| Age | Commit message (Collapse) | Author |
|---|
|
Add NEW to the spec, it was useful testing the fix for OvS
input validation.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230814205627.2914583-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the xarray changes we mix returning valid ifindex and negative
errno in a single int returned from dev_index_reserve(). This depends
on the fact that ifindexes can't be negative. Otherwise we may insert
into the xarray and return a very large negative value. This in turn
may break ERR_PTR().
OvS is susceptible to this problem and lacking validation (fix posted
separately for net).
Reject negative ifindex explicitly. Add a warning because the input
validation is better handled by the caller.
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230814205627.2914583-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mario reports that loading r8152 on his system leads to a:
netif_napi_add_weight() called with weight 256
warning getting printed. We don't have any solid data
on why such high budget was chosen, and it may cause
stalls in processing other softirqs and rt threads.
So try to switch back to the default (64) weight.
If this slows down someone's system we should investigate
which part of stopping starting the NAPI poll in this
driver are expensive.
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/all/0bfd445a-81f7-f702-08b0-bd5a72095e49@amd.com/
Acked-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230814153521.2697982-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit bdfe2da6aefd ("e1000e: cosmetic move of function prototypes to the new mac.h")
declared but never implemented them.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230814135821.4808-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Newer versions of clang warn about this variable being assigned but
never used:
drivers/net/ethernet/qlogic/qed/qed_vf.c:63:67: error: parameter 'resp_size' set but not used [-Werror,-Wunused-but-set-parameter]
There is no indication in the git history on how this was ever
meant to be used, so just remove the entire calculation and argument
passing for it to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230814074512.1067715-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev trigger and primitive bliking offloading as well as
simple set_brigthness function for both PHY LEDs of the in-SoC PHYs
found in MT7981 and MT7988.
For MT7988, read boottrap register and apply LED polarities accordingly
to get uniform behavior from all LEDs on MT7988.
This requires syscon phandle 'mediatek,pio' present in parenting MDIO bus
which should point to the syscon holding the boottrap register.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/dc324d48c00cd7350f3a506eaa785324cae97372.1691977904.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel says:
====================
nexthop: Various cleanups
Benefit from recent bug fixes and simplify the nexthop dump code.
No regressions in existing tests:
# ./fib_nexthops.sh
[...]
Tests passed: 234
Tests failed: 0
====================
Link: https://lore.kernel.org/r/20230813164856.2379822-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The nexthop and nexthop bucket dump callbacks previously returned a
positive return code even when the dump was complete, prompting the core
netlink code to invoke the callback again, until returning zero.
Zero was only returned by these callbacks when no information was filled
in the provided skb, which was achieved by incrementing the dump
sentinel at the end of the dump beyond the ID of the last nexthop.
This is no longer necessary as when the dump is complete these callbacks
return zero.
Remove the unnecessary increment.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230813164856.2379822-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before commit f10d3d9df49d ("nexthop: Make nexthop bucket dump more
efficient"), rtm_dump_nexthop_bucket_nh() returned a non-zero return
code for each resilient nexthop group whose buckets it dumped,
regardless if it encountered an error or not.
This meant that the sentinel ('dd->ctx->nh.idx') used by the function
that walked the different nexthops could not be used as a sentinel for
the bucket dump, as otherwise buckets from the same group would be
dumped over and over again.
This was dealt with by adding another sentinel ('dd->ctx->done_nh_idx')
that was incremented by rtm_dump_nexthop_bucket_nh() after successfully
dumping all the buckets from a given group.
After the previously mentioned commit this sentinel is no longer
necessary since the function no longer returns a non-zero return code
when successfully dumping all the buckets from a given group.
Remove this sentinel and simplify the code.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230813164856.2379822-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Andrea Mayer says:
====================
seg6: add NEXT-C-SID support for SRv6 End.X behavior
In the Segment Routing (SR) architecture a list of instructions, called
segments, can be added to the packet headers to influence the forwarding and
processing of the packets in an SR enabled network.
Considering the Segment Routing over IPv6 data plane (SRv6) [1], the segment
identifiers (SIDs) are IPv6 addresses (128 bits) and the segment list (SID
List) is carried in the Segment Routing Header (SRH). A segment may correspond
to a "behavior" that is executed by a node when the packet is received.
