| Age | Commit message (Collapse) | Author |
|---|
|
Liu introduced a local copy of the last log commit for an inode to make sure we
actually log an inode even if a log commit has already taken place. In order to
make sure we didn't relog the same inode multiple times he set this local copy
to the current trans when we log the inode, because usually we log the inode and
then sync the log. The exception to this is during rename, we will relog an
inode if the name changed and it is already in the log. The problem with this
is then we go to sync the inode, and our check to see if the inode has already
been logged is tripped and we don't sync the log. To fix this we need to _also_
check against the roots last log commit, because it could be less than what is
in our local copy of the log commit. This fixes a bug where we rename a file
into a directory and then fsync the directory and then on remount the directory
is no longer there. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
If you just create a directory and then fsync that directory and then pull the
power plug you will come back up and the directory will not be there. That is
because we won't actually create directories if we've logged files inside of
them since they will be created on replay, but in this check we will set our
logged_trans of our current directory if it happens to be a directory, making us
think it doesn't need to be logged. Fix the logic to only do this to parent
directories. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
So forever we have had this thing to limit the amount of delalloc pages we'll
setup to be written out to 128mb. This is because we have to lock all the pages
in this range, so anything above this gets a bit unweildly, and also without a
limit we'll happily allocate gigantic chunks of disk space. Turns out our check
for this wasn't quite right, we wouldn't actually limit the chunk we wanted to
write out, we'd just stop looking for more space after we went over the limit.
So if you do a giant 20gb dd on my box with lots of ram I could get 2gig
extents. This is fine normally, except when you go to relocate these extents
and we can't find enough space to relocate these moster extents, since we have
to be able to allocate exactly the same sized extent to move it around. So fix
this by actually enforcing the limit. With this patch I'm no longer seeing
giant 1.5gb extents. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
By the current code, if the requested size is very large, and all the extents
in the free space cache are small, we will waste lots of the cpu time to cut
the requested size in half and search the cache again and again until it gets
down to the size the allocator can return. In fact, we can know the max extent
size in the cache after the first search, so we needn't cut the size in half
repeatedly, and just use the max extent size directly. This way can save
lots of cpu time and make the performance grow up when there are only fragments
in the free space cache.
According to my test, if there are only 4KB free space extents in the fs,
and the total size of those extents are 256MB, we can reduce the execute
time of the following test from 5.4s to 1.4s.
dd if=/dev/zero of=<testfile> bs=1MB count=1 oflag=sync
Changelog v2 -> v3:
- fix the problem that we skip the block group with the space which is
less than we need.
Changelog v1 -> v2:
- address the problem that we return a wrong start position when searching
the free space in a bitmap.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
We want to know if there are debugging features compiled in, this may
affect performance. The message is printed before the sanity checks.
(This commit message is a copy of David Sterba's commit message when
he introduced btrfs_print_info()).
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
Instead of removing the current inode from the red black tree
and then add the new one, just use the red black tree replace
operation, which is more efficient.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
If replace was suspended by the umount, replace target device is added
to the fs_devices->alloc_list during a later mount. This is obviously
wrong. ->is_tgtdev_for_dev_replace is supposed to guard against that,
but ->is_tgtdev_for_dev_replace is (and can only ever be) initialized
*after* everything is opened and fs_devices lists are populated. Fix
this by checking the devid instead: for replace targets it's always
equal to BTRFS_DEV_REPLACE_DEVID.
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
If we failed to actually allocate the correct size of the extent to relocate we
will end up in an infinite loop because we won't return an error, we'll just
move on to the next extent. So fix this up by returning an error, and then fix
all the callers to return an error up the stack rather than BUG_ON()'ing.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
Linux 3.11
|
|
Make sure to properly initialize the IIO buffer data structure.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Set the IIO device as the parent for the character device
We need to make sure that the IIO device is not freed while the character device
exists, otherwise the freeing of the IIO device might race against the file open
callback. Do this by setting the character device's parent to the IIO device,
this will cause the character device to grab a reference to the IIO device and
only release it once the character device itself has been removed.
