summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-09drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phyWangyan Wang
This is the third step to make MT2701 HDMI stable. We should not change the rate of parent for hdmi phy when doing round_rate for this clock. The parent clock of hdmi phy must be the same as it. We change it when doing set_rate only. Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-04-09drm/mediatek: using new factor for tvdpll for MT2701 hdmi phyWangyan Wang
This is the second step to make MT2701 HDMI stable. The factor depends on the divider of DPI in MT2701, therefore, we should fix this factor to the right and new one. Test: search ok Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-04-09drm/mediatek: remove flag CLK_SET_RATE_PARENT for MT2701 hdmi phyWangyan Wang
This is the first step to make MT2701 hdmi stable. The parent rate of hdmi phy had set by DPI driver. We should not set or change the parent rate of MT2701 hdmi phy, as a result we should remove the flags of "CLK_SET_RATE_PARENT" from the clock of MT2701 hdmi phy. Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-04-09drm/mediatek: make implementation of recalc_rate() for MT2701 hdmi phyWangyan Wang
Recalculate the rate of this clock, by querying hardware to make implementation of recalc_rate() to match the definition. Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-04-09drm/mediatek: fix the rate and divder of hdmi phy for MT2701Wangyan Wang
Due to a clerical error,there is one zero less for 12800000. Fix it for 128000000 Fixes: 0fc721b2968e ("drm/mediatek: add hdmi driver for MT2701 and MT7623") Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-04-09ACPICA: Namespace: remove address node from global list after method terminationErik Schmauss
ACPICA commit b233720031a480abd438f2e9c643080929d144c3 ASL operation_regions declare a range of addresses that it uses. In a perfect world, the range of addresses should be used exclusively by the AML interpreter. The OS can use this information to decide which drivers to load so that the AML interpreter and device drivers use different regions of memory. During table load, the address information is added to a global address range list. Each node in this list contains an address range as well as a namespace node of the operation_region. This list is deleted at ACPI shutdown. Unfortunately, ASL operation_regions can be declared inside of control methods. Although this is not recommended, modern firmware contains such code. New module level code changes unintentionally removed the functionality of adding and removing nodes to the global address range list. A few months ago, support for adding addresses has been re- implemented. However, the removal of the address range list was missed and resulted in some systems to crash due to the address list containing bogus namespace nodes from operation_regions declared in control methods. In order to fix the crash, this change removes dynamic operation_regions after control method termination. Link: https://github.com/acpica/acpica/commit/b2337200 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475 Fixes: 4abb951b73ff ("ACPICA: AML interpreter: add region addresses in global list during initialization") Reported-by: Michael J Gruber <mjg@fedoraproject.org> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09drm/mediatek: fix possible object reference leakWen Yang
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/mediatek/mtk_hdmi.c:1521:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. drivers/gpu/drm/mediatek/mtk_hdmi.c:1524:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-04-08drm/i915: Get power refs in encoder->get_power_domains()Imre Deak
Push getting the reference for the encoders' power domains into the encoder get_power_domains() hook instead of doing this from the caller. This way the encoder can store away the corresponding wakerefs. This fixes the DSI encoder disabling, which didn't release these power references it acquired during HW state readout. Note that longtime ownership for the corresponding wakerefs can be thus acquired / released in two ways. Nevertheless there is always only one owner for them: After HW readout (booting/system resume): - encoder->get_power_domains() acquires - encoder->disable*() releases After a modeset (calling intel_atomic_commit()): - encoder->enable*() acquires - encoder->disable*() releases * can be any of the encoder enable/disable hooks. v2: - Check that the DSI io_wakerefs are unset both during encoder HW readout and enabling. (Chris) Fixes: 0e6e0be4c9523 ("drm/i915: Markup paired operations on display power domains") Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190407124655.31536-1-imre.deak@intel.com (cherry picked from commit 3a52fb7e7953f0b13df8c05d0d74b56a66888f30) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Off by one and bounds checking fixes in NFC, from Dan Carpenter. 