summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-03can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is onStephane Grosjean
Echo management is driven by PUCAN_MSG_LOOPED_BACK bit, while loopback frames are identified with PUCAN_MSG_SELF_RECEIVE bit. Those bits are set for each outgoing frame written to the IP core so that a copy of each one will be placed into the rx path. Thus, - when PUCAN_MSG_LOOPED_BACK is set then the rx frame is an echo of a previously sent frame, - when PUCAN_MSG_LOOPED_BACK+PUCAN_MSG_SELF_RECEIVE are set, then the rx frame is an echo AND a loopback frame. Therefore, this frame must be put into the socket rx path too. This patch fixes how CAN frames are handled when these are sent while the can interface is configured in "loopback on" mode. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20201013153947.28012-1-s.grosjean@peak-system.com Fixes: 8ac8321e4a79 ("can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boards") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrappingStephane Grosjean
Fabian Inostroza <fabianinostrozap@gmail.com> has discovered a potential problem in the hardware timestamp reporting from the PCAN-USB USB CAN interface (only), related to the fact that a timestamp of an event may precede the timestamp used for synchronization when both records are part of the same USB packet. However, this case was used to detect the wrapping of the time counter. This patch details and fixes the two identified cases where this problem can occur. Reported-by: Fabian Inostroza <fabianinostrozap@gmail.com> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20201014085631.15128-1-s.grosjean@peak-system.com Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: peak_usb: add range checking in decode operationsDan Carpenter
These values come from skb->data so Smatch considers them untrusted. I believe Smatch is correct but I don't have a way to test this. The usb_if->dev[] array has 2 elements but the index is in the 0-15 range without checks. The cfd->len can be up to 255 but the maximum valid size is CANFD_MAX_DLEN (64) so that could lead to memory corruption. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200813140604.GA456946@mwanda Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: xilinx_can: handle failure cases of pm_runtime_get_syncNavid Emamdoost
Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20200605033239.60664-1-navid.emamdoost@gmail.com Fixes: 4716620d1b62 ("can: xilinx: Convert to runtime_pm") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error pathZhang Changzhong
The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix it by adding a clk_disable_unprepare() in error path. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1594973079-27743-1-git-send-email-zhangchangzhong@huawei.com Fixes: befa60113ce7 ("can: ti_hecc: add missing prepare and unprepare of the clock") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: isotp: padlen(): make const array static, makes object smallerColin Ian King
Don't populate the const array plen on the stack but instead it static. Makes the object code smaller by 926 bytes. Before: text data bss dec hex filename 26531 1943 64 28538 6f7a net/can/isotp.o After: text data bss dec hex filename 25509 2039 64 27612 6bdc net/can/isotp.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201020154203.54711-1-colin.king@canonical.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only modeOliver Hartkopp
As reported by Thomas Wagner: https://github.com/hartkopp/can-isotp/issues/34 the timeout handling for data frames is not enabled when the isotp socket is used in listen-only mode (sockopt CAN_ISOTP_LISTEN_MODE). This mode is enabled by the isotpsniffer application which therefore became inconsistend with the strict rx timeout rules when running the isotp protocol in the operational mode. This patch fixes this inconsistency by moving the return condition for the listen-only mode behind the timeout handling code. Reported-by: Thomas Wagner <thwa1@web.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://github.com/hartkopp/can-isotp/issues/34 Link: https://lore.kernel.org/r/20201019120229.89326-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: isotp: Explain PDU in CAN_ISOTP help textGeert Uytterhoeven
The help text for the CAN_ISOTP config symbol uses the acronym "PDU". However, this acronym is not explained here, nor in Documentation/networking/can.rst. Expand the acronym to make it easier for users to decide if they need to enable the CAN_ISOTP option or not. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201013141341.28487-1-geert+renesas@glider.be Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: j1939: j1939_sk_bind(): return failure if netdev is downZhang Changzhong
When a netdev down event occurs after a successful call to j1939_sk_bind(), j1939_netdev_notify() can handle it correctly. But if the netdev already in down state before calling j1939_sk_bind(), j1939_sk_release() will stay in wait_event_interruptible() blocked forever. Because in this case, j1939_netdev_notify() won't be called and j1939_tp_txtimer() won't call j1939_session_cancel() or other function to clear session for ENETDOWN error, this lead to mismatch of j1939_session_get/put() and jsk->skb_pending will never decrease to zero. To reproduce it use following commands: 1. ip link add dev vcan0 type vcan 2. j1939acd -r 100,80-120 1122334455667788 vcan0 3. presses ctrl-c and thread will be blocked forever This patch adds check for ndev->flags in j1939_sk_bind() to avoid this kind of situation and return with -ENETDOWN. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1599460308-18770-1-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: j1939: use backquotes for code samplesYegor Yefremov
This patch adds backquotes for code samples. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20201026094442.16587-1-yegorslists@googlemail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: j1939: swap addr and pgn in the send exampleYegor Yefremov
