| Age | Commit message (Collapse) | Author |
|---|
|
NPAR (Network interface card partitioning)[1] 1.2 adds a transparent
VLAN tag for all packets between the NIC and the switch. Because of
that, RX VLAN acceleration cannot be supported for any additional
host configured VLANs. The driver has to acknowledge that it can
support no RX VLAN acceleration and set the NPAR 1.2 supported flag
when registering with the FW. Otherwise, the FW call will fail and
the driver will abort on these NPAR 1.2 NICs with this error:
bnxt_en 0000:26:00.0 (unnamed net_device) (uninitialized): hwrm req_type 0x1d seq id 0xb error 0x2
[1] https://techdocs.broadcom.com/us/en/storage-and-ethernet-connectivity/ethernet-nic-controllers/bcm957xxx/adapters/introduction/features/network-partitioning-npar.html
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250213011240.1640031-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC can see that the value range for "order" is capped, but this leads
it to consider that it might be negative, leading to a false positive
warning (with GCC 15 with -Warray-bounds -fdiagnostics-details):
../drivers/net/ethernet/mellanox/mlx4/alloc.c:691:47: error: array subscript -1 is below array bounds of 'long unsigned int *[2]' [-Werror=array-bounds=]
691 | i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o);
| ~~~~~~~~~~~^~~
'mlx4_alloc_db_from_pgdir': events 1-2
691 | i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | | | | (2) out of array bounds here
| (1) when the condition is evaluated to true In file included from ../drivers/net/ethernet/mellanox/mlx4/mlx4.h:53,
from ../drivers/net/ethernet/mellanox/mlx4/alloc.c:42:
../include/linux/mlx4/device.h:664:33: note: while referencing 'bits'
664 | unsigned long *bits[2];
| ^~~~
Switch the argument to unsigned int, which removes the compiler needing
to consider negative values.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250210174504.work.075-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
functions
Currently disabled EEE modes are shown as supported in ethtool.
Change this by filtering them out when populating data->supported
in genphy_c45_ethtool_get_eee.
Disabled EEE modes are silently filtered out by genphy_c45_write_eee_adv.
This is planned to be removed, therefore ensure in
genphy_c45_ethtool_set_eee that disabled EEE modes are removed from the
user space provided EEE advertisement. For now keep the current behavior
to do this silently.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/5187c86d-9a5a-482c-974f-cc103ce9738c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If pci_alloc_irq_vectors() can't allocate the minimum number of vectors
then it returns -ENOSPC so there is no need to check for that in the
caller. In fact, because pf->msix.min is an unsigned int, it means that
any negative error codes are type promoted to high positive values and
treated as success. So here, the "return -ENOMEM;" is unreachable code.
Check for negatives instead.
Now that we're only dealing with error codes, it's easier to propagate
the error code from pci_alloc_irq_vectors() instead of hardcoding
-ENOMEM.
Fixes: 79d97b8cf9a8 ("ice: remove splitting MSI-X between features")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/b16e4f01-4c85-46e2-b602-fce529293559@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As all PCS are using the neg_mode parameter rather than the legacy
an_mode, remove the ability to use the legacy an_mode. We remove the
tests in the phylink code, unconditionally passing the PCS neg_mode
parameter to PCS methods, and remove setting the flag from drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tidPn-0040hd-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document the existence of persistent per-NAPI configuration space and
the API that drivers can opt into.
Update stale documentation which suggested that NAPI IDs cannot be
queried from userspace.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20250213191535.38792-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Heiner Kallweit says:
====================
net: phy: clean up phy.h
This series is a starting point to clean up phy.h and remove
definitions which are phylib-internal.
====================
Link: https://patch.msgid.link/d14f8a69-dc21-4ff7-8401-574ffe2f4bc5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Helper phy_is_internal() is just used in two places phylib-internally.
So let's remove it from the API.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/f3f35265-80a9-4ed7-ad78-ae22c21e288b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phy_queue_state_machine() isn't used outside phy.c,
so stop exporting it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/16986d3d-7baf-4b02-a641-e2916d491264@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stop exporting feature arrays which aren't used outside phylib.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/01886672-4880-4ca8-b7b0-94d40f6e0ec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
outside phylib
Certain fixup-related definitions aren't used outside phy_device.c.
