summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-04selftests: net: bridge: factor out mcast_packet_testNikolay Aleksandrov
Factor out mcast_packet_test into lib.sh so it can be later extended and reused by MLDv2 tests. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04net: dsa: mt7530: support setting MTUDENG Qingfang
MT7530/7531 has a global RX packet length register, which can be used to set MTU. Supported packet length values are 1522 (1518 if untagged), 1536, 1552, and multiple of 1024 (from 2048 to 15360). Signed-off-by: DENG Qingfang <dqfext@gmail.com> Link: https://lore.kernel.org/r/20201103050618.11419-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04Merge branch 'net-ipa-tell-gsi-the-ipa-version'Jakub Kicinski
Alex Elder says: ==================== net: ipa: tell GSI the IPA version The GSI code that supports IPA avoids having knowledge about the IPA layer it serves. One result of this is that Boolean flags are used during GSI initialization to convey that certain hardware version-dependent special behaviors should be used. A given version of IPA hardware uses a fixed/well-defined version of GSI, so the IPA version really implies the GSI version. If given only the IPA version, the GSI code supporting IPA can use it to implement certain special behaviors required for IPA *or* GSI. This avoids the need to pass and maintain numerous Boolean flags. ==================== Link: https://lore.kernel.org/r/20201102175400.6282-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04net: ipa: eliminate legacy argumentsAlex Elder
We enable a channel doorbell engine only for IPA v3.5.1, and that is now handled directly by gsi_channel_program(). When initially setting up a channel, we want that doorbell engine enabled, and we can request that independent of the IPA version. Doing that makes the "legacy" argument to gsi_channel_setup_one() unnecessary. And with that gone we can get rid of the "legacy" argument to gsi_channel_setup(), and gsi_setup() as well. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04net: ipa: use version in gsi_channel_program()Alex Elder
Use the IPA version in gsi_channel_program() to determine whether we should enable the GSI doorbell engine when requested. This way, callers only say whether or not it should be enabled if needed, regardless of hardware version. Rename the "legacy" argument to gsi_channel_reset(), and have it indicate whether the doorbell engine should be enabled when reprogramming following the reset. Change all callers of gsi_channel_reset() to indicate whether to enable the doorbell engine after reset, independent of hardware version. Rework a little logic in ipa_endpoint_reset() to get rid of the "legacy" variable previously passed to gsi_channel_reset(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04net: ipa: use version in gsi_channel_reset()Alex Elder
A quirk of IPA v3.5.1 requires a channel reset on an RX channel to be performed twice. Use the IPA version in gsi_channel_reset() rather than the passed-in legacy flag to determine that. This is actually a bug fix, because this double reset is supposed to occur independent of whether we're enabling the doorbell engine. Now they will be independent. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04net: ipa: use version in gsi_channel_init()Alex Elder
A quirk of IPA v4.2 requires the AP to allocate the GSI channels that are owned by the modem. Rather than pass a flag argument to gsi_channel_init(), use the IPA version directly in that function to determine whether modem channels need to be allocated. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04net: ipa: record IPA version in GSI structureAlex Elder
Record the IPA version passed to gsi_init() in the GSI structure. This allows that value to be used directly where needed, rather than passing and storing certain flag arguments through the code. In particular, for all but one supported version of IPA, the command channel is programmed to only use an "escape buffer". By storing the IPA version, we can do a simple version check in one location, and avoid storing a flag field in every channel (and passing a flag along while initializing channels to set that field properly). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04net: ipa: expose IPA version to the GSI layerAlex Elder
