summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-30drm/amdgpu/powerplay: add set_mp1_state for vega10Alex Deucher
This sets the SMU into the proper state for various operations (shutdown, unload, GPU reset, etc.). Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu/powerplay: add set_mp1_state for vega20Alex Deucher
This sets the SMU into the proper state for various operations (shutdown, unload, GPU reset, etc.). Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu/powerplay: return success if set_mp1_state is not setAlex Deucher
Some asics (APUs) don't have this callback so we want to return success. Avoids spurious error messages on APUs. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu/powerplay: add a new interface to set the mp1 stateAlex Deucher
This is required for certain cases such as various GPU resets (mode1, mode2), BACO, shutdown, unload, etc. to put the SMU into the appropriate state for when the hw is re-initialized. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: add reset_method asic callback for naviAlex Deucher
Navi uses either mode1 or baco depending on various conditions. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: add reset_method asic callback for soc15Alex Deucher
APUs only support mode2 reset. dGPUs use either mode1 or baco depending on various conditions. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: add reset_method asic callback for viAlex Deucher
VI always uses the legacy pci based reset. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: add reset_method asic callback for cikAlex Deucher
CIK always uses the legacy pci based reset. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: add reset_method asic callback for siAlex Deucher
SI always uses the legacy pci based reset. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: add an asic callback to determine the reset methodAlex Deucher
Sometimes the driver may have to behave differently depending on the method we are using to reset the GPU. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/powerplay: enable SW SMU reset functionalityEvan Quan
Move SMU irq handler register to sw_init as that's totally software related. Otherwise, it will prevent SMU reset working. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/powerplay: fix null pointer dereference around dpm state relatesEvan Quan
DPM state relates are not supported on the new SW SMU ASICs. But still it's not OK to trigger null pointer dereference on accessing them. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/powerplay: minor fixes around SW SMU power and fan settingEvan Quan
Add checking for possible invalid input and null pointer. And drop redundant code. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/display: enable S/G for RAVEN chipShirish S
enables gpu_vm_support in dm and adds AMDGPU_GEM_DOMAIN_GTT as supported domain v2: Move BO placement logic into amdgpu_display_supported_domains v3: Use amdgpu_bo_validate_uswc in amdgpu_display_supported_domains. v4: amdgpu_bo_validate_uswc moved to sepperate patch. Signed-off-by: Shirish S <shirish.s@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: Add check for USWC support for amdgpu_display_supported_domainsAndrey Grodzovsky
This verifies we don't add GTT as allowed domain for APUs when USWC is disabled. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: Create helper to clear AMDGPU_GEM_CREATE_CPU_GTT_USWCAndrey Grodzovsky
Move the logic to clear AMDGPU_GEM_CREATE_CPU_GTT_USWC in amdgpu_bo_do_create into standalone helper so it can be reused in other functions. v4: Switch to return bool. v5: Fix typos. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: Fix hard hang for S/G display BOs.Andrey Grodzovsky
HW requires for caching to be unset for scanout BO mappings when the BO placement is in GTT memory. Usually the flag to unset is passed from user mode but for FB mode this was missing. v2: Keep all BO placement logic in amdgpu_display_supported_domains Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Shirish S <shirish.s@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: adding xgmi error monitoringJonathan Kim
monitor xgmi errors via mc pie status through fica registers. Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com> Reviewed-by: Kent Russell <Kent.Russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: add perfmon and fica atomics for dfJonathan Kim
adding perfmon and fica atomic operations to adhere to data fabrics finite state machine requirements for indirect register access. Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com> Reviewed-by: Kent Russell <Kent.Russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Remove dead code from gfx8/gfx9 trap handlersJay Cornwall
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Replace gfx10 trap handler with correct branchJay Cornwall
Previously submitted code was taken from an incorrect branch and was non-functional. Cc: Oak Zeng <oak.zeng@amd.com> Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-By: Oak Zeng <oak.zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Fix lost single step exceptions in gfx9 trap handlerJay Cornwall
