| Age | Commit message (Collapse) | Author |
|---|
|
platform
Headset Mic will no show at resume back.
This patch will fix this issue.
Fixes: d7f32791a9fc ("ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform")
Cc: <stable@vger.kernel.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/4713d48a372e47f98bba0c6120fd8254@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The bios version can differ depending if it is a dual-boot variant of the tablet.
Therefore another DMI match is required.
Signed-off-by: Alban Boyé <alban.boye@protonmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix a typo in the shift value used in madera_set_fll_clks.
Fixes: 3863857dd5ca3 ("ASoC: madera: Enable clocks for input pins when used for the FLL")
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240229114637.352098-1-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A few small fixes, some driver specific and one slightly larger one
from Richard which adds a new core helper and updates a small clutch of
drivers to deal with the fact that they were using a helper which
requires that the lock for the list of controls without holding that
lock. We also have some quirks for new AMD based Lenovo systems.
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
A couple of functions that use snd_card_ref() and *_unref() are also
cleaned up with a defined class, too.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-25-tiwai@suse.de
|
|
The setup_mutex in PCM oss code can be simplified with guard().
(params_lock is tough and not trivial to covert, though.)
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-24-tiwai@suse.de
|
|
Define guard() usage for PCM stream locking and use it in appropriate
places.
The pair of snd_pcm_stream_lock() and snd_pcm_stream_unlock() can be
presented with guard(pcm_stream_lock) now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-23-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-22-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-21-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-20-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-19-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-18-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-17-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-16-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-15-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-14-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-13-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-12-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-11-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
There are a few remaining explicit mutex and spinlock calls, and those
are the places where the temporary unlock/relocking happens -- which
guard() doens't cover well yet.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-10-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
The lops calls under multiple rwsems are factored out as a simple
macro, so that it can be called easily from snd_ctl_dev_register()
and snd_ctl_dev_disconnect().
There are a few remaining explicit rwsem and spinlock calls, and those
are the places where the lock downgrade happens or where the temporary
unlock/relocking happens -- which guard() doens't cover well yet.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-9-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-8-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-7-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
There are still a few remaining explicit mutex_lock/unlock calls, and
those are for the places where we do temporary unlock/relock, which
doesn't fit well with the guard(), so far.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-6-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-5-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
For making changes easier, some functions widen the application of
register_mutex, but those shouldn't influence on any actual
performance.
Also, one code block was factored out as a function so that guard()
can be applied cleanly without much indentation.
There are still a few remaining explicit spin_lock/unlock calls, and
those are for the places where we do temporary unlock/relock, which
doesn't fit well with the guard(), so far.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-4-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
The explicit mutex_lock/unlock are still seen only in
snd_compress_wait_for_drain() which does temporary unlock/relocking.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-3-tiwai@suse.de
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-2-tiwai@suse.de
|
|
There were a few sparse warnings about the cast of strong-typed
snd_pcm_format_t. Fix them with cast with __force.
For spreading the ugly mess, put them in the definitions
WRONG_FORMAT_1 and WRONG_FORMAT_2 and use them in the callers.
Fixes: 3e39acf56ede ("ALSA: core: Add sound core KUnit test")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202402270303.PmvmQrJV-lkp@intel.com
Link: https://lore.kernel.org/r/20240227104912.18921-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Like many other models, the Lenovo 21J2 (ThinkBook 16 G5+ APO)
needs a quirk entry for the internal microphone to function.
Signed-off-by: Jiawei Wang <me@jwang.link>
Link: https://msgid.link/r/20240228073914.232204-2-me@jwang.link
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Lenovo 21J2 (ThinkBook 16 G5+ APO) has this new variant,
as detected with lspci:
64:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD]
ACP/ACP3X/ACP6x Audio Coprocessor (rev 63)
Signed-off-by: Jiawei Wang <me@jwang.link>
Link: https://msgid.link/r/20240228073914.232204-1-me@jwang.link
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use FIELD_GET() and FIELD_PREP() helpers instead of doing it manually.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240227150826.573581-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cast u8 values to u32 when using them to build a 32-bit unsigned value
that is then stored in a u64. This avoids the possibility of a bad sign
extension where the u8 is implicitly extended to an int, thus changing it
from an unsigned to a signed value.
Whether this is a real problem is debatable, but it does no harm to
ensure that the u8 are cast to a suitable type for shifting.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Link: https://msgid.link/r/20240227100042.99-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It had pop noise from Headphone port when system reboot state.
If NID 58h Index 0x0 to fill default value, it will reduce pop noise.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/7493e207919a4fb3a0599324fd010e3e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Jerome Brunet <jbrunet@baylibre.com>:
This are various fixes and clean up gathered while working on Amlogic audio
support. These help better handle higher and unusual clock configuration
for TDM, SPDIF or PDM.
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The patchset may not cover all codecs found in the codecs/ directory -
noticed a possible improvement and grepped for similar pattern across C
files found in the directory. Those addressed here seem pretty
straightforward.
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
|
|
This patch adds Lenovo 21J0 (ThinkBook 16 G5+ ARP) to the DMI quirks table
to enable internal microphone array.
