| Age | Commit message (Collapse) | Author |
|---|
|
Avoid hashing the tx napi struct into napi_hash[], which is used for
busy polling receive queues.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initialise init_net.count to 1 for its pointer from init_nsproxy lest
someone tries to do a get_net() and a put_net() in a process in which
current->ns_proxy->net_ns points to the initial network namespace.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Creating a geneve link with 'udpcsum' set results in a creation of link
for which UDP checksum will NOT be computed on outbound packets, as can
be seen below.
11: gen0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether c2:85:27:b6:b4:15 brd ff:ff:ff:ff:ff:ff promiscuity 0
geneve id 200 remote 192.168.13.1 dstport 6081 noudpcsum
Similarly, creating a link with 'noudpcsum' set results in a creation
of link for which UDP checksum will be computed on outbound packets.
Fixes: 9b4437a5b870 ("geneve: Unify LWT and netdev handling.")
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jiri Benc says:
====================
vxlan: do not error out on disabled IPv6
This patchset fixes a bug with metadata based tunnels when booted with
ipv6.disable=1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The message "Cannot bind port X, err=Y" creates only confusion. In metadata
based mode, failure of IPv6 socket creation is okay if IPv6 is disabled and
no error message should be printed. But when IPv6 tunnel was requested, such
failure is fatal. The vxlan_socket_create does not know when the error is
harmless and when it's not.
Instead of passing such information down to vxlan_socket_create, remove the
message completely. It's not useful. We propagate the error code up to the
user space and the port number comes from the user space. There's nothing in
the message that the process creating vxlan interface does not know.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When IPv6 is compiled but disabled at runtime, __vxlan_sock_add returns
-EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole
operation of bringing up the tunnel.
Ignore failure of IPv6 socket creation for metadata based tunnels caused by
IPv6 not being available.
Fixes: b1be00a6c39f ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace pattern
int status;
...
status = func(...);
return status;
by
return func(...);
No functional change intented.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reuse bnx2x_null_format_ver() in functions where it's appropriated
instead of open coded variant.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use scnprintf() when printing version instead of custom open coded variants.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2017-04-25
this is a pull request of 1 patch for net-next/master.
This patch by Oliver Hartkopp fixes the build of the broad cast manager
with CONFIG_PROC_FS disabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The description inside uapi/linux/bpf.h about bpf_get_socket_uid
helper function is no longer valid. It returns overflowuid rather
than 0 when failed.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
avoid direct access to sk->sk_state when tcp_poll() is called on a socket
using active TCP fastopen with deferred connect. Use local variable
'state', which stores the result of sk_state_load(), like it was done in
commit 00fd38d938db ("tcp: ensure proper barriers in lockless contexts").
Fixes: 19f6d3f3c842 ("net/tcp-fastopen: Add new API support")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While testing a fix [1] in ___pskb_trim(), addressing the WARN_ON_ONCE()
in skb_try_coalesce() reported by Andrey, I found that we had an skb
with skb->sk set but no skb->destructor.
This invalidated heuristic found in commit 158f323b9868 ("net: adjust
skb->truesize in pskb_expand_head()") and in cited patch.
Considering the BUG_ON(skb->sk) we have in skb_orphan(), we should
restrain the temporary setting to a minimal section.
[1] https://patchwork.ozlabs.org/patch/755570/
net: adjust skb->truesize in ___pskb_trim()
Fixes: 8f917bba0042 ("bpf: pass sk to helper functions")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since 83a77e9ec415, the phydev irq is explicitly set to PHY_POLL when
there is no pdata. It doesn't work on DT enabled platforms because the
phydev irq is already set by libphy before.