If the trap is entered due to MODE.DEBUG_EN=1 and SAVECTX is raised concurrently the handler cannot identify the source of the exception. This causes the debugger to lose single step exception notification when a context save request arrives at the same time. When MODE.DEBUG_EN=1 and STATUS.HALT=0 (exception not already handled) jump to the second-level trap handler upon entering the trap. The second-level trap will set STATUS.HALT=1 and return to the shader. If SAVECTX was raised then control flow will return to the trap, which will then handle the context save request. Cc: Tony Tye <tony.tye@amd.com> Cc: Laurent Morichetti <laurent.morichetti@amd.com> Cc: Qingchuan Shi <qingchuan.shi@amd.com> Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Use SQC when TCP would fail in gfx9 context save.Jay Cornwall
When a wavefront raises TRAPSTS.XNACK_ERROR with STATUS.ALLOW_REPLAY=0 subsequent memory instructions have undefined behavior. In practice SQC stores continue to work but TCP stores do not. Context save is permitted to fail after XNACK error because the wavefront will be halted and subsequently terminated. However the debugger has an interest in retrieving the wavefront VGPR/LDS state. Detect the out-of-spec case and use SQC stores during context save in place of TCP stores. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu/gmc10: fix pte mytpe field error for navi14tiancyin
navi14 share same PTE format with navi10. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: tiancyin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: use VCN firmware offset for cache windowJames Zhu
Since we are using the signed FW now, and also using PSP firmware loading, but it's still potential to break driver when loading FW directly instead of PSP, so we should add offset. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/powerplay: fix temperature granularity error in smu11Kevin Wang
in this patch, drm/amd/powerplay: add callback function of get_thermal_temperature_range the driver missed temperature granularity change on other temperature. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/powerplay: some cosmetic fixesEvan Quan
Drop redundant check, duplicate check, duplicate setting and fix the return value. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/powerplay: no pptable transfer and dpms enabled with "dpm=0"Evan Quan
Honor the 'dpm' module parameter setting on SW SMU routine as what we did on previous ASICs. SMU FW loading is still proceeded even with "dpm=0". Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/display: fix a missing null check on a failed kzallocColin Ian King
Currently the allocation of config may fail and a null pointer dereference on config can occur. Fix this by added a null check on a failed allocation of config. Addresses-Coverity: ("Dereference null return") Fixes: c2cd9d04ecf0 ("drm/amd/display: Hook up calls to do stereo mux and dig programming to stereo control interface") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/radeon: Use dev_get_drvdata where possibleChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/display: Use dev_get_drvdataChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: Use dev_get_drvdata where possibleChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/display: readd -msse2 to prevent Clang from emitting libcalls to ↵Nick Desaulniers
undefined SW FP routines arch/x86/Makefile disables SSE and SSE2 for the whole kernel. The AMDGPU drivers modified in this patch re-enable SSE but not SSE2. Turn on SSE2 to support emitting double precision floating point instructions rather than calls to non-existent (usually available from gcc_s or compiler_rt) floating point helper routines for Clang. This was originally landed in: commit 10117450735c ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines") but reverted in: commit 193392ed9f69 ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"") due to bugreports from GCC builds. Add guards to only do so for Clang. Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487 Link: https://github.com/ClangBuiltLinux/linux/issues/327 Suggested-by: Sedat Dilek <sedat.dilek@gmail.com> Suggested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdkfd: Fix byte align on VegaMKent Russell
This was missed during the addition of VegaM support Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amd/powerplay: add callback function of get_thermal_temperature_rangeKevin Wang
1. the thermal temperature is asic related data, move the code logic to xxx_ppt.c. 2. replace data structure PP_TemperatureRange with smu_temperature_range. 3. change temperature uint from temp*1000 to temp (temperature uint). Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-22drm/amdgpu/smu: move fan rpm query into the asic specific codeAlex Deucher
On vega20, there is an SMU message to query it. On navi, it's fetched from the metrics table. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-22drm/amdgpu: set sdma irq src num according to sdma instancesHawking Zhang
Otherwise, it will cause driver access non-existing sdma registers in gpu reset code path Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-22drm/amd/powerplay: remove redundancy debug log in smuKevin Wang
remove redundacy debug log in smu. eg: [ 6897.969447] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled [ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled [ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled [ 6899.024114] amdgpu: [powerplay] Unsupported SMU message: 38 [ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled [ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled [ 6899.024152] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled [ 6900.078296] amdgpu: [powerplay] Unsupported SMU message: 38 [ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled [ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled [ 6900.078333] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled [ 6901.133230] amdgpu: [powerplay] Unsupported SMU message: 38 Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-22drm/amd/powerplay: custom peak clock freq for navi10Kevin Wang
