| Age | Commit message (Collapse) | Author |
|---|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix the flow for ignoring GuC SLPC efficient frequency selection (Vinay)
- Fix SDVO panel_type initialization (Jani)
- Fix display probe for IVB Q and IVB D GT2 server (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZN4yduyBU1Ev9dc7@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-08-16
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
====================
Link: https://lore.kernel.org/r/20230816204108.53819-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.
To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.
Fixes: fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.
Without this fix device/firmware does not recover unless system
is power cycled.
Fixes: 2950219d87b0 ("qede: Add basic network device support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One missing check in virtio_net_hdr_to_skb() allowed
syzbot to crash kernels again [1]
Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff),
because this magic value is used by the kernel.
[1]
general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500
Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01
RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000
RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070
RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6
R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff
FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625
__dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:727 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:750
____sys_sendmsg+0x6ac/0x940 net/socket.c:2496
___sys_sendmsg+0x135/0x1d0 net/socket.c:2550
__sys_sendmsg+0x117/0x1e0 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff27cdb34d9
Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The status of global socket memory pressure is updated when:
a) __sk_mem_raise_allocated():
enter: sk_memory_allocated(sk) > sysctl_mem[1]
leave: sk_memory_allocated(sk) <= sysctl_mem[0]
b) __sk_mem_reduce_allocated():
leave: sk_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sysctl_mem[0]
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Fixes: e1aab161e013 ("socket: initial cgroup code.")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Existing comment in the source explains why we don't want efx_init_tc()
failure to be fatal. Cited commit erroneously consolidated failure
paths causing the probe to be failed in this case.
Fixes: 7e056e2360d9 ("sfc: obtain device mac address based on firmware handle for ef100")
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In efx_init_tc(), move the setting of efx->tc->up after the
flow_indr_dev_register() call, so that if it fails, efx_fini_tc()
won't call flow_indr_dev_unregister().
Fixes: 5b2e12d51bd8 ("sfc: bind indirect blocks for TC offload on EF100")
Suggested-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/a81284d7013aba74005277bd81104e4cfbea3f6f.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the value of ZT is set via ptrace we don't disable traps for SME.
This means that when a the task has never used SME before then the value
set via ptrace will never be seen by the target task since it will
trigger a SME access trap which will flush the register state.
Disable SME traps when setting ZT, this means we also need to allocate
storage for SVE if it is not already allocated, for the benefit of
streaming SVE.
Fixes: f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 6.3.x
Link: https://lore.kernel.org/r/20230816-arm64-zt-ptrace-first-use-v2-1-00aa82847e28@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When we use NT_ARM_SSVE to either enable streaming mode or change the
vector length for a process we do not currently do anything to ensure that
there is storage allocated for the SME specific register state. If the
task had not previously used SME or we changed the vector length then
the task will not have had TIF_SME set or backing storage for ZA/ZT
allocated, resulting in inconsistent register sizes when saving state
and spurious traps which flush the newly set register state.
We should set TIF_SME to disable traps and ensure that storage is
allocated for ZA and ZT if it is not already allocated. This requires
modifying sme_alloc() to make the flush of any existing register state
optional so we don't disturb existing state for ZA and ZT.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 5.19.x
Link: https://lore.kernel.org/r/20230810-arm64-fix-ptrace-race-v1-1-a5361fad2bd6@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Kmemleak report a leak in graph_trace_open():
unreferenced object 0xffff0040b95f4a00 (size 128):
comm "cat", pid 204981, jiffies 4301155872 (age 99771.964s)
hex dump (first 32 bytes):
e0 05 e7 b4 ab 7d 00 00 0b 00 01 00 00 00 00 00 .....}..........
f4 00 01 10 00 a0 ff ff 00 00 00 00 65 00 10 00 ............e...
backtrace:
[<000000005db27c8b>] kmem_cache_alloc_trace+0x348/0x5f0
[<000000007df90faa>] graph_trace_open+0xb0/0x344
[<00000000737524cd>] __tracing_open+0x450/0xb10
[<0000000098043327>] tracing_open+0x1a0/0x2a0
[<00000000291c3876>] do_dentry_open+0x3c0/0xdc0
[<000000004015bcd6>] vfs_open+0x98/0xd0
[<000000002b5f60c9>] do_open+0x520/0x8d0
[<00000000376c7820>] path_openat+0x1c0/0x3e0
[<00000000336a54b5>] do_filp_open+0x14c/0x324
[<000000002802df13>] do_sys_openat2+0x2c4/0x530
[<0000000094eea458>] __arm64_sys_openat+0x130/0x1c4
[<00000000a71d7881>] el0_svc_common.constprop.0+0xfc/0x394
[<00000000313647bf>] do_el0_svc+0xac/0xec
[<000000002ef1c651>] el0_svc+0x20/0x30
[<000000002fd4692a>] el0_sync_handler+0xb0/0xb4
[<000000000c309c35>] el0_sync+0x160/0x180
The root cause is descripted as follows:
__tracing_open() { // 1. File 'trace' is being opened;
...
*iter->trace = *tr->current_trace; // 2. Tracer 'function_graph' is
// currently set;
...
iter->trace->open(iter); // 3. Call graph_trace_open() here,
// and memory are allocated in it;
...
}
s_start() { // 4. The opened file is being read;
...
*iter->trace = *tr->current_trace; // 5. If tracer is switched to
// 'nop' or others, then memory
// in step 3 are leaked!!!
...
}
To fix it, in s_start(), close tracer before switching then reopen the
new tracer after switching. And some tracers like 'wakeup' may not update
'iter->private' in some cases when reopen, then it should be cleared
to avoid being mistakenly closed again.
