summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-06drm/amdgpu: fix a memory protection fault when remove amdgpu deviceDennis Li
ASD and TA share the same firmware in SIENNA_CICHLID and only TA firmware is requested during boot, so only need release TA firmware when remove device. [ 83.877150] general protection fault, probably for non-canonical address 0x1269f97e6ed04095: 0000 [#1] SMP PTI [ 83.888076] CPU: 0 PID: 1312 Comm: modprobe Tainted: G W OE 5.9.0-rc5-deli-amd-vangogh-0.0.6.6-114-gdd99d5669a96-dirty #2 [ 83.901160] Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018 [ 83.912353] RIP: 0010:free_fw_priv+0xc/0x120 [ 83.917531] Code: e8 99 cd b0 ff b8 a1 ff ff ff eb 9f 4c 89 f7 e8 8a cd b0 ff b8 f4 ff ff ff eb 90 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <4c> 8b 67 18 48 89 fb 4c 89 e7 e8 45 94 41 00 b8 ff ff ff ff f0 0f [ 83.937576] RSP: 0018:ffffbc34c13a3ce0 EFLAGS: 00010206 [ 83.943699] RAX: ffffffffbb681850 RBX: ffffa047f117eb60 RCX: 0000000080800055 [ 83.951879] RDX: ffffbc34c1d5f000 RSI: 0000000080800055 RDI: 1269f97e6ed04095 [ 83.959955] RBP: ffffbc34c13a3cf0 R08: 0000000000000000 R09: 0000000000000001 [ 83.968107] R10: ffffbc34c13a3cc8 R11: 00000000ffffff00 R12: ffffa047d6b23378 [ 83.976166] R13: ffffa047d6b23338 R14: ffffa047d6b240c8 R15: 0000000000000000 [ 83.984295] FS: 00007f74f6712540(0000) GS:ffffa047fbe00000(0000) knlGS:0000000000000000 [ 83.993323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.000056] CR2: 0000556a1cca4e18 CR3: 000000021faa8004 CR4: 00000000003706f0 [ 84.008128] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 84.016155] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 84.024174] Call Trace: [ 84.027514] release_firmware.part.11+0x4b/0x70 [ 84.033017] release_firmware+0x13/0x20 [ 84.037803] psp_sw_fini+0x77/0xb0 [amdgpu] [ 84.042857] amdgpu_device_fini+0x38c/0x5d0 [amdgpu] [ 84.048815] amdgpu_driver_unload_kms+0x43/0x70 [amdgpu] [ 84.055055] drm_dev_unregister+0x73/0xb0 [drm] [ 84.060499] drm_dev_unplug+0x28/0x30 [drm] [ 84.065598] amdgpu_dev_uninit+0x1b/0x40 [amdgpu] [ 84.071223] amdgpu_pci_remove+0x4e/0x70 [amdgpu] [ 84.076835] pci_device_remove+0x3e/0xc0 [ 84.081609] device_release_driver_internal+0xfb/0x1c0 [ 84.087558] driver_detach+0x4d/0xa0 [ 84.092041] bus_remove_driver+0x5f/0xe0 [ 84.096854] driver_unregister+0x2f/0x50 [ 84.101594] pci_unregister_driver+0x22/0xa0 [ 84.106806] amdgpu_exit+0x15/0x2b [amdgpu] Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-06drm/amdgpu: switched to cached noretry setting for vangoghHawking Zhang
global noretry setting is cached to gmc.noretry Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-06drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL pointer issueKevin Wang
fix NULL pointer issue when read sysfs amdgpu_current_backlight_pwm sysfs node. Call Trace: [ 248.273833] BUG: kernel NULL pointer dereference, address: 0000000000000130 [ 248.273930] #PF: supervisor read access in kernel mode [ 248.273993] #PF: error_code(0x0000) - not-present page [ 248.274054] PGD 0 P4D 0 [ 248.274092] Oops: 0000 [#1] SMP PTI [ 248.274138] CPU: 2 PID: 1377 Comm: cat Tainted: G OE 5.9.0-rc5-drm-next-5.9+ #1 [ 248.274233] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 3802 03/15/2018 [ 248.274641] RIP: 0010:dc_link_get_backlight_level+0x5/0x70 [amdgpu] [ 248.274718] Code: 67 ff ff ff 41 b9 03 00 00 00 e9 45 ff ff ff d1 ea e9 55 ff ff ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b 87 30 01 00 00 48 8b 00 48 8b 88 88 03 00 00 48 8d 81 e8 01 [ 248.274919] RSP: 0018:ffffb5ad809b3df0 EFLAGS: 00010203 [ 248.274982] RAX: ffffa0f77d1c0010 RBX: ffffa0f793ae9168 RCX: 0000000000000001 [ 248.275064] RDX: ffffa0f79753db00 RSI: 0000000000000001 RDI: 0000000000000000 [ 248.275145] RBP: ffffb5ad809b3e00 R08: ffffb5ad809b3da0 R09: 0000000000000000 [ 248.275225] R10: ffffb5ad809b3e68 R11: 0000000000000000 R12: ffffa0f793ae9190 [ 248.275306] R13: ffffb5ad809b3ef0 R14: 0000000000000001 R15: ffffa0f793ae9168 [ 248.275388] FS: 00007f5f1ec4d540(0000) GS:ffffa0f79ec80000(0000) knlGS:0000000000000000 [ 248.275480] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 248.275547] CR2: 0000000000000130 CR3: 000000042a03c005 CR4: 00000000003706e0 [ 248.275628] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 248.275708] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 248.275789] Call Trace: [ 248.276124] ? current_backlight_read+0x24/0x40 [amdgpu] [ 248.276194] seq_read+0xc3/0x3f0 [ 248.276240] full_proxy_read+0x5c/0x90 [ 248.276290] vfs_read+0xa7/0x190 [ 248.276334] ksys_read+0xa7/0xe0 [ 248.276379] __x64_sys_read+0x1a/0x20 [ 248.276429] do_syscall_64+0x37/0x80 [ 248.276477] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 248.276538] RIP: 0033:0x7f5f1e75c191 [ 248.276585] Code: fe ff ff 48 8d 3d b7 9d 0a 00 48 83 ec 08 e8 46 4d 02 00 66 0f 1f 44 00 00 48 8d 05 71 07 2e 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53Hw [ 248.276784] RSP: 002b:00007ffcb1fc3f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 248.276872] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5f1e75c191 [ 248.276953] RDX: 0000000000020000 RSI: 00007f5f1ec2b000 RDI: 0000000000000003 [ 248.277034] RBP: 0000000000020000 R08: 00000000ffffffff R09: 0000000000000000 [ 248.277115] R10: 0000000000000022 R11: 0000000000000246 R12: 00007f5f1ec2b000 [ 248.277195] R13: 0000000000000003 R14: 00007f5f1ec2b00f R15: 0000000000020000 [ 248.277279] Modules linked in: amdgpu(OE) iommu_v2 gpu_sched ttm(OE) drm_kms_helper cec drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio intel_rapl_msr intel_rapl_common snd_hda_intel snd_intel_dspcfg x86_pkg_temp_thermal intel_powerclamp snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event mei_hdcp coretemp snd_rawmidi snd_seq kvm_intel kvm snd_seq_device snd_timer irqbypass joydev snd input_leds soundcore crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper rapl intel_cstate mac_hid mei_me serio_raw mei eeepc_wmi wmi_bmof asus_wmi mxm_wmi intel_wmi_thunderbolt acpi_pad sparse_keymap efi_pstore sch_fq_codel parport_pc ppdev lp parport sunrpc ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid e1000e psmouse ahci libahci wmi video [ 248.278211] CR2: 0000000000000130 [ 248.278221] ---[ end trace 1fbe72fe6f91091d ]--- [ 248.357226] RIP: 0010:dc_link_get_backlight_level+0x5/0x70 [amdgpu] [ 248.357272] Code: 67 ff ff ff 41 b9 03 00 00 00 e9 45 ff ff ff d1 ea e9 55 ff ff ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b 87 30 01 00 00 48 8b 00 48 8b 88 88 03 00 00 48 8d 81 e8 01 Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-06drm/amd/pm: updated PM to I2C controller port on sienna cichlidJohn Clements
sienna cichlid interfaces with RAS eeprom on I2C controller port 1 Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-06drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCOXiaojian Du
This patch is to improve the fine grain tuning function for RV/RV2/PCO. This patch adds two new commands: "restore" and "commit". This function uses the pp_od_clk_voltage sysfs file to configure the min and max value of gfx clock frequency manually or restore the default value. Command guide: echo "s level value" > pp_od_clk_voltage "s" - set the sclk frequency "level" - 0 or 1, "0" represents the min value, "1" represents the max value "value" - the target value of sclk frequency, it should be limited in the safe range echo "r" > pp_od_clk_voltage "r" - reset the sclk frequency, restore the default value instantly echo "c" > pp_od_clk_voltage "c" - commit the min and max value of sclk frequency to the system only after the commit command, the target values set by "s" command will take effect. Example: 1)change power profile from "auto" to "manual" $ cat power_dpm_force_performance_level auto $ echo "manual" > power_dpm_force_performance_level $ cat power_dpm_force_performance_level manual 2)check the default sclk frequency $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz 3)use "s" -- set command to configure the min and max sclk frequency $ echo "s 0 600" > pp_od_clk_voltage $ echo "s 1 1000" > pp_od_clk_voltage $ echo "c" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 600Mhz 1: 1000Mhz OD_RANGE: SCLK: 200MHz 1400MHz 4)use "r" -- reset command to restore the min or max sclk frequency $ echo "r" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-06drm/amd/pm: correct the sensor value of power for vangoghXiaojian Du
