| Age | Commit message (Collapse) | Author |
|---|
|
Add me as a maintainer of the MediaTek MT7530 DSA subdriver.
List maintainers in alphabetical order by first name.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the introduction of the OF bindings, DSA has always had a policy that
in case multiple CPU ports are present in the device tree, the numerically
smallest one is always chosen.
The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU
ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because
it has higher bandwidth.
The MT7530 driver developers had 3 options:
- to modify DSA when the MT7531 switch support was introduced, such as to
prefer the better port
- to declare both CPU ports in device trees as CPU ports, and live with the
sub-optimal performance resulting from not preferring the better port
- to declare just port 6 in the device tree as a CPU port
Of course they chose the path of least resistance (3rd option), kicking the
can down the road. The hardware description in the device tree is supposed
to be stable - developers are not supposed to adopt the strategy of
piecemeal hardware description, where the device tree is updated in
lockstep with the features that the kernel currently supports.
Now, as a result of the fact that they did that, any attempts to modify the
device tree and describe both CPU ports as CPU ports would make DSA change
its default selection from port 6 to 5, effectively resulting in a
performance degradation visible to users with the MT7531BE switch as can be
seen below.
Without preferring port 6:
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-20.00 sec 374 MBytes 157 Mbits/sec 734 sender
[ 5][TX-C] 0.00-20.00 sec 373 MBytes 156 Mbits/sec receiver
[ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 778 Mbits/sec 0 sender
[ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 777 Mbits/sec receiver
With preferring port 6:
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 856 Mbits/sec 273 sender
[ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 855 Mbits/sec receiver
[ 7][RX-C] 0.00-20.00 sec 1.72 GBytes 737 Mbits/sec 15 sender
[ 7][RX-C] 0.00-20.00 sec 1.71 GBytes 736 Mbits/sec receiver
Using one port for WAN and the other ports for LAN is a very popular use
case which is what this test emulates.
As such, this change proposes that we retroactively modify stable kernels
(which don't support the modification of the CPU port assignments, so as to
let user space fix the problem and restore the throughput) to keep the
mt7530 driver preferring port 6 even with device trees where the hardware
is more fully described.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
LLDP frames are link-local frames, therefore they must be trapped to the
CPU port. Currently, the MT753X switches treat LLDP frames as regular
multicast frames, therefore flooding them to user ports. To fix this, set
LLDP frames to be trapped to the CPU port(s).
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BPDUs are link-local frames, therefore they must be trapped to the CPU
port. Currently, the MT7530 switch treats BPDUs as regular multicast
frames, therefore flooding them to user ports. To fix this, set BPDUs to be
trapped to the CPU port. Group this on mt7530_setup() and
mt7531_setup_common() into mt753x_trap_frames() and call that.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All MT7530 switch IP variants share the MT7530_MFC register, but the
current driver only writes it for the switch variant that is integrated in
the MT7621 SoC. Modify the code to include all MT7530 derivatives.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU
frames (further restricted by PCR_MATRIX).
Currently the driver sets the first CPU port as the single port in this bit
mask, which works fine regardless of whether the device tree defines port
5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's
logic of picking the first CPU port as the CPU port that all user ports are
affine to, by default.
An upcoming change would like to influence DSA's selection of the default
CPU port to no longer be the first one, and in that case, this logic needs
adaptation.
Since there is no observed leakage or duplication of frames if all CPU
ports are defined in this bit mask, simply include them all.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Layerscape MACs support 25Gbps network speed with dpmac "CAUI" mode.
Add the mappings between DPMAC_ETH_IF_* and HY_INTERFACE_MODE_*, as well
as the 25000 mac capability.
Tested on SolidRun LX2162a Clearfog, serdes 1 protocol 18.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
An update from ieee802154 for your *net* tree:
Two small fixes and MAINTAINERS update this time.
Azeem Shaikh ensured consistent use of strscpy through the tree and fixed
the usage in our trace.h.
