summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-20ACPI: Make PCI slot detection driver depend on PCISinan Kaya
Since this is ACPI PCI slot detection driver for PCI, it doesn't make sense to compile this without PCI support in place. Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not setSinan Kaya
Remove PCI dependent code out of iort.c when CONFIG_PCI is not defined. A quick search reveals the following functions: 1. pci_request_acs() 2. pci_domain_nr() 3. pci_is_root_bus() 4. to_pci_dev() Both pci_domain_nr() and pci_is_root_bus() are defined in linux/pci.h. pci_domain_nr() is a stub function when CONFIG_PCI is not set and pci_is_root_bus() just returns a reference to a structure member which is still valid without CONFIG_PCI set. to_pci_dev() is a macro that expands to container_of. pci_request_acs() is the only code that gets pulled in from drivers/pci/*.c Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20arm64: select ACPI PCI code only when both features are enabledSinan Kaya
ACPI and PCI are no longer coupled to each other. Specify requirements for both when pulling in code. Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20PCI/ACPI: Allow ACPI to be built without CONFIG_PCI setSinan Kaya
We are compiling PCI code today for systems with ACPI and no PCI device present. Remove the useless code and reduce the tight dependency. Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unsetSinan Kaya
Allow ACPI to be built without PCI support in place. Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20ACPI: Allow CONFIG_PCI to be unset for rebootSinan Kaya
Make PCI reboot conditional on CONFIG_PCI set on the kernel configuration. Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20ACPI: Move PCI reset to a separate functionSinan Kaya
Getting ready to factor out PCI specific code when CONFIG_PCI is unset. Create a acpi_pci_reset() that kick starts PCI specific reset. Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Off by one in netlink parsing of mac802154_hwsim, from Alexander Aring. 2) nf_tables RCU usage fix from Taehee Yoo. 3) Flow dissector needs nhoff and thoff clamping, from Stanislav Fomichev. 4) Missing sin6_flowinfo initialization in SCTP, from Xin Long. 5) Spectrev1 in ipmr and ip6mr, from Gustavo A. R. Silva. 6) Fix r8169 crash when DEBUG_SHIRQ is enabled, from Heiner Kallweit. 7) Fix SKB leak in rtlwifi, from Larry Finger. 8) Fix state pruning in bpf verifier, from Jakub Kicinski. 9) Don't handle completely duplicate fragments as overlapping, from Michal Kubecek. 10) Fix memory corruption with macb and 64-bit DMA, from Anssi Hannula. 11) Fix TCP fallback socket release in smc, from Myungho Jung. 12) gro_cells_destroy needs to napi_disable, from Lorenzo Bianconi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (130 commits) rds: Fix warning. neighbor: NTF_PROXY is a valid ndm_flag for a dump request net: mvpp2: fix the phylink mode validation net/sched: cls_flower: Remove old entries from rhashtable net/tls: allocate tls context using GFP_ATOMIC iptunnel: make TUNNEL_FLAGS available in uapi gro_cell: add napi_disable in gro_cells_destroy lan743x: Remove MAC Reset from initialization net/mlx5e: Remove the false indication of software timestamping support net/mlx5: Typo fix in del_sw_hw_rule net/mlx5e: RX, Fix wrong early return in receive queue poll ipv6: explicitly initialize udp6_addr in udp_sock_create6() bnxt_en: Fix ethtool self-test loopback. net/rds: remove user triggered WARN_ON in rds_sendmsg net/rds: fix warn in rds_message_alloc_sgs ath10k: skip sending quiet mode cmd for WCN3990 mac80211: free skb fraglist before freeing the skb nl80211: fix memory leak if validate_pae_over_nl80211() fails net/smc: fix TCP fallback socket release vxge: ensure data0 is initialized in when fetching firmware version information ...