This patch is to correct the sensor value of power for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-06Merge tag 'for-5.11-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes that arrived before the end of the year: - a bunch of fixes related to transaction handle lifetime wrt various operations (umount, remount, qgroup scan, orphan cleanup) - async discard scheduling fixes - fix item size calculation when item keys collide for extend refs (hardlinks) - fix qgroup flushing from running transaction - fix send, wrong file path when there is an inode with a pending rmdir - fix deadlock when cloning inline extent and low on free metadata space" * tag 'for-5.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: run delayed iputs when remounting RO to avoid leaking them btrfs: add assertion for empty list of transactions at late stage of umount btrfs: fix race between RO remount and the cleaner task btrfs: fix transaction leak and crash after cleaning up orphans on RO mount btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan btrfs: merge critical sections of discard lock in workfn btrfs: fix racy access to discard_ctl data btrfs: fix async discard stall btrfs: tests: initialize test inodes location btrfs: send: fix wrong file path when there is an inode with a pending rmdir btrfs: qgroup: don't try to wait flushing if we're already holding a transaction btrfs: correctly calculate item size used when item key collision happens btrfs: fix deadlock when cloning inline extent and low on free metadata space
2021-01-06Merge tag 'icc-5.11-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v5.11 This contains a few fixes for iMX and Qualcomm drivers and also updates my email to my kernel.org address. - qcom: Fix rpmh link failures when compile test is enabled - imx: Add a missing of_node_put after of_device_is_available - imx: Remove a useless test - imx8mq: Use icc_sync_state Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: MAINTAINERS: Update Georgi's email address interconnect: imx8mq: Use icc_sync_state interconnect: imx: Remove a useless test interconnect: imx: Add a missing of_node_put after of_device_is_available interconnect: qcom: fix rpmh link failures
2021-01-06Merge tag 'usb-serial-5.11-rc3' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.11-rc3 Here's a fix for a DMA-from-stack issue in iuu_phoenix and a couple of new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.11-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: iuu_phoenix: fix DMA from stack USB: serial: option: add LongSung M5710 module support USB: serial: option: add Quectel EM160R-GL
2021-01-06staging: ION: remove some references to CONFIG_IONMatthias Maennich
With commit e722a295cf49 ("staging: ion: remove from the tree"), ION and its corresponding config CONFIG_ION is gone. Remove stale references from drivers/staging/media/atomisp/pci and from the recommended Android kernel config. Fixes: e722a295cf49 ("staging: ion: remove from the tree") Cc: Hridya Valsaraju <hridya@google.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-media@vger.kernel.org Cc: devel@driverdev.osuosl.org Signed-off-by: Matthias Maennich <maennich@google.com> Link: https://lore.kernel.org/r/20210106155201.2845319-1-maennich@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-06io_uring: Fix return value from alloc_fixed_file_ref_nodeMatthew Wilcox (Oracle)
alloc_fixed_file_ref_node() currently returns an ERR_PTR on failure. io_sqe_files_unregister() expects it to return NULL and since it can only return -ENOMEM, it makes more sense to change alloc_fixed_file_ref_node() to behave that way. Fixes: 1ffc54220c44 ("io_uring: fix io_sqe_files_unregister() hangs") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-06x86/mtrr: Correct the range check before performing MTRR type lookupsYing-Tsun Huang
In mtrr_type_lookup(), if the input memory address region is not in the MTRR, over 4GB, and not over the top of memory, a write-back attribute is returned. These condition checks are for ensuring the input memory address region is actually mapped to the physical memory. However, if the end address is just aligned with the top of memory, the condition check treats the address is over the top of memory, and write-back attribute is not returned. And this hits in a real use case with NVDIMM: the nd_pmem module tries to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes very low since it is aligned with the top of memory and its memory type is uncached-minus. Move the input end address change to inclusive up into mtrr_type_lookup(), before checking for the top of memory in either mtrr_type_lookup_{variable,fixed}() helpers. [ bp: Massage commit message. ] Fixes: 0cc705f56e40 ("x86/mm/mtrr: Clean up mtrr_type_lookup()") Signed-off-by: Ying-Tsun Huang <ying-tsun.huang@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com
2021-01-06powerpc: Handle .text.{hot,unlikely}.* in linker scriptNathan Chancellor