Fixes: 83a77e9ec415 ("net: macb: Added PCI wrapper for Platform Driver.")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver is no longer needed:
* It has no mainline users
* It has no DT support and OMAP is DT only
* iio-hwmon can be used for madc, which also works with DT
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"The final fixes for 4.11:
- prevent a triple fault with function graph tracing triggered via
suspend to ram
- prevent optimizing for size when function graph tracing is enabled
and the compiler does not support -mfentry
- prevent mwaitx() being called with a zero timeout as mwaitx() might
never return. Observed on the new Ryzen CPUs"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Prevent timer value 0 for MWAITX
x86/build: convert function graph '-Os' error to warning
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single fix for a cputime accounting regression which got introduced
in the 4.11 cycle"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Fix ksoftirqd cputime accounting regression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2017-04-30
This series contains updates to i40e and i40evf only.
Jake provides majority of the changes in this series, starting with the
renaming of a flag to avoid confusion. Then renamed a variable to a
more meaningful name to clarify what is actually being done and to
reduce confusion. Amortizes the wait time when initializing or disabling
lots of VFs by using i40e_reset_all_vfs() and
i40e_vsi_stop_rings_no_wait(). Cleaned up a unnecessary delay since
pci_disable_sriov() already has its own delay, so need to add a additional
delay when removing VFs. Avoid using the same name flags for both
vsi->state and pf->state, to make code review easier and assist future
work to use the correct state field when checking bits. Use
DECLARE_BITMAP() to ensure that we always allocate enough space for flags.
Replace hw_disabled_flags with the new _AUTO_DISABLED flags, which are
more readable because we are not setting an *_ENABLED flag to
disable the feature.
Alex corrects a oversight where we were not reprogramming the ports
after a reset, which was causing us to lose all of the receive tunnel
offloads.
Arnd Bergmann moves the declaration of a local variable to avoid a
warning seen on architectures with larger pages about an unused variable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2017-04-30
This series contains updates to e1000e only.
Jarod Wilson fixes an issue where the workaround for 82574 & 82583
is needed for i218 as well, so set the appropriate flags.
Sasha adds support for the upcoming new i219 devices for the client
platform (CannonLake), which includes the support for 38.4MHz frequency
to support PTP on CannonLake.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the ECDH key generation takes a different path, it needs to be
tested as well. For this generate the public debug key from the private
debug key and compare both.
This also moves the seeding of the private key into the SMP calling code
to allow for easier re-use of the ECDH key generation helper.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
When generating new ECDH keys with kpp, the shared secret input needs to
be set to NULL. Fix this by including kpp_request_set_input call.
Fixes: 58771c1c ("Bluetooth: convert smp and selftest to crypto kpp
API")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
struct esw_mc_addr is a small struct that can be part of struct
mlx5_eswitch. Define it as a field and not as a pointer and save the
kzalloc call and then error flow handling.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
We will activate the HW LRO only on servers with PCI BW > MAX LINK BW,
or when PCI BW > 16Gbps. On other cases we do not want LRO by default as
LRO sessions might get timeout and add redundant software overhead.
Tested:
ethtool -k <ifs-name> | grep large-receive-offload
On systems with and without the limitations.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
CQE ownership indication is as small as a single bit.
Use u8 to speedup the comparison.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
"prefetchw()" prefetches the cacheline for write. Use it for
skb->data, as soon we'll be copying the packet header there.
Performance:
Single-stream packet-rate tested with pktgen.
Packets are dropped in tc level to zoom into driver data-path.
Larger gain is expected for smaller packets, as less time
is spent on handling SKB fragments, making the path shorter
and the improvement more significant.
---------------------------------------------
packet size | before | after | gain |
64B | 4,113,306 | 4,778,720 | 16% |
1024B | 3,633,819 | 3,950,593 | 8.7% |
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
UMR operations are more frequent and important.
Check them first, and add a compiler branch predictor hint.
According to current design, ICOSQ CQ can contain at most one
pending CQE per napi. Poll function is optimized accordingly.
Performance:
Single-stream packet-rate tested with pktgen.
Packets are dropped in tc level to zoom into driver data-path.
Larger gain is expected for larger packet sizes, as BW is higher
and UMR posts are more frequent.
---------------------------------------------
packet size | before | after | gain |
64B | 4,092,370 | 4,113,306 | 0.5% |
1024B | 3,421,435 | 3,633,819 | 6.2% |
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The user can change delay_first_probe_time parameter through sysctl.