The address was wrongly assigned to the PGN field and vice versa. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20201022083708.8755-1-yegorslists@googlemail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: j1939: fix syntax and spellingYegor Yefremov
This patches fixes the syntax an spelling of the j1939 documentation. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20201020101043.6369-1-yegorslists@googlemail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: j1939: rename jacd toolYegor Yefremov
Due to naming conflicts, jacd was renamed to j1939acd in: https://github.com/linux-can/can-utils/pull/199 Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20201020081134.3597-1-yegorslists@googlemail.com Link: https://github.com/linux-can/can-utils/pull/199 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()Oleksij Rempel
All user space generated SKBs are owned by a socket (unless injected into the key via AF_PACKET). If a socket is closed, all associated skbs will be cleaned up. This leads to a problem when a CAN driver calls can_put_echo_skb() on a unshared SKB. If the socket is closed prior to the TX complete handler, can_get_echo_skb() and the subsequent delivering of the echo SKB to all registered callbacks, a SKB with a refcount of 0 is delivered. To avoid the problem, in can_get_echo_skb() the original SKB is now always cloned, regardless of shared SKB or not. If the process exists it can now safely discard its SKBs, without disturbing the delivery of the echo SKB. The problem shows up in the j1939 stack, when it clones the incoming skb, which detects the already 0 refcount. We can easily reproduce this with following example: testj1939 -B -r can0: & cansend can0 1823ff40#0123 WARNING: CPU: 0 PID: 293 at lib/refcount.c:25 refcount_warn_saturate+0x108/0x174 refcount_t: addition on 0; use-after-free. Modules linked in: coda_vpu imx_vdoa videobuf2_vmalloc dw_hdmi_ahb_audio vcan CPU: 0 PID: 293 Comm: cansend Not tainted 5.5.0-rc6-00376-g9e20dcb7040d #1 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c010f570>] (dump_backtrace) from [<c010f90c>] (show_stack+0x20/0x24) [<c010f8ec>] (show_stack) from [<c0c3e1a4>] (dump_stack+0x8c/0xa0) [<c0c3e118>] (dump_stack) from [<c0127fec>] (__warn+0xe0/0x108) [<c0127f0c>] (__warn) from [<c01283c8>] (warn_slowpath_fmt+0xa8/0xcc) [<c0128324>] (warn_slowpath_fmt) from [<c0539c0c>] (refcount_warn_saturate+0x108/0x174) [<c0539b04>] (refcount_warn_saturate) from [<c0ad2cac>] (j1939_can_recv+0x20c/0x210) [<c0ad2aa0>] (j1939_can_recv) from [<c0ac9dc8>] (can_rcv_filter+0xb4/0x268) [<c0ac9d14>] (can_rcv_filter) from [<c0aca2cc>] (can_receive+0xb0/0xe4) [<c0aca21c>] (can_receive) from [<c0aca348>] (can_rcv+0x48/0x98) [<c0aca300>] (can_rcv) from [<c09b1fdc>] (__netif_receive_skb_one_core+0x64/0x88) [<c09b1f78>] (__netif_receive_skb_one_core) from [<c09b2070>] (__netif_receive_skb+0x38/0x94) [<c09b2038>] (__netif_receive_skb) from [<c09b2130>] (netif_receive_skb_internal+0x64/0xf8) [<c09b20cc>] (netif_receive_skb_internal) from [<c09b21f8>] (netif_receive_skb+0x34/0x19c) [<c09b21c4>] (netif_receive_skb) from [<c0791278>] (can_rx_offload_napi_poll+0x58/0xb4) Fixes: 0ae89beb283a ("can: add destructor for self generated skbs") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: http://lore.kernel.org/r/20200124132656.22156-1-o.rempel@pengutronix.de Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: dev: __can_get_echo_skb(): fix real payload length return value for RTR ↵Oliver Hartkopp
frames The can_get_echo_skb() function returns the number of received bytes to be used for netdev statistics. In the case of RTR frames we get a valid (potential non-zero) data length value which has to be passed for further operations. But on the wire RTR frames have no payload length. Therefore the value to be used in the statistics has to be zero for RTR frames. Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201020064443.80164-1-socketcan@hartkopp.net Fixes: cf5046b309b3 ("can: dev: let can_get_echo_skb() return dlc of CAN frame") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03Merge tag 'perf-tools-for-v5.10-2020-11-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: "Only fixes and a sync of the headers so that the perf build is silent: - Fix visibility attribute in python module init code with newer gcc - Fix DRAM_BW_Use 0 issue for CLX/SKX in intel JSON vendor event files - Fix the build on new fedora by removing LTO compiler options when building perl support - Remove broken __no_tail_call attribute - Fix segfault when trying to trace events by cgroup - Fix crash with non-jited BPF progs - Increase buffer size in TUI browser, fixing format truncation - Fix printing of build-id for objects lacking one - Fix byte swapping for ino_generation field in MMAP2 perf.data records - Fix byte swapping for CGROUP perf.data records, for cross arch analysis of perf.data files - Fix the fast path of feature detection - Update kernel header copies" * tag 'perf-tools-for-v5.10-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits) tools feature: Fixup fast path feature detection perf tools: Add missing swap for cgroup events perf tools: Add missing swap for ino_generation perf tools: Initialize output buffer in build_id__sprintf perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse() tools include UAPI: Update linux/mount.h copy tools headers UAPI: Update tools's copy of linux/perf_event.h tools kvm headers: Update KVM headers from the kernel sources tools UAPI: Update copy of linux/mman.h from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools x86 headers: Update required-features.h header from the kernel tools x86 headers: Update cpufeatures.h headers copies tools headers UAPI: Update fscrypt.h copy tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync prctl.h with the kernel sources perf scripting python: Avoid declaring function pointers with a visibility attribute perf tools: Remove broken __no_tail_call attribute perf vendor events: Fix DRAM_BW_Use 0 issue for CLX/SKX perf trace: Fix segfault when trying to trace events by cgroup perf tools: Fix crash with non-jited bpf progs ...
