| Age | Commit message (Collapse) | Author |
|---|
|
clk-cpu.c has numerous style issues reported by checkpatch and easily
identified otherwise. Give it some love and fix those warnings where it
makes sense. Also make stabilization time a named constant to get rid of
the magic number in clk-cpu.c.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240224202053.25313-3-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Document CPU clock management unit compatibles and add corresponding
clock indices. Exynos850 has two CPU clusters (CL0 and CL1), each
containing 4 Cortex-A55 cores. CPU PLLs are generating main CPU clocks
for each cluster, and there are alternate ("switch") clocks that can be
used temporarily while re-configuring the PLL for the new rate. ACLK,
ATCLK, PCLKDBG and PERIPHCLK clocks are driving corresponding buses.
CLK_CLUSTERx_SCLK are actual leaf CPU clocks and should be used to
change CPU rates. Also some CoreSight clocks can be derived from
DBG_USER (debug clock).
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240224202053.25313-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
CMU_PERIC1 is the clock management unit used for the peric1 block which
is used for additional USI, I3C and PWM interfaces/busses. Add support
for muxes, dividers and gates of cmu_peric1, except for
CLK_GOUT_PERIC1_IP which isn't well described in the datasheet and
which downstream also ignores (similar to cmu_peric0).
Two clocks have been marked as CLK_IS_CRITICAL for the following
reason:
* disabling them makes it impossible to access any peric1
registers, (including those two registers).
* disabling gout_peric1_lhm_axi_p_peric1_i_clk sometimes has the
additional effect of making the whole system unresponsive.
One clock marked as CLK_IGNORE_UNUSED needs to be kept on until we have
updated the respective driver for the following reason:
* gout_peric1_gpio_peric1_pclk is required by the pinctrl
configuration. With this clock disabled, reconfiguring the pins
(for USI/I2C, USI/UART) will hang during register access.
Since pinctrl-samsung doesn't support a clock at the moment, we
just keep the kernel from disabling it at boot, until we have an
update for pinctrl-samsung, at which point we'll drop the flag.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-4-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
dt-bindings for Google GS101 clock controllers for v6.9
The Devicetree binding headers for Samsung Exynos and Google GS101 clock
controllers, used by the Samsung clock controller drivers.
|
|
There is an extra empty line here which doesn't exist in any of the
other cmu code blocks in this file.
Drop it to align cmu_top with the rest of the file.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-2-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add dt-schema documentation and clock IDs for the Connectivity
Peripheral 1 (PERIC1) clock management unit.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-3-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
When SPI transfer is being prepared, the spi-s3c64xx driver will call
clk_set_rate() to change the rate of SPI source clock (IPCLK). But IPCLK
is a gate (leaf) clock, so it must propagate the rate change up the
clock tree, so that corresponding DIV clocks can actually change their
divider values. Add CLK_SET_RATE_PARENT flag to corresponding clocks for
all SPI instances in Exynos850 (spi_0, spi_1 and spi_2) to make it
possible. This change involves next clocks:
usi_spi_0:
Clock Block Div range
--------------------------------------------
gout_spi0_ipclk CMU_PERI -
dout_peri_spi0 CMU_PERI /1..32
mout_peri_spi_user CMU_PERI -
dout_peri_ip CMU_TOP /1..16
usi_cmgp0:
Clock Block Div range
--------------------------------------------
gout_cmgp_usi0_ipclk CMU_CMGP -
dout_cmgp_usi0 CMU_CMGP /1..32
mout_cmgp_usi0 CMU_CMGP -
gout_clkcmu_cmgp_bus CMU_APM -
dout_apm_bus CMU_APM /1..8
usi_cmgp1:
Clock Block Div range
--------------------------------------------
gout_cmgp_usi1_ipclk CMU_CMGP -
dout_cmgp_usi1 CMU_CMGP /1..32
mout_cmgp_usi1 CMU_CMGP -
gout_clkcmu_cmgp_bus CMU_APM -
dout_apm_bus CMU_APM /1..8
With input clock of 400 MHz, this scheme provides next IPCLK rate range,
for each SPI block:
SPI0: 781 kHz ... 400 MHz
SPI1/2: 1.6 MHz ... 400 MHz
Accounting for internal /4 divider in SPI blocks, and because the max
SPI frequency is limited at 50 MHz, it gives us next SPI SCK rates:
SPI0: 200 kHz ... 49.9 MHz
SPI1/2: 400 kHz ... 49.9 MHz
Which should cover all possible applications of SPI bus. Of course,
setting SPI frequency to values as low as 500 kHz will also affect the
common bus dividers (dout_apm_bus or dout_peri_ip), which in turn
effectively lowers the rates for all leaf bus clocks derived from those
dividers, like HSI2C and I3C clocks. But at least it gives the board
designer a choice, whether to keep all clocks (SPI/HSI2C/I3C) at high
frequencies, or make all those clocks have lower frequencies. Not
propagating the rate change to those common dividers would limit this
choice to "only high frequencies are allowed for SPI/HSI2C/I3C" option,
making the common dividers useless. This decision follows the "Worse is
better" approach, relying on the users/engineers to know the system
internals when working with such low-level features, instead of trying
to account for all possible use-cases.