Listen to NETEVENT_DELAY_PROBE_TIME_UPDATE notifications and update the
intervals for updating the neighbours 'used' value periodic task and
for flow HW counters query periodic task.
Both of the intervals will be update only in case the new delay prob
time value is lower the current interval.
Since the driver saves only one min interval value and not per device,
the users will be able to set lower interval value for updating
neighbour 'used' value periodic task but they won't be able to schedule
a higher interval for this periodic task.
The used interval for scheduling neighbour 'used' value periodic task is
the minimal delay prob time parameter ever seen by the driver.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When IP tunnel encapsulation rules are offloaded, the kernel can't see
the traffic of the offloaded flow. The neighbour for the IP tunnel
destination of the offloaded flow can mistakenly become STALE and
deleted by the kernel since its 'used' value wasn't changed.
To make sure that a neighbour which is used by the HW won't become
STALE, we proactively update the neighbour 'used' value every
DELAY_PROBE_TIME period, when packets were matched and counted by the HW
for one of the tunnel encap flows related to this neighbour.
The periodic task that updates the used neighbours is scheduled when a
tunnel encap rule is successfully offloaded into HW and keeps re-scheduling
itself as long as the representor's neighbours list isn't empty.
Add, remove, lookup and status change operations done over the
representor's neighbours list or the neighbour hash entry encaps list
are all serialized by RTNL lock.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In order to offload TC encap rules, the driver does a lookup for the IP
tunnel neighbour according to the output device and the destination IP
given by the user.
To keep tracking after the validity state of such neighbours, we keep
the neighbours information (pair of device pointer and destination IP)
in a hash table maintained at the relevant egress representor and
register to get NETEVENT_NEIGH_UPDATE events. When getting neighbour update
netevent, we search for a match among the cached neighbours entries used for
encapsulation.
In case the neighbour isn't valid, we can't offload the flow into the
HW. We cache the flow (requested matching and actions) in the driver and
offload the rule later, when the neighbour is resolved and becomes
valid.
When a flow is only cached in the driver and not offloaded into HW
yet, we use EAGAIN return value to mark it internally, the TC ndo still
returns success.
Listen to kernel neighbour update netevents to trace relevant neighbours
validity state:
1. If a neighbour becomes valid, offload the related rules to HW.
2. If the neighbour becomes invalid, remove the related rules from HW.
3. If the neighbour mac address was changed, update the encap header.
Remove all the offloaded rules using the old encap header from the HW
and insert new rules to HW with updated encap header.
Access to the neighbors hash table is protected by RTNL lock of its
caller or by the table's spinlock.
Details of the locking/synchronization among the different actions
applied on the neighbour table:
Add/remove operations - protected by RTNL lock of its caller (all TC
commands are protected by RTNL lock). Add and remove operations are
initiated only when the user inserts/removes a TC rule into/from the driver.
Lookup/remove operations - since the lookup operation is done from
netevent notifier block, RTNL lock can't be used (atomic context).
Use the table's spin lock to protect lookups from TC user removal operation.
bh is used since netevent can be called from a softirq context.
Lookup/add operations - The hash table access functions are taking
care of the protection between lookup and add operations.
When adding/removing encap headers and rules to/from the HW, RTNL lock
is used. It can happen when:
1. The user inserts/removes a TC rule into/from the driver (TC commands
are protected by RTNL lock of it's caller).
2. The driver gets neighbour notification event, which reports about
neighbour validity status change. Before adding/removing encap headers
and rules to/from the HW, RTNL lock is taken.
A neighbour hash table entry should be freed when its encap list is empty.
Since The neighbour update netevent notification schedules a neighbour
update work that uses the neighbour hash entry, it can't be freed
unconditionally when the encap list becomes empty during TC delete rule flow.
Use reference count to protect from freeing neighbour hash table entry
while it's still in use.
When the user asks to unregister a netdvice used by one of the neigbours,
neighbour removal notification is received. Then we take a reference on the
neighbour and don't free it until the relevant encap entries (and flows) are
marked as invalid (not offloaded) and removed from HW.