So make them private and remove them from phy.h.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/ea6fde13-9183-4c7c-8434-6c0eb64fc72c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Heiner Kallweit says:
====================
net: phy: realtek: improve MMD register access for internal PHY's
The integrated PHYs on chip versions from RTL8168g allow to address
MDIO_MMD_VEND2 registers. All c22 standard registers are mapped to
MDIO_MMD_VEND2 registers. So far the paging mechanism is used to
address PHY registers. Add support for c45 ops to address MDIO_MMD_VEND2
registers directly, w/o the paging.
====================
Link: https://patch.msgid.link/c6a969ef-fd7f-48d6-8c48-4bc548831a8d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MDIO bus provided by r8169 for the internal PHY's now supports
c45 ops for the MDIO_MMD_VEND2 device. So we can switch to standard
MMD ops here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/81416f95-0fac-4225-87b4-828e3738b8ed@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
r8169 provides the MDIO bus for the internal PHY's. It has been extended
with c45 access functions for addressing MDIO_MMD_VEND2 registers.
So we can switch from paged access to directly addressing the
MDIO_MMD_VEND2 registers.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/a5f2333c-dda9-48ad-9801-77049766e632@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The integrated PHYs on chip versions from RTL8168g allow to address
MDIO_MMD_VEND2 registers. All c22 standard registers are mapped to
MDIO_MMD_VEND2 registers. So far the paging mechanism is used to
address PHY registers. Add support for c45 ops to address MDIO_MMD_VEND2
registers directly, w/o the paging.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/d6f97eaa-0f13-468f-89cb-75a41087bc4a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: phylink,xpcs,stmmac: support PCS EEE configuration
This series adds support for phylink managed EEE at the PCS level,
allowing xpcs_config_eee() to be removed. Sadly, we still end up with
a XPCS specific function to configure the clock multiplier.
====================
Link: https://patch.msgid.link/Z6naiPpxfxGr1Ic6@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move xpcs_config_eee() with the other EEE-related functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQd-003w7a-MM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is now no need to pass the mult_fact into xpcs_config_eee(), so
let's remove that argument and use xpcs->eee_mult_fact directly. While
changing the function signature, as we pass true/false for enable, use
"bool" instead of "int" for this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQY-003w7U-IG@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make xpcs_config_eee() private to the XPCS driver, called only from
the phylink pcs_disable_eee() and pcs_enable_eee() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQT-003w7O-Ec@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the explicit calls to xpcs_config_eee() from the stmmac driver,
preferring instead for phylink to manage the EEE configuration at the
PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQO-003w7I-Ap@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert XPCS to use the new pcs_disable_eee() and pcs_enable_eee()
methods. Since stmmac is the only user of xpcs_config_eee(), we can
make this a no-op along with this change.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQJ-003w7C-6v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Arrange for stmmac to call the new xpcs_config_eee_mult_fact() function
to configure the EEE clock multiplying factor. This will allow the
removal of the xpcs_config_eee() calls in the next patch.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQE-003w76-3C@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a function to separate out the EEE clock multiplying factor. This
will be called by the stmmac driver to configure this value.
It would have been better had the driver used the CLK API to retrieve
this clock, get its rate and calculate the appropriate multiplier, but
that door has closed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQ8-003w70-VT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are hooks in the stmmac driver into XPCS to control the EEE
settings when LPI is configured at the MAC. This bypasses the layering.
To allow this to be removed from the stmmac driver, add two new
methods for PCS to inform them when the LPI/EEE enablement state
changes at the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQ3-003w6u-RH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
inet: better inet_sock_set_state() for passive flows
Small series to make inet_sock_set_state() more interesting for
LISTEN -> TCP_SYN_RECV changes : The 4-tuple parts are now correct.
First patch is a cleanup.