2018-12-20drm/ioctl: Fix Spectre v1 vulnerabilitiesGustavo A. R. Silva
nr is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/drm_ioctl.c:805 drm_ioctl() warn: potential spectre issue 'dev->driver->ioctls' [r] drivers/gpu/drm/drm_ioctl.c:810 drm_ioctl() warn: potential spectre issue 'drm_ioctls' [r] (local cap) drivers/gpu/drm/drm_ioctl.c:892 drm_ioctl_flags() warn: potential spectre issue 'drm_ioctls' [r] (local cap) Fix this by sanitizing nr before using it to index dev->driver->ioctls and drm_ioctls. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181220000015.GA18973@embeddedor
2018-12-19rds: Fix warning.David S. Miller
>> net/rds/send.c:1109:42: warning: Using plain integer as NULL pointer Fixes: ea010070d0a7 ("net/rds: fix warn in rds_message_alloc_sgs") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fix from Michael Tsirkin: "A last-minute fix for a test build" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: fix test build after uio.h change
2018-12-19Merge tag 'nfs-for-4.20-6' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Fix TCP socket disconnection races by ensuring we always call xprt_disconnect_done() after releasing the socket. - Fix a race when clearing both XPRT_CONNECTING and XPRT_LOCKED - Remove xprt_connect_status() so it does not mask errors that should be handled by call_connect_status() * tag 'nfs-for-4.20-6' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Remove xprt_connect_status() SUNRPC: Fix a race with XPRT_CONNECTING SUNRPC: Fix disconnection races
2018-12-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: - One nasty use-after-free bugfix, from this merge window however - A less nasty use-after-free that can only zero some words at the beginning of the page, and hence is not really exploitable - A NULL pointer dereference - A dummy implementation of an AMD chicken bit MSR that Windows uses for some unknown reason * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: Add AMD's EX_CFG to the list of ignored MSRs KVM: X86: Fix NULL deref in vcpu_scan_ioapic KVM: Fix UAF in nested posted interrupt processing KVM: fix unregistering coalesced mmio zone from wrong bus
2018-12-19Merge tag 'dma-mapping-4.20-4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fix from Christoph Hellwig: "Fix a regression in dma-direct that didn't take account the magic AMD memory encryption mask in the DMA address" * tag 'dma-mapping-4.20-4' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: do not include SME mask in the DMA supported check
2018-12-19neighbor: NTF_PROXY is a valid ndm_flag for a dump requestDavid Ahern
When dumping proxy entries the dump request has NTF_PROXY set in ndm_flags. strict mode checking needs to be updated to allow this flag. Fixes: 51183d233b5a ("net/neighbor: Update neigh_dump_info for strict data checking") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: mvpp2: fix the phylink mode validationAntoine Tenart
The mvpp2_phylink_validate() sets all modes that are supported by a given PPv2 port. An mistake made the 10000baseT_Full mode being advertised in some cases when a port wasn't configured to perform at 10G. This patch fixes this. Fixes: d97c9f4ab000 ("net: mvpp2: 1000baseX support") Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/sched: cls_flower: Remove old entries from rhashtableRoi Dayan
When replacing a rule we add the new rule to the rhashtable but only remove the old if not in skip_sw. This commit fix this and remove the old rule anyway. Fixes: 35cc3cefc4de ("net/sched: cls_flower: Reject duplicated rules also under skip_sw") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/tls: allocate tls context using GFP_ATOMICGanesh Goudar
