| Age | Commit message (Collapse) | Author |
|---|
|
Simplify the "do we need to keep this locked?" checks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're adding new should_be_locked assertions: it's going to be illegal
to unlock a should_be_locked path when trans->locked is true.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're adding new should_be_locked assertions, also add a comment
explaining why clearing should_be_locked is safe here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Small additional optimization over the previous patch, bringing us
closer to the original behaviour, except when we need to clone to avoid
a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Avoid transaction restarts due to failure to upgrade - we can traverse a
new iterator without a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_path_get_locks, on failure, shouldn't unlock if we're not issuing
a transaction restart: we might drop locks we're not supposed to (if
path->should_be_locked is set).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Small helper to improve locking assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_path_put_nokeep() was intended for paths we wouldn't need to
preserve for a transaction restart - it always frees them right away
when the ref hits 0.
But since paths are shared, freeing unconditionally is a bug, the path
might have been used elsewhere and have should_be_locked set, i.e. we
need to keep it locked until the end of the transaction.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a ruleset which binds to various interface names via netdev-family
chains and flowtables and massage the notifiers by frequently renaming
interfaces to match these names. While doing so:
- Keep an 'nft monitor' running in background to receive the notifications
- Loop over 'nft list ruleset' to exercise ruleset dump codepath
- Have iperf running so the involved chains/flowtables see traffic
If supported, also test interface wildcard support separately by
creating a flowtable with 'wild*' interface spec and quickly add/remove
matching dummy interfaces.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Notify user space if netdev hooks are updated due to netdev add/remove
events. Send minimal notification messages by introducing
NFT_MSG_NEWDEV/DELDEV message types describing a single device only.
Upon NETDEV_CHANGENAME, the callback has no information about the
interface's old name. To provide a clear message to user space, include
the hook's stored interface name in the notification.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
User space may pass non-nul-terminated NFTA_DEVICE_NAME attribute values
to indicate a suffix wildcard.
Expect for multiple devices to match the given prefix in
nft_netdev_hook_alloc() and populate 'ops_list' with them all.
When checking for duplicate hooks, compare the shortest prefix so a
device may never match more than a single hook spec.
Finally respect the stored prefix length when hooking into new devices
from event handlers.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
No point in having err_hook_alloc, just call return directly. Also
rename err_hook_dev - it's not about the hook's device but freeing the
hook itself.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
For the sake of simplicity, treat them like consecutive NETDEV_REGISTER
and NETDEV_UNREGISTER events. If the new name matches a hook spec and
registration fails, escalate the error and keep things as they are.
To avoid unregistering the newly registered hook again during the
following fake NETDEV_UNREGISTER event, leave hooks alone if their
interface spec matches the new name.
Note how this patch also skips for NETDEV_REGISTER if the device is
already registered. This is not yet possible as the new name would have
to match the old one. This will change with wildcard interface specs,
though.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Handling NETDEV_CHANGENAME events has to traverse all chains/flowtables
twice, prepare for this. No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Hook into new devices if their name matches the hook spec.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Put NETDEV_UNREGISTER handling code into a switch, no functional change
intended as the function is only called for that event yet.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Supporting a 1:n relationship between nft_hook and nf_hook_ops is
convenient since a chain's or flowtable's nft_hooks may remain in place
despite matching interfaces disappearing. This stabilizes ruleset dumps
in that regard and opens the possibility to claim newly added interfaces
which match the spec. Also it prepares for wildcard interface specs
since these will potentially match multiple interfaces.
All spots dealing with hook registration are updated to handle a list of
multiple nf_hook_ops, but nft_netdev_hook_alloc() only adds a single
item for now to retain the old behaviour. The only expected functional
change here is how vanishing interfaces are handled: Instead of dropping
the respective nft_hook, only the matching nf_hook_ops are dropped.
To safely remove individual ops from the list in netdev handlers, an
rcu_head is added to struct nf_hook_ops so kfree_rcu() may be used.