Also move the registration of the character device before the registration of
the IIO device to avoid the (rather theoretical case) that the IIO device is
already freed again before we can add the character device and grab a reference
to the IIO device.
We also need to move the call to cdev_del() from iio_dev_release() to
iio_device_unregister() (where it should have been in the first place anyway) to
avoid a reference cycle. As iio_dev_release() is only called once all reference
are dropped, but the character device holds a reference to the IIO device.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Make sure that the IIO device is not freed while we still have file descriptors
for it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Make sure to stop sampling when the device is removed, otherwise it will
continue to sample forever.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
if device has available_scan_masks set and the buffer is enabled without
any scan_elements enabled, in a NULL pointer is dereferenced in iio_compute_scan_bytes()
[ 18.993713] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 19.002593] pgd = debd4000
[ 19.005432] [00000000] *pgd=9ebc0831, *pte=00000000, *ppte=00000000
[ 19.012329] Internal error: Oops: 17 [#1] PREEMPT ARM
[ 19.017639] Modules linked in:
[ 19.020843] CPU: 0 Not tainted (3.9.11-00036-g75c888a-dirty #207)
[ 19.027587] PC is at _find_first_bit_le+0xc/0x2c
[ 19.032440] LR is at iio_compute_scan_bytes+0x2c/0xf4
[ 19.037719] pc : [<c021dc60>] lr : [<c03198d0>] psr: 200d0013
[ 19.037719] sp : debd9ed0 ip : 00000000 fp : 000802bc
[ 19.049713] r10: 00000000 r9 : 00000000 r8 : deb67250
[ 19.055206] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : deb67000
[ 19.062011] r3 : de96ec00 r2 : 00000000 r1 : 00000004 r0 : 00000000
[ 19.068847] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 19.076324] Control: 10c5387d Table: 9ebd4019 DAC: 00000015
problem is the rollback code in iio_update_buffers(), old_mask may be NULL (e.g. on first
call)
I'm not too confident about the fix; works for me...
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
dev_to_iio_dev() is a false friend
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
dev_to_iio_dev() is a false friend
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
dev_to_iio_dev() is a false friend
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
1) Four fixes for cpufreq regressions introduced by the changes that
removed Device Tree parsing for CPU device nodes from cpufreq
drivers from Sudeep KarkadaNagesha.
2) Two fixes for recent cpufreq regressions introduced by changes
related to the preservation of sysfs attributes over system
suspend/resume cycles from Viresh Kumar.
3) Fix for ACPI-based wakeup signaling in the PCI subsystem that
fails to stop PME polling for devices put into the D3cold power
state from Rafael J Wysocki.
4) Fix for bad interactions between cpufreq and udev on systems
supporting intel_pstate where acpi-cpufreq is available as well
from Yinghai Lu.
* tag 'pm+acpi-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: return EEXIST instead of EBUSY for second registering
PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup
ARM: shmobile: change dev_id to cpu0 while registering cpu clock
ARM: i.MX: change dev_id to cpu0 while registering cpu clock
cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device
cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device
cpufreq: unlock correct rwsem while updating policy->cpu
cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish()
|
|
Pull vhost updates from Michael Tsirkin:
"vhost: minor changes on top of 3.12-rc1
This fixes module loading for vhost-scsi, and tweaks locking in vhost
core a bit. Both of these are not exactly release blockers but it's
early in the cycle so I think it's a good idea to apply them now"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-scsi: whitespace tweak
vhost/scsi: use vmalloc for order-10 allocation
vhost: wake up worker outside spin_lock
|
|
Don't try to dump the index key that distinguishes an object if netfs
data in the cookie the object refers to has been cleared (ie. the
cookie has passed most of the way through
__fscache_relinquish_cookie()).
Since the netfs holds the index key, we can't get at it once the ->def
and ->netfs_data pointers have been cleared - and a NULL pointer
exception will ensue, usually just after a:
CacheFiles: Error: Unexpected object collision
error is reported.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In cachefiles_check_auxdata(), we allocate auxbuf but fail to free it if
we determine there's an error or that the data is stale.