create_ctx can be called from atomic context, hence use GFP_ATOMIC instead of GFP_KERNEL. [ 395.962599] BUG: sleeping function called from invalid context at mm/slab.h:421 [ 395.979896] in_atomic(): 1, irqs_disabled(): 0, pid: 16254, name: openssl [ 395.996564] 2 locks held by openssl/16254: [ 396.010492] #0: 00000000347acb52 (sk_lock-AF_INET){+.+.}, at: do_tcp_setsockopt.isra.44+0x13b/0x9a0 [ 396.029838] #1: 000000006c9552b5 (device_spinlock){+...}, at: tls_init+0x1d/0x280 [ 396.047675] CPU: 5 PID: 16254 Comm: openssl Tainted: G O 4.20.0-rc6+ #25 [ 396.066019] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0c 09/25/2017 [ 396.083537] Call Trace: [ 396.096265] dump_stack+0x5e/0x8b [ 396.109876] ___might_sleep+0x216/0x250 [ 396.123940] kmem_cache_alloc_trace+0x1b0/0x240 [ 396.138800] create_ctx+0x1f/0x60 [ 396.152504] tls_init+0xbd/0x280 [ 396.166135] tcp_set_ulp+0x191/0x2d0 [ 396.180035] ? tcp_set_ulp+0x2c/0x2d0 [ 396.193960] do_tcp_setsockopt.isra.44+0x148/0x9a0 [ 396.209013] __sys_setsockopt+0x7c/0xe0 [ 396.223054] __x64_sys_setsockopt+0x20/0x30 [ 396.237378] do_syscall_64+0x4a/0x180 [ 396.251200] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: df9d4a178022 ("net/tls: sleeping function from invalid context") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19iptunnel: make TUNNEL_FLAGS available in uapiwenxu
ip l add dev tun type gretap external ip r a 10.0.0.1 encap ip dst 192.168.152.171 id 1000 dev gretap For gretap Key example when the command set the id but don't set the TUNNEL_KEY flags. There is no key field in the send packet In the lwtunnel situation, some TUNNEL_FLAGS should can be set by userspace Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19gro_cell: add napi_disable in gro_cells_destroyLorenzo Bianconi
Add napi_disable routine in gro_cells_destroy since starting from commit c42858eaf492 ("gro_cells: remove spinlock protecting receive queues") gro_cell_poll and gro_cells_destroy can run concurrently on napi_skbs list producing a kernel Oops if the tunnel interface is removed while gro_cell_poll is running. The following Oops has been triggered removing a vxlan device while the interface is receiving traffic [ 5628.948853] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 5628.949981] PGD 0 P4D 0 [ 5628.950308] Oops: 0002 [#1] SMP PTI [ 5628.950748] CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.20.0-rc6+ #41 [ 5628.952940] RIP: 0010:gro_cell_poll+0x49/0x80 [ 5628.955615] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202 [ 5628.956250] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000 [ 5628.957102] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150 [ 5628.957940] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000 [ 5628.958803] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040 [ 5628.959661] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040 [ 5628.960682] FS: 0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000 [ 5628.961616] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5628.962359] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0 [ 5628.963188] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5628.964034] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5628.964871] Call Trace: [ 5628.965179] net_rx_action+0xf0/0x380 [ 5628.965637] __do_softirq+0xc7/0x431 [ 5628.966510] run_ksoftirqd+0x24/0x30 [ 5628.966957] smpboot_thread_fn+0xc5/0x160 [ 5628.967436] kthread+0x113/0x130 [ 5628.968283] ret_from_fork+0x3a/0x50 [ 5628.968721] Modules linked in: [ 5628.969099] CR2: 0000000000000008 [ 5628.969510] ---[ end trace 9d9dedc7181661fe ]--- [ 5628.970073] RIP: 0010:gro_cell_poll+0x49/0x80 [ 5628.972965] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202 [ 5628.973611] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000 [ 5628.974504] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150 [ 5628.975462] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000 [ 5628.976413] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040 [ 5628.977375] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040 [ 5628.978296] FS: 0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000 [ 5628.979327] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5628.980044] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0 [ 5628.980929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5628.981736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5628.982409] Kernel panic - not syncing: Fatal exception in interrupt [ 5628.983307] Kernel Offset: disabled Fixes: c42858eaf492 ("gro_cells: remove spinlock protecting receive queues") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19lan743x: Remove MAC Reset from initializationBryan Whitehead
