summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-10-31drm/xe: Move Wa 1607983814 to oobLucas De Marchi
needs_wa_1607983814() predates wa_oob, so it was not being printed in /sys/kernel/debug/dri/0/*/workarounds. Port it to OOB rules. This makes the WA show up in debugfs. For TGL: OOB Workarounds 1607983814 22012773006 1409600907 Eventually the RTP infra may add support for writing registers in a loop, which would allow to keep track of the registers as well. But for now, just listing it as OOB workaround is already an improvement. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029193258.749882-1-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-31Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfLinus Torvalds
Pull bpf fixes from Daniel Borkmann: - Fix BPF verifier to force a checkpoint when the program's jump history becomes too long (Eduard Zingerman) - Add several fixes to the BPF bits iterator addressing issues like memory leaks and overflow problems (Hou Tao) - Fix an out-of-bounds write in trie_get_next_key (Byeonguk Jeong) - Fix BPF test infra's LIVE_FRAME frame update after a page has been recycled (Toke Høiland-Jørgensen) - Fix BPF verifier and undo the 40-bytes extra stack space for bpf_fastcall patterns due to various bugs (Eduard Zingerman) - Fix a BPF sockmap race condition which could trigger a NULL pointer dereference in sock_map_link_update_prog (Cong Wang) - Fix tcp_bpf_recvmsg_parser to retrieve seq_copied from tcp_sk under the socket lock (Jiayuan Chen) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, test_run: Fix LIVE_FRAME frame update after a page has been recycled selftests/bpf: Add three test cases for bits_iter bpf: Use __u64 to save the bits in bits iterator bpf: Check the validity of nr_words in bpf_iter_bits_new() bpf: Add bpf_mem_alloc_check_size() helper bpf: Free dynamically allocated bits in bpf_iter_bits_destroy() bpf: disallow 40-bytes extra stack for bpf_fastcall patterns selftests/bpf: Add test for trie_get_next_key() bpf: Fix out-of-bounds write in trie_get_next_key() selftests/bpf: Test with a very short loop bpf: Force checkpoint when jmp history is too long bpf: fix filed access without lock sock_map: fix a NULL pointer dereference in sock_map_link_update_prog()
2024-10-31Merge tag 'net-6.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi, bluetooth and netfilter. No known new regressions outstanding. Current release - regressions: - wifi: mt76: do not increase mcu skb refcount if retry is not supported Current release - new code bugs: - wifi: - rtw88: fix the RX aggregation in USB 3 mode - mac80211: fix memory corruption bug in struct ieee80211_chanctx Previous releases - regressions: - sched: - stop qdisc_tree_reduce_backlog on TC_H_ROOT - sch_api: fix xa_insert() error path in tcf_block_get_ext() - wifi: - revert "wifi: iwlwifi: remove retry loops in start" - cfg80211: clear wdev->cqm_config pointer on free - netfilter: fix potential crash in nf_send_reset6() - ip_tunnel: fix suspicious RCU usage warning in ip_tunnel_find() - bluetooth: fix null-ptr-deref in hci_read_supported_codecs - eth: mlxsw: add missing verification before pushing Tx header - eth: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue Previous releases - always broken: - wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower - netfilter: sanitize offset and length before calling skb_checksum() - core: - fix crash when config small gso_max_size/gso_ipv4_max_size - skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension - mptcp: protect sched with rcu_read_lock - eth: ice: fix crash on probe for DPLL enabled E810 LOM - eth: macsec: fix use-after-free while sending the offloading packet - eth: stmmac: fix unbalanced DMA map/unmap for non-paged SKB data - eth: hns3: fix kernel crash when 1588 is sent on HIP08 devices - eth: mtk_wed: fix path of MT7988 WO firmware" * tag 'net-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) net: hns3: fix kernel crash when 1588 is sent on HIP08 devices net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue net: hns3: initialize reset_timer before hclgevf_misc_irq_init() net: hns3: don't auto enable misc vector net: hns3: Resolved the issue that the debugfs query result is inconsistent. net: hns3: fix missing features due to dev->features configuration too early net: hns3: fixed reset failure issues caused by the incorrect reset type net: hns3: add sync command to sync io-pgtable net: hns3: default enable tx bounce buffer when smmu enabled netfilter: nft_payload: sanitize offset and length before calling skb_checksum() net: ethernet: mtk_wed: fix path of MT7988 WO firmware selftests: forwarding: Add IPv6 GRE remote change tests mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address mlxsw: pci: Sync Rx buffers for device mlxsw: pci: Sync Rx buffers for CPU mlxsw: spectrum_ptp: Add missing verification before pushing Tx header net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6() netfilter: Fix use-after-free in get_info() ...
2024-11-01Merge tag 'mediatek-drm-fixes-20241028' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes - 20241028 1. Fix degradation problem of alpha blending 2. Fix color format MACROs in OVL 3. Fix get efuse issue for MT8188 DPTX 4. Fix potential NULL dereference in mtk_crtc_destroy() 5. Correct dpi power-domains property 6. Add split subschema property constraints Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241028135846.3570-1-chunkuang.hu@kernel.org
2024-11-01Merge tag 'amd-drm-fixes-6.12-2024-10-31' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.12-2024-10-31: amdgpu: - DCN 3.5 fix - Vangogh SMU KASAN fix - SMU 13 profile reporting fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241031151539.3523633-1-alexander.deucher@amd.com
2024-10-31drm/xe/guc: Fix dereference before NULL checkEverest K.C.
