA/mlx5: Allow creating a matcher for a NIC TX flow table")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Bond events handler uses bond_slave_get_rtnl to check if net device
is bond slave. bond_slave_get_rtnl return the rcu rx_handler pointer
from the netdev which exists for bond slaves but also exists for
devices that are attached to linux bridge so using it as indication
for bond slave is wrong.
Fix by using netif_is_lag_port instead.
Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Both TC and IPsec crypto offload use metadata_regB to store
private information. Since TC does not use bit 31 of regB, IPsec
will use bit 31 as the IPsec packet marker. The IPsec's regB usage
is changed to:
Bit31: IPsec marker
Bit30-24: IPsec syndrome
Bit23-0: IPsec obj id
Fixes: b2ac7541e377 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The IP's checksum partial still requires L4 csum flag on Ethernet WQE.
Make the IPsec WAs only for the IP's non checksum partial case
(for example icmd packet)
Fixes: 5be019040cb7 ("net/mlx5e: IPsec: Add Connect-X IPsec Tx data path offload")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
On resync, the driver calls inet_lookup_established
(__inet6_lookup_established) that increases sk_refcnt of the socket. To
decrease it, the driver set skb->destructor to sock_edemux. However, it
didn't work well, because the TCP stack also sets this destructor for
early demux, and the refcount gets decreased only once, while increased
two times (in mlx5e and in the TCP stack). It leads to a socket leak, a
TLS context leak, which in the end leads to calling tls_dev_del twice:
on socket close and on driver unload, which in turn leads to a crash.
This commit fixes the refcount leak by calling sock_gen_put right away
after using the socket, thus fixing all the subsequent issues.
Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Now that the RDMA core deals with devices that only do DMA mapping in
lower layers properly, there is no user for dma_virt_ops and it can be
removed.
Link: https://lore.kernel.org/r/20201106181941.1878556-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove the pointless paddr variable that was only used once.
Link: https://lore.kernel.org/r/20201106181941.1878556-10-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Now that all users of dma_virt_ops are gone we can remove the workaround
for it in the PCI peer to peer code.
Link: https://lore.kernel.org/r/20201106181941.1878556-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use the ib_dma_* helpers to skip the DMA translation instead. This
removes the last user if dma_virt_ops and keeps the weird layering
violation inside the RDMA core instead of burderning the DMA mapping
subsystems with it. This also means the software RDMA drivers now don't
have to mess with DMA parameters that are not relevant to them at all, and
that in the future we can use PCI P2P transfers even for software RDMA, as
there is no first fake layer of DMA mapping that the P2P DMA support.
Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
RDMA ULPs should only perform DMA through the ib_dma_* API instead of
using the hidden dma_device directly. In addition using the dma coherent
API family that dmapool is a part of can be very ineffcient on plaforms
that are not DMA coherent. Switch to use slab allocations and the
ib_dma_* APIs instead.
Link: https://lore.kernel.org/r/20201106181941.1878556-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix system call exit path; avoid return to user space with any
TIF/CIF/PIF set
- fix file permission for cpum_sfb_size parameter
- another small defconfig update
* tag 's390-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpum_sf.c: fix file permission for cpum_sfb_size
s390: update defconfigs
s390: fix system call exit path
|
|
From https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
The rc RDMA branch is needed due to dependencies on the next patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix bug preventing booting on several platforms
- fix for build error, when modules need has_transparent_hugepage
- fix for memleak in alchemy clk setup
* tag 'mips_fixes_5.10_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Alchemy: Fix memleak in alchemy_clk_setup_cpu
MIPS: kernel: Fix for_each_memblock conversion
MIPS: export has_transparent_hugepage() for modules
|
|
During loss recovery, retransmitted packets are forced to use TCP
timestamps to calculate the RTT samples, which have a millisecond
granularity. BBR is designed using a microsecond granularity. As a
result, multiple RTT samples could be truncated to the same RTT value
during loss recovery. This is problematic, as BBR will not enter
PROBE_RTT if the RTT sample is <= the current min_rtt sample, meaning
that if there are persistent losses, PROBE_RTT will constantly be
pushed off and potentially never re-entered. This patch makes sure
that BBR enters PROBE_RTT by checking if RTT sample is < the current
min_rtt sample, rather than <=.
The Netflix transport/TCP team discovered this bug in the Linux TCP
BBR code during lab tests.
Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Ryan Sharpelletti <sharpelletti@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Link: https://lore.kernel.org/r/20201116174412.1433277-1-sharpelletti.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific))
in net/core/dev.c due to still having the NC-SI packet handler
registered.
# echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind
------------[ cut here ]------------
kernel BUG at net/core/dev.c:10254!
Internal error: Oops - BUG: 0 [#1] SMP ARM
CPU: 0 PID: 115 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00007-g02e0365710c4 #46
Hardware name: Generic DT based system
PC is at netdev_run_todo+0x314/0x394
LR is at cpumask_next+0x20/0x24
pc : [<806f5830>] lr : [<80863cb0>] psr: 80000153
sp : 855bbd58 ip : 00000001 fp : 855bbdac
r10: 80c03d00 r9 : 80c06228 r8 : 81158c54
r7 : 00000000 r6 : 80c05dec r5 : 80c05d18 r4 : 813b9280
r3 : 813b9054 r2 : 8122c470 r1 : 00000002 r0 : 00000002
Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none
Control: 00c5387d Table: 85514008 DAC: 00000051
Process sh (pid: 115, stack limit = 0x7cb5703d)
...