The Linux kernel currently supports a large subset of the behaviors described
in [2] (e.g., End, End.X, End.T and so on).
In some SRv6 scenarios, the number of segments carried by the SID List may
increase dramatically, reducing the MTU (Maximum Transfer Unit) size and/or
limiting the processing power of legacy hardware devices (due to longer IPv6
headers).
The NEXT-C-SID mechanism [3] extends the SRv6 architecture by providing several
ways to efficiently represent the SID List.
By leveraging the NEXT-C-SID, it is possible to encode several SRv6 segments
within a single 128 bit SID address (also referenced as Compressed SID
Container). In this way, the length of the SID List can be drastically reduced.
The NEXT-C-SID mechanism is built upon the "flavors" framework defined in [2].
This framework is already supported by the Linux SRv6 subsystem and is used to
modify and/or extend a subset of existing behaviors.
In this patchset, we extend the SRv6 End.X behavior in order to support the
NEXT-C-SID mechanism.
In details, the patchset is made of:
- patch 1/2: add NEXT-C-SID support for SRv6 End.X behavior;
- patch 2/2: add selftest for NEXT-C-SID in SRv6 End.X behavior.
From the user space perspective, we do not need to change the iproute2 code to
support the NEXT-C-SID flavor for the SRv6 End.X behavior. However, we will
update the man page considering the NEXT-C-SID flavor applied to the SRv6 End.X
behavior in a separate patch.
[1] - https://datatracker.ietf.org/doc/html/rfc8754
[2] - https://datatracker.ietf.org/doc/html/rfc8986
[3] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
====================
Link: https://lore.kernel.org/r/20230812180926.16689-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This selftest is designed for testing the support of NEXT-C-SID flavor
for SRv6 End.X behavior. It instantiates a virtual network composed of
several nodes: hosts and SRv6 routers. Each node is realized using a
network namespace that is properly interconnected to others through veth
pairs, according to the topology depicted in the selftest script file.
The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged
by hosts for communicating with each other. Such routers i) apply
different SRv6 Policies to the traffic received from connected hosts,
considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID
compression mechanism for encoding several SRv6 segments within a single
128-bit SID address, referred to as a Compressed SID (C-SID) container.
The NEXT-C-SID is provided as a "flavor" of the SRv6 End.X behavior,
enabling it to properly process the C-SID containers. The correct
execution of the enabled NEXT-C-SID SRv6 End.X behavior is verified
through reachability tests carried out between hosts belonging to the
same VPN.
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Co-developed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230812180926.16689-3-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The NEXT-C-SID mechanism described in [1] offers the possibility of
encoding several SRv6 segments within a single 128 bit SID address. Such
a SID address is called a Compressed SID (C-SID) container. In this way,
the length of the SID List can be drastically reduced.
A SID instantiated with the NEXT-C-SID flavor considers an IPv6 address
logically structured in three main blocks: i) Locator-Block; ii)
Locator-Node Function; iii) Argument.
C-SID container
+------------------------------------------------------------------+
| Locator-Block |Loc-Node| Argument |
| |Function| |
+------------------------------------------------------------------+
<--------- B -----------> <- NF -> <------------- A --------------->
(i) The Locator-Block can be any IPv6 prefix available to the provider;
(ii) The Locator-Node Function represents the node and the function to
be triggered when a packet is received on the node;
(iii) The Argument carries the remaining C-SIDs in the current C-SID
container.
This patch leverages the NEXT-C-SID mechanism previously introduced in the
Linux SRv6 subsystem [2] to support SID compression capabilities in the
SRv6 End.X behavior [3].
An SRv6 End.X behavior with NEXT-C-SID flavor works as an End.X behavior
but it is capable of processing the compressed SID List encoded in C-SID
containers.
An SRv6 End.X behavior with NEXT-C-SID flavor can be configured to support
user-provided Locator-Block and Locator-Node Function lengths. In this
implementation, such lengths must be evenly divisible by 8 (i.e. must be
byte-aligned), otherwise the kernel informs the user about invalid
values with a meaningful error code and message through netlink_ext_ack.