Fixes: 7dd05578198b ("clk: samsung: Introduce Exynos850 clock driver")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240125013858.3986-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
This pclk clock is required any time we access the pinctrl registers of
this block.
Since pinctrl-samsung doesn't support a clock at the moment, we just
keep the kernel from disabling it at boot, until we have an update for
pinctrl-samsung to handle this required clock, at which point we'll be
able to drop the flag again.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240130093812.1746512-2-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add Peripheral DMA (PDMA) clocks in CMU_CORE controller:
- PDMA_ACLK: clock for PDMA0 (regular DMA)
- SPDMA_ACLK: clock for PDMA1 (secure DMA)
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240120012948.8836-4-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Fix typo 'inteernal' to 'internal' in 'Documentation/devicetree/
bindings/clock/tesla,fsd-clock.yaml'.
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20231219115834.65720-1-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
CMU_PERIC0 is the clock management unit used for the peric0 block which
is used for USI and I3C. Add support for all cmu_peric0 clocks but
CLK_GOUT_PERIC0_IP (not enough info in the datasheet).
Few clocks are marked as critical because when either of them is
disabled, the system hangs even if their clock parents are enabled.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240122114113.2582612-1-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
dt-bindings for Google GS101 clock controllers for v6.9
The Devicetree binding headers for Samsung Exynos and Google GS101 clock
controllers, used by the Samsung clock controller drivers.
|
|
Add constants for Peripheral DMA (PDMA) clocks in CMU_CORE controller:
- PDMA_ACLK: clock for PDMA0 (regular DMA)
- SPDMA_ACLK: clock for PDMA1 (secure DMA)
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240120012948.8836-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
clock management unit.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119111132.1290455-2-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Update cmu_misc so it is registered early, as it contains
the gate which clocks the Multi Core Timer (MCT). This clock
is required early in boot, otherwise exynos_mct will fail
obtaining the clock.
Note this wasn't previously an issue as exynos_mct wasn't
enabled.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20231222165355.1462740-3-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The cmu_misc clock-names were renamed to just "bus" and "sss" because
naming is local to the module, so cmu_misc is implied. As the bindings
and the device tree have not made a release yet, comply with the
renamed clocks.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240109114908.3623645-4-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
'bus' and 'ip' are sufficient because naming is local to the module.
As the bindings have not made a release yet, rename the cmu_misc
clock-names.
Fixes: 0a910f160638 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240109114908.3623645-2-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Aneesh Kumar:
- Increase default stack size to 32KB for Book3S
Thanks to Michael Ellerman.
* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Increase default stack size to 32KB
|
|
Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.
$ cat test.sh
prog=bcachefs
$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots
while true;do
$prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
sleep 1s
done
$ cat /etc/mongodb.conf
systemLog:
destination: file
logAppend: true
path: /mnt/data/mongod.log
storage:
dbPath: /mnt/data/
lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
which lock already depends on the new lock.