2020-11-03can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ contextVincent Mailhol
If a driver calls can_get_echo_skb() during a hardware IRQ (which is often, but not always, the case), the 'WARN_ON(in_irq)' in net/core/skbuff.c#skb_release_head_state() might be triggered, under network congestion circumstances, together with the potential risk of a NULL pointer dereference. The root cause of this issue is the call to kfree_skb() instead of dev_kfree_skb_irq() in net/core/dev.c#enqueue_to_backlog(). This patch prevents the skb to be freed within the call to netif_rx() by incrementing its reference count with skb_get(). The skb is finally freed by one of the in-irq-context safe functions: dev_consume_skb_any() or dev_kfree_skb_any(). The "any" version is used because some drivers might call can_get_echo_skb() in a normal context. The reason for this issue to occur is that initially, in the core network stack, loopback skb were not supposed to be received in hardware IRQ context. The CAN stack is an exeption. This bug was previously reported back in 2017 in [1] but the proposed patch never got accepted. While [1] directly modifies net/core/dev.c, we try to propose here a smoother modification local to CAN network stack (the assumption behind is that only CAN devices are affected by this issue). [1] http://lore.kernel.org/r/57a3ffb6-3309-3ad5-5a34-e93c3fe3614d@cetitec.com Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20201002154219.4887-2-mailhol.vincent@wanadoo.fr Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: rx-offload: don't call kfree_skb() from IRQ contextMarc Kleine-Budde
A CAN driver, using the rx-offload infrastructure, is reading CAN frames (usually in IRQ context) from the hardware and placing it into the rx-offload queue to be delivered to the networking stack via NAPI. In case the rx-offload queue is full, trying to add more skbs results in the skbs being dropped using kfree_skb(). If done from hard-IRQ context this results in the following warning: [ 682.552693] ------------[ cut here ]------------ [ 682.557360] WARNING: CPU: 0 PID: 3057 at net/core/skbuff.c:650 skb_release_head_state+0x74/0x84 [ 682.566075] Modules linked in: can_raw can coda_vpu flexcan dw_hdmi_ahb_audio v4l2_jpeg imx_vdoa can_dev [ 682.575597] CPU: 0 PID: 3057 Comm: cansend Tainted: G W 5.7.0+ #18 [ 682.583098] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 682.589657] [<c0112628>] (unwind_backtrace) from [<c010c1c4>] (show_stack+0x10/0x14) [ 682.597423] [<c010c1c4>] (show_stack) from [<c06c481c>] (dump_stack+0xe0/0x114) [ 682.604759] [<c06c481c>] (dump_stack) from [<c0128f10>] (__warn+0xc0/0x10c) [ 682.611742] [<c0128f10>] (__warn) from [<c0129314>] (warn_slowpath_fmt+0x5c/0xc0) [ 682.619248] [<c0129314>] (warn_slowpath_fmt) from [<c0b95dec>] (skb_release_head_state+0x74/0x84) [ 682.628143] [<c0b95dec>] (skb_release_head_state) from [<c0b95e08>] (skb_release_all+0xc/0x24) [ 682.636774] [<c0b95e08>] (skb_release_all) from [<c0b95eac>] (kfree_skb+0x74/0x1c8) [ 682.644479] [<c0b95eac>] (kfree_skb) from [<bf001d1c>] (can_rx_offload_queue_sorted+0xe0/0xe8 [can_dev]) [ 682.654051] [<bf001d1c>] (can_rx_offload_queue_sorted [can_dev]) from [<bf001d6c>] (can_rx_offload_get_echo_skb+0x48/0x94 [can_dev]) [ 682.666007] [<bf001d6c>] (can_rx_offload_get_echo_skb [can_dev]) from [<bf01efe4>] (flexcan_irq+0x194/0x5dc [flexcan]) [ 682.676734] [<bf01efe4>] (flexcan_irq [flexcan]) from [<c019c1ec>] (__handle_irq_event_percpu+0x4c/0x3ec) [ 682.686322] [<c019c1ec>] (__handle_irq_event_percpu) from [<c019c5b8>] (handle_irq_event_percpu+0x2c/0x88) [ 682.695993] [<c019c5b8>] (handle_irq_event_percpu) from [<c019c64c>] (handle_irq_event+0x38/0x5c) [ 682.704887] [<c019c64c>] (handle_irq_event) from [<c01a1058>] (handle_fasteoi_irq+0xc8/0x180) [ 682.713432] [<c01a1058>] (handle_fasteoi_irq) from [<c019b2c0>] (generic_handle_irq+0x30/0x44) [ 682.722063] [<c019b2c0>] (generic_handle_irq) from [<c019b8f8>] (__handle_domain_irq+0x64/0xdc) [ 682.730783] [<c019b8f8>] (__handle_domain_irq) from [<c06df4a4>] (gic_handle_irq+0x48/0x9c) [ 682.739158] [<c06df4a4>] (gic_handle_irq) from [<c0100b30>] (__irq_svc+0x70/0x98) [ 682.746656] Exception stack(0xe80e9dd8 to 0xe80e9e20) [ 682.751725] 9dc0: 00000001 e80e8000 [ 682.759922] 9de0: e820cf80 00000000 ffffe000 00000000 eaf08fe4 00000000 600d0013 00000000 [ 682.768117] 9e00: c1732e3c c16093a8 e820d4c0 e80e9e28 c018a57c c018b870 600d0013 ffffffff [ 682.776315] [<c0100b30>] (__irq_svc) from [<c018b870>] (lock_acquire+0x108/0x4e8) [ 