Cc: linux-sound@vger.kernel.org
Signed-off-by: Johnny Hsieh <mnixry@outlook.com>
Link: https://msgid.link/r/TYSPR04MB8429D62DFDB6727866ECF1DEC55A2@TYSPR04MB8429.apcprd04.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rate of the stream does not matter for the fifos of the axg family.
Fifos will just push or pull data to/from the DDR according to consumption
or production of the downstream element, which is the DPCM backend.
Drop the rate list and allow continuous rates. The lower and upper rate are
set according what is known to work with the different backends
This allows the PDM input backend to also use continuous rates.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-6-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use maximum width between 2 edges to setup spdifin thresholds
and detect the input sample rate. This comes from Amlogic SDK and
seems to be marginally more reliable than minimum width.
This is done to align with a future eARC support.
No issue was reported with minimum width so far, this is considered
to be an update so no Fixes tag is set.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-5-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC stopped using CBS_CFS and CBM_CFM a few years ago but the traces in
the amlogic tdm interface driver did not follow.
Update this to match the new format names
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to Amlogic datasheets for the SoCs supported by this driver, the
maximum bit clock rate is 100MHz.
The tdm interface allows the rates listed by the DAI driver, regardless of
the number slots or their width. However, these will impact the bit clock
rate.
Hitting the 100MHz limit is very unlikely for most use cases but it is
possible.
For example with 32 slots / 32 bits wide, the maximum rate is no longer
384kHz but ~96kHz.
Add the constraint accordingly if the component is not already active.
If it is active, the rate is already constrained by the first stream rate.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
By default, when mclk-fs is not provided, the tdm-interface driver
requests an MCLK that is 4x the bit clock, SCLK.
However there is no justification for this:
* If the codec needs MCLK for its operation, mclk-fs is expected to be set
according to the codec requirements.
* If the codec does not need MCLK the minimum is 2 * SCLK, because this is
minimum the divider between SCLK and MCLK can do.
Multiplying by 4 may cause problems because the PLL limit may be reached
sooner than it should, so use 2x instead.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Starting with Qualcomm SM8350 SoC, so Low Power Audio SubSystem (LPASS)
block version v9.2, the register responsible for TX SMIC MUXn muxes is
different. In earlier LPASS versions this mux had bit fields for
analogue (ADCn) and digital (SWR_DMICn) MICs. Choice of ADCn was
selecting the analogue path in CDC_TX_TOP_CSR_SWR_DMICn_CTL register.
With LPASS v9.2 and newer, the bit fields are integrated into just
SWR_MICn and there is no distinction for analogue or digital MIC in the
register.
Fix support for LPASS v9.2+:
1. Add new set of widgets and audio routes for LPASS v9.2.
2. Do not choose analogue or digital in CDC_TX_TOP_CSR_SWR_DMICn_CTL
based on value of the mux.
3. Replace all the input widgets (TX SWR_ADCn, TX SWR_DMICn) with TX
SWR_INPUTn ones.
The change is not backwards compatible with older DTBs and existing
mixer settings, therefore it does not change handling of older platforms
with working micrphones (SC8280xp) but only the ones with issues
(SM8450, SM8550) which need the fix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240226115925.53953-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TX macro codec differs slightly between different Qualcomm Low Power
Audio SubSystem (LPASS) block versions. In LPASS version 9.2 the
register responsible for TX SMIC MUXn muxes is different, thus to
properly support it, the driver needs to register different widgets per
different LPASS version.
Prepare for supporting this register difference by refactoring existing
code:
1. Move few widgets (TX SMIC MUXn, TX SWR_ADCn, TX SWR_DMICn) out of
common 'tx_macro_dapm_widgets[]' array to a new per-variant specific
array 'tx_macro_dapm_widgets_v9[]'.
2. Move also related audio routes into new array.
3. Store pointers to these variant-specific arrays in new variant-data
structure 'tx_macro_data'.
4. Add variant-specific widgets and routes in component probe, instead
of driver probe.
The change should have no real impact, except re-shuffling code and
registering some widgets and audio routes in component probe, instead of
driver probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240226115925.53953-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Lenovo Slim/Yoga Pro 9 14IRP8 requires a special fixup because there is
a collision of its PCI SSID (17aa:3802) with Lenovo Yoga DuetITL 2021
codec SSID.
Fixes: 3babae915f4c ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208555
Link: https://lore.kernel.org/all/d5b42e483566a3815d229270abd668131a0d9f3a.camel@irl.hu
Cc: stable@vger.kernel.org
Signed-off-by: Willian Wang <git@willian.wang>
Reviewed-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/170879111795.8.6687687359006700715.273812184@willian.wang
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Factory calibration of the speakers stores the calibration information
into an EFI variable.
This set of patches adds support for applying speaker calibration
data from that EFI variable.
The HDA patch (#5) depends on the ASoC patches #2 and #3
|
|
Add sam9x7 compatible in the DT documentation.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223172657.672439-1-varshini.rajendran@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add sam9x7 compatible to DT bindings documentation.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Link: https://lore.kernel.org/r/20240223172608.672190-1-varshini.rajendran@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If there are factory calibration settings in EFI, extract the
settings and write them to the firmware calibration controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If there are factory calibration settings in EFI, extract the
settings and write them to the firmware calibration controls.
This must be done after any firmware or coefficients have been
downloaded to the amp.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