Although GSI is integral to IPA, it is a separate hardware component and the IPA code supporting it has been structured to avoid explicit dependence on IPA details. An example of this is that gsi_init() is passed a number of Boolean flags to indicate special behaviors, whose values are dependent on the IPA hardware version. Looking ahead, newer hardware versions would require even more such special behaviors. For any given version of IPA hardware (like 3.5.1 or 4.2), the GSI hardware version is fixed (in this case, 1.3 and 2.2, respectively). So the IPA version *implies* the GSI version, and the IPA version can be used as effectively the equivalent of the GSI hardware version. Rather than proliferating new special behavior flags, just provide the IPA version to the GSI layer when it is initialized. The GSI code can then use that directly to determine whether special behaviors are required. The IPA version enumerated type is already isolated to its own header file, so the exposure of this IPA detail is very limited. For now, just change gsi_init() to pass the version rather than the Boolean flags, and set the flag values internal to that function. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04PCI: mvebu: Fix duplicate resource requestsRob Herring
With commit 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated into resources when the host bridge is allocated. The resources are requested as well, but that happens a second time for the mvebu driver in mvebu_pcie_parse_request_resources(). We should only be requesting the additional resources added in mvebu_pcie_parse_request_resources(). These are not added by default because they use custom properties rather than standard DT address translation. Also, the bus ranges was also populated by default, so we can remove it from mvebu_pci_host_probe(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729 Fixes: 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()") Link: https://lore.kernel.org/r/20201023145252.2691779-1-robh@kernel.org Reported-by: vtolkm@googlemail.com Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@armlinux.org.uk>
2020-11-04PCI: dwc: Restore ATU memory resource setup to use last entryRob Herring
Prior to commit 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources"), the DWC driver was setting up the last memory resource rather than the first memory resource. This doesn't matter for most platforms which only have 1 memory resource, but it broke Tegra194 which has a 2nd (prefetchable) memory region that requires an ATU entry. The first region on Tegra194 relies on the default 1:1 pass-thru of outbound transactions and doesn't need an ATU entry. Fixes: 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources") Link: https://lore.kernel.org/r/20201026154852.221483-1-robh@kernel.org Reported-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2020-11-04Merge tag 'linux-can-fixes-for-5.10-20201103' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-03 The first two patches are by Oleksij Rempel and they add a generic can-controller Device Tree yaml binding and convert the text based binding of the flexcan driver to a yaml based binding. Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN core. A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload helper. Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in hard IRQ context in can_get_echo_skb(). Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames in the __can_get_echo_skb() helper. Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in can_create_echo_skb(). Yegor Yefremov contributes 4 patches to enhance the j1939 documentation. Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind() if the netdev is down. Then there are three patches for the newly added CAN_ISOTP protocol. Geert Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds missing RX timeout handling in listen-only mode and Colin Ian King's patch decreases the generated object code by 926 bytes. Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the error path in the probe function. Navid Emamdoost's patch for the xilinx_can driver fixes the error handling in case of failing pm_runtime_get_sync(). There are two patches for the peak_usb driver. Dan Carpenter adds range checking in decode operations and Stephane Grosjean's patch fixes a timestamp wrapping problem. Stephane Grosjean's patch for th peak_canfd driver fixes echo management if loopback is on. The next three patches all target the mcp251xfd driver. The first one is by me and it increased the severity of CRC read error messages. The kernel test robot removes an unneeded semicolon and Tom Rix removes unneeded break in several switch-cases. The last 4 patches are by Joakim Zhang and target the flexcan driver, the first three fix ECC related device specific quirks for the LS1021A, LX2160A and the VF610 SoC. The last patch disable wakeup completely upon driver