summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-18drm/amd/display: refactor dump_clk_registersSu Sung Chung
[why] for 2 purposes: 1. get raw register value dumped on the log, which will make it easier to talk to other team who only knows about the register 2. enable other HW to be able to use the same interface as raven to log clock register data Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: wait for the whole frame after global unlockWenjing Liu
[why] The current code will not wait for the entire frame after global unlock. This causes dsc dynamic target bpp update corruption when there is a surface update immediately happens after this. [how] Wait for the entire whole frame after unlock before continuing the rest of stream and surface update. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display:Use Pixel clock in 100Hz units for HDMI Audio wall clock DTONevenko Stupar
[Why] -Pass and use pixel clock in 100 Hz to Audio for HDMI audio DTO for Audio wall clock programming so audio DTO gets increased precision for timings with /1001 factor. -For HDMI TMDS for N and CTS ACR tables are based on 10 KHz units, these does not need to be modified as N and CTS values are still valid using current tables. Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Copy max_clks_by_state after dce_clk_mgr_constructNicholas Kazlauskas
[Why] For DCE110, DCE112 and DCE120 the max_clks_by_state for the clk_mgr are copied from their respective table before the call to dce_clk_mgr_construct, but then dce_clk_mgr_construct overwrites these with the dce80_max_clks_by_state. [How] Copy these after we call dce_clk_mgr_construct so we're using the right tables. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Clock does not lower in UpdateplanesMurton Liu
[why] We reset the optimized_required in atomic_plane_disable flag immediately after it is set in atomic_plane_disconnect, causing us to never have flag set during next flip in UpdatePlanes. [how] Optimize directly after each time plane is removed. Signed-off-by: Murton Liu <murton.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Incorrect Read Interval Time For CR SequenceDavid Galiffi
[WHY] TRAINING_AUX_RD_INTERVAL (DPCD 000Eh) modifies the read interval for the EQ training sequence. CR read interval should remain 100 us. Currently, the CR interval is also being modified. [HOW] lt_settings->cr_pattern_time should always be 100 us. Signed-off-by: David Galiffi <david.galiffi@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: 3.2.38Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Split out common HUBP registers and codeCharlene Liu
There are shared regs and code across DCN generations. Pull them out into a shared common location. Also, expose some dcn20 init functions. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: skip retrain in dc_link_set_preferred_link_settings() if ↵Samson Tam
using passive dongle [Why] Fixes issue when we have a display connected using a passive dongle and then emulate over it using a DP connection at 1 x 1.62 Ghz. System hangs because register bus returns back 0xFFFFFFFF for all register reads after setting register DIG_BE_CNTL in dcn10_link_encoder_connect_dig_be_to_fe(). Hang occurs later when trying to do a register read. [How] At the start of the emulation, dc_link_set_preferred_link_settings() and dp_retrain_link_dp_test() is called, even though it is connected using a passive dongle. Add an extra condition in dp_retrain_link_dp_test() to check for link->dongle_max_pix_clk > 0. This is the only way we know if the connection is using passive dongle so we don't retrain DP. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: swap system aperture high/lowJun Lei
[why] Currently logical values are swapped in HW, causing system aperture to be undefined, so VA and PA cannot co-exist [how] program values correctly Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Set one 4:2:0-related PPS field as recommended by DSC specNikola Cornij
[why] 'second_line_offset_adj' was mistakenly left at zero, even though DSC spec v1.2a recommends setting this field to 512 for 4:2:0. [how] Set 'second_line_offset_adj' to 512 for 4:2:0 and leave at zero otherwise Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Set default block_size, even in unexpected casesDmytro Laktyushkin
We're not expected to enter the default case, but not returning a default value here is incorrect. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: early return when pipe_cnt is 0 in bw validationEric Yang
[Why] Unintentionally introduced behaviour change from previous refactor, which causes clks to be 0 in no stream cases, which will cause divide by 0. [How] Skip calculation of clocks when no stream. Which is the same as old behaviour. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <tong.cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Update drm_dsc to reflect native 4.2.0 DSC specDavid Francis
[Why] Some parts of the DSC spec relating to 4.2.0 were not reflected in drm_dsc_compute_rc_parameters, causing unexpected config failures [How] Add nsl_bpg_offset and rbs_min computation Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Add aux tracing log in dceChiawen Huang
[Why] dce was re-arch'd, therefore adding aux tracing log into new dce [How] The porting from submit_channel_request/process_channel_reply of aux_engine_dce110.c Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <tong.cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: No audio endpoint for Dell MST displayHarmanprit Tatla
[Why] There are certain MST displays (i.e. Dell P2715Q) that although have the MST feature set to off may still report it is a branch device and a non-zero value for downstream port present. This can lead to us incorrectly classifying a dp dongle connection as being active and disabling the audio endpoint for the display. [How] Modified the placement and condition used to assign the is_branch_dev bit. Signed-off-by: Harmanprit Tatla <harmanprit.tatla@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: cap DCFCLK hardmin to 507 for NV10Jun Lei
[why] Due to limitation in SMU/PPLIB, it is not possible to know Fmax @ Vmin for DCFCLK. This causes issues at high display configurations where extra headroom of DCFCLK can enable P-state switching [how] Use existing override logic. If override not defined, then force min = 507 Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: move bw calc code into helpersEric Yang
[Why] For better readability and reusability [How] Move snippets of BW calculation code into helpers. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Fatemeh Darbehani <Fatemeh.Darbehani@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: 3.2.37Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: fix dsc disableDmytro Laktyushkin
A regression caused dsc to never get disabled in certain situations. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: fix up HUBBUB hw programming for VMJun Lei
[why] Some values were not being converted or bit-shifted properly for HW registers, causing black screen [how] Fix up the values before programming HW Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: 3.2.36Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Add ability to set preferred link training parameters.David Galiffi