====================
Link: https://patch.msgid.link/20250212131328.1514243-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current inet_sock_set_state trace from inet_csk_clone_lock() is missing
many details :
... sock:inet_sock_set_state: family=AF_INET6 protocol=IPPROTO_TCP \
sport=4901 dport=0 \
saddr=127.0.0.6 daddr=0.0.0.0 \
saddrv6=:: daddrv6=:: \
oldstate=TCP_LISTEN newstate=TCP_SYN_RECV
Only the sport gives the listener port, no other parts of the n-tuple are correct.
In this patch, I initialize relevant fields of the new socket before
calling inet_sk_set_state(newsk, TCP_SYN_RECV).
We now have a trace including all the source/destination bits.
... sock:inet_sock_set_state: family=AF_INET6 protocol=IPPROTO_TCP \
sport=4901 dport=47648 \
saddr=127.0.0.6 daddr=127.0.0.6 \
saddrv6=2002:a05:6830:1f85:: daddrv6=2001:4860:f803:65::3 \
oldstate=TCP_LISTEN newstate=TCP_SYN_RECV
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250212131328.1514243-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Return early from inet_csk_clone_lock() if the socket
allocation failed, to reduce the indentation level.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250212131328.1514243-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor clock management in EQoS driver for code reuse and to avoid
redundancy. This way, only minimal changes are required when a new platform
is added.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Swathi K S <swathi.ks@samsung.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213041559.106111-1-swathi.ks@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For GSO packets, skb_cow_head() will reallocate the skb for TSO header
cloned skbs in airoha_dev_xmit(). For this reason, sinfo pointer can be
no more valid. Fix the issue relying on skb_shinfo() macro directly in
airoha_dev_xmit().
The problem exists since
commit 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC")
but it is not a user visible, since we can't currently enable TSO
for DSA user ports since we are missing to initialize net_device
vlan_features field.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250213-airoha-en7581-flowtable-offload-v4-1-b69ca16d74db@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net: add EXPORT_IPV6_MOD()
In this series I am adding EXPORT_IPV6_MOD and EXPORT_IPV6_MOD_GPL()
so that we can replace some EXPORT_SYMBOL() when IPV6 is
not modular.
This is making all the selected symbols internal to core
linux networking.
v1: https://lore.kernel.org/20250210082805.465241-2-edumazet@google.com
====================
Link: https://patch.msgid.link/20250212132418.1524422-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use EXPORT_IPV6_MOD[_GPL]() for symbols that don't need
to be exported unless CONFIG_IPV6=m
udp_table is no longer used from any modules, and does not
need to be exported anyway.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250212132418.1524422-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use EXPORT_IPV6_MOD[_GPL]() for symbols that don't need
to be exported unless CONFIG_IPV6=m
tcp_hashinfo and tcp_openreq_init_rwin() are no longer
used from any module anyway.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250212132418.1524422-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use EXPORT_IPV6_MOD[_GPL]() for symbols that do not need to
to be exported unless CONFIG_IPV6=m
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250212132418.1524422-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have many EXPORT_SYMBOL(x) in networking tree because IPv6
can be built as a module.
CONFIG_IPV6=y is becoming the norm.
Define a EXPORT_IPV6_MOD(x) which only exports x
for modular IPv6.
Same principle applies to EXPORT_IPV6_MOD_GPL()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250212132418.1524422-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for receive timestamps to the Rx hotpath. This support only
works when using the flexible descriptor format, so make sure that we
request this format by default if we have receive timestamp support
available in the PTP capabilities.
In order to report the timestamps to userspace, we need to perform
timestamp extension. The Rx descriptor does actually contain the "40
bit" timestamp. However, upper 32 bits which contain nanoseconds are
conveniently stored separately in the descriptor. We could extract the
32bits and lower 8 bits, then perform a bitwise OR to calculate the
40bit value. This makes no sense, because the timestamp extension
algorithm would simply discard the lower 8 bits anyways.
Thus, implement timestamp extension as iavf_ptp_extend_32b_timestamp(),
and extract and forward only the 32bits of nominal nanoseconds.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add handlers for the .ndo_hwtstamp_get and .ndo_hwtstamp_set ops which
allow userspace to request timestamp enablement for the device. This
support allows standard Linux applications to request the timestamping
desired.
As with other devices that support timestamping all packets, the driver
will upgrade any request for timestamping of a specific type of packet
to HWTSTAMP_FILTER_ALL.