The pointer list->list is dereferenced before the NULL check. Fix this by moving the NULL check outside the for loop, so that the check is performed before the dereferencing. The list->list pointer cannot be NULL so this has no effect on runtime. It's just a correctness issue. This issue was reported by Coverity Scan. https://scan7.scan.coverity.com/#/project-view/51525/11354?selectedIssue=1600335 Fixes: 0f1fdf559225 ("drm/xe/guc: Save manual engine capture into capture list") Signed-off-by: Everest K.C. <everestkc@everestkc.com.np> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023233356.5479-1-everestkc@everestkc.com.np
2024-11-01Merge tag 'drm-misc-fixes-2024-10-31' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: ivpu: - Fix firewall IRQ handling panthor: - Fix firmware initialization wrt page sizes - Fix handling and reporting of dead job groups sched: - Guarantee forward progress via WC_MEM_RECLAIM tests: - Fix memory leak in drm_display_mode_from_cea_vic() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241031144348.GA7826@linux-2.fritz.box
2024-10-31Merge tag 'sound-6.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here we see slightly more commits than wished, but basically all are small and mostly trivial fixes. The only core change is the workaround for __counted_by() usage in ASoC DAPM code, while the rest are device-specific fixes for Intel Baytrail devices, Cirrus and wcd937x codecs, and HD-audio / USB-audio devices" * tag 'sound-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Fix headset mic on TUXEDO Stellaris 16 Gen6 mb1 ALSA: hda/realtek: Fix headset mic on TUXEDO Gemini 17 Gen3 ALSA: usb-audio: Add quirks for Dell WD19 dock ASoC: codecs: wcd937x: relax the AUX PDM watchdog ASoC: codecs: wcd937x: add missing LO Switch control ASoC: dt-bindings: rockchip,rk3308-codec: add port property ALSA: hda/realtek: Add subwoofer quirk for Infinix ZERO BOOK 13 ASoC: dapm: fix bounds checker error in dapm_widget_list_create ASoC: Intel: sst: Fix used of uninitialized ctx to log an error ASoC: cs42l51: Fix some error handling paths in cs42l51_probe() ASoC: Intel: sst: Support LPE0F28 ACPI HID ALSA: hda/realtek: Limit internal Mic boost on Dell platform ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet ASoC: Intel: bytcr_rt5640: Add support for non ACPI instantiated codec ASoC: codecs: rt5640: Always disable IRQs from rt5640_cancel_work()
2024-10-31gpiolib: fix debugfs dangling chip separatorJohan Hovold
Add the missing newline after entries for recently removed gpio chips so that the chip sections are separated by a newline as intended. Fixes: e348544f7994 ("gpio: protect the list of GPIO devices with SRCU") Cc: stable@vger.kernel.org # 6.9 Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241028125000.24051-3-johan+linaro@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-10-31gpiolib: fix debugfs newline separatorsJohan Hovold
The gpiolib debugfs interface exports a list of all gpio chips in a system and the state of their pins. The gpio chip sections are supposed to be separated by a newline character, but a long-standing bug prevents the separator from being included when output is generated in multiple sessions, making the output inconsistent and hard to read. Make sure to only suppress the newline separator at the beginning of the file as intended. Fixes: f9c4a31f6150 ("gpiolib: Use seq_file's iterator interface") Cc: stable@vger.kernel.org # 3.7 Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241028125000.24051-2-johan+linaro@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-10-31btrfs: fix defrag not merging contiguous extents due to merged extent mapsFilipe Manana
When running defrag (manual defrag) against a file that has extents that are contiguous and we already have the respective extent maps loaded and merged, we end up not defragging the range covered by those contiguous extents. This happens when we have an extent map that was the result of merging multiple extent maps for contiguous extents and the length of the merged extent map is greater than or equals to the defrag threshold length. The script below reproduces this scenario: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT # Create a 256K file with 4 extents of 64K each. xfs_io -f -c "falloc 0 64K" \ -c "pwrite 0 64K" \ -c "falloc 64K 64K" \ -c "pwrite 64K 64K" \ -c "falloc 128K 64K" \ -c "pwrite 128K 64K" \ -c "falloc 192K 64K" \ -c "pwrite 192K 64K" \ $MNT/foo umount $MNT echo -n "Initial number of file extent items: " btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l mount $DEV $MNT # Read the whole file in order to load and merge extent maps. cat $MNT/foo > /dev/null btrfs filesystem defragment -t 128K $MNT/foo umount $MNT echo -n "Number of file extent items after defrag with 128K threshold: " btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l mount $DEV $MNT # Read the whole file in order to load and merge extent maps. cat $MNT/foo > /dev/null btrfs filesystem defragment -t 256K $MNT/foo umount $MNT echo -n "Number of file extent items after defrag with 256K threshold: " btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l Running it: $ ./test.sh Initial number of file extent items: 4 Number of file extent items after defrag with 128K threshold: 4 Number of file extent items after defrag with 256K threshold: 4 The 4 extents don't get merged because we have an extent map with a size of 256K that is the result of merging the individual extent maps for each of the four 64K extents and at defrag_lookup_extent() we have a value of zero for the generation threshold ('newer_than' argument) since this is a manual defrag. As a consequence we don't call defrag_get_extent() to get an extent map representing a single file extent item in the inode's subvolume tree, so we end up using the merged extent map at defrag_collect_targets() and decide not to defrag. Fix this by updating defrag_lookup_extent() to always discard extent maps that were merged and call defrag_get_extent() regardless of the minimum generation threshold ('newer_than' argument). A test case for fstests will be sent along soon. CC: stable@vger.kernel.org # 6.1+ Fixes: 199257a78bb0 ("btrfs: defrag: don't use merged extent map for their generation check") Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-10-31btrfs: fix extent map merging not happening for adjacent extentsFilipe Manana