Chen Aotian fixed a potential memory leak in the hwsim simulator for
ieee802154.
Miquel Raynal updated the MAINATINERS file with the new team git tree
locations and patchwork URLs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rahul Rameshbabu says:
====================
ptp .adjphase cleanups
The goal of this patch series is to improve documentation of .adjphase, add
a new callback .getmaxphase to enable advertising the max phase offset a
device PHC can support, and support invoking .adjphase from the testptp
kselftest.
Changes:
v2->v1:
* Removes arbitrary rule that the PHC servo must restore the frequency
to the value used in the last .adjfine call if any other PHC
operation is used after a .adjphase operation.
* Removes a macro introduced in v1 for adding PTP sysfs device
attribute nodes using a callback for populating the data.
Link: https://lore.kernel.org/netdev/20230120160609.19160723@kernel.org/
Link: https://lore.kernel.org/netdev/20230510205306.136766-1-rrameshbabu@nvidia.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a function that advertises a maximum offset of zero supported by
ptp_clock_info .adjphase in the OCP null ptp implementation.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Advertise the maximum offset the .adjphase callback is capable of
supporting in nanoseconds for IDT devices.
Refactor the negation of the offset stored in the register to be after the
boundary check of the offset value rather than before. Boundary check based
on the intended value rather than its device-specific representation.
Depend on ptp_clock_adjtime for handling out-of-range offsets.
ptp_clock_adjtime returns -ERANGE instead of clamping out-of-range offsets.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Min Li <min.li.xe@renesas.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Advertise the maximum offset the .adjphase callback is capable of
supporting in nanoseconds for IDT ClockMatrix devices. Depend on
ptp_clock_adjtime for handling out-of-range offsets. ptp_clock_adjtime
returns -ERANGE instead of clamping out-of-range offsets.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement .getmaxphase callback of ptp_clock_info in mlx5 driver. No longer
do a range check in .adjphase callback implementation. Handled by the ptp
stack.
Cc: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enables advertisement of the maximum offset supported by the phase control
functionality of PHCs. The callback is used to return an error if an offset
not supported by the PHC is used in ADJ_OFFSET. The ioctls
PTP_CLOCK_GETCAPS and PTP_CLOCK_GETCAPS2 now advertise the maximum offset a
PHC's phase control functionality is capable of supporting. Introduce new
sysfs node, max_phase_adjustment.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Invoke clock_adjtime syscall with tx.modes set with ADJ_OFFSET when testptp
is invoked with a phase adjustment offset value. Support seconds and
nanoseconds for the offset value.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use existing NSEC_PER_SEC declaration in place of hardcoded magic numbers.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mlx5_core driver has implemented ptp clock driver functionality but
lacked documentation about the PTP devices. This patch adds information
about the Mellanox device family.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
.adjphase expects a PHC to use an internal servo algorithm to correct the
provided phase offset target in the callback. Implementation of the
internal servo algorithm are defined by the individual devices.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix races in Hyper-V PCI controller (Dexuan Cui)
- Fix handling of hyperv_pcpu_input_arg (Michael Kelley)
- Fix vmbus_wait_for_unload to scan present CPUs (Michael Kelley)
- Call hv_synic_free in the failure path of hv_synic_alloc (Dexuan Cui)
- Add noop for real mode handlers for virtual trust level code (Saurabh
Sengar)
* tag 'hyperv-fixes-signed-20230619' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
PCI: hv: Add a per-bus mutex state_lock
Revert "PCI: hv: Fix a timing issue which causes kdump to fail occasionally"
PCI: hv: Remove the useless hv_pcichild_state from struct hv_pci_dev
PCI: hv: Fix a race condition in hv_irq_unmask() that can cause panic
PCI: hv: Fix a race condition bug in hv_pci_query_relations()
arm64/hyperv: Use CPUHP_AP_HYPERV_ONLINE state to fix CPU online sequencing
x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline
Drivers: hv: vmbus: Fix vmbus_wait_for_unload() to scan present CPUs
Drivers: hv: vmbus: Call hv_synic_free() if hv_synic_alloc() fails
x86/hyperv/vtl: Add noop for realmode pointers
|
|
Currently the MM selftests attempt to work out the target architecture by
using CROSS_COMPILE or otherwise querying the host machine, storing the
target architecture in a variable called MACHINE rather than the usual
ARCH though as far as I can tell (including for x86_64) the value is the
same as we would use for architecture.