[WHY] To add support for OS requirement to set preferred link training parameters. [HOW] Create new structure of dp link training overrides. During link training processes, these values should be used instead of the default training parameters. Signed-off-by: David Galiffi <David.Galiffi@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: initialize p_state to proper valueJun Lei
[why] On some modes SMU will be in infinite loop state at boot, this is because driver assumes p_state_support is false, but this is the opposite of the assumed boot state by SMU. we optimize away notifying SMU about no pstate, and so they will get stuck [how] when we init clk manager, init pstate to true, so it matches driver load assumption Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: use VCN firmware offset for cache windowLeo Liu
Since we are using the signed FW now, and also using PSP firmware loading, but it's still potential to break driver when loading FW directly instead of PSP, so we should add offset. Signed-off-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/ttm: use the same attributes when freeing d_page->vaddrFuqian Huang
In function __ttm_dma_alloc_page(), d_page->addr is allocated by dma_alloc_attrs() but freed with use dma_free_coherent() in __ttm_dma_free_page(). Use the correct dma_free_attrs() to free d_page->vaddr. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/powerplay: change sysfs pp_dpm_xxx format for navi10Kevin Wang
v2: set average clock value on level 1 when current clock equal min or max clock (fine grained dpm support). the navi10 gfxclk (sclk) support fine grained DPM, so use level 1 to show current dpm freq in sysfs pp_dpm_xxx Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: drop ras self testHawking Zhang
this function is not needed any more. error injection is the only way to validate ras but it can't be executed in amdgpu_ras_init, where gpu is even not initialized Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: only allow error injection to UMC IP blockHawking Zhang
error injection to other IP blocks (except UMC) will be enabled until RAS feature stablize on those IP blocks Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: disable GFX RAS by defaultHawking Zhang
GFX RAS has not been stablized yet. disable GFX ras until it is fully funcitonal. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: do not create ras debugfs/sysfs node for ASICs that don't have ↵Hawking Zhang
ras ability driver shouldn't init any ras debugfs/sysfs node for ASICs that don't have ras hardware ability Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/powerplay: report bootup clock as max supported on dpm disabledEvan Quan
With gfxclk or uclk dpm disabled, it's reasonable to report bootup clock as the max supported. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: Default disable GDS for compute VMIDsJoseph Greathouse
The GDS and GWS blocks default to allowing all VMIDs to access all entries. Graphics VMIDs can handle setting these limits when the driver launches work. However, compute workloads under HWS control don't go through the kernel driver. Instead, HWS firmware should set these limits when a process is put into a VMID slot. Disable access to these devices by default by turning off all mask bits (for OA) and setting BASE=SIZE=0 (for GDS and GWS) for all compute VMIDs. If a process wants to use these resources, they can request this from the HWS firmware (when such capabilities are enabled). HWS will then handle setting the base and limit for the process when it is assigned to a VMID. This will also prevent user kernels from getting 'stuck' in GWS by accident if they write GWS-using code but HWS firmware is not set up to handle GWS reset. Until HWS is enabled to handle GWS properly, all GWS accesses will MEM_VIOL fault the kernel. v2: Move initialization outside of SRBM mutex Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: exposing fica registers to df offsetsJonathan Kim
exposing fica registers to poll df pie data for xgmi error counters for vega20. Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com> Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/powerplay: input check for unsupported message/clock indexEvan Quan
This can avoid them to be handled in a wrong way without notice. Since not all SMU messages/clocks are supported on every SMU11 ASIC. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/powerplay: correct SW SMU valid mapping checkEvan Quan
Current implementation is not actually able to detect invalid message/table/workload mapping. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: flag arcturus as experimental for nowAlex Deucher
Current support will only work in internal engineering boards. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: drop unused function definitionsAlex Deucher
These were dropped and the headers never got cleaned up. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu:add all VCN rings into schedule request queueJames Zhu
Add all VCN instances' decode/encode/jpeg decode rings into drm_sched_rq list. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdkfd: Increase vcrat size for GPUOak Zeng
GPU cache info (part of virtual CRAT) size depends on CU number. For arcturus, CU number has been increased. So the required memory for vcrat also increases. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: enable all 8 sdma instances for Arcturus siliconLe Ma
The more 6 sdma instances work fine now with DF fix in vbios: * mmDF_PIE_AON_MiscClientsEnable(0x1c728)=0x3fe(DF_ALL_INSTANCE) [9:4]MmhubsEnable=3f (change from 0) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdkfd: Merge gfx9/arcturus trap handlers, add ACC VGPR saveJay Cornwall
ACC VGPRs are a secondary VGPR set of same size as the primary VGPRs. Save them as a block immediately following VGPRs. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: Add more detail to the VM fault printingYong Zhao
With the printing, we don't need to parse the value on our own any more. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdkfd: Add device id for real asicsOak Zeng
Add pci device ids. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: limit sdma instances to 2 for Arcturus in BU phaseLe Ma
Another 6 sdma instances do not work at present. Disable them to unblock KFD for silicon bringup as a workaround Signed-off-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: skip gfx 9 common golden settings for arctHawking Zhang
They are not needed by arct Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdkfd: Add arcturus CWSR trap handlerOak Zeng
CWSR (compute wave save/restore) is used for preempting compute queues. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18amd/powerplay: No SW XGMI dpm for Arcturus rev 2Yong Zhao
xgmi dpm is handled by the SMU. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: clean up nonexistent firmware declaration for ArcturusLe Ma
CPG firmwares are not used. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amdgpu: init gds config for arctHawking Zhang
arct has 4KB gds (4 banks inside) so the max_wave_id should be 0xfff Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 16:45:46 +0000