There is at least nft_flowtable_find_dev() which may be iterating
through the list at the same time.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The function accesses only the hook's ops field, pass it directly. This
prepares for nft_hooks holding a list of nf_hook_ops in future.
While at it, make use of the function in
__nft_unregister_flowtable_net_hooks() as well.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Facilitate binding and registering of a flowtable hook via a single
function call.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Also a pretty dull wrapper around the hook->ops.dev comparison for now.
Will search the embedded nf_hook_ops list in future. The ugly cast to
eliminate the const qualifier will vanish then, too.
Since this future list will be RCU-protected, also introduce an _rcu()
variant here.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pointless wrappers around kfree() for now, prep work for an embedded
list of nf_hook_ops.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add the minimal relevant info needed for userspace ("nftables monitor
trace") to provide the conntrack view of the packet:
- state (new, related, established)
- direction (original, reply)
- status (e.g., if connection is subject to dnat)
- id (allows to query ctnetlink for remaining conntrack state info)
Example:
trace id a62 inet filter PRE_RAW packet: iif "enp0s3" ether [..]
[..]
trace id a62 inet filter PRE_MANGLE conntrack: ct direction original ct state new ct id 32
trace id a62 inet filter PRE_MANGLE packet: [..]
[..]
trace id a62 inet filter IN conntrack: ct direction original ct state new ct status dnat-done ct id 32
[..]
In this case one can see that while NAT is active, the new connection
isn't subject to a translation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
While nf_conntrack_id() doesn't need any functionaliy from conntrack, it
does reside in nf_conntrack_core.c -- callers add a module
dependency on conntrack.
Followup patch will need to compute the conntrack id from nf_tables_trace.c
to include it in nf_trace messages emitted to userspace via netlink.
I don't want to introduce a module dependency between nf_tables and
conntrack for this.
Since trace is slowpath, the added indirection is ok.
One alternative is to move nf_conntrack_id to the netfilter/core.c,
but I don't see a compelling reason so far.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_dup_skb_recursion is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Move nf_dup_skb_recursion to struct netdev_xmit, provide wrappers.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nft_pcpu_tun_ctx is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a nft_inner_tun_ctx member (original
nft_pcpu_tun_ctx) and a local_lock_t and use local_lock_nested_bh() for
locking. This change adds only lockdep coverage and does not alter the
functional behaviour for !PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_skb_duplicated is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Due to the recursion involved, the simplest change is to make it a
per-task variable.
Move the per-CPU variable nf_skb_duplicated to task_struct and name it
in_nf_duplicate. Add it to the existing bitfield so it doesn't use
additional memory.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When dumping a nft_tunnel with more than one geneve_opt configured the
netlink attribute hierarchy should be as follow:
NFTA_TUNNEL_KEY_OPTS
|
|--NFTA_TUNNEL_KEY_OPTS_GENEVE
| |
| |--NFTA_TUNNEL_KEY_GENEVE_CLASS
| |--NFTA_TUNNEL_KEY_GENEVE_TYPE
| |--NFTA_TUNNEL_KEY_GENEVE_DATA
|
|--NFTA_TUNNEL_KEY_OPTS_GENEVE
| |
| |--NFTA_TUNNEL_KEY_GENEVE_CLASS
| |--NFTA_TUNNEL_KEY_GENEVE_TYPE
| |--NFTA_TUNNEL_KEY_GENEVE_DATA
|
|--NFTA_TUNNEL_KEY_OPTS_GENEVE
...
Otherwise, userspace tools won't be able to fetch the geneve options
configured correctly.
Fixes: 925d844696d9 ("netfilter: nft_tunnel: add support for geneve opts")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Replace the existing VRF test with a more comprehensive one.
It tests following combinations:
- fib type (returns address type, e.g. unicast)
- fib oif (route output interface index
- both with and without 'iif' keyword (changes result, e.g.