2) There have been many weird regressions in r8169 since we turned ASPM support on, some are still not understood nor completely resolved. Let's turn this back off for now. From Heiner Kallweit. 3) Signess fixes for ethtool speed value handling, from Michael Zhivich. 4) Handle timestamps properly in macb driver, from Paul Thomas. 5) Two erspan fixes, it's the usual "skb ->data potentially reallocated and we're holding a stale protocol header pointer". From Lorenzo Bianconi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: bnxt_en: Reset device on RX buffer errors. bnxt_en: Improve RX consumer index validity check. net: macb driver, check for SKBTX_HW_TSTAMP qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant ethtool: avoid signed-unsigned comparison in ethtool_validate_speed() net: ip6_gre: fix possible use-after-free in ip6erspan_rcv net: ip_gre: fix possible use-after-free in erspan_rcv r8169: disable ASPM again MAINTAINERS: ieee802154: update documentation file pattern net: vrf: Fix ping failed when vrf mtu is set to 0 selftests: add a tc matchall test case nfc: nci: Potential off by one in ->pipes[] array NFC: nci: Add some bounds checking in nci_hci_cmd_received()
2019-04-08Merge branch 'fixes-v5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM fixes from James Morris: "From Jarkko: These are critical fixes for v5.1. Contains also couple of new selftests for v5.1 features (partial reads in /dev/tpm0)" * 'fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selftests/tpm2: Open tpm dev in unbuffered mode selftests/tpm2: Extend tests to cover partial reads KEYS: trusted: fix -Wvarags warning tpm: Fix the type of the return value in calc_tpm2_event_size() KEYS: trusted: allow trusted.ko to initialize w/o a TPM tpm: fix an invalid condition in tpm_common_poll tpm: turn on TPM on suspend for TPM 1.x
2019-04-08Merge tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull xtensa fixes from Max Filippov: - fix syscall number passed to trace_sys_exit - fix syscall number initialization in start_thread - fix level interpretation in the return_address - fix format string warning in init_pmd * tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix format string warning in init_pmd xtensa: fix return_address xtensa: fix initialization of pt_regs::syscall in start_thread xtensa: use actual syscall number in do_syscall_trace_leave
2019-04-08scsi: csiostor: fix missing data copy in csio_scsi_err_handler()Varun Prakash
If scsi cmd sglist is not suitable for DDP then csiostor driver uses preallocated buffers for DDP, because of this data copy is required from DDP buffer to scsi cmd sglist before calling ->scsi_done(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08Merge branch 'bnxt_en-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: 2 bug fixes. The first patch prevents possible driver crash if we get a bad RX index from the hardware. The second patch resets the device when the hardware reports buffer error to recover from the error. Please queue these for -stable also. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08bnxt_en: Reset device on RX buffer errors.Michael Chan
If the RX completion indicates RX buffers errors, the RX ring will be disabled by firmware and no packets will be received on that ring from that point on. Recover by resetting the device. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08bnxt_en: Improve RX consumer index validity check.Michael Chan
There is logic to check that the RX/TPA consumer index is the expected index to work around a hardware problem. However, the potentially bad consumer index is first used to index into an array to reference an entry. This can potentially crash if the bad consumer index is beyond legal range. Improve the logic to use the consumer index for dereferencing after the validity check and log an error message. Fixes: fa7e28127a5a ("bnxt_en: Add workaround to detect bad opaque in rx completion (part 2)") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: macb driver, check for SKBTX_HW_TSTAMPPaul Thomas
Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been enabled for this skb. It does fix the issue where normal socks that aren't expecting a timestamp will not wake up on select, but when a user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work. Signed-off-by: Paul Thomas <pthomas8589@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08Merge branch 'ethtool-fix-use-of-SPEED_UNKNOWN-constant'David S. Miller