682.783821] [<c018b870>] (lock_acquire) from [<c0e938e4>] (down_write+0x48/0xa8) [ 682.791242] [<c0e938e4>] (down_write) from [<c02818dc>] (unlink_file_vma+0x24/0x40) [ 682.798922] [<c02818dc>] (unlink_file_vma) from [<c027a258>] (free_pgtables+0x34/0xb8) [ 682.806858] [<c027a258>] (free_pgtables) from [<c02835a4>] (exit_mmap+0xe4/0x170) [ 682.814361] [<c02835a4>] (exit_mmap) from [<c01248e0>] (mmput+0x5c/0x110) [ 682.821171] [<c01248e0>] (mmput) from [<c012e910>] (do_exit+0x374/0xbe4) [ 682.827892] [<c012e910>] (do_exit) from [<c0130888>] (do_group_exit+0x38/0xb4) [ 682.835132] [<c0130888>] (do_group_exit) from [<c0130914>] (__wake_up_parent+0x0/0x14) [ 682.843063] irq event stamp: 1936 [ 682.846399] hardirqs last enabled at (1935): [<c02938b0>] rmqueue+0xf4/0xc64 [ 682.853553] hardirqs last disabled at (1936): [<c0100b20>] __irq_svc+0x60/0x98 [ 682.860799] softirqs last enabled at (1878): [<bf04cdcc>] raw_release+0x108/0x1f0 [can_raw] [ 682.869256] softirqs last disabled at (1876): [<c0b8f478>] release_sock+0x18/0x98 [ 682.876753] ---[ end trace 7bca4751ce44c444 ]--- This patch fixes the problem by replacing the kfree_skb() by dev_kfree_skb_any(), as rx-offload might be called from threaded IRQ handlers as well. Fixes: ca913f1ac024 ("can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid skb mem leak") Fixes: 6caf8a6d6586 ("can: rx-offload: can_rx_offload_queue_tail(): fix error handling, avoid skb mem leak") Link: http://lore.kernel.org/r/20201019190524.1285319-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: proc: can_remove_proc(): silence remove_proc_entry warningZhang Changzhong
If can_init_proc() fail to create /proc/net/can directory, can_remove_proc() will trigger a warning: WARNING: CPU: 6 PID: 7133 at fs/proc/generic.c:672 remove_proc_entry+0x17b0 Kernel panic - not syncing: panic_on_warn set ... Fix to return early from can_remove_proc() if can proc_dir does not exists. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1594709090-3203-1-git-send-email-zhangchangzhong@huawei.com Fixes: 8e8cda6d737d ("can: initial support for network namespaces") Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yamlOleksij Rempel
In order to automate the verification of DT nodes convert fsl-flexcan.txt to fsl,flexcan.yaml Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201022075218.11880-3-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03dt-bindings: can: add can-controller.yamlOleksij Rempel
For now we have only node name as common rule for all CAN controllers Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201022075218.11880-2-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03net: usb: qmi_wwan: add Telit LE910Cx 0x1230 compositionDaniele Palmas
Add support for Telit LE910Cx 0x1230 composition: 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20201102110108.17244-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation build warning fixes from Jonathan Corbet: "This contains a series of warning fixes from Mauro; once applied, the number of warnings from the once-noisy docs build process is nearly zero. Getting to this point has required a lot of work; once there, hopefully we can keep things that way. I have packaged this as a separate pull because it does a fair amount of reaching outside of Documentation/. The changes are all in comments and in code placement. It's all been in linux-next since last week" * tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits) docs: SafeSetID: fix a warning amdgpu: fix a few kernel-doc markup issues selftests: kselftest_harness.h: fix kernel-doc markups drm: amdgpu_dm: fix a typo gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups drm: amdgpu: kernel-doc: update some adev parameters docs: fs: api-summary.rst: get rid of kernel-doc include IB/srpt: docs: add a description for cq_size member locking/refcount: move kernel-doc markups to the proper place docs: lockdep-design: fix some warning issues MAINTAINERS: fix broken doc refs due to yaml conversion ice: docs fix a devlink info that broke a table crypto: sun8x-ce*: update entries to its documentation net: phy: remove kernel-doc duplication mm: pagemap.h: fix two kernel-doc markups blk-mq: docs: add kernel-doc description for a new struct member docs: userspace-api: add iommu.rst to the index file docs: hwmon: mp2975.rst: address some html build warnings docs: net: statistics.rst: remove a duplicated kernel-doc docs: kasan.rst: add two missing blank lines ...
2020-11-03mptcp: token: fix unititialized variableDavide Caratti