The MAC Reset was noticed to erase important EEPROM settings. It is also unnecessary since a chip wide reset was done earlier in initialization, and that reset preserves EEPROM settings. There for this patch removes the unnecessary MAC specific reset. Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19virtio: fix test build after uio.h changeMichael S. Tsirkin
Fixes: d38499530e5 ("fs: decouple READ and WRITE from the block layer ops") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19Merge tag 'mlx5-fixes-2018-12-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2018-12-19 Some fixes for the mlx5 driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/mlx5e: Remove the false indication of software timestamping supportAlaa Hleihel
mlx5 driver falsely advertises support of software timestamping. Fix it by removing the false indication. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-19net/mlx5: Typo fix in del_sw_hw_ruleYuval Avnery
Expression terminated with "," instead of ";", resulted in set_fte getting bad value for modify_enable_mask field. Fixes: bd5251dbf156 ("net/mlx5_core: Introduce flow steering destination of type counter") Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-19net/mlx5e: RX, Fix wrong early return in receive queue pollTariq Toukan
When the completion queue of the RQ is empty, do not immediately return. If left-over decompressed CQEs (from the previous cycle) were processed, need to go to the finalization part of the poll function. Bug exists only when CQE compression is turned ON. This solves the following issue: mlx5_core 0000:82:00.1: mlx5_eq_int:544:(pid 0): CQ error on CQN 0xc08, syndrome 0x1 mlx5_core 0000:82:00.1 p4p2: mlx5e_cq_error_event: cqn=0x000c08 event=0x04 Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-19KVM: x86: nSVM: fix switch to guest mmuVitaly Kuznetsov
Recent optimizations in MMU code broke nested SVM with NPT in L1 completely: when we do nested_svm_{,un}init_mmu_context() we want to switch from TDP MMU to shadow MMU, both init_kvm_tdp_mmu() and kvm_init_shadow_mmu() check if re-configuration is needed by looking at cache source data. The data, however, doesn't change - it's only the type of the MMU which changes. We end up not re-initializing guest MMU as shadow and everything goes off the rails. The issue could have been fixed by putting MMU type into extended MMU role but this is not really needed. We can just split root and guest MMUs the exact same way we did for nVMX, their types never change in the lifetime of a vCPU. There is still room for improvement: currently, we reset all MMU roots when switching from L1 to L2 and back and this is not needed. Fixes: 7dcd57552008 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-19ipv6: explicitly initialize udp6_addr in udp_sock_create6()Cong Wang
syzbot reported the use of uninitialized udp6_addr::sin6_scope_id. We can just set ::sin6_scope_id to zero, as tunnels are unlikely to use an IPv6 address that needs a scope id and there is no interface to bind in this context. For net-next, it looks different as we have cfg->bind_ifindex there so we can probably call ipv6_iface_scope_id(). Same for ::sin6_flowinfo, tunnels don't use it. Fixes: 8024e02879dd ("udp: Add udp_sock_create for UDP tunnels to open listener socket") Reported-by: syzbot+c56449ed3652e6720f30@syzkaller.appspotmail.com Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19bnxt_en: Fix ethtool self-test loopback.Michael Chan
The current code has 2 problems. It assumes that the RX ring for the loopback packet is combined with the TX ring. This is not true if the ethtool channels are set to non-combined mode. The second problem is that it won't work on 57500 chips without adjusting the logic to get the proper completion ring (cpr) pointer. Fix both issues by locating the proper cpr pointer through the RX ring. Fixes: e44758b78ae8 ("bnxt_en: Use bnxt_cp_ring_info struct pointer as parameter for RX path.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19regulator: mcp16502: code cleanupAndrei.Stefanescu@microchip.com