As long as the encap entry is still valid (checked under RTNL lock) we
can safely access the neighbour device saved on mlx5e_neigh struct.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add hash table to the representors which is to be used by the next patch
to save neighbours information in the driver.
In order to offload IP tunnel encapsulation rules, the driver must find
the tunnel dst neighbour according to the output device and the
destination address given by the user. The next patch will cache the
neighbors information in the driver to allow support in neigh update
flow for tunnel encap rules.
The neighbour entries are also saved in a list so we easily iterate over
them when querying statistics in order to provide 'used' feedback to the
kernel neighbour NUD core.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The nud_state and hardware address fields are protected by the neighbour
lock, we should acquire it before accessing those parameters.
Use this lock to avoid inconsistency between the neighbour validity state
and it's hardware address.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Instead of relaying on the 'flow->rule' pointer value which can be
valid or invalid (in case the FW returns an error while trying to offload
the rule), monitor the rule state using a flag.
In downstream patch which adds support to IP tunneling neigh update
flow, a TC rule could be cached in the driver and not offloaded into the
HW. In this case, the flow handle pointer stays NULL.
Check the offloaded flag to properly deal with rules which are currently
not offloaded when querying rule statistics.
This patch doesn't add any new functionality.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
definition
Passing output device parameter to the helper functions that deal with
creation of encapsulation headers is redundant. Output device parameter
can be defined inside those helpers, no need to pass it. Refactor the code by
removing the parameter from the function signature.
This patch doesn't change any functionality.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The encap entry structure isn't manipulated by the eswitch code,
hence it can/needs to be removed from the eswitch header.
Do that, and change it to have mlx5e_ prefix.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Encap wise, the tc eswitch flow attribute struct needs to have
only the encap ID which is programmed later to the HW and none
of the higher level encap params, fix that.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Make representor netdev private data extendable by adding new struct
"mlx5e_rep_priv" and use it as the rep netdev private data struct
instead of directly pointing to mlx5_eswitch_rep.
Added new en_rep.h header file to contain all representor related
definitions and prototypes, and moved all representor specific logic
into en_rep.c.
Needed for downstream patches to extend representor functionality to
support neighbour update.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
|
|
Add support for 38.4MHz frequency is required for PTP
on CannonLake. SYSTIM frequency adjustment attributes for TIMINCA are
get/set dependent on the hardware clock frequency for a different
types of adapters. 38.4MHz frequency supported by CannonLake
and active once time synchronisation mechanism was enabled
Changed abbreviation from Hz to HZ to be compliant checkpatch code style
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Raanan Avargil <raanan.avargil@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The propagation of CannonLake mac type to driver functionality
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Raanan Avargil <raanan.avargil@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
i219 (6) and i219 (7) are the next LOM generations that will be
available on the nextIntel Client platform (CannonLake)
This patch provides the initial support for these devices
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Raanan Avargil <raanan.avargil@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used
as a PTP slave experiences random ~10 hour clock jumps, which are resolved
if the same workaround for the 82574 and 82583 is employed, so set the
appropriate flag2 in e1000_pch_lpt_info too.
Reported-by: Rupesh Patel <rupatel@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
On architectures with larger pages, we get a warning about an unused variable:
drivers/net/ethernet/intel/i40evf/i40evf_main.c: In function 'i40evf_configure_rx':
drivers/net/ethernet/intel/i40evf/i40evf_main.c:690:21: error: unused variable 'netdev' [-Werror=unused-variable]
This moves the declaration into the #ifdef to avoid the warning.
Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This matches the ordering of how we free stuff during reset and remove.
It also makes logical sense because we set the interrupts based on the
number of queues. Currently this doesn't really matter in practice.
However a future patch moves the assignment of num_active_queues into
i40evf_alloc_queues, which is required by
i40evf_set_interrupt_capability.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The flag used by the common code and PF code is I40E_FLAG_FD_ATR_ENABLED,
not *FDIR*. It turns out none of the txrx code actually shared with the
VF driver actually checks the ATR flag. This is made even more obvious
by the typo in the VF header file.