Further, assigning the output of vfs_getxattr() to auxbuf->len gives
problems with checking for errors as auxbuf->len is a u16. We don't
actually need to set auxbuf->len, so keep the length in a variable for
now. We shouldn't need to check the upper limit of the buffer as an
overflow there should be indicated by -ERANGE.
While we're at it, fscache_check_aux() returns an enum value, not an
int, so assign it to an appropriately typed variable rather than to ret.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hongyi Jia <jiayisuse@gmail.com>
cc: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prevent NULL pointer dereference in case when radeon_ring_fini() did it's job.
Reading of r100_cp_ring_info and radeon_ring_gfx debugfs entries will lead to a KP if ring buffer was deallocated, e.g. on failed ring test.
Seen on PA-RISC machine having "radeon: ring test failed (scratch(0x8504)=0xCAFEDEAD)" issue.
v2: agd5f: add some parens around ring->ready check
Signed-off-by: Alex Ivanov <gnidorah@p0n4ik.tk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
CIK uses a different index for 1D DST surfaces compared to SI. Expose
the new index so libdrm_radeon can use it properly for userspace
drivers.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are multiple valid values, not just 0 or 1. Required
to properly support 2D tiling in the userspace drivers.
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The string is encoded from the MSB to the LSB of the register.
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Newer versions of gcc seem to wander off into the weeds
when dealing with variable sizes arrays in structs.
Rather than indexing the arrays, use pointer arithmetic.
Fix up spread spectrum tables.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the user has forced the driver to use the internal GPU gart
rather than AGP on an AGP card, force the buffers to vram
as well.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Cc: stable@vger.kernel.org
|
|
The cmpxchg() function tends not to support 64-bit arguments on 32-bit
architectures. This could be either due to use of unsigned long
arguments (like on ARM) or lack of instruction support (cmpxchgq on
x86). However, these architectures may implement a specific cmpxchg64()
function to provide 64-bit cmpxchg support instead.
Since the lockref code requires a 64-bit cmpxchg and relies on the
architecture selecting ARCH_USE_CMPXCHG_LOCKREF, move to using cmpxchg64
instead of cmpxchg and allow 32-bit architectures to make use of the
lockless lockref implementation.
Cc: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Workaround the SCSI layer's problematic WRITE SAME heuristics by
disabling WRITE SAME in the DM multipath device's queue_limits if an
underlying device disabled it.
The WRITE SAME heuristics, with both the original commit 5db44863b6eb
("[SCSI] sd: Implement support for WRITE SAME") and the updated commit
66c28f971 ("[SCSI] sd: Update WRITE SAME heuristics"), default to enabling
WRITE SAME(10) even without successfully determining it is supported.
After the first failed WRITE SAME the SCSI layer will disable WRITE SAME
for the device (by setting sdkp->device->no_write_same which results in
'max_write_same_sectors' in device's queue_limits to be set to 0).
When a device is stacked ontop of such a SCSI device any changes to that
SCSI device's queue_limits do not automatically propagate up the stack.
As such, a DM multipath device will not have its WRITE SAME support
disabled. This causes the block layer to continue to issue WRITE SAME
requests to the mpath device which causes paths to fail and (if mpath IO
isn't configured to queue when no paths are available) it will result in
actual IO errors to the upper layers.
This fix doesn't help configurations that have additional devices
stacked ontop of the mpath device (e.g. LVM created linear DM devices
ontop). A proper fix that restacks all the queue_limits from the bottom
of the device stack up will need to be explored if SCSI will continue to
use this model of optimistically allowing op codes and then disabling
them after they fail for the first time.