If we have 3 or more adjacent extents in a file, that is, consecutive file extent items pointing to adjacent extents, within a contiguous file range and compatible flags, we end up not merging all the extents into a single extent map. For example: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt/sdc $ xfs_io -f -d -c "pwrite -b 64K 0 64K" \ -c "pwrite -b 64K 64K 64K" \ -c "pwrite -b 64K 128K 64K" \ -c "pwrite -b 64K 192K 64K" \ /mnt/sdc/foo After all the ordered extents complete we unpin the extent maps and try to merge them, but instead of getting a single extent map we get two because: 1) When the first ordered extent completes (file range [0, 64K)) we unpin its extent map and attempt to merge it with the extent map for the range [64K, 128K), but we can't because that extent map is still pinned; 2) When the second ordered extent completes (file range [64K, 128K)), we unpin its extent map and merge it with the previous extent map, for file range [0, 64K), but we can't merge with the next extent map, for the file range [128K, 192K), because this one is still pinned. The merged extent map for the file range [0, 128K) gets the flag EXTENT_MAP_MERGED set; 3) When the third ordered extent completes (file range [128K, 192K)), we unpin its extent map and attempt to merge it with the previous extent map, for file range [0, 128K), but we can't because that extent map has the flag EXTENT_MAP_MERGED set (mergeable_maps() returns false due to different flags) while the extent map for the range [128K, 192K) doesn't have that flag set. We also can't merge it with the next extent map, for file range [192K, 256K), because that one is still pinned. At this moment we have 3 extent maps: One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set. One for file range [128K, 192K). One for file range [192K, 256K) which is still pinned; 4) When the fourth and final extent completes (file range [192K, 256K)), we unpin its extent map and attempt to merge it with the previous extent map, for file range [128K, 192K), which succeeds since none of these extent maps have the EXTENT_MAP_MERGED flag set. So we end up with 2 extent maps: One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set. One for file range [128K, 256K), with the flag EXTENT_MAP_MERGED set. Since after merging extent maps we don't attempt to merge again, that is, merge the resulting extent map with the one that is now preceding it (and the one following it), we end up with those two extent maps, when we could have had a single extent map to represent the whole file. Fix this by making mergeable_maps() ignore the EXTENT_MAP_MERGED flag. While this doesn't present any functional issue, it prevents the merging of extent maps which allows to save memory, and can make defrag not merging extents too (that will be addressed in the next patch). Fixes: 199257a78bb0 ("btrfs: defrag: don't use merged extent map for their generation check") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-10-31bpf, test_run: Fix LIVE_FRAME frame update after a page has been recycledToke Høiland-Jørgensen
The test_run code detects whether a page has been modified and re-initialises the xdp_frame structure if it has, using xdp_update_frame_from_buff(). However, xdp_update_frame_from_buff() doesn't touch frame->mem, so that wasn't correctly re-initialised, which led to the pages from page_pool not being returned correctly. Syzbot noticed this as a memory leak. Fix this by also copying the frame->mem structure when re-initialising the frame, like we do on initialisation of a new page from page_pool. Fixes: e5995bc7e2ba ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption") Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN") Reported-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/bpf/20241030-test-run-mem-fix-v1-1-41e88e8cae43@redhat.com
2024-10-31Merge tag 'nvme-6.12-2024-10-31' of git://git.infradead.org/nvme into block-6.12Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.12 - Spec compliant identification fix (Keith) - Module parameter to enable backward compatibility on unusual namespace formats (Keith) - Target double free fix when using keys (Vitaliy) - Passthrough command error handling fix (Keith)" * tag 'nvme-6.12-2024-10-31' of git://git.infradead.org/nvme: nvme: re-fix error-handling for io_uring nvme-passthrough nvmet-auth: assign dh_key to NULL after kfree_sensitive nvme: module parameter to disable pi with offsets nvme: enhance cns version checking
2024-10-31io_uring/rw: fix missing NOWAIT check for O_DIRECT start writeJens Axboe
When io_uring starts a write, it'll call kiocb_start_write() to bump the super block rwsem, preventing any freezes from happening while that write is in-flight. The freeze side will grab that rwsem for writing, excluding any new writers from happening and waiting for existing writes to finish. But io_uring unconditionally uses kiocb_start_write(), which will block if someone is currently attempting to freeze the mount point. This causes a deadlock where freeze is waiting for previous writes to complete, but the previous writes cannot complete, as the task that is supposed to complete them is blocked waiting on starting a new write. This results in the following stuck trace showing that dependency with the write blocked starting a new write: task:fio state:D stack:0 pid:886 tgid:886 ppid:876 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_rwsem_wait+0x1e8/0x3f8 __percpu_down_read+0xe8/0x500 io_write+0xbb8/0xff8 io_issue_sqe+0x10c/0x1020 io_submit_sqes+0x614/0x2110 __arm64_sys_io_uring_enter+0x524/0x1038 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 INFO: task fsfreeze:7364 blocked for more than 15 seconds. Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963 with the attempting freezer stuck trying to grab the rwsem: task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_down_write+0x2b0/0x680 freeze_super+0x248/0x8a8 do_vfs_ioctl+0x149c/0x1b18 __arm64_sys_ioctl+0xd0/0x1a0 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a blocking grab of the super block rwsem if it isn't set. For normal issue where IOCB_NOWAIT would always be set, this returns -EAGAIN which will have io_uring core issue a blocking attempt of the write. That will in turn also get completions run, ensuring forward progress. Since freezing requires CAP_SYS_ADMIN in the first place, this isn't something that can be triggered by a regular user. Cc: stable@vger.kernel.org # 5.10+ Reported-by: Peter Mann <peter.mann@sh.cz> Link: https://lore.kernel.org/io-uring/38c94aec-81c9-4f62-b44e-1d87f5597644@sh.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-31drm/xe: Don't short circuit TDR on jobs not startedMatthew Brost
Short circuiting TDR on jobs not started is an optimization which is not required. On LNL we are facing an issue where jobs do not get scheduled by the GuC if it misses a GGTT page update. When this occurs let the TDR fire, toggle the scheduling which may get the job unstuck, and print a warning message. If the TDR fires twice on job that hasn't started, timeout the job. v2: - Add warning message (Paulo) - Add fixes tag (Paulo) - Timeout job which hasn't started after TDR firing twice v3: - Include local change v4: - Short circuit check_timeout on job not started - use warn level rather than notice (Paulo) Fixes: 7ddb9403dd74 ("drm/xe: Sample ctx timestamp to determine if jobs have timed out") Cc: stable@vger.kernel.org Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025214330.2010521-2-matthew.brost@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 35d25a4a0012e690ef0cc4c5440231176db595cc) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-31drm/xe: Add mmio read before GGTT invalidateMatthew Brost
On LNL without a mmio read before a GGTT invalidate the GuC can incorrectly read the GGTT scratch page upon next access leading to jobs not getting scheduled. A mmio read before a GGTT invalidate seems to fix this. Since a GGTT invalidate is not a hot code path, blindly do a mmio read before each GGTT invalidate. Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: stable@vger.kernel.org Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3164 Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023221200.1797832-1-matthew.brost@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 5a710196883e0ac019ac6df2a6d79c16ad3c32fa) [ Fix conflict with mmio vs gt argument ] Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-31gpio: sloppy-logic-analyzer: Check for error code from devm_mutex_init() callAndy Shevchenko
Even if it's not critical, the avoidance of checking the error code from devm_mutex_init() call today diminishes the point of using devm variant of it. Tomorrow it may even leak something. Add the missed check. Fixes: 7828b7bbbf20 ("gpio: add sloppy logic analyzer using polling") Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241030174132.2113286-3-andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-10-31kconfig: show sub-menu entries even if the prompt is hiddenMasahiro Yamada
Since commit f79dc03fe68c ("kconfig: refactor choice value calculation"), when EXPERT is disabled, nothing within the "if INPUT" ... "endif" block in drivers/input/Kconfig is displayed. This issue affects all command-line interfaces and GUI frontends. The prompt for INPUT is hidden when EXPERT is disabled. Previously, menu_is_visible() returned true in this case; however, it now returns false, resulting in all sub-menu entries being skipped. Here is a simplified test case illustrating the issue: config A bool "A" if X default y config B bool "B" depends on A When X is disabled, A becomes unconfigurable and is forced to y. B should be displayed, as its dependency is met. This commit restores the necessary code, so menu_is_visible() functions as it did previously. Fixes: f79dc03fe68c ("kconfig: refactor choice value calculation") Reported-by: Edmund Raile <edmund.raile@proton.me> Closes: https://lore.kernel.org/all/5fd0dfc7ff171aa74352e638c276069a5f2e888d.camel@proton.me/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-10-31kbuild: deb-pkg: add pkg.linux-upstream.nokerneldbg build profileMasahiro Yamada
The Debian kernel supports the pkg.linux.nokerneldbg build profile. The debug package tends to become huge, and you may not want to build it even when CONFIG_DEBUG_INFO is enabled. This commit introduces a similar profile for the upstream kernel. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-10-31kbuild: deb-pkg: add pkg.linux-upstream.nokernelheaders build profileMasahiro Yamada
Since commit f1d87664b82a ("kbuild: cross-compile linux-headers package when possible"), 'make bindeb-pkg' may attempt to cross-compile the linux-headers package, but it fails under certain circumstances. For example, when CONFIG_MODULE_SIG_FORMAT is enabled on Debian, the following command fails: $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg [ snip ] Rebuilding host programs with aarch64-linux-gnu-gcc... HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/kallsyms HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sorttable HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/asn1_compiler HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sign-file In file included from /usr/include/openssl/opensslv.h:109, from debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sign-file.c:25: /usr/include/openssl/macros.h:14:10: fatal error: openssl/opensslconf.h: No such file or directory 14 | #include <openssl/opensslconf.h> | ^~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. This commit adds a new profile, pkg.linux-upstream.nokernelheaders, to guard the linux-headers package. There are two options to fix the above issue. Option 1: Set the pkg.linux-upstream.nokernelheaders build profile $ DEB_BUILD_PROFILES=pkg.linux-upstream.nokernelheaders \ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg This skips the building of the linux-headers package. Option 2: Install the necessary build dependencies If you want to cross-compile the linux-headers package, you need to install additional packages. For example, on Debian, the packages necessary for cross-compiling it to arm64 can be installed with the following commands: # dpkg --add-architecture arm64 # apt update # apt install gcc-aarch64-linux-gnu libssl-dev:arm64 Fixes: f1d87664b82a ("kbuild: cross-compile linux-headers package when possible") Reported-by: Ron Economos <re@w6rz.net> Closes: https://lore.kernel.org/all/b3d4f49e-7ddb-29ba-0967-689232329b53@w6rz.net/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Ron Economos <re@w6rz.net> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-10-31kbuild: rpm-pkg: disable kernel-devel package when cross-compilingMasahiro Yamada