remove. * tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits) can: flexcan: flexcan_remove(): disable wakeup completely can: flexcan: add ECC initialization for VF610 can: flexcan: add ECC initialization for LX2160A can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A can: mcp251xfd: remove unneeded break can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping can: peak_usb: add range checking in decode operations can: xilinx_can: handle failure cases of pm_runtime_get_sync can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path can: isotp: padlen(): make const array static, makes object smaller can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode can: isotp: Explain PDU in CAN_ISOTP help text can: j1939: j1939_sk_bind(): return failure if netdev is down can: j1939: use backquotes for code samples can: j1939: swap addr and pgn in the send example can: j1939: fix syntax and spelling can: j1939: rename jacd tool ... ==================== Link: https://lore.kernel.org/r/<20201103220636.972106-1-mkl@pengutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04spi: fsl-dspi: fix wrong pointer in suspend/resumeZhao Qiang
Since commit 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path"), this driver causes a "NULL pointer dereference" in dspi_suspend/resume. This is because since this commit, the drivers private data point to "dspi" instead of "ctlr", the codes in suspend and resume func were not modified correspondly. Fixes: 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path") Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201103020546.1822-1-qiang.zhao@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-04ASoC: mchp-spdiftx: Do not set Validity bit(s)Codrin Ciubotariu
The Validity bits (bit 28) must not be set in order to have the samples valid. Some controllers look for this bit and ignore the samples if it is set. Fixes: 06ca24e98e6b ("ASoC: mchp-spdiftx: add driver for S/PDIF TX Controller") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20201104155738.68403-1-codrin.ciubotariu@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-04Merge branch 'master' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== 1) Fix packet receiving of standard IP tunnels when the xfrm_interface module is installed. From Xin Long. 2) Fix a race condition between spi allocating and hash list resizing. From zhuoliang zhang. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04kprobes: Tell lockdep about kprobe nestingSteven Rostedt (VMware)
Since the kprobe handlers have protection that prohibits other handlers from executing in other contexts (like if an NMI comes in while processing a kprobe, and executes the same kprobe, it will get fail with a "busy" return). Lockdep is unaware of this protection. Use lockdep's nesting api to differentiate between locks taken in INT3 context and other context to suppress the false warnings. Link: https://lore.kernel.org/r/20201102160234.fa0ae70915ad9e2b21c08b85@kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-04ALSA: usb-audio: Add implicit feedback quirk for MODXGeoffrey D. Bennett
This patch fixes audio distortion on playback for the Yamaha MODX. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Tested-by: Frank Slotta <frank.slotta@posteo.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201104120705.GA19126@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-04ALSA: usb-audio: add usb vendor id as DSD-capable for Khadas devicesArtem Lapkin
Khadas audio devices ( USB_ID_VENDOR 0x3353 ) have DSD-capable implementations from XMOS need add new usb vendor id for recognition Signed-off-by: Artem Lapkin <art@khadas.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201103103311.5435-1-art@khadas.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-04drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINEAlex Deucher
No need for a separate config option at this point. Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amd/display: Add green_sardine support to DMRoman Li
Display Manager support for green_sardine Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amd/display: Add green_sardine support to DCRoman Li
Display Core support for green_sardine Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: enable vcn support for green_sardine (v2)Thong Thai
Enable Green_Sardine VCN support and VCN firmware loading v2: use apu flags Signed-off-by: Thong Thai <thong.thai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: enable green_sardine_asd.bin loading (v2)Aaron Liu
This patch enable green_sardine_asd.bin loading. v2: use apu flags Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)Prike Liang