When cross compiling with LLVM we don't need a CROSS_COMPILE as LLVM can
support many target architectures in a single build so this logic does not
work, CROSS_COMPILE is not set and we end up selecting tests for the host
rather than target architecture. Fix this by using the more standard ARCH
to describe the architecture, taking it from the environment if specified.
Link: https://lkml.kernel.org/r/20230614-kselftest-mm-llvm-v1-1-180523f277d3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I am going to be losing my sifive.com address soon and I also realised my
old Simtec address (from >10 years ago) is also not been updates so update
.mailmap for both.
Link: https://lkml.kernel.org/r/20230615081820.79485-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In a syzbot stress test that deliberately causes file system errors on
nilfs2 with a corrupted disk image, it has been reported that
nilfs_clear_dirty_page() called from nilfs_clear_dirty_pages() can cause a
general protection fault.
In nilfs_clear_dirty_pages(), when looking up dirty pages from the page
cache and calling nilfs_clear_dirty_page() for each dirty page/folio
retrieved, the back reference from the argument page to "mapping" may have
been changed to NULL (and possibly others). It is necessary to check this
after locking the page/folio.
So, fix this issue by not calling nilfs_clear_dirty_page() on a page/folio
after locking it in nilfs_clear_dirty_pages() if the back reference
"mapping" from the page/folio is different from the "mapping" that held
the page/folio just before.
Link: https://lkml.kernel.org/r/20230612021456.3682-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+53369d11851d8f26735c@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000da4f6b05eb9bf593@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit f95bdb700bc6bb74e1199b1f5f90c613e152cfa7.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink. So
revert the shrinker_srcu related changes first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-8-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit caa05325c9126c77ebf114edce51536a0d0a9a08.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink. So
revert the shrinker_srcu related changes first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-7-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 475733dda5aedba9e086379aafe6b5ffd53e8f5e.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink. So revert the
shrinker_srcu related changes first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-6-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 20cd1892fcc3efc10a7ac327cc3790494bec46b5.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink. So revert the
shrinker_srcu related changes first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-5-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit b3cabea3c9153fd42fe5cb851ac58b51ea2b32b8.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be careful
to not frequently check for SRCU read-side critical section exits. Therefore,
even if no one is currently in the SRCU read-side critical section,
synchronize_srcu() cannot return quickly. That's why unregister_shrinker()
has become slower.
We will try to use the refcount+RCU method [2] proposed by Dave Chinner
to continue to re-implement the lockless slab shrink. Because there will
be other readers after reverting the shrinker_srcu related changes, so
it is better to restore to hold read lock to reparent shrinker nr_deferred.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-4-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 1643db98d9b314e0a592d152603094fbf7ab906e.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink. So we still need
shrinker_rwsem in synchronize_shrinkers() after reverting the
shrinker_srcu related changes.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-3-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "revert shrinker_srcu related changes".
This patch (of 7):
This reverts commit cf2e309ebca7bb0916771839f9b580b06c778530.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink. So
revert the shrinker_mutex back to shrinker_rwsem first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev
Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As a result of analysis of a syzbot report, it turned out that in three
cases where nilfs2 allocates block device buffers directly via sb_getblk,
concurrent reads to the device can corrupt the allocated buffers.
Nilfs2 uses sb_getblk for segment summary blocks, that make up a log
header, and the super root block, that is the trailer, and when moving and
writing the second super block after fs resize.
