| Age | Commit message (Collapse) | Author |
|---|
|
Meson8 pwm type always has 4 input clocks. Some inputs may be grounded,
like in the AO domain of some SoCs.
Drop the parent number parameter and make this is constant.
This is also done to make the addition of generic meson8 compatible easier.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240221151154.26452-4-jbrunet@baylibre.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
The binding that is used up to now describe which input the PWM
channel multiplexer should pick among its possible parents,
which are hardcoded in the driver. This isn't a good binding in
the sense that it should describe hardware but not usage.
Add a new binding deprecating the old one that uses clocks in a
better way and how clocks are usually used today: The list of
clocks describe the inputs of the PWM block as they are realised
in hardware.
So deprecate the old bindings and introduce a compatible per SoC
family to replace these.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240221151154.26452-3-jbrunet@baylibre.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
s4 has been added to the compatible list while converting the Amlogic PWM
binding documentation from txt to yaml.
However, on the s4, the clock bindings have different meaning compared to
the previous SoCs.
On the previous SoCs the clock bindings used to describe which input the
PWM channel multiplexer should pick among its possible parents.
This is very much tied to the driver implementation, instead of describing
the HW for what it is. When support for the Amlogic PWM was first added,
how to deal with clocks through DT was not as clear as it nowadays.
The Linux driver now ignores this DT setting, but still relies on the
hard-coded list of clock sources.
On the s4, the input multiplexer is gone. The clock bindings actually
describe the clock as it exists, not a setting. The property has a
different meaning, even if it is still 2 clocks and it would pass the check
when support is actually added.
Also the s4 cannot work if the clocks are not provided, so the property is
no longer optional.
Finally, for once it makes sense to see the input as being numbered
somehow. No need to bother with clock-names on the s4 type of PWM.
Fixes: 43a1c4ff3977 ("dt-bindings: pwm: Convert Amlogic Meson PWM binding")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240221151154.26452-2-jbrunet@baylibre.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Simplify error handling in ->probe() function using dev_err_probe() helper
and while at it, drop error codes from the message to prevent duplication.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20240219033835.11369-5-raag.jadav@intel.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Intel Elkhart Lake PSE includes two instances of PWM as a single PCI
function with 8 channels each. Add support for the remaining channels.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Link: https://lore.kernel.org/r/20240219033835.11369-4-raag.jadav@intel.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
pcim_iomap_table() fails only if pcim_iomap_regions() fails. No need to
check for failure if the latter is already successful.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20240219033835.11369-3-raag.jadav@intel.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the greybus pwm driver to further changes of the pwm core
outlined in the commit introducing pwmchip_alloc(). There is no intended
semantical change and the driver should behave as before.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/3206ab7f49c2c1704ea69446f3b7a7d1e71200fa.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
With a later patch it becomes necessary to already now the number of PWM
lines when pwmc is allocated. So make the function not use pwmc but a
plain connection and return the number of lines instead of storing it in
pwmc. This allows to get rid of the pwm_max member.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/3efd84ac03e7dc288f20b0de20b142b6404cb1fa.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
The driver never calls gb_connection_get_data(). If there was another
caller (say the greybus core) it cannot use the value because the type
of pwmc (= struct gb_pwm_chip) is only defined in the pwm driver.
So drop the call to gb_connection_set_data().
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/bd2759c325c295f3d9f990609d97eb83a8ca88b8.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
The pwm framework already asserts to only pass a hwpwm value (= which)
less than npwm (= pwmc->pwm_max + 1). So there is no need to recheck
this condition. Drop the respective checks.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/e003bc5e8e66f27f2b8fdc525a536d865888cffe.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/7e7517527b825a18ca10cb0faa837577d4f0ec8a.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the driver for further changes that will make it harder to
determine the pwm_chip from a given gb_pwm_chip. To just not have
to do that, rework gb_pwm_activate_operation(),
gb_pwm_deactivate_operation(), gb_pwm_config_operation(),
gb_pwm_set_polarity_operation(), gb_pwm_enable_operation() and
gb_pwm_disable_operation() to take a pwm_chip. Also use the pwm_chip as
driver data instead of the gb_pwm_chip.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/ef9b346d5bab508d4ded81cf115bf244938d04f1.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm sub-driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/0be073477092eeccaac6c021cf07e38fc30c74fc.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm driver of the ti-sn65dsi86 to further changes of
the pwm core outlined in the commit introducing devm_pwmchip_alloc().