[ 3437.456553]
the existing dependency chain (in reverse order) is:
[ 3437.457054]
-> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507] down_read+0x3e/0x170
[ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206] __x64_sys_ioctl+0x93/0xd0
[ 3437.458498] do_syscall_64+0x42/0xf0
[ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
-> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615] down_read+0x3e/0x170
[ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686] notify_change+0x1f1/0x4a0
[ 3437.461283] do_truncate+0x7f/0xd0
[ 3437.461555] path_openat+0xa57/0xce0
[ 3437.461836] do_filp_open+0xb4/0x160
[ 3437.462116] do_sys_openat2+0x91/0xc0
[ 3437.462402] __x64_sys_openat+0x53/0xa0
[ 3437.462701] do_syscall_64+0x42/0xf0
[ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
-> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843] down_write+0x3b/0xc0
[ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493] vfs_write+0x21b/0x4c0
[ 3437.464653] ksys_write+0x69/0xf0
[ 3437.464839] do_syscall_64+0x42/0xf0
[ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
-> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471] __lock_acquire+0x1455/0x21b0
[ 3437.465656] lock_acquire+0xc6/0x2b0
[ 3437.465822] mnt_want_write+0x46/0x1a0
[ 3437.465996] filename_create+0x62/0x190
[ 3437.466175] user_path_create+0x2d/0x50
[ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617] __x64_sys_ioctl+0x93/0xd0
[ 3437.466791] do_syscall_64+0x42/0xf0
[ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
other info that might help us debug this:
[ 3437.469670] 2 locks held by bcachefs/35533:
other info that might help us debug this:
[ 3437.467507] Chain exists of:
sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48
[ 3437.467979] Possible unsafe locking scenario:
[ 3437.468223] CPU0 CPU1
[ 3437.468405] ---- ----
[ 3437.468585] rlock(&type->s_umount_key#48);
[ 3437.468758] lock(&c->snapshot_create_lock);
[ 3437.469030] lock(&type->s_umount_key#48);
[ 3437.469291] rlock(sb_writers#10);
[ 3437.469434]
*** DEADLOCK ***
[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795] <TASK>
[ 3437.471884] dump_stack_lvl+0x57/0x90
[ 3437.472035] check_noncircular+0x132/0x150
[ 3437.472202] __lock_acquire+0x1455/0x21b0
[ 3437.472369] lock_acquire+0xc6/0x2b0
[ 3437.472518] ? filename_create+0x62/0x190
[ 3437.472683] ? lock_is_held_type+0x97/0x110
[ 3437.472856] mnt_want_write+0x46/0x1a0
[ 3437.473025] ? filename_create+0x62/0x190
[ 3437.473204] filename_create+0x62/0x190
[ 3437.473380] user_path_create+0x2d/0x50
[ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819] ? lock_acquire+0xc6/0x2b0
[ 3437.474002] ? __fget_files+0x2a/0x190
[ 3437.474195] ? __fget_files+0xbc/0x190
[ 3437.474380] ? lock_release+0xc5/0x270
[ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090] __x64_sys_ioctl+0x93/0xd0
[ 3437.475277] do_syscall_64+0x42/0xf0
[ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================
In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.
Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().
Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:
[ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[ 406.830676 ] #PF: supervisor read access in kernel mode
[ 406.831643 ] #PF: error_code(0x0000) - not-present page
[ 406.832487 ] PGD 0 P4D 0
[ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90
[ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 406.835796 ] RIP: 0010:kfree+0x62/0x140
[ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[ 406.841464 ] Call Trace:
[ 406.841583 ] <TASK>
[ 406.841682 ] ? __die+0x1f/0x70
[ 406.841828 ] ? page_fault_oops+0x159/0x470
[ 406.842014 ] ? fixup_exception+0x22/0x310
[ 406.842198 ] ? exc_page_fault+0x1ed/0x200
[ 406.842382 ] ? asm_exc_page_fault+0x22/0x30
[ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs]
[ 406.842842 ] ? kfree+0x62/0x140
[ 406.842988 ] ? kfree+0x104/0x140
[ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs]
[ 406.843390 ] kobject_put+0xb7/0x170
[ 406.843552 ] deactivate_locked_super+0x2f/0xa0
[ 406.843756 ] cleanup_mnt+0xba/0x150
[ 406.843917 ] task_work_run+0x59/0xa0
[ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0
[ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40
[ 406.844510 ] do_syscall_64+0x4e/0xf0
[ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 406.844907 ] RIP: 0033:0x7f0a2664e4fb
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