Let's just remove the flag from the VF driver since it's not needed.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The hw_disabled_flags field was added as a way of signifying that
a feature was automatically or temporarily disabled. However, we
actually only use this for FDir features. Replace its use with new
_AUTO_DISABLED flags instead. This is more readable, because you aren't
setting an *_ENABLED flag to *disable* the feature.
Additionally, clean up a few areas where we used these bits. First, we
don't really need to set the auto-disable flag for ATR if we're fully
disabling the feature via ethtool.
Second, we should always clear the auto-disable bits in case they somehow
got set when the feature was disabled. However, avoid displaying
a message that we've re-enabled the feature.
Third, we shouldn't be re-enabling ATR in the SB ntuple add flow,
because it might have been disabled due to space constraints. Instead,
we should just wait for the fdir_check_and_reenable to be called by the
watchdog.
Overall, this change allows us to simplify some code by removing an
extra field we didn't need, and the result should make it more clear as
to what we're actually doing with these flags.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
We already set pairs to the value of adapter->num_active_queues. This
value is limited by vsi_res->num_queue_pairs and num_online_cpus(). This
means that pairs by definition is already smaller than
num_online_cpus()*2, so we don't even need to bother with this check.
Lets just remove it and update the comment.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Instead of assuming our flags fit within an unsigned long, use
DECLARE_BITMAP which will ensure that we always allocate enough space.
Additionally, use __I40E_STATE_SIZE__ markers as the last element of the
enumeration so that the size of the BITMAP is compile-time assigned
rather than programmer-time assigned. This ensures that potential future
flag additions do not actually overrun the array. This is especially
important as 32bit systems would only have 32bit longs instead of 64bit
longs as we generally have assumed in the prior code.
This change also removes a dereference of the state fields throughout
the code, so it does have a bit of code churn. The conversions were
automated using sed replacements with an alternation
s/&(vsi->back|vsi|pf)->state/\1->state/
s/&adapter->vsi.state/adapter->vsi.state/
For debugfs, we modify the printing so that we can display chunks of the
state value on new lines. This ensures that we can print the entire set
of state values. Additionally, we now print them as 08lx to ensure that
they display nicely.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Avoid using the same named flags for both vsi->state and pf->state. This
makes code review easier, as it is more likely that future authors will
use the correct state field when checking bits. Previous commits already
found issues with at least one check, and possibly others may be
incorrect.
This reduces confusion as it is more clear what each flag represents,
and which flags are valid for which state field.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Newer hardware has uncovered a bug in the software implementation of
using MWAITX for the delay function. A value of 0 for the timer is meant
to indicate that a timeout will not be used to exit MWAITX. On newer
hardware this can result in MWAITX never returning, resulting in NMI
soft lockup messages being printed. On older hardware, some of the other
conditions under which MWAITX can exit masked this issue. The AMD APM
does not currently document this and will be updated.
Please refer to http://marc.info/?l=kvm&m=148950623231140 for
information regarding NMI soft lockup messages on an AMD Ryzen 1800X.
This has been root-caused as a 0 passed to MWAITX causing it to wait
indefinitely.
This change has the added benefit of avoiding the unnecessary setup of
MONITORX/MWAITX when the delay value is zero.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The delay was added because of a desire to ensure that the VF driver can
finish up removing. However, pci_disable_sriov already has its own
ssleep() call that will sleep for an entire second, so there is no
reason to add extra delay on top of this by using msleep here. In
practice, an msleep() won't have a huge impact on timing but there is no
real value in keeping it, so lets just simplify the code and remove it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Just as we do in i40e_reset_all_vfs, save some time when freeing VFs by
amortizing the wait time for stopping queues. We can use
i40e_vsi_stop_rings_no_wait() to begin the process of stopping all the
VF rings at once. Then, once we've started the process on each VF we can
begin waiting for the VFs to stop. This helps reduce the total wait time
by a large factor.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