There is no intended semantical change and the driver should behave as
before.
Acked-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/a56cbaf049f5f23c0e0fe36b0799dd20189675e0.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Acked-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/10a8d55110fc48a4759e65cc19556858587e94cc.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm sub-driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/2edc3adbb2c40b76b3b3dac82de82f3036bec1d5.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-xilinx driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/7cbc32771e94103b8c1c817cfdd613d7a2fc01b9.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the driver for further changes that will drop struct
pwm_chip chip from struct xilinx_pwm_device. Use the pwm_chip as driver
data instead of the xilinx_pwm_device to get access to the pwm_chip in
xilinx_pwm_remove() without using xilinx_pwm->chip.
Link: https://lore.kernel.org/r/738b9929c1d13bde64050f8bbc4ce8d85f58cc7a.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-vt8500 driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Also convert the to_vt8500_chip() helper macro to a static inline to
get some type safety.
Link: https://lore.kernel.org/r/b203c4448db23ebad1165b7bce43ac41468c4e89.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Link: https://lore.kernel.org/r/c3c45a08f2ccb8bb13b4042c73f93064876586eb.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This simplifies converting the driver to pwmchip_alloc() as there is only
a single code line left that makes use of struct vt8500_chip::chip.
Link: https://lore.kernel.org/r/7d903b608609d46cf1ee1e06530f516f42af1ebb.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the driver for further changes that will make it harder to
determine the pwm_chip from a given vt8500_chip. To just not have to do
that, rework vt8500_pwm_busy_wait() to take a pwm_chip.
Link: https://lore.kernel.org/r/fb384c550b359e7707219f87872bcf36482875ff.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-visconti driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/24e779de69365686bb004742cd8f07cbda131212.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-twl-led driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/5bac90addb3a178ef958a2a524c6ec7e3eea3e6a.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Link: https://lore.kernel.org/r/43c35b7116a637501b51ac93ec24c00ea92ee1af.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-twol driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/c65e796d46df71cd8d0d0941921997b9501f1cb3.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Link: https://lore.kernel.org/r/f11beb6b3a398d1257219a635a78ed0b02263978.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-tiecap driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/62fbac428cae0942f8e88234bf249537fcd890a3.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Link: https://lore.kernel.org/r/9badd116d0e26a5656b222c5b4adad7e111a53c7.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the driver for further changes that will make it harder to
determine the pwm_chip from a given ehrpwm_pwm_chip. To just not have to
do that, rework ehrpwm_pwm_save_context() and
ehrpwm_pwm_restore_context() take a pwm_chip. Also use the pwm_chip as
driver data instead of the ehrpwm_pwm_chip.
Link: https://lore.kernel.org/r/79052207cdf71f0882ae13fe1a192ef6f6dba35b.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
There is already a pointer to the pwmchip, make use of it directly
instead of using the struct ehrpwm_pwm_chip *ddata just obtained from
it. This also has the advantage of not using struct
ehrpwm_pwm_chip::chip any more which will be dropped soon.
Link: https://lore.kernel.org/r/b2b06a3aabf8c04969d59ddf7ba565b303855878.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-tegra driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/af7846109c0df225126c8e5cd186b89ace70afc0.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Link: https://lore.kernel.org/r/ae92e06b49437ca7e768b1f8b405170e33948a70.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the driver for further changes that will make it harder to
determine the pwm_chip from a given ecap_pwm_chip. To just not have to
do that, rework ecap_pwm_save_context() and ecap_pwm_restore_context
take a pwm_chip. Also use the pwm_chip as driver data instead of the
ecap_pwm_chip.