Since commit f1d87664b82a ("kbuild: cross-compile linux-headers package when possible"), 'make binrpm-pkg' may attempt to cross-compile the kernel-devel package, but it fails under certain circumstances. For example, when CONFIG_MODULE_SIG_FORMAT is enabled on openSUSE Tumbleweed, the following command fails: $ make ARCH=arm64 CROSS_COMPILE=aarch64-suse-linux- binrpm-pkg [ snip ] Rebuilding host programs with aarch64-suse-linux-gcc... HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/kallsyms HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sorttable HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/asn1_compiler HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sign-file /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sign-file.c:25:10: fatal error: openssl/opensslv.h: No such file or directory 25 | #include <openssl/opensslv.h> | ^~~~~~~~~~~~~~~~~~~~ compilation terminated. I believe this issue is less common on Fedora because the disto's cross- compilier cannot link user-space programs. Hence, CONFIG_CC_CAN_LINK is unset. On Fedora 40, the package information explains this limitation clearly: $ dnf info gcc-aarch64-linux-gnu [ snip ] Description : Cross-build GNU C compiler. : : Only building kernels is currently supported. Support for cross-building : user space programs is not currently provided as that would massively multiply : the number of packages. Anyway, cross-compiling RPM packages is somewhat challenging. This commit disables the kernel-devel package when cross-compiling because I did not come up with a better solution. Fixes: f1d87664b82a ("kbuild: cross-compile linux-headers package when possible") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2024-10-31gpio: fix uninit-value in swnode_find_gpioSuraj Sonawane
Fix an issue detected by the Smatch tool: drivers/gpio/gpiolib-swnode.c:78 swnode_find_gpio() error: uninitialized symbol 'ret'. The issue occurs because the 'ret' variable may be used without initialization if the for_each_gpio_property_name loop does not run. This could lead to returning an undefined value, causing unpredictable behavior. Initialize 'ret' to 0 before the loop to ensure the function returns an error code if no properties are parsed, maintaining proper error handling. Fixes: 9e4c6c1ad ("Merge tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux") Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com> Link: https://lore.kernel.org/r/20241026090642.28633-1-surajsonawane0215@gmail.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-10-31drm/sched: Document purpose of drm_sched_{start,stop}Philipp Stanner
drm_sched_start()'s and drm_sched_stop()'s names suggest that those functions might be intended for actively starting and stopping the scheduler on initialization and teardown. They are, however, only used on timeout handling (reset recovery). The docstrings should reflect that to prevent confusion. Document those functions' purpose. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Philipp Stanner <pstanner@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029133819.78696-2-pstanner@redhat.com
2024-10-31Merge tag 'nf-24-10-31' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Remove unused parameters in conntrack_dump_flush.c used by selftests, from Liu Jing. 2) Fix possible UaF when removing xtables module via getsockopt() interface, from Dong Chenchen. 3) Fix potential crash in nf_send_reset6() reported by syzkaller. From Eric Dumazet 4) Validate offset and length before calling skb_checksum() in nft_payload, otherwise hitting BUG() is possible. netfilter pull request 24-10-31 * tag 'nf-24-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_payload: sanitize offset and length before calling skb_checksum() netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6() netfilter: Fix use-after-free in get_info() selftests: netfilter: remove unused parameter ==================== Link: https://patch.msgid.link/ Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31Merge tag 'for-net-2024-10-30' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci: fix null-ptr-deref in hci_read_supported_codecs * tag 'for-net-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs ==================== Link: https://patch.msgid.link/20241030192205.38298-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'Paolo Abeni
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver ChangeLog: v2 -> v3: - Rewrite the commit logs of net: hns3: add sync command to sync io-pgtable' to add more verbose explanation, suggested Paolo. - Add fixes tag for hardware issue, suggested Paolo and Simon Horman. v2: https://lore.kernel.org/all/20241018101059.1718375-1-shaojijie@huawei.com/ v1 -> v2: - Pass IRQF_NO_AUTOEN to request_irq(), suggested by Jakub. - Rewrite the commit logs of 'net: hns3: default enable tx bounce buffer when smmu enabled' and 'net: hns3: add sync command to sync io-pgtable'. v1: https://lore.kernel.org/all/20241011094521.3008298-1-shaojijie@huawei.com/ ==================== Link: https://patch.msgid.link/20241025092938.2912958-1-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: fix kernel crash when 1588 is sent on HIP08 devicesJie Wang
Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issueHao Lan
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: initialize reset_timer before hclgevf_misc_irq_init()Jian Shen
Currently the misc irq is initialized before reset_timer setup. But it will access the reset_timer in the irq handler. So initialize the reset_timer earlier. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: don't auto enable misc vectorJian Shen
Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don't auto enable misc vector when request irq.. Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: Resolved the issue that the debugfs query result is inconsistent.Hao Lan
This patch modifies the implementation of debugfs: When the user process stops unexpectedly, not all data of the file system is read. In this case, the save_buf pointer is not released. When the user process is called next time, save_buf is used to copy the cached data to the user space. As a result, the queried data is inconsistent. To solve this problem, determine whether the function is invoked for the first time based on the value of *ppos. If *ppos is 0, obtain the actual data. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: fix missing features due to dev->features configuration too earlyHao Lan
Currently, the netdev->features is configured in hns3_nic_set_features. As a result, __netdev_update_features considers that there is no feature difference, and the procedures of the real features are missing. Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: fixed reset failure issues caused by the incorrect reset typeHao Lan
When a reset type that is not supported by the driver is input, a reset pending flag bit of the HNAE3_NONE_RESET type is generated in reset_pending. The driver does not have a mechanism to clear this type of error. As a result, the driver considers that the reset is not complete. This patch provides a mechanism to clear the HNAE3_NONE_RESET flag and the parameter of hnae3_ae_ops.set_default_reset_request is verified. The error message: hns3 0000:39:01.0: cmd failed -16 hns3 0000:39:01.0: hclge device re-init failed, VF is disabled! hns3 0000:39:01.0: failed to reset VF stack hns3 0000:39:01.0: failed to reset VF(4) hns3 0000:39:01.0: prepare reset(2) wait done hns3 0000:39:01.0 eth4: already uninitialized Use the crash tool to view struct hclgevf_dev: struct hclgevf_dev { ... default_reset_request = 0x20, reset_level = HNAE3_NONE_RESET, reset_pending = 0x100, reset_type = HNAE3_NONE_RESET, ... }; Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: add sync command to sync io-pgtableJian Shen
To avoid errors in pgtable prefectch, add a sync command to sync io-pagtable. This is a supplement for the previous patch. We want all the tx packet can be handled with tx bounce buffer path. But it depends on the remain space of the spare buffer, checked by the hns3_can_use_tx_bounce(). In most cases, maybe 99.99%, it returns true. But once it return false by no available space, the packet will be handled with the former path, which will map/unmap the skb buffer. Then the driver will face the smmu prefetch risk again. So add a sync command in this case to avoid smmu prefectch, just protects corner scenes. Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: default enable tx bounce buffer when smmu enabledPeiyang Wang
The SMMU engine on HIP09 chip has a hardware issue. SMMU pagetable prefetch features may prefetch and use a invalid PTE even the PTE is valid at that time. This will cause the device trigger fake pagefaults. The solution is to avoid prefetching by adding a SYNC command when smmu mapping a iova. But the performance of nic has a sharp drop. Then we do this workaround, always enable tx bounce buffer, avoid mapping/unmapping on TX path. This issue only affects HNS3, so we always enable tx bounce buffer when smmu enabled to improve performance. Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31netfilter: nft_payload: sanitize offset and length before calling skb_checksum()Pablo Neira Ayuso
If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON(). skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed. Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support") Reported-by: Slavin Liu <slavin-ayu@qq.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-10-31drm/panel: leadtek-ltk050h3146w: transition to mipi_dsi wrapped functionsTejas Vipin
Changes the leadtek-ltk050h3146w panel to use multi style functions for improved error handling. Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241026035928.183454-1-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241026035928.183454-1-tejasvipin76@gmail.com
2024-10-31drm/panel: samsung-s6e88a0-ams427ap24: Add flip optionJakob Hauser
The way of implementing a flip option follows the existing panel-samsung-s6e8aa0.c [1][2][3]. The value to flip the screen is taken from a downstream kernel file of a similar but older panel [4]. The mipi clock [5] for the new panel samsung-s6e88a0-ams427ap24 matches 461 MHz and a hardware read-out of the 0xcb values corresponds to revision R01 of that older panel [6]. Although for samsung-s6e88a0-ams427ap24 that's in non-flipped state while in this older driver it seems to be the other way around. Further up there is a hint [7] basically saying for revision R01 to change the first word of the 0xcb command from 0x06 to 0x0e, which is actually setting BIT(3) of that word. This causes a horizontal flip. [1] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L103 [2] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L207-L211 [3] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L954-L974 [4] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c [5] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L2027-L2028 [6] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L137-L151 [7] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L66-L74 Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1491f275e9956b2da1f1e2580abd54f4e459c7d2.1730070570.git.jahau@rocketmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1491f275e9956b2da1f1e2580abd54f4e459c7d2.1730070570.git.jahau@rocketmail.com