If Locator-Block and/or Locator-Node Function lengths are not provided
by the user during configuration of an SRv6 End.X behavior instance with
NEXT-C-SID flavor, the kernel will choose their default values i.e.,
32-bit Locator-Block and 16-bit Locator-Node Function.
[1] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
[2] - https://lore.kernel.org/all/20220912171619.16943-1-andrea.mayer@uniroma2.it/
[3] - https://datatracker.ietf.org/doc/html/rfc8986#name-endx-l3-cross-connect
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230812180926.16689-2-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
genetlink: provide struct genl_info to dumps
One of the biggest (which is not to say only) annoyances with genetlink
handling today is that doit and dumpit need some of the same information,
but it is passed to them in completely different structs.
The implementations commonly end up writing a _fill() method which
populates a message and have to pass at least 6 parameters. 3 of which
are extracted manually from request info.
After a lot of umming and ahing I decided to populate struct genl_info
for dumps, without trying to factor out only the common parts.
This makes the adoption easiest.
In the future we may add a new version of dump which takes
struct genl_info *info as the second argument, instead of
struct netlink_callback *cb. For now developers have to call
genl_info_dump(cb) to get the info.
Typical genetlink families no longer get exposed to netlink protocol
internals like pid and seq numbers.
v3:
- correct the condition in ethtool code (patch 10)
v2: https://lore.kernel.org/all/20230810233845.2318049-1-kuba@kernel.org/
- replace the GENL_INFO_NTF() macro with init helper
- fix the commit messages
v1: https://lore.kernel.org/all/20230809182648.1816537-1-kuba@kernel.org/
====================
Link: https://lore.kernel.org/r/20230814214723.2924989-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We had a number of bugs in the past because developers forgot
to fully test dumps, which pass NULL as info to .prepare_data.
.prepare_data implementations would try to access info->extack
leading to a null-deref.
Now that dumps and notifications can access struct genl_info
we can pass it in, and remove the info null checks.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # pause
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass struct genl_info directly instead of its members.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the just added APIs to make the code simpler.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add some APIs and helpers required for convenient construction
of replies and notifications based on struct genl_info.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Having family in struct genl_info is quite useful. It cuts
down the number of arguments which need to be passed to
helpers which already take struct genl_info.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since dumps carry struct genl_info now, use the attrs pointer
from genl_info and remove the one in struct genl_dumpit_info.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netlink GET implementations must currently juggle struct genl_info
and struct netlink_callback, depending on whether they were called
from doit or dumpit.
Add genl_info to the dump state and populate the fields.
This way implementations can simply pass struct genl_info around.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only three families use info->userhdr today and going forward
we discourage using fixed headers in new families.
So having the pointer to user header in struct genl_info
is an overkill. Compute the header pointer at runtime.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct netlink_callback has a const nlh pointer, make the
pointer in struct genl_info const as well, to make copying
between the two easier.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helpers which take/release the genl mutex based
on family->parallel_ops. Remove the separation between
handling of ops in locked and parallel families.
Future patches would make the duplicated code grow even more.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kumar reported a KASAN splat in tcp_v6_rcv:
bash-5.2# ./test_progs -t btf_skc_cls_ingress
...
[ 51.810085] BUG: KASAN: slab-out-of-bounds in tcp_v6_rcv+0x2d7d/0x3440
[ 51.810458] Read of size 2 at addr ffff8881053f038c by task test_progs/226
The problem is that inet[6]_steal_sock accesses sk->sk_protocol without
accounting for request or timewait sockets. To fix this we can't just
check sock_common->skc_reuseport since that flag is present on timewait
sockets.
Instead, add a fullsock check to avoid the out of bands access of sk_protocol.
Fixes: 9c02bec95954 ("bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230815-bpf-next-v2-1-95126eaa4c1b@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
David Vernet says:
====================
The struct bpf_struct_ops structure in BPF is a framework that allows
subsystems to extend themselves using BPF. In commit 68b04864ca425
("bpf: Create links for BPF struct_ops maps") and commit aef56f2e918bf
("bpf: Update the struct_ops of a bpf_link"), the structure was updated
to include new ->validate() and ->update() callbacks respectively in
support of allowing struct_ops maps to be created with BPF_F_LINK.