Commit eff8728fe698 ("vmlinux.lds.h: Add PGO and AutoFDO input sections") added ".text.unlikely.*" and ".text.hot.*" due to an LLVM change [1]. After another LLVM change [2], these sections are seen in some PowerPC builds, where there is a orphan section warning then build failure: $ make -skj"$(nproc)" \ ARCH=powerpc CROSS_COMPILE=powerpc64le-linux-gnu- LLVM=1 O=out \ distclean powernv_defconfig zImage.epapr ld.lld: warning: kernel/built-in.a(panic.o):(.text.unlikely.) is being placed in '.text.unlikely.' ... ld.lld: warning: address (0xc000000000009314) of section .text is not a multiple of alignment (256) ... ERROR: start_text address is c000000000009400, should be c000000000008000 ERROR: try to enable LD_HEAD_STUB_CATCH config option ERROR: see comments in arch/powerpc/tools/head_check.sh ... Explicitly handle these sections like in the main linker script so there is no more build failure. [1]: https://reviews.llvm.org/D79600 [2]: https://reviews.llvm.org/D92493 Fixes: 83a092cf95f2 ("powerpc: Link warning for orphan sections") Cc: stable@vger.kernel.org Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/1218 Link: https://lore.kernel.org/r/20210104205952.1399409-1-natechancellor@gmail.com
2021-01-06nvme: remove the unused status argument from nvme_trace_bio_completeMax Gurtovoy
The only used argument in this function is the "req". Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvmet-rdma: Fix list_del corruption on queue establishment failureIsrael Rukshin
When a queue is in NVMET_RDMA_Q_CONNECTING state, it may has some requests at rsp_wait_list. In case a disconnect occurs at this state, no one will empty this list and will return the requests to free_rsps list. Normally nvmet_rdma_queue_established() free those requests after moving the queue to NVMET_RDMA_Q_LIVE state, but in this case __nvmet_rdma_queue_disconnect() is called before. The crash happens at nvmet_rdma_free_rsps() when calling list_del(&rsp->free_list), because the request exists only at the wait list. To fix the issue, simply clear rsp_wait_list when destroying the queue. Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme: unexport functions with no external callerMinwoo Im
There are no callers for nvme_reset_ctrl_sync() and nvme_alloc_request_qid() so that we keep the symbols exported. Unexport those functions, mark them static and update the header file respectively. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme: avoid possible double fetch in handling CQELalithambika Krishnakumar
While handling the completion queue, keep a local copy of the command id from the DMA-accessible completion entry. This silences a time-of-check to time-of-use (TOCTOU) warning from KF/x[1], with respect to a Thunderclap[2] vulnerability analysis. The double-read impact appears benign. There may be a theoretical window for @command_id to be used as an adversary-controlled array-index-value for mounting a speculative execution attack, but that mitigation is saved for a potential follow-on. A man-in-the-middle attack on the data payload is out of scope for this analysis and is hopefully mitigated by filesystem integrity mechanisms. [1] https://github.com/intel/kernel-fuzzer-for-xen-project [2] http://thunderclap.io/thunderclap-paper-ndss2019.pdf Signed-off-by: Lalithambika Krishna Kumar <lalithambika.krishnakumar@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-tcp: Fix possible race of io_work and direct sendSagi Grimberg
We may send a request (with or without its data) from two paths: 1. From our I/O context nvme_tcp_io_work which is triggered from: - queue_rq - r2t reception - socket data_ready and write_space callbacks 2. Directly from queue_rq if the send_list is empty (because we want to save the context switch associated with scheduling our io_work). However, given that now we have the send_mutex, we may run into a race condition where none of these contexts will send the pending payload to the controller. Both io_work send path and queue_rq send path opportunistically attempt to acquire the send_mutex however queue_rq only attempts to send a single request, and if io_work context fails to acquire the send_mutex it will complete without rescheduling itself. The race can trigger with the following sequence: 1. queue_rq sends request (no incapsule data) and blocks 2. RX path receives r2t - prepares data PDU to send, adds h2cdata PDU to the send_list and schedules io_work 3. io_work triggers and cannot acquire the send_mutex - because of (1), ends without self rescheduling 4. queue_rq completes the send, and completes ==> no context will send the h2cdata - timeout. Fix this by having queue_rq sending as much as it can from the send_list such that if it still has any left, its because the socket buffer is full and the socket write_space callback will trigger, thus guaranteeing that a context will be scheduled to send the h2cdata PDU. Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") Reported-by: Potnuri Bharat Teja <bharat@chelsio.com> Reported-by: Samuel Jones <sjones@kalrayinc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQNGopal Tiwari