Backtrace:
[<806f551c>] (netdev_run_todo) from [<80707eec>] (rtnl_unlock+0x18/0x1c)
r10:00000051 r9:854ed710 r8:81158c54 r7:80c76bb0 r6:81158c10 r5:8115b410
r4:813b9000
[<80707ed4>] (rtnl_unlock) from [<806f5db8>] (unregister_netdev+0x2c/0x30)
[<806f5d8c>] (unregister_netdev) from [<805a8180>] (ftgmac100_remove+0x20/0xa8)
r5:8115b410 r4:813b9000
[<805a8160>] (ftgmac100_remove) from [<805355e4>] (platform_drv_remove+0x34/0x4c)
Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201117024448.1170761-1-joel@jms.id.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 39a6f4bce6b4 ("b44: replace the ssb_dma API with the generic DMA API")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1605582131-36735-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix file corruption due to event deletion in 'perf inject'.
- Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem
memcpy', silencing perf build warning.
- Avoid an msan warning in a copied stack in 'perf test'.
- Correct tracepoint field name "flags" in ARM's CS-ETM hardware
tracing 'perf test' entry.
- Update branch sample pattern for cs-etm to cope with excluding guest
in userspace counting.
- Don't free "lock_seq_stat" if read_count isn't zero in 'perf lock'.
* tag 'perf-tools-fixes-for-v5.10-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test: Avoid an msan warning in a copied stack.
perf inject: Fix file corruption due to event deletion
perf test: Update branch sample pattern for cs-etm
perf test: Fix a typo in cs-etm testing
tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
perf lock: Don't free "lock_seq_stat" if read_count isn't zero
perf lock: Correct field name "flags"
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 469981b17a4f ("qed: Add unaligned and packed packet processing")
Fixes: fcb39f6c10b2 ("qed: Add mpa buffer descriptors for storing and processing mpa fpdus")
Fixes: 1e28eaad07ea ("qed: Add iWARP support for fpdu spanned over more than two tcp packets")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Link: https://lore.kernel.org/r/1605532033-27373-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"A single commit that fixes a bug that was introduced a couple of merge
windows ago, but which rather more recently converged to an
agreed-upon fix. The bug is that interrupts can be incorrectly enabled
while holding an irq-disabled spinlock. This can of course result in
self-deadlocks.
The bug is a bit difficult to trigger. It requires that a preempted
task be blocking a preemptible-RCU grace period long enough to trigger
an RCU CPU stall warning. In addition, an interrupt must occur at just
the right time, and that interrupt's handler must acquire that same
irq-disabled spinlock. Still, a deadlock is a deadlock.
Furthermore, we do now have a fix, and that fix survives kernel test
robot, -next, and rcutorture testing. It has also been verified by
Sebastian as fixing the bug. Therefore..."
* 'urgent-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled
|
|
Fix to return a negative error code from the error handling case instead
of 0 in function sun8i_dw_hdmi_bind().
Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1605488969-5211-1-git-send-email-wangxiongfeng2@huawei.com
|
|
If the calls to of_match_device(), of_alias_get_id(),
devm_ioremap_resource(), devm_regmap_init_mmio() or devm_clk_get()
fail on probe of the NPCM FIU SPI driver, the spi_controller struct is
erroneously not freed.
Fix by switching over to the new devm_spi_alloc_master() helper.
Fixes: ace55c411b11 ("spi: npcm-fiu: add NPCM FIU controller driver")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v5.4+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v5.4+
Cc: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/a420c23a363a3bc9aa684c6e790c32a8af106d17.1605512876.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It turns out the IRQs most like can be unmasked before the controller is
enabled with no problematic consequences. The manual doesn't explicitly
state that, but the examples perform the controller initialization
procedure in that order. So the commit da8f58909e7e ("spi: dw: Unmask IRQs
after enabling the chip") hasn't been that required as I thought. But
anyway setting the IRQs up after the chip enabling still worth adding
since it has simplified the code a bit. The problem is that it has
introduced a potential bug. The transfer handler pointer is now
initialized after the IRQs are enabled. That may and eventually will cause
an invalid or uninitialized callback invocation. Fix that just by
performing the callback initialization before the IRQ unmask procedure.
Fixes: da8f58909e7e ("spi: dw: Unmask IRQs after enabling the chip")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20201117094054.4696-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When adding __user annotations in commit 2adf5352a34a, the
strncpy_from_user() function declaration for the
CONFIG_GENERIC_STRNCPY_FROM_USER case was missed. Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Message-Id: <20200831210937.17938-1-laurent.pinchart@ideasonboard.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Found one more Logitech device, BCC950 ConferenceCam, which needs
the same delay here. This makes 3 out of 3 devices I have tried.
Therefore, add a delay for all Logitech devices as it does not hurt.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org> # 4.19.y, 5.4.y
Link: https://lore.kernel.org/r/20201117122803.24310-1-joakim.tjernlund@infinera.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq-arm fixes for 5.10-rc5 from Viresh Kumar:
"- tegra186: Fix ->get() callback.
- arm/scmi: Add dummy clock provider to fix failure."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix OPP addition failure with a dummy clock provider
cpufreq: tegra186: Fix get frequency callback
|
|
This change switches rapl to use PMU_FORMAT_ATTR, and fixes two other
macros to use device_attribute instead of kobj_attribute to avoid
callback type mismatches that trip indirect call checking with Clang's
Control-Flow Integrity (CFI).
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20201113183126.1239404-1-samitolvanen@google.com
|