In any of these, since the uptodate flag is not set when storing metadata
to be written in the allocated buffers, the stored metadata will be
overwritten if a device read of the same block occurs concurrently before
the write. This causes metadata corruption and misbehavior in the log
write itself, causing warnings in nilfs_btree_assign() as reported.
Fix these issues by setting an uptodate flag on the buffer head on the
first or before modifying each buffer obtained with sb_getblk, and
clearing the flag on failure.
When setting the uptodate flag, the lock_buffer/unlock_buffer pair is used
to perform necessary exclusive control, and the buffer is filled to ensure
that uninitialized bytes are not mixed into the data read from others. As
for buffers for segment summary blocks, they are filled incrementally, so
if the uptodate flag was unset on their allocation, set the flag and zero
fill the buffer once at that point.
Also, regarding the superblock move routine, the starting point of the
memset call to zerofill the block is incorrectly specified, which can
cause a buffer overflow on file systems with block sizes greater than
4KiB. In addition, if the superblock is moved within a large block, it is
necessary to assume the possibility that the data in the superblock will
be destroyed by zero-filling before copying. So fix these potential
issues as well.
Link: https://lkml.kernel.org/r/20230609035732.20426-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+31837fe952932efc8fb9@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000030000a05e981f475@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
--0000000000009a0c9905fd9173ad
Content-Transfer-Encoding: 8bit
After f15afbd34d8f ("fs: fix undefined behavior in bit shift for
SB_NOUSER") the constants were changed from plain integers which
LX_VALUE() can parse to constants using the BIT() macro which causes the
following:
Reading symbols from build/linux-custom/vmlinux...done.
Traceback (most recent call last):
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
import linux.constants
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/constants.py", line 5
LX_SB_RDONLY = ((((1UL))) << (0))
Use LX_GDBPARSED() which does not suffer from that issue.
f15afbd34d8f ("fs: fix undefined behavior in bit shift for SB_NOUSER")
Link: https://lkml.kernel.org/r/20230607221337.2781730-1-florian.fainelli@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Cc: Hao Ge <gehao@kylinos.cn>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since gfp flags have been shifted to gfp_types.h so update the path in
the gfp-translate script.
Link: https://lkml.kernel.org/r/20230608154450.21758-1-prathubaronia2011@gmail.com
Fixes: cb5a065b4ea9c ("headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>")
Signed-off-by: Prathu Baronia <prathubaronia2011@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This effectively reverts commit 16c243e99d33 ("udmabuf: Add support for
mapping hugepages (v4)"). Recently, Junxiao Chang found a BUG with page
map counting as described here [1]. This issue pointed out that the
udmabuf driver was making direct use of subpages of hugetlb pages. This
is not a good idea, and no other mm code attempts such use. In addition
to the mapcount issue, this also causes issues with hugetlb vmemmap
optimization and page poisoning.
For now, remove hugetlb support.
If udmabuf wants to be used on hugetlb mappings, it should be changed to
only use complete hugetlb pages. This will require different alignment
and size requirements on the UDMABUF_CREATE API.
[1] https://lore.kernel.org/linux-mm/20230512072036.1027784-1-junxiao.chang@intel.com/
Link: https://lkml.kernel.org/r/20230608204927.88711-1-mike.kravetz@oracle.com
Fixes: 16c243e99d33 ("udmabuf: Add support for mapping hugepages (v4)")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Junxiao Chang <junxiao.chang@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove an unnecessary call to xas_set(index) when iterating over the
target range in collapse_file. The extra call to xas_set reset the xas
cursor to the top of the tree, causing the xas_next call on the next
iteration to walk the tree to index instead of advancing to index+1. This
returned the same page again, which would cause collapse_file to fail
because the page is already locked.