A system with more than one of these SSDs will only have one usable. Hence the kernel fails to detect nvme devices due to duplicate cntlids. [ 6.274554] nvme nvme1: Duplicate cntlid 33 with nvme0, rejecting [ 6.274566] nvme nvme1: Removing after probe failure status: -22 Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue. Signed-off-by: Gopal Tiwari <gtiwari@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-fcloop: Fix sscanf type and list_first_entry_or_null warningsJames Smart
Kernel robot had the following warnings: >> fcloop.c:1506:6: warning: %x in format string (no. 1) requires >> 'unsigned int *' but the argument type is 'signed int *'. >> [invalidScanfArgType_int] >> if (sscanf(buf, "%x:%d:%d", &opcode, &starting, &amount) != 3) >> ^ Resolve by changing opcode from and int to an unsigned int and >> fcloop.c:1632:32: warning: Uninitialized variable: lport [uninitvar] >> ret = __wait_localport_unreg(lport); >> ^ >> fcloop.c:1615:28: warning: Uninitialized variable: nport [uninitvar] >> ret = __remoteport_unreg(nport, rport); >> ^ These aren't actual issues as the values are assigned prior to use. It appears the tool doesn't understand list_first_entry_or_null(). Regardless, quiet the tool by initializing the pointers to NULL at declaration. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt contextJames Smart
Recent patches changed calling sequences. nvme_fc_abort_outstanding_ios used to be called from a timeout or work context. Now it is being called in an io completion context, which can be an interrupt handler. Unfortunately, the abort outstanding ios routine attempts to stop nvme queues and nested routines that may try to sleep, which is in conflict with the interrupt handler. Correct replacing the direct call with a work element scheduling, and the abort outstanding ios routine will be called in the work element. Fixes: 95ced8a2c72d ("nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery") Signed-off-by: James Smart <james.smart@broadcom.com> Reported-by: Daniel Wagner <dwagner@suse.de> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-05tools/resolve_btfids: Warn when having multiple IDs for single typeJiri Olsa
The kernel image can contain multiple types (structs/unions) with the same name. This causes distinct type hierarchies in BTF data and makes resolve_btfids fail with error like: BTFIDS vmlinux FAILED unresolved symbol udp6_sock as reported by Qais Yousef [1]. This change adds warning when multiple types of the same name are detected: BTFIDS vmlinux WARN: multiple IDs found for 'file': 526, 113351 - using 526 WARN: multiple IDs found for 'sk_buff': 2744, 113958 - using 2744 We keep the lower ID for the given type instance and let the build continue. Also changing the 'nr' variable name to 'nr_types' to avoid confusion. [1] https://lore.kernel.org/lkml/20201229151352.6hzmjvu3qh6p2qgg@e107158-lin/ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210105234219.970039-1-jolsa@kernel.org
2021-01-05selftests: fix the return value for UDP GRO testPo-Hsu Lin
The udpgro.sh will always return 0 (unless the bpf selftest was not build first) even if there are some failed sub test-cases. Therefore the kselftest framework will report this case is OK. Check and return the exit status of each test to make it easier to spot real failures. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: ethernet: fs_enet: Add missing MODULE_LICENSEMichael Ellerman
Since commit 1d6cd3929360 ("modpost: turn missing MODULE_LICENSE() into error") the ppc32_allmodconfig build fails with: ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-fec.o ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-bitbang.o Add the missing MODULE_LICENSEs to fix the build. Both files include a copyright header indicating they are GPL v2. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: qrtr: fix null-ptr-deref in qrtr_ns_removeQinglang Miao