2024-10-31drm/panel: samsung-s6e88a0-ams427ap24: Add brightness controlJakob Hauser
The tables for brightness to candela, aid and elvss were taken from downstream kernel file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [1][2][3]. The gamma table gets generated in "ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c" [4] with hard-coded starting values. The function smart_dimming_init() [5] goes through the v{*}_adjustments, generate_gray_scale and gamma_init procedure. Instead of calculating it manually, it's easier to compile a custom downstream kernel with SMART_DIMMING_DEBUG enabled and read out dmesg early at boot. Selection of the values for aid and elvss are again according to downstream file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [6][7]. The set of write commands is guided by downstream file "ss_dsi_panel_common.c" [8] followed by "ss_dsi_panel_S6E88A0_AMS427AP24.c" [9]. The dsi mode flag MIPI_DSI_MODE_VIDEO_NO_HFP prevents screen flickering while changing the brightness. [1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L341-L397 [2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L214-L254 [3] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L301-L320 [4] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c [5] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c#L1816-L1900 [6] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L256-L268 [7] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L322-L334 [8] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/ss_dsi_panel_common.c#L1389-L1517 [9] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_panel_S6E88A0_AMS427AP24.c#L666-L678 Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/30c154954a4e0f75d90f6ef6f393a5ba8b3ffea9.1730070570.git.jahau@rocketmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/30c154954a4e0f75d90f6ef6f393a5ba8b3ffea9.1730070570.git.jahau@rocketmail.com
2024-10-31drm/panel: samsung-s6e88a0-ams427ap24: Add initial driverJakob Hauser
This initial part of the panel driver was mostly generated by the "linux-mdss-dsi-panel-driver-generator" tool [1], reading downstream Android kernel file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [2]. On top of the generic output of the tool, there were a couple of changes applied: - Added mipi_dsi_dcs_set_display_on() to function s6e88a0_ams427ap24_on(), otherwise the display does not show up. - In functions s6e88a0_ams427ap24_on() and s6e88a0_ams427ap24_off() changed DSI commands to multi context and used "accum_err" returns. - In functions s6e88a0_ams427ap24_on() and s6e88a0_ams427ap24_off() replaced msleep() by mipi_dsi_msleep(). - The function s6e88a0_ams427ap24_get_modes() was changed to make use of drm_connector_helper_get_modes_fixed(). This also required to include drm/drm_probe_helper.h. - In function s6e88a0_ams427ap24_probe() registring the regulators was changed to devm_regulator_bulk_get_const(). This required to change supplies in struct s6e88a0_ams427ap24 to a pointer. - Removed bool "prepared" from struct s6e88a0_ams427ap24 and according parts in functions s6e88a0_ams427ap24_prepare() and s6e88a0_ams427ap24_unprepare(). - Removed include <linux/of.h>, it's not needed. - Added comments to the mipi_dsi_dcs_write_seq_multi() lines in function s6e88a0_ams427ap24_on(). [1] https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator [2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/d92ef0036b66520bb6d1ec908165e776cf30c303.1730070570.git.jahau@rocketmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/d92ef0036b66520bb6d1ec908165e776cf30c303.1730070570.git.jahau@rocketmail.com
2024-10-31dt-bindings: display: panel: Add Samsung S6E88A0-AMS427AP24Jakob Hauser
Add bindings for Samsung AMS427AP24 panel with S6E88A0 controller. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/d60428e7dad57efd42948adfd34b81335dabcd1f.1730070570.git.jahau@rocketmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/d60428e7dad57efd42948adfd34b81335dabcd1f.1730070570.git.jahau@rocketmail.com
2024-10-31dt-bindings: display: panel: Move flip properties to panel-commonJakob Hauser
The flip properties were used by "samsung,s6e8aa0.yaml" only so far. By introducing "samsung,s6e88a0-ams427ap24.yaml" they become more common. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/e4edd8fc07b89006207f5f8962a816ff7f8f4601.1730070570.git.jahau@rocketmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/e4edd8fc07b89006207f5f8962a816ff7f8f4601.1730070570.git.jahau@rocketmail.com
2024-10-31drm/tests: hdmi: Fix memory leaks in drm_display_mode_from_cea_vic()Jinjie Ruan
modprobe drm_hdmi_state_helper_test and then rmmod it, the following memory leak occurs. The `mode` allocated in drm_mode_duplicate() called by drm_display_mode_from_cea_vic() is not freed, which cause the memory leak: unreferenced object 0xffffff80ccd18100 (size 128): comm "kunit_try_catch", pid 1851, jiffies 4295059695 hex dump (first 32 bytes): 57 62 00 00 80 02 90 02 f0 02 20 03 00 00 e0 01 Wb........ ..... ea 01 ec 01 0d 02 00 00 0a 00 00 00 00 00 00 00 ................ backtrace (crc c2f1aa95): [<000000000f10b11b>] kmemleak_alloc+0x34/0x40 [<000000001cd4cf73>] __kmalloc_cache_noprof+0x26c/0x2f4 [<00000000f1f3cffa>] drm_mode_duplicate+0x44/0x19c [<000000008cbeef13>] drm_display_mode_from_cea_vic+0x88/0x98 [<0000000019daaacf>] 0xffffffedc11ae69c [<000000000aad0f85>] kunit_try_run_case+0x13c/0x3ac [<00000000a9210bac>] kunit_generic_run_threadfn_adapter+0x80/0xec [<000000000a0b2e9e>] kthread+0x2e8/0x374 [<00000000bd668858>] ret_from_fork+0x10/0x20 ...... Free `mode` by using drm_kunit_display_mode_from_cea_vic() to fix it. Cc: stable@vger.kernel.org Fixes: 4af70f19e559 ("drm/tests: Add RGB Quantization tests") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-4-ruanjinjie@huawei.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-10-31drm/connector: hdmi: Fix memory leak in drm_display_mode_from_cea_vic()Jinjie Ruan
