| Age | Commit message (Collapse) | Author |
|---|
|
During capture time, the target job may be unavailable (e.g., if it's in
LR mode). However, the associated exec queue will be available
regardless, so add an exec queue param for such cases.
v2:
- Reword commit message (Jonathan)
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114022522.1951351-5-matthew.brost@intel.com
|
|
Add LRC ring start register to LRC snapshot to verify no LRC register
corruption upon hang. This could be possible if the indirect ring state
was mapped to user space or via an internal KMD memory corruption.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114022522.1951351-4-matthew.brost@intel.com
|
|
The ring is currently in LRC BO but this may change going forward.
Include the ring address in the snapshot protecting again any future
changes.
v2:
- s/ring_desc/ring_addr (Jonathan)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114022522.1951351-3-matthew.brost@intel.com
|
|
Add helper to compare ring head and tail to determine if LRC is idle.
v2:
- Fix kernel doc (CI, Zhanjun)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114022522.1951351-2-matthew.brost@intel.com
|
|
During GT reset, GGTT TLB invalidations may fail. This is acceptable
as the reset will clear GGTT caches. Suppress only -ECANCELED other
return codes are still unexpected error.
v2: Add code comment(Matt).
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3389
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241112170123.1236443-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
Use fault injection infrastructure to allow specific functions to
be configured over debugfs for failing during the execution of
xe_vm_create_ioctl() and xe_vm_bind_ioctl(). This allows more
thorough testing from user space by going through code paths for
error handling and unwinding which cannot be reached by simply
injecting errors in IOCTL arguments. This can help increase code
robustness.
v2: Add xe_pt_update_ops_{prepare,run} (Matthew Brost)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113162212.2154103-1-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
Fix the following drm_WARN:
[953.586396] xe 0000:00:02.0: [drm] Missing outer runtime PM protection
...
<4> [953.587090] ? xe_pm_runtime_get_noresume+0x8d/0xa0 [xe]
<4> [953.587208] guc_exec_queue_add_msg+0x28/0x130 [xe]
<4> [953.587319] guc_exec_queue_fini+0x3a/0x40 [xe]
<4> [953.587425] xe_exec_queue_destroy+0xb3/0xf0 [xe]
<4> [953.587515] xe_oa_release+0x9c/0xc0 [xe]
Suggested-by: John Harrison <john.c.harrison@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241109032003.3093811-1-ashutosh.dixit@intel.com
|
|
Move the force_wake_get to the beginning of the function so the gpu
timestamp can be closer to the sampled value for exec queues. This
avoids additional delays waiting for force wake ack which can make the
proportion between cycles/total_cycles fluctuate around the real value.
For a gputop-like application getting 2 samples to calculate the
utilization:
sample 0:
read_exec_queue_timestamp
<<<< (A)
read_gpu_timestamp
sample 1:
read_exec_queue_timestamp
<<<<< (B)
read_gpu_timestamp
In the above case, utilization can be bigger or smaller than it should
be, depending on if (A) or (B) receives additional delay, respectively.
With this a LNL system that was failing on
`xe_drm_fdinfo --r utilization-single-full-load` after ~60 iterations,
get to run to 100 without a failure. This is still not perfect, and it's
easy to introduce errors by just loading the CPU with `stress --cpu
$(nproc)` - the same igt test in this case fails after 2 or 3
iterations. That will be dealt with in the test itself, using a longer
sampling period.
v2: Rename function and add another to get "any engine", preparing for
caching the hwe in future (Umesh / Jonathan)
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108053318.3483678-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When an exec queue is killed it triggers an async process of asking the
GuC to schedule the context out. The timestamp in the context image is
only updated when this process completes. In case a userspace process
kills an exec and tries to read the timestamp, it may not get an updated
runtime.
Add synchronization between the process reading the fdinfo and the exec
queue being killed. After reading all the timestamps, wait on exec
queues in the process of being killed. When that wait is over,
xe_exec_queue_fini() was already called and updated the timestamps.
v2: Do not update pending_removal before validating user args
(Matthew Auld)
v3: Move wait on pending to be done before getting any timestamp
so it's more likely for the gpu and exec queue timestamps to
be closer together
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2667
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108053318.3483678-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Starting from LNL, CCS has moved over to flat CCS model where there is
now dedicated memory reserved for storing compression state. On
platforms like LNL this reserved memory lives inside graphics stolen
memory, which is not treated like normal RAM and is therefore skipped by
the core kernel when creating the hibernation image. Currently if
something was compressed and we enter hibernation all the corresponding
CCS state is lost on such HW, resulting in corrupted memory. To fix this
evict user buffers from TT -> SYSTEM to ensure we take a snapshot of the
raw CCS state when entering hibernation, where upon resuming we can
restore the raw CCS state back when next validating the buffer. This has
been confirmed to fix display corruption on LNL when coming back from
hibernation.