A null-ptr-deref bug is reported by Hulk Robot like this: -------------- KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f] Call Trace: qrtr_ns_remove+0x22/0x40 [ns] qrtr_proto_fini+0xa/0x31 [qrtr] __x64_sys_delete_module+0x337/0x4e0 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x468ded -------------- When qrtr_ns_init fails in qrtr_proto_init, qrtr_ns_remove which would be called later on would raise a null-ptr-deref because qrtr_ns.workqueue has been destroyed. Fix it by making qrtr_ns_init have a return value and adding a check in qrtr_proto_init. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: cdc_ncm: correct overhead in delayed_ndp_sizeJouni K. Seppänen
Aligning to tx_ndp_modulus is not sufficient because the next align call can be cdc_ncm_align_tail, which can add up to ctx->tx_modulus + ctx->tx_remainder - 1 bytes. This used to lead to occasional crashes on a Huawei 909s-120 LTE module as follows: - the condition marked /* if there is a remaining skb [...] */ is true so the swaps happen - skb_out is set from ctx->tx_curr_skb - skb_out->len is exactly 0x3f52 - ctx->tx_curr_size is 0x4000 and delayed_ndp_size is 0xac (note that the sum of skb_out->len and delayed_ndp_size is 0x3ffe) - the for loop over n is executed once - the cdc_ncm_align_tail call marked /* align beginning of next frame */ increases skb_out->len to 0x3f56 (the sum is now 0x4002) - the condition marked /* check if we had enough room left [...] */ is false so we break out of the loop - the condition marked /* If requested, put NDP at end of frame. */ is true so the NDP is written into skb_out - now skb_out->len is 0x4002, so padding_count is minus two interpreted as an unsigned number, which is used as the length argument to memset, leading to a crash with various symptoms but usually including > Call Trace: > <IRQ> > cdc_ncm_fill_tx_frame+0x83a/0x970 [cdc_ncm] > cdc_mbim_tx_fixup+0x1d9/0x240 [cdc_mbim] > usbnet_start_xmit+0x5d/0x720 [usbnet] The cdc_ncm_align_tail call first aligns on a ctx->tx_modulus boundary (adding at most ctx->tx_modulus-1 bytes), then adds ctx->tx_remainder bytes. Alternatively, the next alignment call can occur in cdc_ncm_ndp16 or cdc_ncm_ndp32, in which case at most ctx->tx_ndp_modulus-1 bytes are added. A similar problem has occurred before, and the code is nontrivial to reason about, so add a guard before the crashing call. By that time it is too late to prevent any memory corruption (we'll have written past the end of the buffer already) but we can at least try to get a warning written into an on-disk log by avoiding the hard crash caused by padding past the buffer with a huge number of zeros. Signed-off-by: Jouni K. Seppänen <jks@iki.fi> Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209407 Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05Merge branch 'hns3-fixes'David S. Miller
Huazhong Tan says: ==================== net: hns3: fixes for -net There are some bugfixes for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: hns3: fix incorrect handling of sctp6 rss tupleJian Shen
For DEVICE_VERSION_V2, the hardware only supports src-ip, dst-ip and verification-tag for rss tuple set of sctp6 packet. For DEVICE_VERSION_V3, the hardware supports src-port and dst-port as well. Currently, when user queries the sctp6 rss tuples info, some unsupported information will be showed on V2. So add a check for hardware version when initializing and queries sctp6 rss tuple to fix this issue. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: hns3: fix the number of queues actually used by ARQYufeng Mo
HCLGE_MBX_MAX_ARQ_MSG_NUM is used to apply memory for the number of queues used by ARQ(Asynchronous Receive Queue), so the head and tail pointers should also use this macro. Fixes: 07a0556a3a73 ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: hns3: fix a phy loopback fail issueYonglong Liu
When phy driver does not implement the set_loopback interface, phy loopback test will return -EOPNOTSUPP, and the loopback test will fail. So when phy driver does not implement the set_loopback interface, don't do phy loopback test. Fixes: c9765a89d142 ("net: hns3: add phy selftest function") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05docs: net: fix documentation on .ndo_get_statsJakub Kicinski
Fix calling context. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05Merge branch 'stmmac-fixes'David S. Miller
Samuel Holland says: ==================== Fixes for dwmac-sun8i suspend/resume This series fixes issues preventing dwmac-sun8i from working after a suspend/resume cycle. Those issues include the PHY being left powered off, the MAC syscon configuration being reset, and the reference to the reset controller being improperly dropped. They also fix related issues in probe error handling and driver removal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: stmmac: dwmac-sun8i: Balance syscon (de)initializationSamuel Holland