This patch does the following: - align parameter with parenthesis - fix compile error If CONFIG_SUSPEND is not set the dummy pm_ops callbacks are named mcp16502_suspend and mcp16502_resume instead of mcp16502_suspend_noirq and mcp16502_resume_noirq. Excerpt from compile log (kbuild test robot): In file included from include/linux/device.h:23:0, from include/linux/gpio/driver.h:5, from include/asm-generic/gpio.h:13, from include/linux/gpio.h:62, from drivers/regulator/mcp16502.c:11: >> drivers/regulator/mcp16502.c:527:32: error: 'mcp16502_suspend_noirq' undeclared here (not in a function); did you mean 'mcp16502_suspend'? SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq, >> drivers/regulator/mcp16502.c:528:10: error: 'mcp16502_resume_noirq' undeclared here (not in a function); did you mean 'mcp16502_suspend_noirq'? mcp16502_resume_noirq) vim +527 drivers/regulator/mcp16502.c 524 525 #ifdef CONFIG_PM 526 static const struct dev_pm_ops mcp16502_pm_ops = { > 527 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq, > 528 mcp16502_resume_noirq) 529 }; 530 #endif 531 static const struct i2c_device_id mcp16502_i2c_id[] = { 532 { "mcp16502", 0 }, 533 { } 534 }; 535 MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id); 536 Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19Merge remote-tracking branch 'regmap/topic/irq' into regmap-nextMark Brown
2018-12-19Merge branch 'regmap-4.21' into regmap-nextMark Brown
2018-12-19regmap: irq: add an option to clear status registers on unmaskBartosz Golaszewski
Some interrupt controllers whose interrupts are acked on read will set the status bits for masked interrupts without changing the state of the IRQ line. Some chips have an additional "feature" where if those set bits are not cleared before unmasking their respective interrupts, the IRQ line will change the state and we'll interpret this as an interrupt although it actually fired when it was masked. Add a new field to the irq chip struct that tells the regmap irq chip code to always clear the status registers before actually changing the irq mask values. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19regmap: regmap-irq/gpio-max77620: add level-irq supportMatti Vaittinen
Add level active IRQ support to regmap-irq irqchip. Change breaks existing regmap-irq type setting. Convert the existing drivers which use regmap-irq with trigger type setting (gpio-max77620) to work with this new approach. So we do not magically support level-active IRQs on gpio-max77620 - but add support to the regmap-irq for chips which support them =) We do not support distinguishing situation where HW supports rising and falling edge detection but not both. Separating this would require inventing yet another flags for IRQ types. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19Merge branch 'rds-fixes'David S. Miller
Shamir Rabinovitch says: ==================== WARNING in rds_message_alloc_sgs This patch set fix google syzbot rds bug found in linux-next. The first patch solve the syzbot issue. The second patch fix issue mentioned by Leon Romanovsky that drivers should not call WARN_ON as result from user input. syzbot bug report can be foud here: https://lkml.org/lkml/2018/10/31/28 v1->v2: - patch 1: make rds_iov_vector fields name more descriptive (Hakon) - patch 1: fix potential mem leak in rds_rm_size if krealloc fail (Hakon) v2->v3: - patch 2: harden rds_sendmsg for invalid number of sgs (Gerd) v3->v4 - Santosh a.b. on both patches + repost to net-dev ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/rds: remove user triggered WARN_ON in rds_sendmsgshamir rabinovitch
per comment from Leon in rdma mailing list https://lkml.org/lkml/2018/10/31/312 : Please don't forget to remove user triggered WARN_ON. https://lwn.net/Articles/769365/ "Greg Kroah-Hartman raised the problem of core kernel API code that will use WARN_ON_ONCE() to complain about bad usage; that will not generate the desired result if WARN_ON_ONCE() is configured to crash the machine. He was told that the code should just call pr_warn() instead, and that the called function should return an error in such situations. It was generally agreed that any WARN_ON() or WARN_ON_ONCE() calls that can be triggered from user space need to be fixed." in addition harden rds_sendmsg to detect and overcome issues with invalid sg count and fail the sendmsg. Suggested-by: Leon Romanovsky <leon@kernel.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/rds: fix warn in rds_message_alloc_sgsshamir rabinovitch