Link: https://lore.kernel.org/r/ed031f201ff52c6b298de2dc81b06aad3a0207f8.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
There is already a pointer to the pwmchip, make use of it directly
instead of using the struct ecap_pwm_chip *pc just obtained from
it. This also has the advantage of not using struct ecap_pwm_chip::chip
any more which will be dropped soon.
Link: https://lore.kernel.org/r/628f4b8c4ba1321075fc1dff70453a1c79ffb814.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-tegra driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/8719be3d57b0b5cf575b312e5ff41fe0717e3a43.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the driver for further changes that will drop struct
pwm_chip chip from struct tegra_pwm_chip. Use the pwm_chip as driver
data instead of the tegra_pwm_chip to get access to the pwm_chip in
tegra_pwm_remove() without using pc->chip.
Link: https://lore.kernel.org/r/2813c63bf1317dee808f4c5c4a9411999f2d5746.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
The pwmchip stores a pointer to the parent device, so there is no need
to store another copy in driver private data. Drop struct
tegra_pwm_chip::dev and use the pwm_chip's parent pointer instead.
Link: https://lore.kernel.org/r/225f4bfcb15fb69eb818ddb71d623157c447180a.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-sunplus driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/192be7e428eff17dd922c9c0d0d168225b89bb34.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-sun4i driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/9d175b4e27878618cef2e75b6ecbf01ad5d18164.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
The driver uses three different names for variables of type
sun4i_pwm_chip:
$ git grep 'struct sun4i_pwm_chip \*' v6.8-rc1 -- drivers/pwm/pwm-sun4i.c
v6.8-rc1:drivers/pwm/pwm-sun4i.c:static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip)
v6.8-rc1:drivers/pwm/pwm-sun4i.c:static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip,
v6.8-rc1:drivers/pwm/pwm-sun4i.c:static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip,
v6.8-rc1:drivers/pwm/pwm-sun4i.c: struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
v6.8-rc1:drivers/pwm/pwm-sun4i.c:static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
v6.8-rc1:drivers/pwm/pwm-sun4i.c: struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
v6.8-rc1:drivers/pwm/pwm-sun4i.c: struct sun4i_pwm_chip *sun4ichip;
v6.8-rc1:drivers/pwm/pwm-sun4i.c: struct sun4i_pwm_chip *sun4ichip = platform_get_drvdata(pdev);
"chip" is usually reserved for variables of type struct pwm_chip. So
pick sun4ichip as common name which better matches the type name than
sun4i_pwm.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/705f54a13b59fff50eaa345d8b1e0c691345b996.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the driver for further changes that will drop struct
pwm_chip chip from struct sun4i_pwm_chip. Use the pwm_chip as driver
data instead of the sun4i_pwm_chip to get access to the pwm_chip in
sun4i_pwm_remove() without using sun4ichip->chip.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/f8e3fb96fe341ba0a4bed982aa731c5c7c355b83.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/3ddaec73f3abefb45625d0a469026fa8d13da8c0.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-stmpe driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/7e3dbf3b70126038c0ba16331ca8c07cab575bd3.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Link: https://lore.kernel.org/r/2136fbdf9b1e6bac479b935b439e2be73a003b97.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-stm32-lp driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/04af7b3d00bc932dd025200a3bf74527c29ca47a.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Link: https://lore.kernel.org/r/d79148ed49389c657b72df05758032be2b516ceb.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the driver for further changes that will drop struct
pwm_chip chip from struct stm32_pwm_lp. Use the pwm_chip as driver
data instead of the stm32_pwm_lp to get access to the pwm_chip in
stm32_pwm_lp_suspend() without using priv->chip.
Link: https://lore.kernel.org/r/df47d1aff9b529c9a4762b6ba339a18cecba1497.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
There is already a pointer to the pwmchip, make use of it directly
instead of using the struct stm32_pwm_lp *priv just obtained from
it. This also has the advantage of not using struct stm32_pwm_lp::chip
any more which will be dropped soon.
Link: https://lore.kernel.org/r/9ad2399e1a683a6344b12d7f70498393b8f8b9de.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the pwm-stm32 driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Link: https://lore.kernel.org/r/59e5dfff2b878cc8590e286572672e4f10e35380.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