Initialize the SDMA IP for green_sardine. v2: use apu flags Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: add gfx support for green_sardine (v2)Prike Liang
Enable the gfx base HW function of green_sardine. v2: use apu flags Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: add soc15 common ip block support for green_sardine (v3)Prike Liang
This patch adds common ip support for green_sardine. v2: use apu flags, squash in CG/PG enablement v3: rebase Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2)Prike Liang
This patch adds green_sardine support for gpu_info firmware and ip block setting. v2: use apu flag Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: add Green_Sardine APU flagAlex Deucher
Will be used for Green_Sardine which is a new APU. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservationsArd Biesheuvel
free_highpages() iterates over the free memblock regions in high memory, and marks each page as available for the memory management system. Until commit cddb5ddf2b76 ("arm, xtensa: simplify initialization of high memory pages") it rounded beginning of each region upwards and end of each region downwards. However, after that commit free_highmem() rounds the beginning and end of each region downwards, and we may end up freeing a page that is memblock_reserve()d, resulting in memory corruption. Restore the original rounding of the region boundaries to avoid freeing reserved pages. Fixes: cddb5ddf2b76 ("arm, xtensa: simplify initialization of high memory pages") Link: https://lore.kernel.org/r/20201029110334.4118-1-ardb@kernel.org/ Link: https://lore.kernel.org/r/20201031094345.6984-1-rppt@kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Co-developed-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
2020-11-03drm/amdgpu: resolved ASD loading issue on siennaJohn Clements
updated fw header v2 parser to set asd fw memory Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.9.x
2020-11-03amdkfd: Check kvmalloc return before memcpyKent Russell
If we can't kvmalloc the pcrat_image, then we shouldn't memcpy Signed-off-by: Kent Russell <kent.russell@amd.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-03drm/amdgpu: update golden setting for sienna_cichlidLikun Gao
Update golden setting for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-11-03amd/amdgpu: Disable VCN DPG mode for PicassoVeerabadhran Gopalakrishnan
Concurrent operation of VCN and JPEG decoder in DPG mode is causing ring timeout due to power state. Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-03net: ipa: restrict special reset to IPA v3.5.1Alex Elder
With IPA v3.5.1, if IPA aggregation is active at the time an underlying GSI channel reset is performed, some special handling is required. There is logic in ipa_endpoint_reset() that arranges for that special handling, but it's done for all hardware versions, not just IPA v3.5.1. Fix the logic to properly restrict the special behavior. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201102173435.5987-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03chelsio/chtls: Utilizing multiple rxq/txq to process requestsVinay Kumar Yadav
patch adds a logic to utilize multiple queues to process requests. The queue selection logic uses a round-robin distribution technique using a counter. Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201102162832.22344-1-vinay.yadav@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03octeontx2-pf: Fix sizeof() mismatchColin Ian King
An incorrect sizeof() is being used, sizeof(u64 *) is not correct, it should be sizeof(*sq->sqb_ptrs). Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201102134601.698436-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03net: dev_ioctl: remove redundant initialization of variable errColin Ian King
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201102121615.695196-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03forcedeth: fix excluded_middle.cocci warningskernel test robot
Condition !A || A && B is equivalent to !A || B. Generated by: scripts/coccinelle/misc/excluded_middle.cocci Fixes: b76f0ea01312 ("coccinelle: misc: add excluded_middle.cocci script") CC: Denis Efremov <efremov@linux.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2011020936100.3077@hadrien Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03net: phy: realtek: Add support for RTL8221B-CG seriesWilly Liu