Michael Zhivich says: ==================== ethtool: fix use of SPEED_UNKNOWN constant This patch series addresses 2 related issues: 1. ethtool_validate_speed() triggers a "signed-unsigned comparison" warning due to type difference of SPEED_UNKNOWN constant (int) and argument to ethtool_validate_speed (__u32). 2. some drivers use u16 storage for SPEED_UNKNOWN constant, resulting in value truncation and thus failure to test against SPEED_UNKNOWN correctly. This revised series addresses several feedback comments: - split up the patch in to series - do not unnecessarily change drivers that use "int" storage for speed values ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich
qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich
tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08ethtool: avoid signed-unsigned comparison in ethtool_validate_speed()Michael Zhivich
When building C++ userspace code that includes ethtool.h with "-Werror -Wall", g++ complains about signed-unsigned comparison in ethtool_validate_speed() due to definition of SPEED_UNKNOWN as -1. Explicitly cast SPEED_UNKNOWN to __u32 to match type of ethtool_validate_speed() argument. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08Merge branch 'erspan-use-after-free'David S. Miller
Lorenzo Bianconi says: ==================== fix possible use-after-free in erspan_v{4,6} Similar to what I did in commit bb9bd814ebf0 ("ipv6: sit: reset ip header pointer in ipip6_rcv"), fix possible use-after-free in erspan_rcv and ip6erspan_rcv extracting tunnel metadata since the packet can be 'uncloned' running __iptunnel_pull_header ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: ip6_gre: fix possible use-after-free in ip6erspan_rcvLorenzo Bianconi
erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove erspan header. This can determine a possible use-after-free accessing pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: ip_gre: fix possible use-after-free in erspan_rcvLorenzo Bianconi
erspan tunnels run __iptunnel_pull_header on received skbs to remove gre and erspan headers. This can determine a possible use-after-free accessing pkt_md pointer in erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08selftests/tpm2: Open tpm dev in unbuffered modeTadeusz Struk
In order to have control over how many bytes are read or written the device needs to be opened in unbuffered mode. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08selftests/tpm2: Extend tests to cover partial readsTadeusz Struk
Three new tests added: 1. Send get random cmd, read header in 1st read, read the rest in second read - expect success 2. Send get random cmd, read only part of the response, send another get random command, read the response - expect success 3. Send get random cmd followed by another get random cmd, without reading the first response - expect the second cmd to fail with -EBUSY Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08KEYS: trusted: fix -Wvarags warningndesaulniers@google.com
Fixes the warning reported by Clang: security/keys/trusted.c:146:17: warning: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Wvarargs] va_start(argp, h3); ^ security/keys/trusted.c:126:37: note: parameter of type 'unsigned char' is declared here unsigned char *h2, unsigned char h3, ...) ^ Specifically, it seems that both the C90 (4.8.1.1) and C11 (7.16.1.4) standards explicitly call this out as undefined behavior: The parameter parmN is the identifier of the rightmost parameter in the variable parameter list in the function definition (the one just before the ...). If the parameter parmN is declared with ... or with a type that is not compatible with the type that results after application of the default argument promotions, the behavior is undefined. Link: https://github.com/ClangBuiltLinux/linux/issues/41 Link: https://www.eskimo.com/~scs/cclass/int/sx11c.html Suggested-by: David Laight <David.Laight@aculab.com> Suggested-by: Denis Kenzior <denkenz@gmail.com> Suggested-by: James Bottomley <jejb@linux.vnet.ibm.com> Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: Fix the type of the return value in calc_tpm2_event_size()Yue Haibing
calc_tpm2_event_size() has an invalid signature because it returns a 'size_t' where as its signature says that it returns 'int'. Cc: <stable@vger.kernel.org> Fixes: 4d23cc323cdb ("tpm: add securityfs support for TPM 2.0 firmware event log") Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08KEYS: trusted: allow trusted.ko to initialize w/o a TPMJarkko Sakkinen
Allow trusted.ko to initialize w/o a TPM. This commit also adds checks to the exported functions to fail when a TPM is not available. Fixes: 240730437deb ("KEYS: trusted: explicitly use tpm_chip structure...") Cc: James Morris <jmorris@namei.org> Reported-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: fix an invalid condition in tpm_common_pollTadeusz Struk