This bug was hidden when CONFIG_DEBUG_VM was set. When that config was
used, the xas_load in a subsequent VM_BUG_ON assert would walk xas from
the top of the tree to index, causing the xas_next call on the next loop
iteration to advance the cursor as expected.
Link: https://lkml.kernel.org/r/20230607053135.2087354-1-stevensd@google.com
Fixes: a2e17cc2efc7 ("mm/khugepaged: maintain page cache uptodate flag")
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure that file_seals is non-NULL before using it in the memfd_create()
syscall. One situation in which memfd_file_seals_ptr() could return a
NULL pointer when CONFIG_SHMEM=n, oopsing the kernel.
Link: https://lkml.kernel.org/r/20230607132427.2867435-1-roberto.sassu@huaweicloud.com
Fixes: 47b9012ecdc7 ("shmem: add sealing support to hugetlb-backed memfd")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In __vmalloc_area_node() we always warn_alloc() when an allocation
performed by vm_area_alloc_pages() fails unless it was due to a pending
fatal signal.
However, huge page allocations instigated either by vmalloc_huge() or
__vmalloc_node_range() (or a caller that invokes this like kvmalloc() or
kvmalloc_node()) always falls back to order-0 allocations if the huge page
allocation fails.
This renders the warning useless and noisy, especially as all callers
appear to be aware that this may fallback. This has already resulted in
at least one bug report from a user who was confused by this (see link).
Therefore, simply update the code to only output this warning for order-0
pages when no fatal signal is pending.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1211410
Link: https://lkml.kernel.org/r/20230605201107.83298-1-lstoakes@gmail.com
Fixes: 80b1d8fdfad1 ("mm: vmalloc: correct use of __GFP_NOWARN mask in __vmalloc_area_node()")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The return of do_mprotect_pkey() can still be incorrectly returned as
success if there is a gap that spans to or beyond the end address passed
in. Update the check to ensure that the end address has indeed been seen.
Link: https://lore.kernel.org/all/CABi2SkXjN+5iFoBhxk71t3cmunTk-s=rB4T7qo0UQRh17s49PQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230606182912.586576-1-Liam.Howlett@oracle.com
Fixes: 82f951340f25 ("mm/mprotect: fix do_mprotect_pkey() return on error")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When commit 19343b5bdd16 ("mm/page-writeback: introduce tracepoint for
wait_on_page_writeback()") repurposed the writeback_dirty_page trace event
as a template to create its new wait_on_page_writeback trace event, it
ended up opening a window to NULL pointer dereference crashes due to the
(infrequent) occurrence of a race where an access to a page in the
swap-cache happens concurrently with the moment this page is being written
to disk and the tracepoint is enabled:
BUG: kernel NULL pointer dereference, address: 0000000000000040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 800000010ec0a067 P4D 800000010ec0a067 PUD 102353067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1320 Comm: shmem-worker Kdump: loaded Not tainted 6.4.0-rc5+ #13
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230301gitf80f052277c8-1.fc37 03/01/2023
RIP: 0010:trace_event_raw_event_writeback_folio_template+0x76/0xf0
Code: 4d 85 e4 74 5c 49 8b 3c 24 e8 06 98 ee ff 48 89 c7 e8 9e 8b ee ff ba 20 00 00 00 48 89 ef 48 89 c6 e8 fe d4 1a 00 49 8b 04 24 <48> 8b 40 40 48 89 43 28 49 8b 45 20 48 89 e7 48 89 43 30 e8 a2 4d
RSP: 0000:ffffaad580b6fb60 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff90e38035c01c RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff90e38035c044
RBP: ffff90e38035c024 R08: 0000000000000002 R09: 0000000000000006
R10: ffff90e38035c02e R11: 0000000000000020 R12: ffff90e380bac000