Fixes: cbdc52c11c9b ("drm/xe/xe2: Support flat ccs")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3409
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241112162827.116523-2-matthew.auld@intel.com
|
|
Add support for the two crash dump notifications from GuC. Either one
means GuC is toast, so just capture state trigger a reset.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108212737.2044007-3-John.C.Harrison@Intel.com
|
|
Drop the default verbosity from 5 (max) to 3 as the extra verbosity
generally doesn't provide anything vitally important but does cause
rapid log overflow.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108212737.2044007-2-John.C.Harrison@Intel.com
|
|
If an error occurs in the GSC<->CSME handshake, the GSC will send a
PROXY_END msg to the driver with the status set to an error code. We
currently don't check the status when receiving a PROXY_END message and
instead check the proxy initialization status in the FWSTS reg;
therefore, while still catching any initialization failures, we lose the
actual returned error code. This can be easily improved by checking the
status value and printing it to dmesg if it's an error.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106002402.486700-1-daniele.ceraolospurio@intel.com
|
|
Access to the pending_list should always happens under job_list_lock.
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105160327.2970277-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
During VF post-migration recovery, MMIO communication channel to GuC
is used, despite CTB channel being enabled. This behavior is rooted
in the save-restore architecture specification.
Therefore, a VF driver cannot assert that CTB is disabled while sending
MMIO messages to GuC. Such assertion needs to be PF only, or be removed.
This patch simply removes the assertion.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Suggested-by: Michał Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107151357.1623733-2-tomasz.lis@intel.com
|
|
For better diagnostics, use xe_gt_err() instead of drm_err().
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107194741.2167-3-michal.wajdeczko@intel.com
|
|
For better diagnostics, use xe_gt_assert() instead of xe_assert().
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107194741.2167-2-michal.wajdeczko@intel.com
|
|
The GGTT looks to be stored inside stolen memory on igpu which is not
treated as normal RAM. The core kernel skips this memory range when
creating the hibernation image, therefore when coming back from
hibernation the GGTT programming is lost. This seems to cause issues
with broken resume where GuC FW fails to load:
[drm] *ERROR* GT0: load failed: status = 0x400000A0, time = 10ms, freq = 1250MHz (req 1300MHz), done = -1
[drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01
[drm] *ERROR* GT0: firmware signature verification failed
[drm] *ERROR* CRITICAL: Xe has declared device 0000:00:02.0 as wedged.
Current GGTT users are kernel internal and tracked as pinned, so it
should be possible to hook into the existing save/restore logic that we
use for dgpu, where the actual evict is skipped but on restore we
importantly restore the GGTT programming. This has been confirmed to
fix hibernation on at least ADL and MTL, though likely all igpu
platforms are affected.
This also means we have a hole in our testing, where the existing s4
tests only really test the driver hooks, and don't go as far as actually
rebooting and restoring from the hibernation image and in turn powering
down RAM (and therefore losing the contents of stolen).
v2 (Brost)
- Remove extra newline and drop unnecessary parentheses.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3275
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241101170156.213490-2-matthew.auld@intel.com
|
|
In order to uniquely identify the jobs, xe_sched_job tracepoints need
to have the tuple (gt_id, guc_id). Find a "hole" where the next entry is
unaligned and add one more field.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107060606.3130885-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Local values of scheduling priorities need to be adjusted when
changing the schedule_if_idle policy as those are related.