redundant copy_from_user in rds_sendmsg system call expose rds to issue where rds_rdma_extra_size walk the rds iovec and and calculate the number pf pages (sgs) it need to add to the tail of rds message and later rds_cmsg_rdma_args copy the rds iovec again and re calculate the same number and get different result causing WARN_ON in rds_message_alloc_sgs. fix this by doing the copy_from_user only once per rds_sendmsg system call. When issue occur the below dump is seen: WARNING: CPU: 0 PID: 19789 at net/rds/message.c:316 rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 19789 Comm: syz-executor827 Not tainted 4.19.0-next-20181030+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 panic+0x2ad/0x55c kernel/panic.c:188 __warn.cold.8+0x20/0x45 kernel/panic.c:540 report_bug+0x254/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969 RIP: 0010:rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316 Code: c0 74 04 3c 03 7e 6c 44 01 ab 78 01 00 00 e8 2b 9e 35 fa 4c 89 e0 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 14 9e 35 fa <0f> 0b 31 ff 44 89 ee e8 18 9f 35 fa 45 85 ed 75 1b e8 fe 9d 35 fa RSP: 0018:ffff8801c51b7460 EFLAGS: 00010293 RAX: ffff8801bc412080 RBX: ffff8801d7bf4040 RCX: ffffffff8749c9e6 RDX: 0000000000000000 RSI: ffffffff8749ca5c RDI: 0000000000000004 RBP: ffff8801c51b7490 R08: ffff8801bc412080 R09: ffffed003b5c5b67 R10: ffffed003b5c5b67 R11: ffff8801dae2db3b R12: 0000000000000000 R13: 000000000007165c R14: 000000000007165c R15: 0000000000000005 rds_cmsg_rdma_args+0x82d/0x1510 net/rds/rdma.c:623 rds_cmsg_send net/rds/send.c:971 [inline] rds_sendmsg+0x19a2/0x3180 net/rds/send.c:1273 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2117 __sys_sendmsg+0x11d/0x280 net/socket.c:2155 __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2162 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x44a859 Code: e8 dc e6 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 6b cb fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1d4710ada8 EFLAGS: 00000297 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dcc28 RCX: 000000000044a859 RDX: 0000000000000000 RSI: 0000000020001600 RDI: 0000000000000003 RBP: 00000000006dcc20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000297 R12: 00000000006dcc2c R13: 646e732f7665642f R14: 00007f1d4710b9c0 R15: 00000000006dcd2c Kernel Offset: disabled Rebooting in 86400 seconds.. Reported-by: syzbot+26de17458aeda9d305d8@syzkaller.appspotmail.com Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19regulator: act8945a-regulator: make symbol act8945a_pm staticWei Yongjun
Fixes the following sparse warning: drivers/regulator/act8945a-regulator.c:340:1: warning: symbol 'act8945a_pm' was not declared. Should it be static? Fixes: 7482d6ecc68e ("regulator: act8945a-regulator: Implement PM functionalities") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19regmap: regmap-irq: Remove default irq type setting from coreMatti Vaittinen
The common code should not set IRQ type. Read HW defaults to the cache at startup instead of forcing type to EDGE_BOTH. If default setting is needed this should be done via normal mechanisms or by chip specific code if normal mechanisms are not suitable for some reason. Common regmap-irq code should not have defaults hard-coded but keep the HW/boot defaults untouched. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selectionPierre-Louis Bossart
For HDaudio and Skylake drivers, add module parameter "pci_binding" When pci_binding == 0 (AUTO), the PCI class/subclass info is used to select drivers based on the presence of the DSP. pci_binding == 1 (LEGACY) forces the use of the HDAudio legacy driver, even if the DSP is present. pci_binding == 2 (ASOC) forces the use of the ASOC driver. The information on the DSP presence is bypassed. The value for the module parameter needs to be identical for both drivers. This parameter is intended as a back-up solution if the automatic detection fails or when the DSP usage fails. Such cases should be reported on the alsa-devel mailing list for analysis. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-19ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selectedPierre-Louis Bossart