The intention was that struct bpf_struct_ops implementations could
support map updates through the link. Because map validation and
registration would take place in two separate steps for struct_ops
maps managed by the link (the first in map update elem, and the latter
in link create), the ->validate() callback was added, and any struct_ops
implementation that wished to use BPF_F_LINK, even just for lifetime
management, would then be required to define both it and ->update().
Not all struct_ops implementations can or will support update, however.
For example, the sched_ext struct_ops implementation proposed in [0]
will not be able to support atomic map updates because it can race with
sysrq, has to cycle tasks through various states in order to safely
transition, etc. It can, however, benefit from letting the BPF link
automatically evict the struc_ops map when the application exits (e.g.
if it crashes).
This patch set therefore:
1. Updates the struct_ops implementation to support default values for
->validate() and ->update() so that struct_ops implementations can
benefit from BPF_F_LINK management even if they can't support
updates.
2. Documents struct bpf_struct_ops so that the semantics are clear and
well defined.
---
v2: https://lore.kernel.org/bpf/0f5ea3de-c6e7-490f-b5ec-b5c7cd288687@gmail.com/T/
Changes from v2 -> v3:
- Add patch 2/2 that documents the struct bpf_struct_ops structure.
- Add Kui-Feng's Acked-by tag to patch 1/2.
v1: https://lore.kernel.org/lkml/20230811150934.GA542801@maniforge/
Changes from v1 -> v2:
- Move the if (!st_map->st_ops->update) check outside of the critical
section before we acquire the update_mutex.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Subsystems that want to implement a struct bpf_struct_ops structure to
enable struct_ops maps must currently reverse engineer how the structure
works. Given that this is meant to be a way for subsystem maintainers to
extend their subsystems using BPF, let's document it to make it a bit
easier on them.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230814185908.700553-3-void@manifault.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Currently, if a struct_ops map is loaded with BPF_F_LINK, it must also
define the .validate() and .update() callbacks in its corresponding
struct bpf_struct_ops in the kernel. Enabling struct_ops link is useful
in its own right to ensure that the map is unloaded if an application
crashes. For example, with sched_ext, we want to automatically unload
the host-wide scheduler if the application crashes. We would likely
never support updating elements of a sched_ext struct_ops map, so we'd
have to implement these callbacks showing that they _can't_ support
element updates just to benefit from the basic lifetime management of
struct_ops links.
Let's enable struct_ops maps to work with BPF_F_LINK even if they
haven't defined these callbacks, by assuming that a struct_ops map
element cannot be updated by default.
Acked-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230814185908.700553-2-void@manifault.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add several new tcx test cases to improve test coverage. This also includes
a few new tests with ingress instead of clsact qdisc, to cover the fix from
commit dc644b540a2d ("tcx: Fix splat in ingress_destroy upon tcx_entry_free").
# ./test_progs -t tc
[...]
#234 tc_links_after:OK
#235 tc_links_append:OK
#236 tc_links_basic:OK
#237 tc_links_before:OK
#238 tc_links_chain_classic:OK
#239 tc_links_chain_mixed:OK
#240 tc_links_dev_cleanup:OK
#241 tc_links_dev_mixed:OK
#242 tc_links_ingress:OK
#243 tc_links_invalid:OK
#244 tc_links_prepend:OK
#245 tc_links_replace:OK
#246 tc_links_revision:OK
#247 tc_opts_after:OK
#248 tc_opts_append:OK
#249 tc_opts_basic:OK
#250 tc_opts_before:OK
#251 tc_opts_chain_classic:OK
#252 tc_opts_chain_mixed:OK
#253 tc_opts_delete_empty:OK
#254 tc_opts_demixed:OK
#255 tc_opts_detach:OK
#256 tc_opts_detach_after:OK
#257 tc_opts_detach_before:OK
#258 tc_opts_dev_cleanup:OK
#259 tc_opts_invalid:OK
#260 tc_opts_mixed:OK
#261 tc_opts_prepend:OK
#262 tc_opts_replace:OK
#263 tc_opts_revision:OK
[...]
Summary: 44/38 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/8699efc284b75ccdc51ddf7062fa2370330dc6c0.1692029283.git.daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a phylink_get_caps implementation for Marvell 88e6060 DSA switch.