'fib daddr type local' will be true when the destination address
is configured on the local machine, but
'fib daddr . iif type local' will only be true when the destination
address is configured on the incoming interface.
Add all types of addresses to test with for both ipv4 and ipv6:
- local address on the incoming interface
- local address on another interface
- local address on another interface thats part of a vrf
- address on another host
The ruleset stores obtained results from 'fib' in nftables sets and
then queries the sets to check that it has the expected results.
Perform one pass while packets are coming in on interface NOT part of
a VRF and then again when it was added and make sure fib returns the
expected routes and address types for the various addresses in the
setup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
fib has two modes:
1. Obtain output device according to source or destination address
2. Obtain the type of the address, e.g. local, unicast, multicast.
'fib daddr type' should return 'local' if the address is configured
in this netns or unicast otherwise.
'fib daddr . iif type' should return 'local' if the address is configured
on the input interface or unicast otherwise, i.e. more restrictive.
However, if the interface is part of a VRF, then 'fib daddr type'
returns unicast even if the address is configured on the incoming
interface.
This is broken for both ipv4 and ipv6.
In the ipv4 case, inet_dev_addr_type must only be used if the
'iif' or 'oif' (strict mode) was requested.
Else inet_addr_type_dev_table() needs to be used and the correct
dev argument must be passed as well so the correct fib (vrf) table
is used.
In the ipv6 case, the bug is similar, without strict mode, dev is NULL
so .flowi6_l3mdev will be set to 0.
Add a new 'nft_fib_l3mdev_master_ifindex_rcu()' helper and use that
to init the .l3mdev structure member.
For ipv6, use it from nft_fib6_flowi_init() which gets called from
both the 'type' and the 'route' mode eval functions.
This provides consistent behaviour for all modes for both ipv4 and ipv6:
If strict matching is requested, the input respectively output device
of the netfilter hooks is used.
Otherwise, use skb->dev to obtain the l3mdev ifindex.
Without this, most type checks in updated nft_fib.sh selftest fail:
FAIL: did not find veth0 . 10.9.9.1 . local in fibtype4
FAIL: did not find veth0 . dead:1::1 . local in fibtype6
FAIL: did not find veth0 . dead:9::1 . local in fibtype6
FAIL: did not find tvrf . 10.0.1.1 . local in fibtype4
FAIL: did not find tvrf . 10.9.9.1 . local in fibtype4
FAIL: did not find tvrf . dead:1::1 . local in fibtype6
FAIL: did not find tvrf . dead:9::1 . local in fibtype6
FAIL: fib expression address types match (iif in vrf)
(fib errounously returns 'unicast' for all of them, even
though all of these addresses are local to the vrf).
Fixes: f6d0cbcf09c5 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Without this header, the build of the new qat_6xxx driver fails when
CONFIG_PCI_IOV is not set:
In file included from drivers/crypto/intel/qat/qat_common/adf_gen6_shared.c:7:
drivers/crypto/intel/qat/qat_common/adf_gen4_pfvf.h: In function 'adf_gen4_init_pf_pfvf_ops':
drivers/crypto/intel/qat/qat_common/adf_gen4_pfvf.h:13:34: error: 'adf_pfvf_comms_disabled' undeclared (first use in this function)
13 | pfvf_ops->enable_comms = adf_pfvf_comms_disabled;
| ^~~~~~~~~~~~~~~~~~~~~~~
Fixes: 17fd7514ae68 ("crypto: qat - add qat_6xxx driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When two crypto algorithm lookups occur at the same time with
different names for the same algorithm, e.g., ctr(aes-generic)
and ctr(aes), they will both be instantiated. However, only one
of them can be registered. The second instantiation will fail
with EEXIST.