gcc complains about use of uninitialized 'num'. Fix it by doing the first assignment of 'num' when the variable is declared. Fixes: 96d890daad05 ("mptcp: add msk interations helper") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/49e20da5d467a73414d4294a8bd35e2cb1befd49.1604308087.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03mpls: drop skb's dst in mpls_forward()Guillaume Nault
Commit 394de110a733 ("net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skb") added a test in dst_neigh_lookup_skb() to avoid a NULL pointer dereference. The root cause was the MPLS forwarding code, which doesn't call skb_dst_drop() on incoming packets. That is, if the packet is received from a collect_md device, it has a metadata_dst attached to it that doesn't implement any dst_ops function. To align the MPLS behaviour with IPv4 and IPv6, let's drop the dst in mpls_forward(). This way, dst_neigh_lookup_skb() doesn't need to test ->neigh_lookup any more. Let's keep a WARN condition though, to document the precondition and to ease detection of such problems in the future. Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/f8c2784c13faa54469a2aac339470b1049ca6b63.1604102750.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03vfio/pci: Bypass IGD init in case of -ENODEVFred Gao
Bypass the IGD initialization when -ENODEV returns, that should be the case if opregion is not available for IGD or within discrete graphics device's option ROM, or host/lpc bridge is not found. Then use of -ENODEV here means no special device resources found which needs special care for VFIO, but we still allow other normal device resource access. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Xiong Zhang <xiong.y.zhang@intel.com> Cc: Hang Yuan <hang.yuan@linux.intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Fred Gao <fred.gao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-03vfio: platform: fix reference leak in vfio_platform_openZhang Qilong
pm_runtime_get_sync() will increment pm usage counter even it failed. Forgetting to call pm_runtime_put will result in reference leak in vfio_platform_open, so we should fix it. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-03vfio/pci: Implement ioeventfd thread handler for contended memory lockAlex Williamson
The ioeventfd is called under spinlock with interrupts disabled, therefore if the memory lock is contended defer code that might sleep to a thread context. Fixes: bc93b9ae0151 ("vfio-pci: Avoid recursive read-lock usage") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209253#c1 Reported-by: Ian Pilcher <arequipeno@gmail.com> Tested-by: Ian Pilcher <arequipeno@gmail.com> Tested-by: Justin Gatzen <justin.gatzen@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-03vfio/fsl-mc: Make vfio_fsl_mc_irqs_allocate staticDiana Craciun
Fixed compiler warning: drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c:16:5: warning: no previous prototype for function 'vfio_fsl_mc_irqs_allocate' [-Wmissing-prototypes] ^ drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c:16:1: note: declare 'static' if the function is not intended to be used outside of this translation unit int vfio_fsl_mc_irqs_allocate(struct vfio_fsl_mc_device *vdev) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-03vfio/fsl-mc: prevent underflow in vfio_fsl_mc_mmap()Dan Carpenter
My static analsysis tool complains that the "index" can be negative. There are some checks in do_mmap() which try to prevent underflows but I don't know if they are sufficient for this situation. Either way, making "index" unsigned is harmless so let's do it just to be safe. Fixes: 67247289688d ("vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Diana Craciun <diana.craciun@oss.nxp.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-03Merge tag 'docs-5.10-3' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A small number of fixes, plus a build tweak to respect the desire for silence in V=0 builds" * tag 'docs-5.10-3' of git://git.lwn.net/linux: docs: fix automarkup regression on Python 2 documentation: arm: sunxi: add Allwinner H6 documents scripts: kernel-doc: split typedef complex regex scripts: kernel-doc: fix typedef parsing docs: Makefile: honor V=0 for docs building