Realtek single-port 2.5Gbps Ethernet PHYs are list as below: RTL8226-CG: the 1st generation 2.5Gbps single port PHY RTL8226B-CG/RTL8221B-CG: the 2nd generation 2.5Gbps single port PHY RTL8221B-VB-CG: the 3rd generation 2.5Gbps single port PHY RTL8221B-VM-CG: the 2.5Gbps single port PHY with MACsec feature This patch adds the minimal drivers to manage these transceivers. Signed-off-by: Willy Liu <willy.liu@realtek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1604281927-9874-1-git-send-email-willy.liu@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03Merge branch 'fsl-qbman-in_interrupt-cleanup'Jakub Kicinski
Sebastian Andrzej Siewior says: ==================== fsl/qbman: in_interrupt() cleanup. This is the in_interrupt() clean for FSL DPAA framework and the two users. The `napi' parameter has been renamed to `sched_napi', the other parts are same as in the previous post [0]. [0] https://lkml.kernel.org/r/20201027225454.3492351-1-bigeasy@linutronix.de ==================== Link: https://lore.kernel.org/r/20201101232257.3028508-1-bigeasy@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03crypto: caam: Replace in_irq() usage.Sebastian Andrzej Siewior
The driver uses in_irq() + in_serving_softirq() magic to decide if NAPI scheduling is required or packet processing. The usage of in_*() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Use the `sched_napi' argument passed by the callback. It is set true if called from the interrupt handler and NAPI should be scheduled. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Aymen Sghaier <aymen.sghaier@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Li Yang <leoyang.li@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Tested-by: Camelia Groza <camelia.groza@nxp.com>
2020-11-03net: dpaa: Replace in_irq() usage.Sebastian Andrzej Siewior
The driver uses in_irq() + in_serving_softirq() magic to decide if NAPI scheduling is required or packet processing. The usage of in_*() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Use the `sched_napi' argument passed by the callback. It is set true if called from the interrupt handler and NAPI should be scheduled. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Aymen Sghaier <aymen.sghaier@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Li Yang <leoyang.li@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Tested-by: Camelia Groza <camelia.groza@nxp.com>
2020-11-03soc/fsl/qbman: Add an argument to signal if NAPI processing is required.Sebastian Andrzej Siewior
dpaa_eth_napi_schedule() and caam_qi_napi_schedule() schedule NAPI if invoked from: - Hard interrupt context - Any context which is not serving soft interrupts Any context which is not serving soft interrupts includes hard interrupts so the in_irq() check is redundant. caam_qi_napi_schedule() has a comment about this: /* * In case of threaded ISR, for RT kernels in_irq() does not return * appropriate value, so use in_serving_softirq to distinguish between * softirq and irq contexts. */ if (in_irq() || !in_serving_softirq()) This has nothing to do with RT. Even on a non RT kernel force threaded interrupts run obviously in thread context and therefore in_irq() returns false when invoked from the handler. The extension of the in_irq() check with !in_serving_softirq() was there when the drivers were added, but in the out of tree FSL BSP the original condition was in_irq() which got extended due to failures on RT. The usage of in_xxx() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Right he is, the above construct is clearly showing why. The following callchains have been analyzed to end up in dpaa_eth_napi_schedule(): qman_p_poll_dqrr() __poll_portal_fast() fq->cb.dqrr() dpaa_eth_napi_schedule() portal_isr() __poll_portal_fast() fq->cb.dqrr() dpaa_eth_napi_schedule() Both need to schedule NAPI. The crypto part has another code path leading up to this: kill_fq() empty_retired_fq() qman_p_poll_dqrr() __poll_portal_fast() fq->cb.dqrr() dpaa_eth_napi_schedule() kill_fq() is called from task context and ends up scheduling NAPI, but that's pointless and an unintended side effect of the !in_serving_softirq() check. The code path: caam_qi_poll() -> qman_p_poll_dqrr() is invoked from NAPI and I *assume* from crypto's NAPI device and not from qbman's NAPI device. I *guess* it is okay to skip scheduling NAPI (because this is what happens now) but could be changed if it is wrong due to `budget' handling. Add an argument to __poll_portal_fast() which is true if NAPI needs to be scheduled. This requires propagating the value to the caller including `qman_cb_dqrr' typedef which is used by the dpaa and the crypto driver. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Aymen Sghaier <aymen.sghaier@nxp.com> Cc: Herbert XS <herbert@gondor.apana.org.au> Cc: Li Yang <leoyang.li@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Tested-by: Camelia Groza <camelia.groza@nxp.com>