The poll condition should only check response_length, because reads should only be issued if there is data to read. The response_read flag only prevents double writes. The problem was that the write set the response_read to false, enqued a tpm job, and returned. Then application called poll which checked the response_read flag and returned EPOLLIN. Then the application called read, but got nothing. After all that the async_work kicked in. Added also mutex_lock around the poll check to prevent other possible race conditions. Fixes: 9488585b21bef0df12 ("tpm: add support for partial reads") Reported-by: Mantas Mikulėnas <grawity@gmail.com> Tested-by: Mantas Mikulėnas <grawity@gmail.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: turn on TPM on suspend for TPM 1.xJarkko Sakkinen
tpm_chip_start/stop() should be also called for TPM 1.x devices on suspend. Add that functionality back. Do not lock the chip because it is unnecessary as there are no multiple threads using it when doing the suspend. Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Reported-by: Paul Zimmerman <pauldzim@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08r8169: disable ASPM againHeiner Kallweit
There's a significant number of reports that re-enabling ASPM causes different issues, ranging from decreased performance to system not booting at all. This affects only a minority of users, but the number of affected users is big enough that we better switch off ASPM again. This will hurt notebook users who are not affected by the issues, they may see decreased battery runtime w/o ASPM. With the PCI core folks is being discussed to add generic sysfs attributes to control ASPM. Once this is in place brave enough users can re-enable ASPM on their system. Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08virtio: Honour 'may_reduce_num' in vring_create_virtqueueCornelia Huck
vring_create_virtqueue() allows the caller to specify via the may_reduce_num parameter whether the vring code is allowed to allocate a smaller ring than specified. However, the split ring allocation code tries to allocate a smaller ring on allocation failure regardless of what the caller specified. This may cause trouble for e.g. virtio-pci in legacy mode, which does not support ring resizing. (The packed ring code does not resize in any case.) Let's fix this by bailing out immediately in the split ring code if the requested size cannot be allocated and may_reduce_num has not been specified. While at it, fix a typo in the usage instructions. Fixes: 2a2d1382fe9d ("virtio: Add improved queue allocation API") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com>
2019-04-08MAINTAINERS: ieee802154: update documentation file patternStefan Schmidt
When moving the documentation for the ieee802154 subsystem from plain text to rst the file pattern in the MAINTAINERS file got wrong. Updating it here to fix scripts using this file. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08arm64: backtrace: Don't bother trying to unwind the userspace stackWill Deacon
Calling dump_backtrace() with a pt_regs argument corresponding to userspace doesn't make any sense and our unwinder will simply print "Call trace:" before unwinding the stack looking for user frames. Rather than go through this song and dance, just return early if we're passed a user register state. Cc: <stable@vger.kernel.org> Fixes: 1149aad10b1e ("arm64: Add dump_backtrace() in show_regs") Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08io_uring: restrict IORING_SETUP_SQPOLL to rootJens Axboe
This options spawns a kernel side thread that will poll for submissions (and completions, if IORING_SETUP_IOPOLL is set). As this allows a user to potentially use more cycles outside of the normal hierarchy, restrict the use of this feature to root. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08tools/io_uring: remove IOCQE_FLAG_CACHEHITJens Axboe
This ended up not being included in the mainline version of io_uring, so drop it from the test app as well. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08RDMA/hns: Bugfix for SCC hem freeYangyang Li
The method of hem free for SCC context is different from qp context. In the current version, if free SCC hem during the execution of qp free, there may be smmu error as below: arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.1.auto: 0x00007d0000000010 arm-smmu-v3 arm-smmu-v3.1.auto: 0x000012000000017c arm-smmu-v3 arm-smmu-v3.1.auto: 0x00000000000009e0 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000000 As SCC context is still used by hardware after qp free, we can solve this problem by removing SCC hem free from hns_roce_qp_free. Fixes: 6a157f7d1b14 ("RDMA/hns: Add SCC context allocation support for hip08") Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA/hns: Fix bug that caused srq creation to failLijun Ou