Avoid failing the second lookup by making it retry, but only once
because there are tricky names such as gcm_base(ctr(aes),ghash)
that will always fail, despite triggering instantiation and EEXIST.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Fixes: 2825982d9d66 ("[CRYPTO] api: Added event notification")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The driver is for codec es8375 of everest
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250523025502.23214-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add device tree binding documentation for Everest ES8375
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250523025502.23214-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
af_unix: Introduce SO_PASSRIGHTS.
As long as recvmsg() or recvmmsg() is used with cmsg, it is not
possible to avoid receiving file descriptors via SCM_RIGHTS.
This series introduces a new socket option, SO_PASSRIGHTS, to allow
disabling SCM_RIGHTS. The option is enabled by default.
See patch 8 for background/context.
This series is related to [0], but is split into a separate series,
as most of the patches are specific to af_unix.
The v2 of the BPF LSM extension part will be posted later, once
this series is merged into net-next and has landed in bpf-next.
[0]: https://lore.kernel.org/bpf/20250505215802.48449-1-kuniyu@amazon.com/
Changes:
v5:
* Patch 4
* Fix BPF selftest failure (setget_sockopt.c)
v4: https://lore.kernel.org/netdev/20250515224946.6931-1-kuniyu@amazon.com/
* Patch 6
* Group sk->sk_scm_XXX bits by struct
* Patch 9
* Remove errno handling
v3: https://lore.kernel.org/netdev/20250514165226.40410-1-kuniyu@amazon.com/
* Patch 3
* Remove inline in scm.c
* Patch 4 & 5 & 8
* Return -EOPNOTSUPP in getsockopt()
* Patch 5
* Add CONFIG_SECURITY_NETWORK check for SO_PASSSEC
* Patch 6
* Add kdoc for sk_scm_unused
* Update sk_scm_XXX under lock_sock() in setsockopt()
* Patch 7
* Update changelog (recent change -> aed6ecef55d7)
v2: https://lore.kernel.org/netdev/20250510015652.9931-1-kuniyu@amazon.com/
* Added patch 4 & 5 to reuse sk_txrehash for scm_recv() flags
v1: https://lore.kernel.org/netdev/20250508013021.79654-1-kuniyu@amazon.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
scm_rights.c has various patterns of tests to exercise GC.
Let's add cases where SO_PASSRIGHTS is disabled.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As long as recvmsg() or recvmmsg() is used with cmsg, it is not
possible to avoid receiving file descriptors via SCM_RIGHTS.
This behaviour has occasionally been flagged as problematic, as
it can be (ab)used to trigger DoS during close(), for example, by
passing a FUSE-controlled fd or a hung NFS fd.
For instance, as noted on the uAPI Group page [0], an untrusted peer
could send a file descriptor pointing to a hung NFS mount and then
close it. Once the receiver calls recvmsg() with msg_control, the
descriptor is automatically installed, and then the responsibility
for the final close() now falls on the receiver, which may result
in blocking the process for a long time.
Regarding this, systemd calls cmsg_close_all() [1] after each
recvmsg() to close() unwanted file descriptors sent via SCM_RIGHTS.
However, this cannot work around the issue at all, because the final
fput() may still occur on the receiver's side once sendmsg() with
SCM_RIGHTS succeeds. Also, even filtering by LSM at recvmsg() does
not work for the same reason.
Thus, we need a better way to refuse SCM_RIGHTS at sendmsg().
Let's introduce SO_PASSRIGHTS to disable SCM_RIGHTS.
Note that this option is enabled by default for backward
compatibility.
Link: https://uapi-group.org/kernel-features/#disabling-reception-of-scm_rights-for-af_unix-sockets #[0]
Link: https://github.com/systemd/systemd/blob/v257.5/src/basic/fd-util.c#L612-L628 #[1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For SOCK_STREAM embryo sockets, the SO_PASS{CRED,PIDFD,SEC} options
are inherited from the parent listen()ing socket.
Currently, this inheritance happens at accept(), because these
attributes were stored in sk->sk_socket->flags and the struct socket
is not allocated until accept().