modprobe drm_connector_test and then rmmod drm_connector_test, the following memory leak occurs. The `mode` allocated in drm_mode_duplicate() called by drm_display_mode_from_cea_vic() is not freed, which cause the memory leak: unreferenced object 0xffffff80cb0ee400 (size 128): comm "kunit_try_catch", pid 1948, jiffies 4294950339 hex dump (first 32 bytes): 14 44 02 00 80 07 d8 07 04 08 98 08 00 00 38 04 .D............8. 3c 04 41 04 65 04 00 00 05 00 00 00 00 00 00 00 <.A.e........... backtrace (crc 90e9585c): [<00000000ec42e3d7>] kmemleak_alloc+0x34/0x40 [<00000000d0ef055a>] __kmalloc_cache_noprof+0x26c/0x2f4 [<00000000c2062161>] drm_mode_duplicate+0x44/0x19c [<00000000f96c74aa>] drm_display_mode_from_cea_vic+0x88/0x98 [<00000000d8f2c8b4>] 0xffffffdc982a4868 [<000000005d164dbc>] kunit_try_run_case+0x13c/0x3ac [<000000006fb23398>] kunit_generic_run_threadfn_adapter+0x80/0xec [<000000006ea56ca0>] kthread+0x2e8/0x374 [<000000000676063f>] ret_from_fork+0x10/0x20 ...... Free `mode` by using drm_kunit_display_mode_from_cea_vic() to fix it. Cc: stable@vger.kernel.org Fixes: abb6f74973e2 ("drm/tests: Add HDMI TDMS character rate tests") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-3-ruanjinjie@huawei.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-10-31drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()Jinjie Ruan
As Maxime suggested, add a new helper drm_kunit_display_mode_from_cea_vic(), it can replace the direct call of drm_display_mode_from_cea_vic(), and it will help solving the `mode` memory leaks. Acked-by: Maxime Ripard <mripard@kernel.org> Suggested-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-2-ruanjinjie@huawei.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-10-30drm/xe: Don't short circuit TDR on jobs not startedMatthew Brost
Short circuiting TDR on jobs not started is an optimization which is not required. On LNL we are facing an issue where jobs do not get scheduled by the GuC if it misses a GGTT page update. When this occurs let the TDR fire, toggle the scheduling which may get the job unstuck, and print a warning message. If the TDR fires twice on job that hasn't started, timeout the job. v2: - Add warning message (Paulo) - Add fixes tag (Paulo) - Timeout job which hasn't started after TDR firing twice v3: - Include local change v4: - Short circuit check_timeout on job not started - use warn level rather than notice (Paulo) Fixes: 7ddb9403dd74 ("drm/xe: Sample ctx timestamp to determine if jobs have timed out") Cc: stable@vger.kernel.org Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025214330.2010521-2-matthew.brost@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-30drm/xe: Add mmio read before GGTT invalidateMatthew Brost
On LNL without a mmio read before a GGTT invalidate the GuC can incorrectly read the GGTT scratch page upon next access leading to jobs not getting scheduled. A mmio read before a GGTT invalidate seems to fix this. Since a GGTT invalidate is not a hot code path, blindly do a mmio read before each GGTT invalidate. Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: stable@vger.kernel.org Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3164 Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023221200.1797832-1-matthew.brost@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-30mm: allow set/clear page_type againYu Zhao
Some page flags (page->flags) were converted to page types (page->page_types). A recent example is PG_hugetlb. From the exclusive writer's perspective, e.g., a thread doing __folio_set_hugetlb(), there is a difference between the page flag and type APIs: the former allows the same non-atomic operation to be repeated whereas the latter does not. For example, calling __folio_set_hugetlb() twice triggers VM_BUG_ON_FOLIO(), since the second call expects the type (PG_hugetlb) not to be set previously. Using add_hugetlb_folio() as an example, it calls __folio_set_hugetlb() in the following error-handling path. And when that happens, it triggers the aforementioned VM_BUG_ON_FOLIO(). if (folio_test_hugetlb(folio)) { rc = hugetlb_vmemmap_restore_folio(h, folio); if (rc) { spin_lock_irq(&hugetlb_lock); add_hugetlb_folio(h, folio, false); ... It is possible to make hugeTLB comply with the new requirements from the page type API. However, a straightforward fix would be to just allow the same page type to be set or cleared again inside the API, to avoid any changes to its callers. Link: https://lkml.kernel.org/r/20241020042212.296781-1-yuzhao@google.com Fixes: d99e3140a4d3 ("mm: turn folio_test_hugetlb into a PageType") Signed-off-by: Yu Zhao <yuzhao@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-10-30nilfs2: fix potential deadlock with newly created symlinksRyusuke Konishi
Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers memory reclamation involving the filesystem layer, which can result in circular lock dependencies among the reader/writer semaphore nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the fs_reclaim pseudo lock. This is because after commit 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem"), the gfp flags of the page cache for symbolic links are overwritten to GFP_KERNEL via inode_nohighmem(). This is not a problem for symlinks read from the backing device, because the __GFP_FS flag is dropped after inode_nohighmem() is called. However, when a new symlink is created with nilfs_symlink(), the gfp flags remain overwritten to GFP_KERNEL. Then, memory allocation called from page_symlink() etc. triggers memory reclamation including the FS layer, which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can cause a deadlock if they are called while nilfs->ns_segctor_sem is held: Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags of newly created symlinks in the same way that nilfs_new_inode() and __nilfs_read_inode() do, as a workaround until we adopt nofs allocation scope consistently or improve the locking constraints. Link: https://lkml.kernel.org/r/20241020050003.4308-1-konishi.ryusuke@gmail.com Fixes: 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9ef37ac20608f4836256 Tested-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 04:08:55 +0000