Before this patch:
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121)
device-mapper: multipath: XXX snitm debugging: failing WRITE SAME IO with error=-121
end_request: critical target error, dev dm-6, sector 528
dm-6: WRITE SAME failed. Manually zeroing.
device-mapper: multipath: Failing path 8:112.
end_request: I/O error, dev dm-6, sector 4616
dm-6: WRITE SAME failed. Manually zeroing.
end_request: I/O error, dev dm-6, sector 4616
end_request: I/O error, dev dm-6, sector 5640
end_request: I/O error, dev dm-6, sector 6664
end_request: I/O error, dev dm-6, sector 7688
end_request: I/O error, dev dm-6, sector 524288
Buffer I/O error on device dm-6, logical block 65536
lost page write due to I/O error on dm-6
JBD2: Error -5 detected when updating journal superblock for dm-6-8.
end_request: I/O error, dev dm-6, sector 524296
Aborting journal on device dm-6-8.
end_request: I/O error, dev dm-6, sector 524288
Buffer I/O error on device dm-6, logical block 65536
lost page write due to I/O error on dm-6
JBD2: Error -5 detected when updating journal superblock for dm-6-8.
# cat /sys/block/sdh/queue/write_same_max_bytes
0
# cat /sys/block/dm-6/queue/write_same_max_bytes
33553920
After this patch:
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121)
device-mapper: multipath: XXX snitm debugging: WRITE SAME I/O failed with error=-121
end_request: critical target error, dev dm-6, sector 528
dm-6: WRITE SAME failed. Manually zeroing.
# cat /sys/block/sdh/queue/write_same_max_bytes
0
# cat /sys/block/dm-6/queue/write_same_max_bytes
0
It should be noted that WRITE SAME support wasn't enabled in DM
multipath until v3.10.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org # 3.10+
|
|
LVM2, since version 2.02.96, creates origin with zero size, then loads
the snapshot driver and then loads the origin. Consequently, the
snapshot driver sees the origin size zero and sets the hash size to the
lower bound 64. Such small hash table causes performance degradation.
This patch changes it so that the hash size is determined by the size of
snapshot volume, not minimum of origin and snapshot size. It doesn't
make sense to set the snapshot size significantly larger than the origin
size, so we do not need to take origin size into account when
calculating the hash size.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
|
|
The kernel reports a lockdep warning if a snapshot is invalidated because
it runs out of space.
The lockdep warning was triggered by commit 0976dfc1d0cd80a4e9dfaf87bd87
("workqueue: Catch more locking problems with flush_work()") in v3.5.
The warning is false positive. The real cause for the warning is that
the lockdep engine treats different instances of md->lock as a single
lock.
This patch is a workaround - we use flush_workqueue instead of flush_work.
This code path is not performance sensitive (it is called only on
initialization or invalidation), thus it doesn't matter that we flush the
whole workqueue.
The real fix for the problem would be to teach the lockdep engine to treat
different instances of md->lock as separate locks.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.5+
|
|
* pm-cpufreq:
cpufreq: return EEXIST instead of EBUSY for second registering
ARM: shmobile: change dev_id to cpu0 while registering cpu clock
ARM: i.MX: change dev_id to cpu0 while registering cpu clock
cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device
cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device
cpufreq: unlock correct rwsem while updating policy->cpu
cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish()
|
|
* acpi-pci:
PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull ARM64 fixes from Catalin Marinas:
- Compat register fault reporting fix
- Documentation clarification on tagged pointers
- hwcap widened to 64-bit (user space already reading it as 64-bit)
* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: Widen hwcap to be 64 bit
arm64: Correctly report LR and SP for compat tasks
arm64: documentation: tighten up tagged pointer documentation
arm64: Make do_bad_area() function static
|
|
Patch a003a2 (sched: Consider runnable load average in move_tasks())
sets all top-level cfs_rqs' h_load to rq->avg.load_avg_contrib, which is
always 0. This mistype leads to all tasks having weight 0 when load
balancing in a cpu-cgroup enabled setup. There obviously should be sum
of weights of all runnable tasks there instead. Fix it.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Paul Turner <pjt@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379173186-11944-1-git-send-email-vdavydov@parallels.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
fix_small_imbalance()
In busiest->group_imb case we can come to fix_small_imbalance() with
local->avg_load > busiest->avg_load. This can result in wrong imbalance
fix-up, because there is the following check there where all the
members are unsigned:
if (busiest->avg_load - local->avg_load + scaled_busy_load_per_task >=
(scaled_busy_load_per_task * imbn)) {
env->imbalance = busiest->load_per_task;
return;
}
As a result we can end up constantly bouncing tasks from one cpu to
another if there are pinned tasks.