Due to the incorrect use of the seg and obj information, the position of the mtt is calculated incorrectly, and the free space of the page is not enough to store the entire mtt, resulting in access to the next page. This patch fixes this problem. Unable to handle kernel paging request at virtual address ffff00006e3cd000 ... Call trace: hns_roce_write_mtt+0x154/0x2f0 [hns_roce] hns_roce_buf_write_mtt+0xa8/0xd8 [hns_roce] hns_roce_create_srq+0x74c/0x808 [hns_roce] ib_create_srq+0x28/0xc8 Fixes: 0203b14c4f32 ("RDMA/hns: Unify the calculation for hem index in hip08") Signed-off-by: chenglang <chenglang@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA/vmw_pvrdma: Fix memory leak on pvrdma_pci_removeKamal Heib
Make sure to free the DSR on pvrdma_pci_remove() to avoid the memory leak. Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08arm64/ftrace: fix inadvertent BUG() in trampoline checkArd Biesheuvel
The ftrace trampoline code (which deals with modules loaded out of BL range of the core kernel) uses plt_entries_equal() to check whether the per-module trampoline equals a zero buffer, to decide whether the trampoline has already been initialized. This triggers a BUG() in the opcode manipulation code, since we end up checking the ADRP offset of a 0x0 opcode, which is not an ADRP instruction. So instead, add a helper to check whether a PLT is initialized, and call that from the frace code. Cc: <stable@vger.kernel.org> # v5.0 Fixes: bdb85cd1d206 ("arm64/module: switch to ADRP/ADD sequences for PLT entries") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08drm/i915: Fix pipe_bpp readout for BXT/GLK DSIVille Syrjälä
The only bpc information in pipe registers for BXT/GLK DSI is the PIPEMISC dither bpc. Let's try to use that to read out pipe_bpp on these platforms. However, I'm not sure if this will be correctly populated by the GOP since bspec suggests it's only needed if dithering is actually enabled. If not I guess we'll have to go one step further and extract pipe_bpp from the DSI pixel format when dithering is disabled. Cc: Hans de Goede <hdegoede@redhat.com> Fixes: ca0b04db14a5 ("drm/i915/dsi: Fix pipe_bpp for handling for 6 bpc pixel-formats") References: https://bugs.freedesktop.org/show_bug.cgi?id=109516 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190405141349.11950-1-ville.syrjala@linux.intel.com (cherry picked from commit 499653501baf27d26e73cb5ce744869df3400509) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-04-08drm/amd/display: Fix negative cursor pos programming (v2)Nicholas Kazlauskas
[Why] If the cursor pos passed from DM is less than the plane_state->dst_rect top left corner then the unsigned cursor pos wraps around to a large positive number since cursor pos is a u32. There was an attempt to guard against this in hubp1_cursor_set_position by checking the src_x_offset and src_y_offset and offseting the cursor hotspot within hubp1_cursor_set_position. However, the cursor position itself is still being programmed incorrectly as a large value. This manifests itself visually as the cursor disappearing or containing strange artifacts near the middle of the screen on raven. [How] Don't subtract the destination rect top left corner from the pos but add it to the hotspot instead. This happens before the pos gets passed into hubp1_cursor_set_position. This achieves the same result but avoids the subtraction wrap around. With this fix the original cursor programming logic can be used again. v2: add hunk that got dropped accidently when this patch was originally committed. (Alex) Fixes: 0921c41e1902831 ("drm/amd/display: Fix negative cursor pos programming") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Murton Liu <Murton.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-08block: don't use for-inside-for in bio_for_each_segment_allMing Lei
Commit 6dc4f100c175 ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec") changes bio_for_each_segment_all() to use for-inside-for. This way breaks all bio_for_each_segment_all() call with error out branch via 'break', since now 'break' can only break from the inner loop. Fixes this issue by implementing bio_for_each_segment_all() via single 'for' loop, and now the logic is very similar with normal bvec iterator. Cc: Qu Wenruo <quwenruo.btrfs@gmx.com> Cc: linux-btrfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: Omar Sandoval <osandov@fb.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-and-Tested-by: Qu Wenruo <quwenruo.btrfs@gmx.com> Fixes: 6dc4f100c175 ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08MAiNTAINERS: add Paolo, Stefan for virtio blk/scsiMichael S. Tsirkin
Jason doesn't really have the time to review blk/scsi patches. Paolo and Setfan agreed to help out. Thanks guys! Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-04-08virtio_pci: fix a NULL pointer reference in vp_del_vqsLongpeng