This leads to unintentional behaviour.
When a peer sends data to an embryo socket in the accept() queue,
unix_maybe_add_creds() embeds credentials into the skb, even if
neither the peer nor the listener has enabled these options.
If the option is enabled, the embryo socket receives the ancillary
data after accept(). If not, the data is silently discarded.
This conservative approach works for SO_PASS{CRED,PIDFD,SEC}, but
would not for SO_PASSRIGHTS; once an SCM_RIGHTS with a hung file
descriptor was sent, it'd be game over.
To avoid this, we will need to preserve SOCK_PASSRIGHTS even on embryo
sockets.
Commit aed6ecef55d7 ("af_unix: Save listener for embryo socket.")
made it possible to access the parent's flags in sendmsg() via
unix_sk(other)->listener->sk->sk_socket->flags, but this introduces
an unnecessary condition that is irrelevant for most sockets,
accept()ed sockets and clients.
Therefore, we moved SOCK_PASSXXX into struct sock.
Let’s inherit sk->sk_scm_recv_flags at connect() to avoid receiving
SCM_RIGHTS on embryo sockets created from a parent with SO_PASSRIGHTS=0.
Note that the parent socket is locked in connect() so we don't need
READ_ONCE() for sk_scm_recv_flags.
Now, we can remove !other->sk_socket check in unix_maybe_add_creds()
to avoid slow SOCK_PASS{CRED,PIDFD} handling for embryo sockets
created from a parent with SO_PASS{CRED,PIDFD}=0.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As explained in the next patch, SO_PASSRIGHTS would have a problem
if we assigned a corresponding bit to socket->flags, so it must be
managed in struct sock.
Mixing socket->flags and sk->sk_flags for similar options will look
confusing, and sk->sk_flags does not have enough space on 32bit system.
Also, as mentioned in commit 16e572626961 ("af_unix: dont send
SCM_CREDENTIALS by default"), SOCK_PASSCRED and SOCK_PASSPID handling
is known to be slow, and managing the flags in struct socket cannot
avoid that for embryo sockets.
Let's move SOCK_PASS{CRED,PIDFD,SEC} to struct sock.
While at it, other SOCK_XXX flags in net.h are grouped as enum.
Note that assign_bit() was atomic, so the writer side is moved down
after lock_sock() in setsockopt(), but the bit is only read once
in sendmsg() and recvmsg(), so lock_sock() is not needed there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SCM_CREDENTIALS and SCM_SECURITY can be recv()ed by calling
scm_recv() or scm_recv_unix(), and SCM_PIDFD is only used by
scm_recv_unix().
scm_recv() is called from AF_NETLINK and AF_BLUETOOTH.
scm_recv_unix() is literally called from AF_UNIX.
Let's restrict SO_PASSCRED and SO_PASSSEC to such sockets and
SO_PASSPIDFD to AF_UNIX only.
Later, SOCK_PASS{CRED,PIDFD,SEC} will be moved to struct sock
and united with another field.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk->sk_txrehash is only used for TCP.
Let's restrict SO_TXREHASH to TCP to reflect this.
Later, we will make sk_txrehash a part of the union for other
protocol families.
Note that we need to modify BPF selftest not to get/set
SO_TEREHASH for non-TCP sockets.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
scm_recv() has been placed in scm.h since the pre-git era for no
particular reason (I think), which makes the file really fragile.
For example, when you move SOCK_PASSCRED from include/linux/net.h to
enum sock_flags in include/net/sock.h, you will see weird build failure
due to terrible dependency.
To avoid the build failure in the future, let's move scm_recv(_unix())?
and its callees to scm.c.
Note that only scm_recv() needs to be exported for Bluetooth.
scm_send() should be moved to scm.c too, but I'll revisit later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We will move SOCK_PASS{CRED,PIDFD,SEC} from struct socket.flags
to struct sock for better handling with SOCK_PASSRIGHTS.