Disabling schedule_if_idle policy forces the low priority, and
enabling schedule_if_idle policy forces the normal priority.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106151301.2079-6-michal.wajdeczko@intel.com
|
|
Add 'sched_priority' attribute that will represents the scheduling
prority of the VF or PF. Values {0,1,2} correspond to priorities
{LOW,NORMAL,HIGH} respectively.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106151301.2079-5-michal.wajdeczko@intel.com
|
|
Add functions to configure PF or VF scheduling priority using the
VF_CFG_SCHED_PRIORITY KLV.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106151301.2079-4-michal.wajdeczko@intel.com
|
|
Recognize new VF_CFG_SCHED_PRIORITY key in to_string() helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106151301.2079-3-michal.wajdeczko@intel.com
|
|
This KLV allows to set the scheduling priority for each VF, also
for the PF.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106151301.2079-2-michal.wajdeczko@intel.com
|
|
In couple of places the wrong error handling goto was used to release
locks. Fix these to ensure all locks dropped on exec IOCTL errors.
Cc: Francois Dugast <francois.dugast@intel.com>
Fixes: d16ef1a18e39 ("drm/xe/exec: Switch hw engine group execution mode upon job submission")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106224944.30130-1-matthew.brost@intel.com
|
|
GuC uses GUC_ID_UNKNOWN if it can not map the CAT fault to any
context. We shouldn't treat that as G2H protocol error that would
justify a GT reset, as it may happen due to some VF activity.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105204557.1991-1-michal.wajdeczko@intel.com
|
|
While highly unlikely, incoming G2H message might be too short
so we shouldn't read any data from it prior to checking a length.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105173032.1947-4-michal.wajdeczko@intel.com
|
|
We are now logging details of the failed G2H message (including
its length) at the GuC CT component. Drop now redundant log from
the GuC submit code.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105173032.1947-3-michal.wajdeczko@intel.com
|
|
We are already logging an error once we failed to process a G2H
message, but then it's quite hard to extract the content of the
broken G2H message from the captured snapshot. Extend our error
log with the raw hexdump of the G2H message.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105173032.1947-2-michal.wajdeczko@intel.com
|
|
If another VF migration happened during post-migration recovery,
then the current worker should be finished to allow the next
one start swiftly and cleanly.
Check for defer in two places: before fixups, and before
sending RESFIX_DONE.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-6-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
|
|
During post-migration recovery, only MMIO communication to GuC is
allowed. The VF KMD needs to use that channel to ask for the new
provisioning, which includes a new GGTT range assigned to the VF.
v2: query config only instead of handshake; no need to get pm ref as
it's now kept through whole recovery (Michal)
v3: switched names of 'err' and 'ret' (Michal)
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-5-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
|
|
After restore, GuC will not answer to any messages from VF KMD until
fixups are applied. When that is done, VF KMD sends RESFIX_DONE
message to GuC, at which point GuC resumes normal operation.
This patch implements sending the RESFIX_DONE message at end of
post-migration recovery.
v2: keep pm ref during whole recovery, style fixes (Michal)
v3: assert removal to separate patch, debug message per GuC instead
of one, comments changes (Michal)
v4: improve one debug message (Michal)
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-4-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
|
|
This adds a documentation chapter, containing high level flow
of VF restore procedure.
v2: Better describe initial conditions, include GuC states on
sequence diagram (Michal)
v3: moved DOC to .c (Michal)
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-3-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
|
|
To properly support VF Save/Restore procedure, fixups need to be
applied after PF driver finishes its part of VF Restore. The fixups
are required to adjust the ongoing execution for a hardware switch
that happened, because some GFX resources are not fully virtualized,
and assigned to a VF as range from a global pool. The VF on which
a VM is restored will often have different ranges provisioned than
the VF on which save process happened. Those resource fixups are
applied by the VF driver within a restored VM.
A VF driver gets informed that it was migrated by receiving an
interrupt from each GuC. The interrupt assigned for that purpose
is "GUC SW interrupt 0". Seeing that fields set from within the
irq handler should be the trigger for fixups.
The VF can safely do post-migration fixups on resources associated
to each GuC only after that GuC issued the MIGRATED interrupt.
This change introduces a worker to be used for post-migration fixups,
and a mechanism to schedule said worker when all GuCs sent the irq.
v2: renamed and moved functions, updated logged messages, removed
unused includes, used anon struct (Michal)
v3: ordering, kerneldoc, asserts, debug messages,
on_all_tiles -> on_all_gts (Michal)
v4: fixed missing header include
v5: Explained what fixups are, explained which IRQ is used, style
fixes (Michal)
Bspec: 50868
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-2-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
|
|
Reword documentation to possibly what it meant to be.