This is a fast ethernet switch, with internal PHYs for ports 0 through
4. Port 4 also supports MII, REVMII, REVRMII and SNI. Port 5 supports
MII, REVMII, REVRMII and SNI without an internal PHY.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1qUkx7-003dMX-9b@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whenever mlx5 driver is probed or reloaded, it queries some capabilities
in MAX mode via set_hca_cap() API. Afterwards, the driver queries all
capabilities in MAX mode via mlx5_query_hca_caps() API.
Since MAX caps are read only caps, querying them twice is redundant.
Hence, delete the second query.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Each device cap has two modes: MAX and CUR. The driver maintains a
cache of both modes of the capabilities. For most device caps, the MAX
cap mode is never used.
Hence, remove all driver queries of the MAX mode of the said caps as
well as their helper MACROs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5 driver queries the device for VECTOR_CALC and SHAMPO caps, but
there isn't any user who requires them.
As well as, MLX5_MCAM_REGS_0x9080_0x90FF is queried but not used.
Thus, drop all usages and definitions of the mentioned caps above.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
sw_function_id contains sfnum, so fix the error message to name the
value properly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Since mlx5_vhca_event_supported() is called in mlx5_sf_dev_supported(),
remove the redundant call.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
MLX5_CAP_GEN()
There is a helper called mlx5_sf_start_function_id() that
wraps up a query to get base SF function id. Use that instead of
calling MLX5_CAP_GEN() directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Since mlx5_sf_supported() check is done as a first thing in
mlx5_sf_max_functions(), remove the redundant check.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Instead of using device_put(), use auxiliary_device_uninit() for
auxiliary device uninit which internally just calls device_put().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Firmware doesn't allow flow rules in FDB to do header rewrite and send
packets to both internal and uplink vports. The following syndrome
will be generated when trying to offload such kind of rules:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 23569): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8c8f08), err(-22)
To avoid this syndrome, add a checking before creating FTE. If a rule
with header rewrite action forwards packets to both VF and PF, an
error is returned directly.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Even if the PF driver had no error on his part of the sync reset flow,
the firmware can see wider picture as it syncs all the PFs in the flow.
So add at end of sync reset flow check with firmware by reading MFRL
register and initialization segment that the flow had no issue from
firmware point of view too.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Introduce devlink resource for exposing max possible SFs on mlx5
devices.
For example:
$ devlink resource show pci/0000:00:0b.0
pci/0000:00:0b.0:
name max_local_SFs size 5 unit entry dpipe_tables none
name max_external_SFs size 0 unit entry dpipe_tables none
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
A new check for the tx devlink health reporter is introduced for
determining when the PTP port timestamping SQ is considered unhealthy. If
there are enough CQEs considered never to be delivered, the space that can
be utilized on the SQ decreases significantly, impacting performance and
usability of the SQ. The health reporter is triggered when the number of
likely never delivered port timestamping CQEs that utilize the space of the
PTP SQ is greater than 93.75% of the total capacity of the SQ. A devlink
health reporter recover method is also provided for this specific TX error
context that restarts the PTP SQ.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Use a map structure for associating CQEs containing port timestamping
information with the appropriate skb. Track order of WQEs submitted using a
FIFO. Check if the corresponding port timestamping CQEs from the lookup
values in the FIFO are considered dropped due to time elapsed. Return the
lookup value to a freelist after consuming the skb. Reuse the freed lookup
in future WQE submission iterations.
The map structure uses an integer identifier for the key and returns an skb
corresponding to that identifier. Embed the integer identifier in the WQE
submitted to the WQ for the transmit path when the SQ is a PTP (port
timestamping) SQ. The embedded identifier can then be queried using a field
in the CQE of the corresponding port timestamping CQ. In the port
timestamping napi_poll context, the identifier is queried from the CQE
polled from CQ and used to lookup the corresponding skb from the WQE submit
path. The skb reference is removed from map and then embedded with the port
HW timestamp information from the CQE and eventually consumed.
The metadata freelist FIFO is an array containing integer identifiers that
can be pushed and popped in the FIFO. The purpose of this structure is
bookkeeping what identifier values can safely be used in a subsequent WQE
submission and should not contain identifiers that have still not been
reaped by processing a corresponding CQE completion on the port
timestamping CQ.