Now that the SST/Skylake driver supports per platform selectors, we can add logic to automatically select the right driver. If the Skylake driver is selected for a specific platform, and the DSP is detected at run-time based on the PCI class/subclass/prog-if information, the legacy HDaudio driver aborts the probe. This will result in a single driver probing and remove the need for modprobe blacklists. Follow-up patches will add a module parameter to bypass the logic if this automatic detection fails, or if the Skylake driver is unable to actually support the platform (firmware authentication, missing topology file, hardware issue, etc). The same mechanism will be used to conflicts generated by the same PCI ID being registered by both legacy HDAuudio and SOF drivers for Intel platforms. In other words SOF will not require changes to the HDaudio legacy. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-19ALSA: HDA: export process_unsol_events()Keyon Jie
The SOF implementation does not rely on the hdac_bus library, however for HDMI and HDaudio codec support it does need to deal with unsolicited events. Instead of re-inventing the wheel, export this symbol to reuse this part of the library directly. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-19Merge tag 'wireless-drivers-for-davem-2018-12-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.20 Last set of fixes for 4.20. All (except the mt76 fix) of these are important fixes to user reported problems and pretty small in size. rtlwifi * fix skb leak mwifiex * revert a commit from v4.19 due to problems with locking mt76 * fix a potential NULL derenfence * add entry to MAINTAINERS iwlwifi * fix a firmware crash which was a regression introduced in v4.20-rc4 ath10k * fix a firmware crash with wcn3990 firmware ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19Merge tag 'mac80211-for-davem-2018-12-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just three fixes: * fix a memory leak in an error path * fix TXQs in interface teardown * free fraglist if we used it internally before returning SKB ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19m68k: Fix memblock-related crashesGeert Uytterhoeven
When running the kernel in Fast RAM on Atari: Ignoring memory chunk at 0x0:0xe00000 before the first chunk ... Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<0069dbac>] free_all_bootmem+0x12c/0x186 SR: 2714 SP: (ptrval) a2: 005e3314 d0: 00000000 d1: 0000000a d2: 00000e00 d3: 00000000 d4: 005e1fc0 d5: 0000001a a0: 01000000 a1: 00000000 Process swapper (pid: 0, task=(ptrval)) Frame format=7 eff addr=00000736 ssw=0505 faddr=00000736 wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 00000736 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 005e1f84: 00000000 0000000a 027d3260 006b5006 00000000 00000000 00000000 00000000 0004f062 0003a220 0069e272 005e1ff8 0000054c 00000000 00e00000 00000000 00000001 00693cd8 027d3260 0004f062 0003a220 00691be6 00000000 00000000 00000000 00000000 00000000 00000000 006b5006 00000000 00690872 Call Trace: [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<0069e272>] memblock_virt_alloc_try_nid+0x0/0xa4 [<00693cd8>] mem_init+0xa/0x5c [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<00691be6>] start_kernel+0x1ca/0x462 [<00690872>] _sinittext+0x872/0x11f8 Code: 7a1a eaae 2270 6db0 0061 ef14 2f01 2f03 <96a9> 0736 2203 e589 d681 e78b d6a9 0732 2f03 2f40 0034 4eb9 0069 b8d0 260e 4fef Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill the idle task! As the kernel must run in the memory chunk with the lowest address, ST-RAM is ignored, and removed from the m68k_memory[] array. However, it is not removed from memblock, causing a crash later. More investigation shows that there are 3 places where memory chunks are ignored, all after the calls to memblock_add() in m68k_parse_bootinfo(), and thus causing crashes: 1. On classic m68k CPUs with a MMU, paging_init() ignores all memory chunks below the first chunk, cfr. above, 2. On Amigas equipped with a Zorro III bus, config_amiga() ignores all Zorro II memory, 3. If CONFIG_SINGLE_MEMORY_CHUNK=y, m68k_parse_bootinfo() ignores all but the first memory chunk. Fix this by moving the calls to memblock_add() from m68k_parse_bootinfo() to paging_init(), after all ignored memory chunks have been removed from m68k_memory[]. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Fixes: 1008a11590b966b4 ("m68k: switch to MEMBLOCK + NO_BOOTMEM") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-12-20kbuild: fix false positive warning/error about missing libelfMasahiro Yamada