The current configuration is stored, so that it can be retrieved by
calling .ndo_hwtstamp_get
The Tx timestamps are not implemented yet so calling set ops for
Tx path will end with EOPNOTSUPP error code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Rx timestamping introduced in PF driver caused the need of refactoring
the VF driver mechanism to check packet fields.
The function to check errors in descriptor has been removed and from
now only previously set struct fields are being checked. The field DD
(descriptor done) needs to be checked at the very beginning, before
extracting other fields.
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Using VIRTCHNL_VF_OFFLOAD_FLEX_DESC, the iAVF driver is capable of
negotiating to enable the advanced flexible descriptor layout. Add the
flexible NIC layout (RXDID=2) as a member of the Rx descriptor union.
Also add bit position definitions for the status and error indications
that are needed.
The iavf_clean_rx_irq function needs to extract a few fields from the Rx
descriptor, including the size, rx_ptype, and vlan_tag.
Move the extraction to a separate function that decodes the fields into
a structure. This will reduce the burden for handling multiple
descriptor types by keeping the relevant extraction logic in one place.
To support handling an additional descriptor format with minimal code
duplication, refactor Rx checksum handling so that the general logic
is separated from the bit calculations. Introduce an iavf_rx_desc_decoded
structure which holds the relevant bits decoded from the Rx descriptor.
This will enable implementing flexible descriptor handling without
duplicating the general logic twice.
Introduce an iavf_extract_flex_rx_fields, iavf_flex_rx_hash, and
iavf_flex_rx_csum functions which operate on the flexible NIC descriptor
format instead of the legacy 32 byte format. Based on the negotiated
RXDID, select the correct function for processing the Rx descriptors.
With this change, the Rx hot path should be functional when using either
the default legacy 32byte format or when we switch to the flexible NIC
layout.
Modify the Rx hot path to add support for the flexible descriptor
format and add request enabling Rx timestamps for all queues.
As in ice, make sure we bump the checksum level if the hardware detected
a packet type which could have an outer checksum. This is important
because hardware only verifies the inner checksum.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The union iavf_32byte_rx_desc consists of two unnamed structs defined
inside. One of them represents legacy 32 byte descriptor and second the
16 byte descriptor (extended to 32 byte). Each of them consists of
bunch of unions, structs and __le fields that represent specific fields
in descriptor.
This commit changes the representation of iavf_32byte_rx_desc union
to store four __le64 fields (qw0, qw1, qw2, qw3) that represent
quad-words. Those quad-words will be then accessed by calling
leXY_get_bits macros in upcoming commits.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Structs idpf_rx_csum_decoded and idpf_rx_extracted are used both in
idpf and iavf Intel drivers. Change the prefix from idpf_* to libeth_*
and move mentioned structs to libeth's rx.h header file.
Adjust usage in idpf driver.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The Rx timestamps reported by hardware may only have 32 bits of storage
for nanosecond time. These timestamps cannot be directly reported to the
Linux stack, as it expects 64bits of time.
To handle this, the timestamps must be extended using an algorithm that
calculates the corrected 64bit timestamp by comparison between the PHC
time and the timestamp. This algorithm requires the PHC time to be
captured within ~2 seconds of when the timestamp was captured.
Instead of trying to read the PHC time in the Rx hotpath, the algorithm
relies on a cached value that is periodically updated.
Keep this cached time up to date by using the PTP .do_aux_work kthread
function.
The iavf_ptp_do_aux_work will reschedule itself about twice a second,
and will check whether or not the cached PTP time needs to be updated.
If so, it issues a VIRTCHNL_OP_1588_PTP_GET_TIME to request the time
from the PF. The jitter and latency involved with this command aren't
important, because the cached time just needs to be kept up to date
within about ~2 seconds.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement support for reading the PHC time indirectly via the
VIRTCHNL_OP_1588_PTP_GET_TIME operation.
Based on some simple tests with ftrace, the latency of the indirect
clock access appears to be about ~110 microseconds. This is due to the
cost of preparing a message to send over the virtchnl queue.