R13: ffffe3a7456d9200 R14: 0000000000001b81 R15: ffffe3a7456d9200
FS: 00007f2e4e8a15c0(0000) GS:ffff90e3fbc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000040 CR3: 00000001150c6003 CR4: 0000000000170ee0
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x76/0x170
? kernelmode_fixup_or_oops+0x84/0x110
? exc_page_fault+0x65/0x150
? asm_exc_page_fault+0x22/0x30
? trace_event_raw_event_writeback_folio_template+0x76/0xf0
folio_wait_writeback+0x6b/0x80
shmem_swapin_folio+0x24a/0x500
? filemap_get_entry+0xe3/0x140
shmem_get_folio_gfp+0x36e/0x7c0
? find_busiest_group+0x43/0x1a0
shmem_fault+0x76/0x2a0
? __update_load_avg_cfs_rq+0x281/0x2f0
__do_fault+0x33/0x130
do_read_fault+0x118/0x160
do_pte_missing+0x1ed/0x2a0
__handle_mm_fault+0x566/0x630
handle_mm_fault+0x91/0x210
do_user_addr_fault+0x22c/0x740
exc_page_fault+0x65/0x150
asm_exc_page_fault+0x22/0x30
This problem arises from the fact that the repurposed writeback_dirty_page
trace event code was written assuming that every pointer to mapping
(struct address_space) would come from a file-mapped page-cache object,
thus mapping->host would always be populated, and that was a valid case
before commit 19343b5bdd16. The swap-cache address space
(swapper_spaces), however, doesn't populate its ->host (struct inode)
pointer, thus leading to the crashes in the corner-case aforementioned.
commit 19343b5bdd16 ended up breaking the assignment of __entry->name and
__entry->ino for the wait_on_page_writeback tracepoint -- both dependent
on mapping->host carrying a pointer to a valid inode. The assignment of
__entry->name was fixed by commit 68f23b89067f ("memcg: fix a crash in
wb_workfn when a device disappears"), and this commit fixes the remaining
case, for __entry->ino.
Link: https://lkml.kernel.org/r/20230606233613.1290819-1-aquini@redhat.com
Fixes: 19343b5bdd16 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()")
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Kuniyuki Iwashima says:
====================
ipv6: Random cleanup for Extension Header.
This series (1) cleans up pskb_may_pull() in some functions, where needed
data are already pulled by their caller, (2) removes redundant multicast
test, and (3) optimises reload timing of the header.
====================
Link: https://lore.kernel.org/r/20230614230107.22301-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipv6_destopt_rcv() and ipv6_parse_hopopts() pulls these data
- Hop-by-Hop/Destination Options Header : 8
- Hdr Ext Len : skb_transport_header(skb)[1] << 3
and calls ip6_parse_tlv(), so it need not check if skb_headlen() is less
than skb_transport_offset(skb) + (skb_transport_header(skb)[1] << 3).
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need not reload hdr in ipv6_srh_rcv() unless we call
pskb_expand_head().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipv6_rthdr_rcv() pulls these data
- Segment Routing Header : 8
- Hdr Ext Len : skb_transport_header(skb)[1] << 3
needed by ipv6_srh_rcv(), so pskb_pull() in ipv6_srh_rcv() never
fails and can be replaced with skb_pull().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipv6_rpl_srh_rcv() checks if ipv6_hdr(skb)->daddr or ohdr->rpl_segaddr[i]
is the multicast address with ipv6_addr_type().
We have the same check for ipv6_hdr(skb)->daddr in ipv6_rthdr_rcv(), so we
need not recheck it in ipv6_rpl_srh_rcv().
Also, we should use ipv6_addr_is_multicast() for ohdr->rpl_segaddr[i]
instead of ipv6_addr_type().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Eric Dumazet pointed out [0], ipv6_rthdr_rcv() pulls these data
- Segment Routing Header : 8
- Hdr Ext Len : skb_transport_header(skb)[1] << 3
needed by ipv6_rpl_srh_rcv(). We can remove pskb_may_pull() and
replace pskb_pull() with skb_pull() in ipv6_rpl_srh_rcv().