For the same reason as commit 25896d073d8a ("x86/build: Fix compiler support check for CONFIG_RETPOLINE"), you cannot put this $(error ...) into the parse stage of the top Makefile. Perhaps I'd propose a more sophisticated solution later, but this is the best I can do for now. Link: https://lkml.org/lkml/2017/12/25/211 Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reported-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Reported-by: Qian Cai <cai@lca.pw> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Qian Cai <cai@lca.pw>
2018-12-19smb3: Fix rmdir compounding regression to strict serversRonnie Sahlberg
Some servers require that the setinfo matches the exact size, and in this case compounding changes introduced by commit c2e0fe3f5aae ("cifs: make rmdir() use compounding") caused us to send 8 bytes (padded length) instead of 1 byte (the size of the structure). See MS-FSCC section 2.4.11. Fixing this when we send a SET_INFO command for delete file disposition, then ends up as an iov of a single byte but this causes problems with SMB3 and encryption. To avoid this, instead of creating a one byte iov for the disposition value and then appending an additional iov with a 7 byte padding we now handle this as a single 8 byte iov containing both the disposition byte as well as the padding in one single buffer. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Paulo Alcantara <palcantara@suse.de>
2018-12-19ALSA: hda/realtek: Enable audio jacks of ASUS UX391UA with ALC294Wandrille RONCE
By default, there is no sound on Asus UX391UA on Linux. This patch adds sound support on Asus UX391UA. Tested working by three different users. The problem has also been described at https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 Signed-off-by: Wandrille RONCE <w@ndrille.fr> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-19ath10k: skip sending quiet mode cmd for WCN3990Rakesh Pillai
HL2.0 firmware does not support setting quiet mode. If the host driver sends the quiet mode setting command to the HL2.0 firmware, it crashes with the below signature. fatal error received: err_qdi.c:456:EX:wlan_process:1:WLAN RT:207a:PC=b001b4f0 The quiet mode command support is exposed by the firmware via thermal throttle wmi service. Enable ath10k thermal support if thermal throttle wmi service bit is set. 10.x firmware versions support this feature by default, but unfortunately do not advertise the support via service flags, hence have to manually set the service flag in ath10k_core_compat_services(). Tested on QCA988X with 10.2.4.70.9-2. Also tested on WCN3990. Co-developed-by: Govind Singh <govinds@codeaurora.org> Co-developed-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-19ALSA: bebob: fix model-id of unit for Apogee EnsembleTakashi Sakamoto
This commit fixes hard-coded model-id for an unit of Apogee Ensemble with a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly known as BridgeCo AG). I note that this model supports three modes in the number of data channels in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is switched by Vendor-dependent AV/C command, like: $ cd linux-firewire-utils $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs) When switching between different mode, the unit disappears from IEEE 1394 bus, then appears on the bus with different combination of stream formats. In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else up to 192.0 kHz. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': True, 'chip_ID': 21474898341, 'cmc': True, 'cyc_clk_acc': 100, 'generation': 2, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['HARDWARE_VERSION', 19], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble'], ['VERSION', 5297], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble']]], [ 'DEPENDENT_INFO', [ ['SPECIFIER_ID', 2037], ['VERSION', 1], [(58, 'IMMEDIATE'), 16777159], [(59, 'IMMEDIATE'), 1048576], [(60, 'IMMEDIATE'), 16777159], [(61, 'IMMEDIATE'), 6291456]]]]} Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 08:33:24 +0000