2020-11-03drm/amdgpu/swsmu: remove duplicate call to smu_set_default_dpm_tableAlex Deucher
For kernel 5.10, this function was called twice right next to each other in the same function due to what looks like a mis-merge. Remove one of them. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-03lan743x: fix for potential NULL pointer dereference with bare cardSergej Bauer
This is the 3rd revision of the patch fix for potential null pointer dereference with lan743x card. The simpliest way to reproduce: boot with bare lan743x and issue "ethtool ethN" commant where ethN is the interface with lan743x card. Example: $ sudo ethtool eth7 dmesg: [ 103.510336] BUG: kernel NULL pointer dereference, address: 0000000000000340 ... [ 103.510836] RIP: 0010:phy_ethtool_get_wol+0x5/0x30 [libphy] ... [ 103.511629] Call Trace: [ 103.511666] lan743x_ethtool_get_wol+0x21/0x40 [lan743x] [ 103.511724] dev_ethtool+0x1507/0x29d0 [ 103.511769] ? avc_has_extended_perms+0x17f/0x440 [ 103.511820] ? tomoyo_init_request_info+0x84/0x90 [ 103.511870] ? tomoyo_path_number_perm+0x68/0x1e0 [ 103.511919] ? tty_insert_flip_string_fixed_flag+0x82/0xe0 [ 103.511973] ? inet_ioctl+0x187/0x1d0 [ 103.512016] dev_ioctl+0xb5/0x560 [ 103.512055] sock_do_ioctl+0xa0/0x140 [ 103.512098] sock_ioctl+0x2cb/0x3c0 [ 103.512139] __x64_sys_ioctl+0x84/0xc0 [ 103.512183] do_syscall_64+0x33/0x80 [ 103.512224] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 103.512274] RIP: 0033:0x7f54a9cba427 ... Previous versions can be found at: v1: initial version https://lkml.org/lkml/2020/10/28/921 v2: do not return from lan743x_ethtool_set_wol if netdev->phydev == NULL, just skip the call of phy_ethtool_set_wol() instead. https://lkml.org/lkml/2020/10/31/380 v3: in function lan743x_ethtool_set_wol: use ternary operator instead of if-else sentence (review by Markus Elfring) return -ENETDOWN insted of -EIO (review by Andrew Lunn) Signed-off-by: Sergej Bauer <sbauer@blackbox.su> Link: https://lore.kernel.org/r/20201101223556.16116-1-sbauer@blackbox.su Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03r8169: set IRQF_NO_THREAD if MSI(X) is enabledHeiner Kallweit
We had to remove flag IRQF_NO_THREAD because it conflicts with shared interrupts in case legacy interrupts are used. Following up on the linked discussion set IRQF_NO_THREAD if MSI or MSI-X is used, because both guarantee that interrupt won't be shared. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://www.spinics.net/lists/netdev/msg695341.html Link: https://lore.kernel.org/r/446cf5b8-dddd-197f-cb96-66783141ade4@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03r8169: align number of tx descriptors with vendor driverHeiner Kallweit
Lowest number of tx descriptors used in the vendor drivers is 256 in r8169. r8101/r8168/r8125 use 1024 what seems to be the hw limit. Stay on the safe side and go with 256, same as number of rx descriptors. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/a52a6de4-f792-5038-ae2f-240d3b7860eb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03Merge branch 'mlxsw-spectrum-prepare-for-xm-implementation-lpm-trees'Jakub Kicinski
Ido Schimmel says: ==================== mlxsw: spectrum: Prepare for XM implementation - LPM trees Jiri says: This is a preparation patchset for follow-up support of boards with extended mezzanine (XM), which are going to allow extended (scale-wise) router offload. XM requires a separate set of PRM registers to be used to configure LPM trees. Therefore, this patchset introduces operations that allow different implementations of tree configuration for legacy router offload and the XM router offload. ==================== Link: https://lore.kernel.org/r/20201101134215.713708-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03mlxsw: spectrum_router: Introduce low-level ops and implement them for RALXX ↵Jiri Pirko
regs In preparation for support of XM router implementation which uses different registers to work with trees and FIB entries, introduce a structure to hold low-level ops and implement tree manipulation register ops. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03mlxsw: reg: Add XRALXX RegistersJiri Pirko
Add a couple of registers used to manipulate LPM trees on XM: The XRALTA is used to allocate the XLT LPM trees. The XRALST is used to set and query the structure of an XLT LPM tree. The XRALTB register is used to bind virtual router and protocol to an allocated LPM tree. Since the XM registers are identical to the legacy router registers with a fixed offset, re-use their pack functions. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 11:00:14 +0000