If the msix_affinity_masks is alloced failed, then we'll try to free some resources in vp_free_vectors() that may access it directly. We met the following stack in our production: [ 29.296767] BUG: unable to handle kernel NULL pointer dereference at (null) [ 29.311151] IP: [<ffffffffc04fe35a>] vp_free_vectors+0x6a/0x150 [virtio_pci] [ 29.324787] PGD 0 [ 29.333224] Oops: 0000 [#1] SMP [...] [ 29.425175] RIP: 0010:[<ffffffffc04fe35a>] [<ffffffffc04fe35a>] vp_free_vectors+0x6a/0x150 [virtio_pci] [ 29.441405] RSP: 0018:ffff9a55c2dcfa10 EFLAGS: 00010206 [ 29.453491] RAX: 0000000000000000 RBX: ffff9a55c322c400 RCX: 0000000000000000 [ 29.467488] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9a55c322c400 [ 29.481461] RBP: ffff9a55c2dcfa20 R08: 0000000000000000 R09: ffffc1b6806ff020 [ 29.495427] R10: 0000000000000e95 R11: 0000000000aaaaaa R12: 0000000000000000 [ 29.509414] R13: 0000000000010000 R14: ffff9a55bd2d9e98 R15: ffff9a55c322c400 [ 29.523407] FS: 00007fdcba69f8c0(0000) GS:ffff9a55c2840000(0000) knlGS:0000000000000000 [ 29.538472] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.551621] CR2: 0000000000000000 CR3: 000000003ce52000 CR4: 00000000003607a0 [ 29.565886] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.580055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.594122] Call Trace: [ 29.603446] [<ffffffffc04fe8a2>] vp_request_msix_vectors+0xe2/0x260 [virtio_pci] [ 29.618017] [<ffffffffc04fedc5>] vp_try_to_find_vqs+0x95/0x3b0 [virtio_pci] [ 29.632152] [<ffffffffc04ff117>] vp_find_vqs+0x37/0xb0 [virtio_pci] [ 29.645582] [<ffffffffc057bf63>] init_vq+0x153/0x260 [virtio_blk] [ 29.658831] [<ffffffffc057c1e8>] virtblk_probe+0xe8/0x87f [virtio_blk] [...] Cc: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng <longpeng2@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2019-04-08ALSA: hda - Add two more machines to the power_save_blacklistHui Wang
Recently we set CONFIG_SND_HDA_POWER_SAVE_DEFAULT to 1 when configuring the kernel, then two machines were reported to have noise after installing the new kernel. Put them in the blacklist, the noise disappears. https://bugs.launchpad.net/bugs/1821663 Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-08powerpc/64s/radix: Fix radix segment exception handlingNicholas Piggin
Commit 48e7b76957 ("powerpc/64s/hash: Convert SLB miss handlers to C") broke the radix-mode segment exception handler. In radix mode, this is exception is not an SLB miss, rather it signals that the EA is outside the range translated by any page table. The commit lost the radix feature alternate code patch, which can cause faults to some EAs to kernel BUG at arch/powerpc/mm/slb.c:639! The original radix code would send faults to slb_miss_large_addr, which would end up faulting due to slb_addr_limit being 0. This patch sends radix directly to do_bad_slb_fault, which is a bit clearer. Fixes: 48e7b7695745 ("powerpc/64s/hash: Convert SLB miss handlers to C") Cc: stable@vger.kernel.org # v4.20+ Reported-by: Anton Blanchard <anton@samba.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-08drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in ↵Ondrej Jirman
sun8i_tcon_top_un/bind There are two problems here: 1. Not all clk_data->hws[] need to be initialized, depending on various configured quirks. This leads to NULL ptr deref in clk_hw_unregister_gate() in sun8i_tcon_top_unbind() 2. If there is error when registering the clk_data->hws[], err_unregister_gates error path will try to unregister IS_ERR()=true (invalid) pointer. For problem (1) I have this stack trace: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: clk_hw_unregister+0x8/0x18 clk_hw_unregister_gate+0x14/0x28 sun8i_tcon_top_unbind+0x2c/0x60 component_unbind.isra.4+0x2c/0x50 component_bind_all+0x1d4/0x230 sun4i_drv_bind+0xc4/0x1a0 try_to_bring_up_master+0x164/0x1c0 __component_add+0xa0/0x168 component_add+0x10/0x18 sun8i_dw_hdmi_probe+0x18/0x20 platform_drv_probe+0x3c/0x70 really_probe+0xcc/0x278 driver_probe_device+0x34/0xa8 Problem (2) was identified by head scratching. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190405233048.3823-1-megous@megous.com
2019-04-08Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard
We haven't backmerged for a while and this creates some coherency issues across DRM drivers. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-08ASoC: pcm: update module refcount if module_get_upon_open is setRanjani Sridharan
Setting the module_get_upon_open field for component driver prevents the module refcount from being incremented during component probe(). This could lead to the module being allowed to be unloaded when a pcm stream is open. So, if this field is set, the module's refcount should be incremented during pcm open to prevent module removal when the component is in use. And, the refcount should be decremented upon pcm close. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 07:43:43 +0000