v2: add function smu_default_set_performance_level as default dpm level handler. change function name smu_set_performance_level to smu_asic_set_performance_level v1: 1.NAVI10_PEAK_SCLK_XTX 1830 Mhz 2.NAVI10_PEAK_SCLK_XT 1755 Mhz 3.NAVI10_PEAK_SCLK_XL 1625 Mhz Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: handle active dongle port type is DP++ or DP caseDale Zhao
[Why]: Some active dongles have DP++ port and DP port at the same time. Current code doesn't cover DP++ case and processes as default DVI case, in which audio is disabled. Because of dual mode, DP case is also treat as DVI case for the other port. [How]: According DP 1.4 spec, add DP++ procedure similar with HDMI case. Also add None dongle type for DP case. Signed-off-by: Dale Zhao <dale.zhao@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Copy GSL groups when committing a new contextNicholas Kazlauskas
[Why] DC configures the GSL group for the pipe when pipe_split is enabled and we're switching flip types (buffered <-> immediate flip) on DCN2. In order to record what GSL group the pipe is using DC stores it in the pipe's stream_res. DM is not aware of this internal grouping, nor is DC resource. So when DM creates a dc_state context and passes it to DC the current GSL group is lost - DM never knew about it in the first place. After 3 immediate flips we run out of GSL groups and we're no longer able to correctly perform *any* flip for multi-pipe scenarios. [How] The gsl_group needs to be copied to the new context. DM has no insight into GSL grouping and could even potentially create a brand new context without referencing current hardware state. So this makes the most sense to have happen in DC. There are two places where DC can apply a new context: - dc_commit_state - dc_commit_updates_for_stream But what's shared between both of these is apply_ctx_for_surface. This logic only matters for DCN2, so it can be placed in dcn20_apply_ctx_for_surface. Before doing any locking (where the GSL group is setup) we can copy over the GSL groups before committing the new context. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersen.wu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Add debug entry to destroy disconnected edp linkLewis Huang
Add a flag to dc_debug_options to determine if a disconnected edp link should be destroyed. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: avoid power gate domains that doesn't existTony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Add SMU version field to clk_mgr_internalFatemeh Darbehani
For some platforms, we need to know SMU version for driver/SMU compatibility. This change adds that field. Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: support "dummy pstate"Jun Lei
[why] Existing support in DC for pstate only accounts for a single latency. This is sufficient when the variance of latency is small, or that pstate support isn't necessary for correct ASIC functionality. Newer ASICs violate both existing assumptions. PState support is mandatory of correct ASIC functionality, but not all latencies have to be supported. Existing code supports a "full p state" which allows memory clock to change, but is hard for DCN to support (as it requires very large buffers). New code will now fall back to a "dummy p state" support when "full p state" cannot be support. This easy p state support should always be allowed. [how] Define a new latency in socBB. Add fallback logic to support it. Note DML is also updated to ensure that fallback will always work. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: fix mpcc assert conditionEric Yang
[Why] In DCN2x asic, the MPCC status register definition changed, and our logic for assert is incorrect. disabled is valid state, where we should see idle and not busy, where as in not disabled state, we should see not idle. [How] Change assert condition to be more sensible. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: do not read link setting if edp not connectedEric Yang
[Why] Previously assume eDP sink present if connector present. Do not need to enforce this restriction. Fix issue where driver attempt to read link setting even though no edp connected. {How] Only read link setting after reading connection status. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Increase size of audios arrayTai Man
[Why] The audios array defined in "struct resource_pool" is only 6 (MAX_PIPES) but the max number of audio devices (num_audio) is 7. In some projects, it will run out of audios array. [How] Incraese the audios array size to 7. Signed-off-by: Tai Man <taiman.wong@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: 3.2.42Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: drop ASSERT() if eDP panel is not connectedZhan Liu
[Why] For boards that support eDP but do not have a physical eDP display connected an ASSERT will be thrown. This is not a critical failure and shouldn't be treated as such. [How] Drop the assertion. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 03:01:03 +0000