This is expected, due to the increased jitter caused by sending messages
over virtchnl. It is not easy to control the precise time that the
message is sent by the VF, or the time that the message is responded to
by the PF, or the time that the message sent from the PF is received by
the VF.
For sending the request, note that many PTP related operations will
require sending of VIRTCHNL messages. Instead of adding a separate AQ
flag and storage for each operation, setup a simple queue mechanism for
queuing up virtchnl messages.
Each message will be converted to a iavf_ptp_aq_cmd structure which ends
with a flexible array member. A single AQ flag is added for processing
messages from this queue. In principle this could be extended to handle
arbitrary virtchnl messages. For now it is kept to PTP-specific as the
need is primarily for handling PTP-related commands.
Use this to implement .gettimex64 using the indirect method via the
virtchnl command. The response from the PF is processed and stored into
the cached_phc_time. A wait queue is used to allow the PTP clock gettime
request to sleep until the message is sent from the PF.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add the iavf_ptp.c file and fill it in with a skeleton framework to
allow registering the PTP clock device.
Add implementation of helper functions to check if a PTP capability
is supported and handle change in PTP capabilities.
Enabling virtual clock would be possible, though it would probably
perform poorly due to the lack of direct time access.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a new extended capabilities negotiation to exchange information from
the PF about what PTP capabilities are supported by this VF. This
requires sending a VIRTCHNL_OP_1588_PTP_GET_CAPS message, and waiting
for the response from the PF. Handle this early on during the VF
initialization.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Enable support for VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC, to enable the VF
driver the ability to determine what Rx descriptor formats are
available. This requires sending an additional message during
initialization and reset, the VIRTCHNL_OP_GET_SUPPORTED_RXDIDS. This
operation requests the supported Rx descriptor IDs available from the
PF.
This is treated the same way that VLAN V2 capabilities are handled. Add
a new set of extended capability flags, used to process send and receipt
of the VIRTCHNL_OP_GET_SUPPORTED_RXDIDS message.
This ensures we finish negotiating for the supported descriptor formats
prior to beginning configuration of receive queues.
This change stores the supported format bitmap into the iavf_adapter
structure. Additionally, if VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC is enabled
by the PF, we need to make sure that the Rx queue configuration
specifies the format.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Support for allowing VF to negotiate the descriptor format requires that
the VF specify which descriptor format to use when requesting Rx queues.
The VF is supposed to request the set of supported formats via the new
VIRTCHNL_OP_GET_SUPPORTED_RXDIDS, and then set one of the supported
formats in the rxdid field of the virtchnl_rxq_info structure.
The virtchnl.h header does not provide an enumeration of the format
values. The existing implementations in the PF directly use the values
from the DDP package.
Make the formats explicit by defining an enumeration of the RXDIDs.
Provide an enumeration for the values as well as the bit positions as
returned by the supported_rxdids data from the
VIRTCHNL_OP_GET_SUPPORTED_RXDIDS.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
To support Rx timestamp offload, VIRTCHNL_OP_1588_PTP_CAPS is sent by
the VF to request PTP capability and responded by the PF what capability
is enabled for that VF.
Hardware captures timestamps which contain only 32 bits of nominal
nanoseconds, as opposed to the 64bit timestamps that the stack expects.
To convert 32b to 64b, we need a current PHC time.
VIRTCHNL_OP_1588_PTP_GET_TIME is sent by the VF and responded by the
PF with the current PHC time.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for allowing a VF to enable PTP feature - Rx timestamps
The new capability is gated by VIRTCHNL_VF_CAP_PTP, which must be
set by the VF to request access to the new operations. In addition, the
VIRTCHNL_OP_1588_PTP_CAPS command is used to determine the specific
capabilities available to the VF.
This support includes the following additional capabilities:
* Rx timestamps enabled in the Rx queues (when using flexible advanced
descriptors)
* Read access to PHC time over virtchnl using
VIRTCHNL_OP_1588_PTP_GET_TIME
Extra space is reserved in most structures to allow for future
extension (like set clock, Tx timestamps). Additional opcode numbers
are reserved and space in the virtchnl_ptp_caps structure is
specifically set aside for this.
Additionally, each structure has some space reserved for future
extensions to allow some flexibility.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
|