Fix it by substituting the subtraction with an equivalent addition in
the check.
[ The bug can be caught by running 2*N cpuhogs pinned to two logical cpus
belonging to different cores on an HT-enabled machine with N logical
cpus: just look at se.nr_migrations growth. ]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ef167822e5c5b2d96cf5b0e3e4f4bdff3f0414a2.1379252740.git.vdavydov@parallels.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
calculate_imbalance()
In busiest->group_imb case we can come to calculate_imbalance() with
local->avg_load >= busiest->avg_load >= sds->avg_load. This can result
in imbalance overflow, because it is calculated as follows
env->imbalance = min(
max_pull * busiest->group_power,
(sds->avg_load - local->avg_load) * local->group_power) / SCHED_POWER_SCALE;
As a result we can end up constantly bouncing tasks from one cpu to
another if there are pinned tasks.
Fix this by skipping the assignment and assuming imbalance=0 in case
local->avg_load > sds->avg_load.
[ The bug can be caught by running 2*N cpuhogs pinned to two logical cpus
belonging to different cores on an HT-enabled machine with N logical
cpus: just look at se.nr_migrations growth. ]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/8f596cc6bc0e5e655119dc892c9bfcad26e971f4.1379252740.git.vdavydov@parallels.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Under arm64 elf_hwcap is a 32 bit quantity, but it is stored in
a 64 bit auxiliary ELF field and glibc reads hwcap as 64 bit.
This patch widens elf_hwcap to be 64 bit.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When a task crashes and we print debugging information, ensure that
compat tasks show the actual AArch32 LR and SP registers rather than the
AArch64 ones.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit d50240a5f6ce ("arm64: mm: permit use of tagged pointers at EL0")
added support for tagged pointers in userspace, but the corresponding
update to Documentation/ contained some imprecise statements.
This patch fixes up some minor ambiguities in the text, hopefully making
it more clear about exactly what the kernel expects from user virtual
addresses.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This function is only called from arch/arm64/mm/fault.c.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fix from Matt Flemin:
" * Fix WARNING on i386 by only enabling a workaround for x86-64 since
we've never encountered the bug on i386 - Josh Boyer "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Solve the problems around the broken definition of perf_event_mmap_page::
cap_usr_time and cap_usr_rdpmc fields which used to overlap, partially
fixed by:
860f085b74e9 ("perf: Fix broken union in 'struct perf_event_mmap_page'")
The problem with the fix (merged in v3.12-rc1 and not yet released
officially), noticed by Vince Weaver is that the new behavior is
not detectable by new user-space, and that due to the reuse of the
field names it's easy to mis-compile a binary if old headers are used
on a new kernel or new headers are used on an old kernel.
To solve all that make this change explicit, detectable and self-contained,
by iterating the ABI the following way:
- Always clear bit 0, and rename it to usrpage->cap_bit0, to at least not
confuse old user-space binaries. RDPMC will be marked as unavailable
to old binaries but that's within the ABI, this is a capability bit.
- Rename bit 1 to ->cap_bit0_is_deprecated and always set it to 1, so new
libraries can reliably detect that bit 0 is deprecated and perma-zero
without having to check the kernel version.
- Use bits 2, 3, 4 for the newly defined, correct functionality:
cap_user_rdpmc : 1, /* The RDPMC instruction can be used to read counts */
cap_user_time : 1, /* The time_* fields are used */
cap_user_time_zero : 1, /* The time_zero field is used */
- Rename all the bitfield names in perf_event.h to be different from the
old names, to make sure it's not possible to mis-compile it
accidentally with old assumptions.
The 'size' field can then be used in the future to add new fields and it
will act as a natural ABI version indicator as well.
Also adjust tools/perf/ userspace for the new definitions, noticed by
Adrian Hunter.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Also-Fixed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/n/tip-zr03yxjrpXesOzzupszqglbv@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
uncore_validate_group() can't call smp_processor_id() because it is
in preemptible context. Pass NUMA_NO_NODE to the allocator instead.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379400493-11505-1-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For some mysterious reason the sample_id field of PERF_RECORD_MMAP went AWOL.