2020-11-03Merge tag 'x86_seves_for_v5.10_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV-ES fixes from Borislav Petkov: "A couple of changes to the SEV-ES code to perform more stringent hypervisor checks before enabling encryption (Joerg Roedel)" * tag 'x86_seves_for_v5.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Do not support MMIO to/from encrypted memory x86/head/64: Check SEV encryption before switching to kernel page-table x86/boot/compressed/64: Check SEV encryption in 64-bit boot-path x86/boot/compressed/64: Sanity-check CPUID results in the early #VC handler x86/boot/compressed/64: Introduce sev_status
2020-11-03afs: Fix incorrect freeing of the ACL passed to the YFS ACL store opDavid Howells
The cleanup for the yfs_store_opaque_acl2_operation calls the wrong function to destroy the ACL content buffer. It's an afs_acl struct, not a yfs_acl struct - and the free function for latter may pass invalid pointers to kfree(). Fix this by using the afs_acl_put() function. The yfs_acl_put() function is then no longer used and can be removed. general protection fault, probably for non-canonical address 0x7ebde00000000: 0000 [#1] SMP PTI ... RIP: 0010:compound_head+0x0/0x11 ... Call Trace: virt_to_cache+0x8/0x51 kfree+0x5d/0x79 yfs_free_opaque_acl+0x16/0x29 afs_put_operation+0x60/0x114 __vfs_setxattr+0x67/0x72 __vfs_setxattr_noperm+0x66/0xe9 vfs_setxattr+0x67/0xce setxattr+0x14e/0x184 __do_sys_fsetxattr+0x66/0x8f do_syscall_64+0x2d/0x3a entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-03afs: Fix warning due to unadvanced marshalling pointerDavid Howells
When using the afs.yfs.acl xattr to change an AuriStor ACL, a warning can be generated when the request is marshalled because the buffer pointer isn't increased after adding the last element, thereby triggering the check at the end if the ACL wasn't empty. This just causes something like the following warning, but doesn't stop the call from happening successfully: kAFS: YFS.StoreOpaqueACL2: Request buffer underflow (36<108) Fix this simply by increasing the count prior to the check. Fixes: f5e4546347bc ("afs: Implement YFS ACL setting") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-03ALSA: hda/realtek - Enable headphone for ASUS TM420Kailang Yang
ASUS TM420 had depop circuit for headphone. It need to turn on by COEF bit. [ fixed the missing enum definition by tiwai ] Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3d6177d7023b4783bf2793861c577ada@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-03docs: fix automarkup regression on Python 2Jonathan Corbet
It turns out that the Python 2 re module lacks the ASCII flag, so don't try to use it there. Fixes: f66e47f98c1e ("docs: automarkup.py: Fix regexes to solve sphinx 3 warnings") Reported-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-11-03s390/pci: fix hot-plug of PCI function missing busNiklas Schnelle
Under some circumstances in particular with "Reconfigure I/O Path" a zPCI function may first appear in Standby through a PCI event with PEC 0x0302 which initially makes it visible to the zPCI subsystem, Only after that is it configured with a zPCI event with PEC 0x0301. If the zbus is still missing a PCI function zero (devfn == 0) when the PCI event 0x0301 is handled zdev->zbus->bus is still NULL and gets dereferenced in common code. Check for this case and enable but don't scan the zPCI function. This matches what would happen if we immediately got the 0x0301 configuration request or the function was included in CLP List PCI. In all cases the PCI functions with devfn != 0 will be scanned once function 0 appears. Fixes: 3047766bc6ec ("s390/pci: fix enabling a reserved PCI function") Cc: <stable@vger.kernel.org> # 5.8 Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/smp: move rcu_cpu_starting() earlierQian Cai
The call to rcu_cpu_starting() in smp_init_secondary() is not early enough in the CPU-hotplug onlining process, which results in lockdep splats as follows: WARNING: suspicious RCU usage ----------------------------- kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. Call Trace: show_stack+0x158/0x1f0 dump_stack+0x1f2/0x238 __lock_acquire+0x2640/0x4dd0 lock_acquire+0x3a8/0xd08 _raw_spin_lock_irqsave+0xc0/0xf0 clockevents_register_device+0xa8/0x528 init_cpu_timer+0x33e/0x468 smp_init_secondary+0x11a/0x328 smp_start_secondary+0x82/0x88 This is avoided by moving the call to rcu_cpu_starting up near the beginning of the smp_init_secondary() function. Note that the raw_smp_processor_id() is required in order to avoid calling into lockdep before RCU has declared the CPU to be watched for readers. Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/ Signed-off-by: Qian Cai <cai@redhat.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/pkey: fix paes selftest failure with paes and pkey static buildHarald Freudenberger