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104143815.2112272-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The exec queue timestamp is only really useful when it's being queried
through the fdinfo. There's no need to update it so often, on every
job_free. Tracing a simple app like vkcube running shows an update
rate of ~ 120Hz. In case of discrete, the BO is on vram, creating a lot
of pcie transactions.
The update on job_free() is used to cover a gap: if exec
queue is created and destroyed rapidly, before a new query, the
timestamp still needs to be accumulated and accounted for in the xef.
Initial implementation in commit 6109f24f87d7 ("drm/xe: Add helper to
accumulate exec queue runtime") couldn't do it on the exec_queue_fini
since the xef could be gone at that point. However since commit
ce8c161cbad4 ("drm/xe: Add ref counting for xe_file") the xef is
refcounted and the exec queue always holds a reference, making this safe
now.
Improve the fix in commit 2149ded63079 ("drm/xe: Fix use after free when
client stats are captured") by reducing the frequency in which the
update is needed.
Fixes: 2149ded63079 ("drm/xe: Fix use after free when client stats are captured")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104143815.2112272-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Help debugging when LRC timestamp is updated for a exec queue.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104143815.2112272-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
In unlikely event that we fail during sending the new VF GGTT
configuration to the GuC, we will free only the GGTT node data
struct but will miss to release the actual GGTT allocation.
This will later lead to list corruption, GGTT space leak and
finally risking crash when unloading the driver:
[ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-EIO)
[ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT
[ ] list_add corruption. next->prev should be prev (ffff88813cfcd628), but was 0000000000000000. (next=ffff88813cfe2028).
[ ] RIP: 0010:__list_add_valid_or_report+0x6b/0xb0
[ ] Call Trace:
[ ] drm_mm_insert_node_in_range+0x2c0/0x4e0
[ ] xe_ggtt_node_insert+0x46/0x70 [xe]
[ ] pf_provision_vf_ggtt+0x7f5/0xa70 [xe]
[ ] xe_gt_sriov_pf_config_set_ggtt+0x5e/0x770 [xe]
[ ] ggtt_set+0x4b/0x70 [xe]
[ ] simple_attr_write_xsigned.constprop.0.isra.0+0xb0/0x110
[ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-ENOSPC)
[ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT
[ ] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP NOPTI
[ ] RIP: 0010:drm_mm_remove_node+0x1b7/0x390
[ ] Call Trace:
[ ] <TASK>
[ ] ? die_addr+0x2e/0x80
[ ] ? exc_general_protection+0x1a1/0x3e0
[ ] ? asm_exc_general_protection+0x22/0x30
[ ] ? drm_mm_remove_node+0x1b7/0x390
[ ] ggtt_node_remove+0xa5/0xf0 [xe]
[ ] xe_ggtt_node_remove+0x35/0x70 [xe]
[ ] xe_ttm_bo_destroy+0x123/0x220 [xe]
[ ] intel_user_framebuffer_destroy+0x44/0x70 [xe]
[ ] intel_plane_destroy_state+0x3b/0xc0 [xe]
[ ] drm_atomic_state_default_clear+0x1cd/0x2f0
[ ] intel_atomic_state_clear+0x9/0x20 [xe]
[ ] __drm_atomic_state_free+0x1d/0xb0
Fix that by using pf_release_ggtt() on the error path, which now
works regardless if the node has GGTT allocation or not.
Fixes: 34e804220f69 ("drm/xe: Make xe_ggtt_node struct independent")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104144901.1903-1-michal.wajdeczko@intel.com
|
|
Upon failure all locks need to be dropped before returning to the user.
Fixes: 58480c1c912f ("drm/xe: Skip VMAs pin when requesting signal to the last XE_EXEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105043524.4062774-3-matthew.brost@intel.com
|
|
In a couple of places after an exec queue is looked up the exec IOCTL
returns on input errors without dropping the exec queue ref. Fix this
ensuring the exec queue ref is dropped on input error.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105043524.4062774-2-matthew.brost@intel.com
|
|
The rendered html documentation for "Xe ASSERTs" doesn't look nice with
the mixed caps and gives the impression it was a typo. Use Title Case
Style.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105071539.2623727-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add a documentation page to detail the device coredump as implemented by
xe - it was documented in the source code, but not visible in the
rendered (html) documentation.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241102161254.1818604-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Let the introduction be useful for both userspace and kernel. Also
improve the formatting to wire up later to the documentation build.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241102161254.1818604-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
If CONFIG_DRM_USE_DYNAMIC_DEBUG is set, 'drm_dbg' function is replaced
with '__dynamic_func_call_cls', which is replaced with a do while
statement. So in the previous code, there are the following build
errors.