Previously, sun8i_dwmac_set_syscon was called from a chain of functions in several different files: sun8i_dwmac_probe stmmac_dvr_probe stmmac_hw_init stmmac_hwif_init sun8i_dwmac_setup sun8i_dwmac_set_syscon which made the lifetime of the syscon values hard to reason about. Part of the problem is that there is no similar platform driver callback from stmmac_dvr_remove. As a result, the driver unset the syscon value in sun8i_dwmac_exit, but this leaves it uninitialized after a suspend/ resume cycle. It was also unset a second time (outside sun8i_dwmac_exit) in the probe error path. Move the init to the earliest available place in sun8i_dwmac_probe (after stmmac_probe_config_dt, which initializes plat_dat), and the deinit to the corresponding position in the cleanup order. Since priv is not filled in until stmmac_dvr_probe, this requires changing the sun8i_dwmac_set_syscon parameters to priv's two relevant members. Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i") Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: stmmac: dwmac-sun8i: Balance internal PHY powerSamuel Holland
sun8i_dwmac_exit calls sun8i_dwmac_unpower_internal_phy, but sun8i_dwmac_init did not call sun8i_dwmac_power_internal_phy. This caused PHY power to remain off after a suspend/resume cycle. Fix this by recording if PHY power should be restored, and if so, restoring it. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: stmmac: dwmac-sun8i: Balance internal PHY resource referencesSamuel Holland
While stmmac_pltfr_remove calls sun8i_dwmac_exit, the sun8i_dwmac_init and sun8i_dwmac_exit functions are also called by the stmmac_platform suspend/resume callbacks. They may be called many times during the device's lifetime and should not release resources used by the driver. Furthermore, there was no error handling in case registering the MDIO mux failed during probe, and the EPHY clock was never released at all. Fix all of these issues by moving the deinitialization code to a driver removal callback. Also ensure the EPHY is powered down before removal. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: stmmac: dwmac-sun8i: Fix probe error handlingSamuel Holland
stmmac_pltfr_remove does three things in one function, making it inapproprate for unwinding the steps in the probe function. Currently, a failure before the call to stmmac_dvr_probe would leak OF node references due to missing a call to stmmac_remove_config_dt. And an error in stmmac_dvr_probe would cause the driver to attempt to remove a netdevice that was never added. Fix these by reordering the init and splitting out the error handling steps. Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i") Fixes: 40a1dcee2d18 ("net: ethernet: dwmac-sun8i: Use the correct function in exit path") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: vlan: avoid leaks on register_vlan_dev() failuresJakub Kicinski
VLAN checks for NETREG_UNINITIALIZED to distinguish between registration failure and unregistration in progress. Since commit cb626bf566eb ("net-sysfs: Fix reference count leak") registration failure may, however, result in NETREG_UNREGISTERED as well as NETREG_UNINITIALIZED. This fix is similer to cebb69754f37 ("rtnetlink: Fix memory(net_device) leak when ->newlink fails") Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: suggest L2 discards be counted towards rx_droppedJakub Kicinski
From the existing definitions it's unclear which stat to use to report filtering based on L2 dst addr in old broadcast-medium Ethernet. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net/sonic: Fix some resource leaks in error handling pathsChristophe JAILLET
A call to dma_alloc_coherent() is wrapped by sonic_alloc_descriptors(). This is correctly freed in the remove function, but not in the error handling path of the probe function. Fix this by adding the missing dma_free_coherent() call. While at it, rename a label in order to be slightly more informative. Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Chris Zankel <chris@zankel.net> References: commit 10e3cc180e64 ("net/sonic: Fix a resource leak in an error handling path in 'jazz_sonic_probe()'") Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05wan: ds26522: select CONFIG_BITREVERSEArnd Bergmann