Then, we don't need to access struct socket in maybe_add_creds().
Let's pass struct sock to maybe_add_creds() and its caller
queue_oob().
While at it, we append the unix_ prefix and fix double spaces
around the pid assignment.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the same checks for SOCK_PASSCRED and SOCK_PASSPIDFD
are scattered across many places.
Let's centralise the bit tests to make the following changes cleaner.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 18c438b228558e05ede7dccf947a6547516fc0c7.
The s390 hmac and sha3 algorithms are failing the test. Revert
the change until they have been fixed.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Link: https://lore.kernel.org/all/623a7fcb-b4cb-48e6-9833-57ad2b32a252@linux.ibm.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ARL requires that the GMA and NPU devices both be in D3Hot in order
for PC10 and S0iX to be achieved in S2idle. The original ARL-H/U addition
to the intel_pmc_core driver attempted to do this by switching them to D3
in the init and resume calls of the intel_pmc_core driver.
The problem is the ARL-H/U have a different NPU device and thus are not
being properly set and thus S0iX does not work properly in ARL-H/U. This
patch creates a new ARL-H specific device id that is correct and also
adds the D3 fixup to the suspend callback. This way if the PCI devies
drop from D3 to D0 after resume they can be corrected for the next
suspend. Thus there is no dropout in S0iX.
Fixes: bd820906ea9d ("platform/x86/intel/pmc: Add Arrow Lake U/H support to intel_pmc_core driver")
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Link: https://lore.kernel.org/r/a61f78be45c13f39e122dcc684b636f4b21e79a0.1747737446.git.todd.e.brandt@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
For historical reasons mips has to override the socket enum values but
the defines are all the same. So simply move the ARCH_HAS_SOCKET_TYPES
scope.
Fixes: a9194f88782a ("coredump: add coredump socket")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
xe_pcode_read() can return back successfully without updating the
variable 'val'. This can cause an arbitrary value to show up in the
sysfs file.
Allow the auto_link_downgrade_status to default to 0 to avoid any
arbitrary value from coming up.
Fixes: 0e414bf7ad01 ("drm/xe: Expose PCIe link downgrade attributes")
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Link: https://lore.kernel.org/r/20250516124355.4872-1-aradhya.bhatia@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a7f87deac2295d11865048bcb9c2de369b52ed93)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Platforms that do not support SLPC are exempted from the GuC PC support.
The GuC PC does not get initialized, and neither do its BOs get created.
This causes a problem because the GuC PC debugfs file is still being
created. Whenever the file is attempted to read, it causes a NULL
pointer dereference on the supposed BO of the GuC PC.
So, make the creation of SLPC debugfs files conditional to when SLPC
features are supported.
Fixes: aaab5404b16f ("drm/xe: Introduce GuC PC debugfs")
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Link: https://lore.kernel.org/r/20250516141902.5614-1-aradhya.bhatia@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 17486cf3df5320752cc67ee8bcb2379d1b9de76c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
dm_op hypercalls might come from userspace and pass memory addresses as
parameters. The memory addresses typically correspond to buffers
allocated in userspace to hold extra hypercall parameters.
On ARM, when CONFIG_ARM64_SW_TTBR0_PAN is enabled, they might not be
accessible by Xen, as a result ioreq hypercalls might fail. See the
existing comment in arch/arm64/xen/hypercall.S regarding privcmd_call
for reference.
For privcmd_call, Linux calls uaccess_ttbr0_enable before issuing the
hypercall thanks to commit 9cf09d68b89a. We need to do the same for
dm_op. This resolves the problem.
Cc: stable@kernel.org
Fixes: 9cf09d68b89a ("arm64: xen: Enable user access before a privcmd hvc call")
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <alpine.DEB.2.22.394.2505121446370.8380@ubuntu-linux-20-04-desktop>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