When both the paes and the pkey kernel module are statically build into the kernel, the paes cipher selftests run before the pkey kernel module is initialized. So a static variable set in the pkey init function and used in the pkey_clr2protkey function is not initialized when the paes cipher's selftests request to call pckmo for transforming a clear key value into a protected key. This patch moves the initial setup of the static variable into the function pck_clr2protkey. So it's possible, to use the function for transforming a clear to a protected key even before the pkey init function has been called and the paes selftests may run successful. Reported-by: Alexander Egorenkov <Alexander.Egorenkov@ibm.com> Cc: <stable@vger.kernel.org> # 4.20 Fixes: f822ad2c2c03 ("s390/pkey: move pckmo subfunction available checks away from module init") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390: update defconfigsHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/vdso: remove unused constantsHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/vdso: remove empty unused fileHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/mm: make pmd/pud_deref() large page awareGerald Schaefer
pmd/pud_deref() assume that they will never operate on large pmd/pud entries, and therefore only use the non-large _xxx_ENTRY_ORIGIN mask. With commit 9ec8fa8dc331b ("s390/vmemmap: extend modify_pagetable() to handle vmemmap"), that assumption is no longer true, at least for pmd_deref(). In theory, we could end up with wrong addresses because some of the non-address bits of a large entry would not be masked out. In practice, this does not (yet) show any impact, because vmemmap_free() is currently never used for s390. Fix pmd/pud_deref() to check for the entry type and use the _xxx_ENTRY_ORIGIN_LARGE mask for large entries. While at it, also move pmd/pud_pfn() around, in order to avoid code duplication, because they do the same thing. Fixes: 9ec8fa8dc331b ("s390/vmemmap: extend modify_pagetable() to handle vmemmap") Cc: <stable@vger.kernel.org> # 5.9 Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/ap: fix ap devices reference countingHarald Freudenberger
With the last rework of the AP bus scan function one get_device() is missing causing the reference counter to be one instance too low. Together with binding/unbinding device drivers to an ap device it may end up in an segfault because the ap device is freed but a device driver still assumes it's pointer to the ap device is valid: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803 Fault in home space mode while using kernel ASCE. Krnl PSW : 0404e00180000000 000000001472f3b6 (klist_next+0x7e/0x180) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Call Trace: [<000000001472f3b6>] klist_next+0x7e/0x180 ([<000000001472f36a>] klist_next+0x32/0x180) [<00000000147c14de>] bus_for_each_dev+0x66/0xb8 [<0000000014aab0d4>] ap_scan_adapter+0xcc/0x6c0 [<0000000014aab74a>] ap_scan_bus+0x82/0x140 [<0000000013f3b654>] process_one_work+0x27c/0x478 [<0000000013f3b8b6>] worker_thread+0x66/0x368 [<0000000013f44e32>] kthread+0x17a/0x1a0 [<0000000014af23e4>] ret_from_fork+0x24/0x2c Kernel panic - not syncing: Fatal exception: panic_on_oops Fixed by adjusting the reference count with get_device() on the right place. Also now the device drivers don't need to adjust the ap device's reference counting any more. This is now done in the ap bus probe and remove functions. Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Fixes: 4f2fcccdb547 ("s390/ap: add card/queue deconfig state") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03arm64: kprobes: Use BRK instead of single-step when executing instructions ↵Jean-Philippe Brucker
out-of-line Commit 36dadef23fcc ("kprobes: Init kprobes in early_initcall") enabled using kprobes from early_initcall. Unfortunately at this point the hardware debug infrastructure is not operational. The OS lock may still be locked, and the hardware watchpoints may have unknown values when kprobe enables debug monitors to single-step instructions. Rather than using hardware single-step, append a BRK instruction after the instruction to be executed out-of-line. Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall") Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20201103134900.337243-1-jean-philippe@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-11-03iommu: Fix a check in iommu_check_bind_data()Dan Carpenter