Without this, the driver runs into a link failure arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe': slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write': slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table' Fixes: c37d4a0085c5 ("Maxim/driver: Add driver for maxim ds26522") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05misdn: dsp: select CONFIG_BITREVERSEArnd Bergmann
Without this, we run into a link error arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o: in function `dsp_audio_generate_law_tables': (.text+0x30c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o:(.text+0x5e4): more undefined references to `byte_rev_table' follow Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05cfg80211: select CONFIG_CRC32Arnd Bergmann
Without crc32 support, this fails to link: arm-linux-gnueabi-ld: net/wireless/scan.o: in function `cfg80211_scan_6ghz': scan.c:(.text+0x928): undefined reference to `crc32_le' Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05wil6210: select CONFIG_CRC32Arnd Bergmann
Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify': fw.c:(.text+0x74c): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow Fixes: 151a9706503f ("wil6210: firmware download") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05can: kvaser_pciefd: select CONFIG_CRC32Arnd Bergmann
Without crc32, this driver fails to link: arm-linux-gnueabi-ld: drivers/net/can/kvaser_pciefd.o: in function `kvaser_pciefd_probe': kvaser_pciefd.c:(.text+0x2b0): undefined reference to `crc32_be' Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05phy: dp83640: select CONFIG_CRC32Arnd Bergmann
Without crc32, this driver fails to link: arm-linux-gnueabi-ld: drivers/net/phy/dp83640.o: in function `match': dp83640.c:(.text+0x476c): undefined reference to `crc32_le' Fixes: 539e44d26855 ("dp83640: Include hash in timestamp/packet matching") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05qed: select CONFIG_CRC32Arnd Bergmann
Without this, the driver fails to link: lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_grc_dump': qed_debug.c:(.text+0x4068): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_idle_chk_dump': qed_debug.c:(.text+0x51fc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_mcp_trace_dump': qed_debug.c:(.text+0x6000): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_dbg_reg_fifo_dump': qed_debug.c:(.text+0x66cc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o:qed_debug.c:(.text+0x6aa4): more undefined references to `crc32_le' follow Fixes: 7a4b21b7d1f0 ("qed: Add nvram selftest") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull vhost bugfix from Michael Tsirkin: "This fixes configs with vhost vsock behind a viommu" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/vsock: add IOTLB API support
2021-01-05Merge tag 'sound-5.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here is a collection of USB- and HD-audio fixes. Most of them are device-specific quirks while one fix is for a regression due to an incorrect mutex unlock introduced in this merge window" * tag 'sound-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/via: Fix runtime PM for Clevo W35xSS ALSA: usb-audio: Add quirk for RC-505 ALSA: hda/hdmi: Fix incorrect mutex unlock in silent_stream_disable() ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 ALSA: hda/realtek: Add two "Intel Reference board" SSID in the ALC256. ALSA: hda/realtek: Add mute LED quirk for more HP laptops ALSA: hda/conexant: add a new hda codec CX11970 ALSA: usb-audio: Add quirk for BOSS AD-10 ALSA: usb-audio: Fix UBSAN warnings for MIDI jacks ALSA: hda/realtek - Modify Dell platform name ALSA: hda/realtek - Fix speaker volume control on Lenovo C940
2021-01-05include/soc: remove headers for EZChip NPSVineet Gupta
NPS platform has been removed from ARC port and there are no in-tree user of it now . So RIP ! Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-01-05arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARCRandy Dunlap
fs/dax.c uses copy_user_page() but ARC does not provide that interface, resulting in a build error. Provide copy_user_page() in <asm/page.h>. ../fs/dax.c: In function 'copy_cow_page_dax': ../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Dan Williams <dan.j.williams@intel.com> #Acked-by: Vineet Gupta <vgupta@synopsys.com> # v1 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: linux-fsdevel@vger.kernel.org Cc: linux-nvdimm@lists.01.org #Reviewed-by: Ira Weiny <ira.weiny@intel.com> # v2 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 00:51:46 +0000