summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-27drm/radeon: add support for ASPM on evergreen asicsAlex Deucher
Enables PCIE ASPM (Active State Power Management) on evergreen-cayman asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: add accessors of pif_phy indirect register spaceAlex Deucher
Required for accessing certain pcie related registers. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: implement pcie gen2/3 support for SIAlex Deucher
If both the motherboard and GPU support pcie gen2 or 3, enable it. PCIE gen2 and 3 offer more bandwidth than pcie gen1. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: update radeon_atom_get_voltage_table() for SIAlex Deucher
SI uses a new atom table revision. Required for DPM on SI. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: update radeon_atom_is_voltage_gpio() for SIAlex Deucher
SI uses a new atom table. Required for DPM on SI. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/atom: add helper to calcuate mpll paramsAlex Deucher
There's a new table for calculating the memory pll parameters on SI. Required for SI DPM support. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: implement apci perf requestAlex Deucher
These functions use acpi methods to adjust the pcie gen speed. Used by DPM. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: remove local sumo_get_xclk()Alex Deucher
Use the new asic callback instead. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: add missing UVD clock set in cayman dpm codeAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: remove broken dyn state remnantsAlex Deucher
Now that the proper fix has been implemented I can remove the last remnants of the initial implementation. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: add pre/post_set_power_state callback (cayman)Alex Deucher
This properly implemented dynamic state adjustment by using a working copy of the requested and current power states. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: add pre/post_set_power_state callback (BTC)Alex Deucher
This properly implemented dynamic state adjustment by using a working copy of the requested and current power states. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: add pre/post_set_power_state callback (TN)Alex Deucher
This properly implemented dynamic state adjustment by using a working copy of the requested and current power states. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: add pre/post_set_power_state callback (sumo)Alex Deucher
This properly implemented dynamic state adjustment by using a working copy of the requested and current power states. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: add pre/post_set_power_state callbacks (6xx-eg)Alex Deucher
For r6xx-evergreen, they are no-ops as they don't support any dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: add new pre/post_set_power_state callbacksAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/tn: restructure codeAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/sumo: restructure codeAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/cayman: restructure codeAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/btc: restructure codeAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/evergreen: restructure codeAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/rv7xx: restructure codeAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/rv6xx: restructure codeAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/rs780: restructure codeAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for cayman (v5)Alex Deucher
This adds dpm support for cayman asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching (requires additional acpi support) - power containment - shader power scaling Set radeon.dpm=1 to enable. v2: fold in tdp fix v3: fix indentation v4: fix 64 bit div v5: attempt to fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2013-06-27drm/radeon/dpm: fixup dynamic state adjust for btc (v2)Alex Deucher
Use a dedicated copy of the current power state since we may have to adjust it on the fly. v2: fix up redundant state sets Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: fixup dynamic state adjust for TNAlex Deucher
Use a dedicated copy of the current power state since we may have to adjust it on the fly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: fixup dynamic state adjust for sumoAlex Deucher
Use a dedicated copy of the current power state since we may have to adjust it on the fly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: track whether we are on AC or batteryAlex Deucher
Driver needs this information to validate power states. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: add helpers for extended power tables (v2)Alex Deucher
This data will be needed for dpm on newer asics. v2: fix typo in rebase Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: enable UVD as needed (v9)Alex Deucher
When using UVD, the driver must switch to a special UVD power state. In the CS ioctl, switch to the power state and schedule work to change the power state back, when the work comes up, check if uvd is still busy and if not, switch back to the user state, otherwise, reschedule the work. Note: We really need some better way to decide when to switch out of the uvd power state. Switching power states while playback is active make uvd angry. V2: fix locking. V3: switch from timer to delayed work V4: check fence driver for UVD jobs, reduce timeout to 1 second and rearm timeout on activity v5: rebase on new dpm tree v6: rebase on interim uvd on demand changes v7: fix UVD when DPM is disabled v8: unify non-DPM and DPM UVD handling v9: remove leftover idle work struct Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <deathsimple@vodafone.de>
2013-06-27drm/radeon: add dpm UVD handling for TN asics (v2)Alex Deucher
v2: fix typo noticed by Dan Carpenter Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: add dpm UVD handling for sumo asicsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: add dpm UVD handling for evergreen/btc asicsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: add dpm UVD handling for r7xx asicsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: let atom control display phy powergatingAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for trinity asicsAlex Deucher
This adds dpm support for trinity asics. This includes: - clockgating - powergating - dynamic engine clock scaling - dynamic voltage scaling set radeon.dpm=1 to enable it. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for sumo asics (v2)Alex Deucher
This adds dpm support for sumo asics. This includes: - clockgating - powergating - dynamic engine clock scaling - dynamic voltage scaling set radeon.dpm=1 to enable it. v2: fix indention Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2013-06-27drm/radeon/kms: add dpm support for btc (v3)Alex Deucher
This adds dpm support for btc asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching (requires additional acpi support) Set radeon.dpm=1 to enable. v2: reduce stack usage v3: attempt to fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for evergreen (v4)Alex Deucher
This adds dpm support for evergreen asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching (requires additional acpi support) Set radeon.dpm=1 to enable. v2: reduce stack usage, rename ulv struct v3: fix thermal interrupt check notices by Jerome v4: fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for rv7xx (v4)Alex Deucher
This adds dpm support for rv7xx asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching Set radeon.dpm=1 to enable. v2: reduce stack usage v3: fix 64 bit div v4: fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-28drm/qxl: add support for cursor hotspot.Dave Airlie
This uses the cursor hotspot info from userspace and passes it to the qxl hw layer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm: add hotspot support for cursors.Dave Airlie
So it looks like for virtual hw cursors on QXL we need to inform the "hw" device what the cursor hotspot parameters are. This makes sense if you think the host has to draw the cursor and interpret clicks from it. However the current modesetting interface doesn't support passing the hotspot information from userspace. This implements a new cursor ioctl, that takes the hotspot info as well, userspace can try calling the new interface and if it gets -ENOSYS it means its on an older kernel and can just fallback. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: Clear bits of register we're going to set.Pantelis Antoniou
Bits weren't cleared so resolution changes didn't work. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc fixing i2c/slave initialization raceDarren Etheridge
In certain senarios drm will initialize before i2c this means that i2c slave devices like the nxp tda998x will fail to be probed. This patch detects this condition then defers the probe of the slave device and the tilcdc main driver. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: whitespace fixes and tidyupDarren Etheridge
keeping checkpatch happy. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: adding more guards to prevent selection of invalid modesDarren Etheridge
The tilcdc has a number of limitations for the allowed sizes of the various adjustable timing parameter. Some modes are outside of these timings. This commit will prune modes that report timings that will overflow the allowed sizes in the tilcdc. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: fixing off by one errors found on analyzerDarren Etheridge
When hooking up to an HDMI analyzer noticed some timings were off by one. Referring to the hardware technical reference manual for the lcd controller some of the timing registers use 0 to represent 1. This patch addresses that issue. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: adding some more devicetree configDarren Etheridge
Adding support for max-pixelclock and max-width device tree entries. As some devices that use the tilcdc hardware module have restrictions on the allowed/tested values. Also update DT bindings document to reflect new parameters. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: support pixel widths greater than 1024Darren Etheridge
TI LCD controller version 2 has an extended eleventh bit that enables horizontal resolutions greater than 1024 pixels to be specified (upto 2048). This patch adds support for setting this bit on LCDC V2. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 22:52:00 +0000