The "data->flags" variable is a u64 so if one of the high 32 bits is set the original code will allow it, but it should be rejected. The fix is to declare "mask" as a u64 instead of a u32. Fixes: d90573812eea ("iommu/uapi: Handle data and argsz filled by users") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201103101623.GA1127762@mwanda Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-11-03gfs2: Wake up when sd_glock_disposal becomes zeroAlexander Aring
Commit fc0e38dae645 ("GFS2: Fix glock deallocation race") fixed a sd_glock_disposal accounting bug by adding a missing atomic_dec statement, but it failed to wake up sd_glock_wait when that decrement causes sd_glock_disposal to reach zero. As a consequence, gfs2_gl_hash_clear can now run into a 10-minute timeout instead of being woken up. Add the missing wakeup. Fixes: fc0e38dae645 ("GFS2: Fix glock deallocation race") Cc: stable@vger.kernel.org # v2.6.39+ Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-11-03iommu/vt-d: Fix a bug for PDP check in prq_event_threadLiu, Yi L
In prq_event_thread(), the QI_PGRP_PDP is wrongly set by 'req->pasid_present' which should be replaced to 'req->priv_data_present'. Fixes: 5b438f4ba315 ("iommu/vt-d: Support page request in scalable mode") Signed-off-by: Liu, Yi L <yi.l.liu@intel.com> Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1604025444-6954-3-git-send-email-yi.y.sun@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-11-03iommu/vt-d: Fix sid not set issue in intel_svm_bind_gpasid()Liu Yi L
Should get correct sid and set it into sdev. Because we execute 'sdev->sid != req->rid' in the loop of prq_event_thread(). Fixes: eb8d93ea3c1d ("iommu/vt-d: Report page request faults for guest SVA") Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1604025444-6954-2-git-send-email-yi.y.sun@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-11-03iommu/vt-d: Fix kernel NULL pointer dereference in find_domain()Lu Baolu
If calling find_domain() for a device which hasn't been probed by the iommu core, below kernel NULL pointer dereference issue happens. [ 362.736947] BUG: kernel NULL pointer dereference, address: 0000000000000038 [ 362.743953] #PF: supervisor read access in kernel mode [ 362.749115] #PF: error_code(0x0000) - not-present page [ 362.754278] PGD 0 P4D 0 [ 362.756843] Oops: 0000 [#1] SMP NOPTI [ 362.760528] CPU: 0 PID: 844 Comm: cat Not tainted 5.9.0-rc4-intel-next+ #1 [ 362.767428] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3384.A02.1909200816 09/20/2019 [ 362.781109] RIP: 0010:find_domain+0xd/0x40 [ 362.785234] Code: 48 81 fb 60 28 d9 b2 75 de 5b 41 5c 41 5d 5d c3 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 87 e0 02 00 00 55 <48> 8b 40 38 48 89 e5 48 83 f8 fe 0f 94 c1 48 85 ff 0f 94 c2 08 d1 [ 362.804041] RSP: 0018:ffffb09cc1f0bd38 EFLAGS: 00010046 [ 362.809292] RAX: 0000000000000000 RBX: ffff905b98e4fac8 RCX: 0000000000000000 [ 362.816452] RDX: 0000000000000001 RSI: ffff905b98e4fac8 RDI: ffff905b9ccd40d0 [ 362.823617] RBP: ffffb09cc1f0bda0 R08: ffffb09cc1f0bd48 R09: 000000000000000f [ 362.830778] R10: ffffffffb266c080 R11: ffff905b9042602d R12: ffff905b98e4fac8 [ 362.837944] R13: ffffb09cc1f0bd48 R14: ffff905b9ccd40d0 R15: ffff905b98e4fac8 [ 362.845108] FS: 00007f8485460740(0000) GS:ffff905b9fc00000(0000) knlGS:0000000000000000 [ 362.853227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 362.858996] CR2: 0000000000000038 CR3: 00000004627a6003 CR4: 0000000000770ef0 [ 362.866161] PKRU: fffffffc [ 362.868890] Call Trace: [ 362.871363] ? show_device_domain_translation+0x32/0x100 [ 362.876700] ? bind_store+0x110/0x110 [ 362.880387] ? klist_next+0x91/0x120 [ 362.883987] ? domain_translation_struct_show+0x50/0x50 [ 362.889237] bus_for_each_dev+0x79/0xc0 [ 362.893121] domain_translation_struct_show+0x36/0x50 [ 362.898204] seq_read+0x135/0x410 [ 362.901545] ? handle_mm_fault+0xeb8/0x1750 [ 362.905755] full_proxy_read+0x5c/0x90 [ 362.909526] vfs_read+0xa6/0x190 [ 362.912782] ksys_read+0x61/0xe0 [ 362.916037] __x64_sys_read+0x1a/0x20 [ 362.919725] do_syscall_64+0x37/0x80 [ 362.923329] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 362.928405] RIP: 0033:0x7f84855c5e95 Filter out those devices to avoid such error. Fixes: e2726daea583d ("iommu/vt-d: debugfs: Add support to show page table internals") Reported-and-tested-by: Xu Pengfei <pengfei.xu@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org#v5.6+ Link: https://lore.kernel.org/r/20201028070725.24979-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 14:55:02 +0000