Link: https://lore.kernel.org/netdev/CANn89iLboLwLrHXeHJucAqBkEL_S0rJFog68t7wwwXO-aNf5Mg@mail.gmail.com/ [0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS writeback fixes from David Howells:
- release the acquired batch before returning if we got >=5 skips
- retry a page we had to wait for rather than skipping over it after
the wait
* tag 'afs-fixes-20230719' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix waiting for writeback then skipping folio
afs: Fix dangling folio ref counts in writeback
|
|
L3_OUT and L4_OUT Bit fields range from Bit 0:4 and thus the
mask should be 0x1F instead of 0x0F.
Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20230614125240.3946519-1-t.remmet@phytec.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When using encapsulation the original packet's headers are copied to the
inner headers. This preserves the space for an inner mac header, which
is not used by the inner payloads for the encapsulation types supported
by IPVS. If a packet is using GUE or GRE encapsulation and needs to be
segmented, flow can be passed to __skb_udp_tunnel_segment() which
calculates a negative tunnel header length. A negative tunnel header
length causes pskb_may_pull() to fail, dropping the packet.
This can be observed by attaching probes to ip_vs_in_hook(),
__dev_queue_xmit(), and __skb_udp_tunnel_segment():
perf probe --add '__dev_queue_xmit skb->inner_mac_header \
skb->inner_network_header skb->mac_header skb->network_header'
perf probe --add '__skb_udp_tunnel_segment:7 tnl_hlen'
perf probe -m ip_vs --add 'ip_vs_in_hook skb->inner_mac_header \
skb->inner_network_header skb->mac_header skb->network_header'
These probes the headers and tunnel header length for packets which
traverse the IPVS encapsulation path. A TCP packet can be forced into
the segmentation path by being smaller than a calculated clamped MSS,
but larger than the advertised MSS.
probe:ip_vs_in_hook: inner_mac_header=0x0 inner_network_header=0x0 mac_header=0x44 network_header=0x52
probe:ip_vs_in_hook: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
probe:dev_queue_xmit: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
probe:__skb_udp_tunnel_segment_L7: tnl_hlen=-2
When using veth-based encapsulation, the interfaces are set to be
mac-less, which does not preserve space for an inner mac header. This
prevents this issue from occurring.
In our real-world testing of sending a 32KB file we observed operation
time increasing from ~75ms for veth-based encapsulation to over 1.5s
using IPVS encapsulation due to retries from dropped packets.
This changeset modifies the packet on the encapsulation path in
ip_vs_tunnel_xmit() and ip_vs_tunnel_xmit_v6() to remove the inner mac
header offset. This fixes UDP segmentation for both encapsulation types,
and corrects the inner headers for any IPIP flows that may use it.
Fixes: 84c0d5e96f3a ("ipvs: allow tunneling with gue encapsulation")
Signed-off-by: Terin Stock <terin@cloudflare.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit acc8d8588cb7 converted afs_writepages_region() to write back a
folio batch. The function waits for writeback to a folio, but then
proceeds to the rest of the batch without trying to write that folio
again. This patch fixes has it attempt to write the folio again.
[DH: Also remove an 'else' that adding a goto makes redundant]
Fixes: acc8d8588cb7 ("afs: convert afs_writepages_region() to use filemap_get_folios_tag()")
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20230607204120.89416-2-vishal.moola@gmail.com/
|
|
Commit acc8d8588cb7 converted afs_writepages_region() to write back a
folio batch. If writeback needs rescheduling, the function exits without
dropping the references to the folios in fbatch. This patch fixes that.
[DH: Moved the added line before the _leave()]
Fixes: acc8d8588cb7 ("afs: convert afs_writepages_region() to use filemap_get_folios_tag()")
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20230607204120.89416-1-vishal.moola@gmail.com/
|
|
The driver overrides the error codes returned by platform_get_irq_byname()
to -ENODEV, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating error
codes upstream.
Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-13-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