The ts_cqe_pending_list structure is a combination of an array and linked
list. The array is pre-populated with the nodes that will be added and
removed from the head of the linked list. Each node contains the unique
identifier value associated with the values submitted in the WQEs and
retrieved in the port timestamping CQEs. When a WQE is submitted, the node
in the array corresponding to the identifier popped from the metadata
freelist is added to the end of the CQE pending list and is marked as
"in-use". The node is removed from the linked list under two conditions.
The first condition is that the corresponding port timestamping CQE is
polled in the PTP napi_poll context. The second condition is that more than
a second has elapsed since the DMA timestamp value corresponding to the WQE
submission. When the first condition occurs, the "in-use" bit in the linked
list node is cleared, and the resources corresponding to the WQE submission
are then released. The second condition, however, indicates that the port
timestamping CQE will likely never be delivered. It's not impossible for
the device to post a CQE after an infinite amount of time though highly
improbable. In order to be resilient to this improbable case, resources
related to the corresponding WQE submission are still kept, the identifier
value is not returned to the freelist, and the "in-use" bit is cleared on
the node to indicate that it's no longer part of the linked list of "likely
to be delivered" port timestamping CQE identifiers. A count for the number
of port timestamping CQEs considered highly likely to never be delivered by
the device is maintained. This count gets decremented in the unlikely event
a port timestamping CQE considered unlikely to ever be delivered is polled
in the PTP napi_poll context.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
De-duplicate documentation by removing mellanox/mlx5/devlink.rst. Instead,
only use the generic devlink documentation directory to document mlx5
devlink parameters. Avoid providing general devlink tool usage information
in mlx5-specific documentation.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Jiri Pirko says:
====================
devlink: introduce selective dumps
Motivation:
For SFs, one devlink instance per SF is created. There might be
thousands of these on a single host. When a user needs to know port
handle for specific SF, he needs to dump all devlink ports on the host
which does not scale good.
Solution:
Allow user to pass devlink handle (and possibly other attributes)
alongside the dump command and dump only objects which are matching
the selection.
Use split ops to generate policies for dump callbacks acccording to
the attributes used for selection.
The userspace can use ctrl genetlink GET_POLICY command to find out if
the selective dumps are supported by kernel for particular command.
Example:
$ devlink port show
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
$ devlink port show auxiliary/mlx5_core.eth.0
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
$ devlink port show auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
Extension:
patches #12 and #13 extends selection attributes by port index
for health reporter dumping.
====================
Link: https://lore.kernel.org/r/20230811155714.1736405-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow user to pass port index for health reporter dump request.
Re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-14-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a possibility for devlink object to expose attributes it
supports for selection of dumped objects.
Use this by health reporter to indicate it supports port index based
selection of dump objects. Implement this selection mechanism in
devlink_nl_cmd_health_reporter_get_dump_one()
Example:
$ devlink health
pci/0000:08:00.0:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter fw_fatal
state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32768:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32769:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32770:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter fw_fatal
state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1/98304:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1/98305:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1/98306:
reporter vnic
state healthy error 0 recover 0
$ devlink health show pci/0000:08:00.0
pci/0000:08:00.0:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter fw_fatal
state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32768:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32769:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32770:
reporter vnic
state healthy error 0 recover 0
$ devlink health show pci/0000:08:00.0/32768
pci/0000:08:00.0/32768:
reporter vnic
state healthy error 0 recover 0
The last command is possible because of this patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-13-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
instance attributes
Extend per-instance dump command definitions to accept instance
attributes. Allow parsing of devlink handle attributes so they could
be used for instance selection.
Re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-12-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For SFs, one devlink instance per SF is created. There might be
thousands of these on a single host. When a user needs to know port
handle for specific SF, he needs to dump all devlink ports on the host
which does not scale good.
Allow user to pass devlink handle attributes alongside the dump command
and dump only objects which are under selected devlink instance.
Example:
$ devlink port show
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
$ devlink port show auxiliary/mlx5_core.eth.0
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
$ devlink port show auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-11-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the commands are already defined in split ops, remove them
from small ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-10-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the duplicate temporary netlink callback prototype as the
generated ones are already in place.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