include/linux/dynamic_debug.h:221:58: error: expected expression before ‘do’
221 | #define __dynamic_func_call_cls(id, cls, fmt, func, ...) do { \
| ^~
include/linux/dynamic_debug.h:248:9: note: in expansion of macro ‘__dynamic_func_call_cls’
248 | __dynamic_func_call_cls(__UNIQUE_ID(ddebug), cls, fmt, func, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~
include/drm/drm_print.h:425:9: note: in expansion of macro ‘_dynamic_func_call_cls’
425 | _dynamic_func_call_cls(cat, fmt, __drm_dev_dbg, \
| ^~~~~~~~~~~~~~~~~~~~~~
include/drm/drm_print.h:504:9: note: in expansion of macro ‘drm_dev_dbg’
504 | drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~
include/drm/drm_print.h:522:33: note: in expansion of macro ‘drm_dbg_driver’
522 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~
drivers/gpu/drm/xe/xe_macros.h:14:21: note: in expansion of macro ‘drm_dbg’
14 | ((cond) && (drm_dbg(&(xe)->drm, \
| ^~~~~~~
drivers/gpu/drm/xe/xe_bo.c:2029:13: note: in expansion of macro ‘XE_IOCTL_DBG’
2029 | if (XE_IOCTL_DBG(xe, !gem_obj))
The problem is that XE_IOCTL_DBG uses this function for conditional expr.
Use a statement expression so it can also be used on conditional checks.
v2: Modify to print when only cond is true.
v3: Modify to evaluate cond only once.
Signed-off-by: Gyeyoung Baek <gye976@gmail.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241102022204.155039-1-gye976@gmail.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Fix merge in commit c787c2901e2c ("Merge drm/drm-next into
drm-xe-next"). That workaround needs to be done only once.
While at it, also remove undesired newline before checking for error.
Fixes: c787c2901e2c ("Merge drm/drm-next into drm-xe-next")
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104183104.2265275-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Backmerging to get up-to-date and to bring in a fix that was
merged through drm-misc-fixes.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge Linus tree for some drm-fixes needed for msm and xe merges.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 9 are cc:stable. 13 are MM and 4 are non-MM.
The usual collection of singletons - please see the changelogs"
* tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
mm, mmap: limit THP alignment of anonymous mappings to PMD-aligned sizes
mm: shrinker: avoid memleak in alloc_shrinker_info
.mailmap: update e-mail address for Eugen Hristev
vmscan,migrate: fix page count imbalance on node stats when demoting pages
mailmap: update Jarkko's email addresses
mm: allow set/clear page_type again
nilfs2: fix potential deadlock with newly created symlinks
Squashfs: fix variable overflow in squashfs_readpage_block
kasan: remove vmalloc_percpu test
tools/mm: -Werror fixes in page-types/slabinfo
mm, swap: avoid over reclaim of full clusters
mm: fix PSWPIN counter for large folios swap-in
mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.
mm/codetag: fix null pointer check logic for ref and tag
mm/gup: stop leaking pinned pages in low memory conditions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP driver fixes for null deref on suspend, bogus supplies
fix and reset entries fix
- BCM usb driver init array fix
- cadence array offset fix
- starfive link configuration fix
- config dependency fix for rockchip driver
- freescale reset signal fix before pll lock
- tegra driver fix for error pointer check
* tag 'phy-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: tegra: xusb: Add error pointer check in xusb.c
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Fix X1E80100 resets entries
phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check
phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK
phy: ti: phy-j721e-wiz: fix usxgmii configuration
phy: starfive: jh7110-usb: Fix link configuration to controller
phy: qcom: qmp-pcie: drop bogus x1e80100 qref supplies
phy: qcom: qmp-combo: move driver data initialisation earlier
phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks
phy: usb: disable COMMONONN for dual mode
phy: cadence: Sierra: Fix offset of DEQ open eye algorithm control register
phy: usb: Fix missing elements in BCM4908 USB init array
|