Reported-by: Vince Weaver <vince@deater.net>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Check for SIGINT in more loops, allowing tools such as 'perf report' to
react faster to Ctrl+C, from Arnaldo Carvalho de Melo.
* Fix objdump line parsing offset validation in the annotate code,
from Adrian Hunter.
* Fix buildid cache handling of kallsyms with kcore, from Adrian Hunter.
* Fix compile with libelf without get_phdrnum, from Adrian Hunter.
* Sharpen the libaudit dependencies test, refusing to build with older
libraries that doesn't have all the functions used by 'perf trace", fix
from Ingo Molnar.
* Fill in new definitions for madvise()/mmap() flags to fix the build in
older systems, from Ingo Molnar.
* Fix old GCC build error in older systems in the kallsyms parsing code in
trace-event-parse.c, from Ingo Molnar.
* Ignore DWARF declaration tags, allowing, for instance, that the
$ perf probe -L getname
command succeeds in showing the source code for the 'getname' kernel
function, telling in which lines probes can be inserted, fix from
Masami Hiramatsu.
* Fix linux/magic.h related build breakage in some systems, fix from
Vinson Lee.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes for ARM platforms for 3.12. Among them:
- A fix for build breakage in the MTD subsystem for some PXA devices.
David Woodhouse has this patch in his for-next branch but has not
been responding to our requests to send it up so here it is. I
should have amended the commit message to describe the build
failure for CONFIG_OF=n setups, but forgot and now it's down in the
stack of commits.
- Added device-tree for the BeagleBone Black. Turns out people have
been using the older "regualar" bone DT for the newer boards, and
there's risk of damaging hardware that way.
- Misc DT and regular fixes for OMAP.
- Fix to make the ST-Ericsson "snowball" boards boot with
multi_v7_defconfig, and enable one of the ST-E reference boards on
the same config.
- Kconfig cleanup for u300 to hide submenus when the platform isn't
enabled.
- Enable ARM_ATAG_DTB_COMPAT to let firmware override command line
when booting with an appended devicetree on non-DT-enabled firmware
(needed to boot snowball)"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
ARM: multi_v7: add HREFv60 to multi_v7 defconfig
ARM: OMAP2+: mux: fix trivial typo in name
ARM: OMAP4 SMP: Corrected a typo fucntions to functions
ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally
mailbox: remove unnecessary platform_set_drvdata()
ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y
ARM: OMAP: fix return value check in omap_device_build_from_dt()
ARM: OMAP4: Fix clock_get error for GPMC during boot
ARM: sa1100: collie.c: fall back to jedec_probe flash detection
ARM: u300: hide submenus
ARM: dts: igep00x0: Add pinmux configuration for MCBSP2
ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze
ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
mtd: nand: pxa3xx: Remove unneeded ifdef CONFIG_OF
ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT
ARM: ux500: disable outer cache debug
ARM: dts: OMAP5: fix ocp2scp DTS data
ARM: dts: OMAP5: fix reg property size
ARM: dts: am335x-bone*: add DT for BeagleBone Black
ARM: dts: omap3-beagle-xm: fix string error in compatible property
...
|
|
git://people.freedesktop.org/~robclark/linux into drm-fixes
A couple small msm fixes. Plus drop of set_need_resched().
* 'msm-fixes-3.12' of git://people.freedesktop.org/~robclark/linux:
drm/msm: drop unnecessary set_need_resched()
drm/msm: fix potential NULL pointer dereference
drm/msm: workaround for missing irq
drm/msm: return -EBUSY if bo still active
drm/msm: fix return value check in ERR_PTR()
drm/msm: fix cmdstream size check
drm/msm: hangcheck harder
drm/msm: handle read vs write fences
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Just small fixes, and code cleanups.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix return value check in lowlevel_buffer_allocate()
drm/exynos: Fix address space warnings in exynos_drm_fbdev.c
drm/exynos: Fix address space warning in exynos_drm_buf.c
drm/exynos: Remove redundant OF dependency
|