Link: https://lore.kernel.org/linux-trace-kernel/20230817125539.1646321-1-zhengyejian1@huawei.com
Fixes: d7350c3f4569 ("tracing/core: make the read callbacks reentrants")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These two patches add an ACPI HID and update the way the platform-
specific firmware identifier is extracted from the ACPI.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix new MSG_SPLICE_PAGES support in server's TCP sendmsg helper
* tag 'nfsd-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
sunrpc: set the bv_offset of first bvec in svc_tcp_sendmsg
|
|
Be more careful when tearing down the subrequests of an O_DIRECT write
as part of a retransmission.
Reported-by: Chris Mason <clm@fb.com>
Fixes: ed5d588fe47f ("NFS: Try to join page groups before an O_DIRECT retransmission")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pausing and canceling balance can race to interrupt balance lead to BUG_ON
panic in btrfs_cancel_balance. The BUG_ON condition in btrfs_cancel_balance
does not take this race scenario into account.
However, the race condition has no other side effects. We can fix that.
Reproducing it with panic trace like this:
kernel BUG at fs/btrfs/volumes.c:4618!
RIP: 0010:btrfs_cancel_balance+0x5cf/0x6a0
Call Trace:
<TASK>
? do_nanosleep+0x60/0x120
? hrtimer_nanosleep+0xb7/0x1a0
? sched_core_clone_cookie+0x70/0x70
btrfs_ioctl_balance_ctl+0x55/0x70
btrfs_ioctl+0xa46/0xd20
__x64_sys_ioctl+0x7d/0xa0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Race scenario as follows:
> mutex_unlock(&fs_info->balance_mutex);
> --------------------
> .......issue pause and cancel req in another thread
> --------------------
> ret = __btrfs_balance(fs_info);
>
> mutex_lock(&fs_info->balance_mutex);
> if (ret == -ECANCELED && atomic_read(&fs_info->balance_pause_req)) {
> btrfs_info(fs_info, "balance: paused");
> btrfs_exclop_balance(fs_info, BTRFS_EXCLOP_BALANCE_PAUSED);
> }
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: xiaoshoukui <xiaoshoukui@ruijie.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
bio_ctrl->len_to_oe_boundary is used to make sure we stay inside a zone
as we submit bios for writes. Every time we add a page to the bio, we
decrement those bytes from len_to_oe_boundary, and then we submit the
bio if we happen to hit zero.
Most of the time, len_to_oe_boundary gets set to U32_MAX.
submit_extent_page() adds pages into our bio, and the size of the bio
ends up limited by:
- Are we contiguous on disk?
- Does bio_add_page() allow us to stuff more in?
- is len_to_oe_boundary > 0?
The len_to_oe_boundary math starts with U32_MAX, which isn't page or
sector aligned, and subtracts from it until it hits zero. In the
non-zoned case, the last IO we submit before we hit zero is going to be
unaligned, triggering BUGs.
This is hard to trigger because bio_add_page() isn't going to make a bio
of U32_MAX size unless you give it a perfect set of pages and fully
contiguous extents on disk. We can hit it pretty reliably while making
large swapfiles during provisioning because the machine is freshly
booted, mostly idle, and the disk is freshly formatted. It's also
possible to trigger with reads when read_ahead_kb is set to 4GB.
The code has been clean up and shifted around a few times, but this flaw
has been lurking since the counter was added. I think the commit
24e6c8082208 ("btrfs: simplify main loop in submit_extent_page") ended
up exposing the bug.
The fix used here is to skip doing math on len_to_oe_boundary unless
we've changed it from the default U32_MAX value. bio_add_page() is the
real limit we want, and there's no reason to do extra math when block
layer is doing it for us.
Sample reproducer, note you'll need to change the path to the bdi and
device:
SUBVOL=/btrfs/swapvol
SWAPFILE=$SUBVOL/swapfile
SZMB=8192
mkfs.btrfs -f /dev/vdb
mount /dev/vdb /btrfs
btrfs subvol create $SUBVOL
chattr +C $SUBVOL
dd if=/dev/zero of=$SWAPFILE bs=1M count=$SZMB
sync
echo 4 > /proc/sys/vm/drop_caches
echo 4194304 > /sys/class/bdi/btrfs-2/read_ahead_kb
while true; do
echo 1 > /proc/sys/vm/drop_caches
echo 1 > /proc/sys/vm/drop_caches
dd of=/dev/zero if=$SWAPFILE bs=4096M count=2 iflag=fullblock
done
Fixes: 24e6c8082208 ("btrfs: simplify main loop in submit_extent_page")
CC: stable@vger.kernel.org # 6.4+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fstests with POST_MKFS_CMD="btrfstune -m" (as in the mailing list)
reported a few of the test cases failing.
The failure scenario can be summarized and simplified as follows:
$ mkfs.btrfs -fq -draid1 -mraid1 /dev/sdb1 /dev/sdb2 :0
$ btrfstune -m /dev/sdb1 :0
$ wipefs -a /dev/sdb1 :0
$ mount -o degraded /dev/sdb2 /btrfs :0
$ btrfs replace start -B -f -r 1 /dev/sdb1 /btrfs :1
STDERR:
ERROR: ioctl(DEV_REPLACE_START) failed on "/btrfs": Input/output error
[11290.583502] BTRFS warning (device sdb2): tree block 22036480 mirror 2 has bad fsid, has 99835c32-49f0-4668-9e66-dc277a96b4a6 want da40350c-33ac-4872-92a8-4948ed8c04d0
[11290.586580] BTRFS error (device sdb2): unable to fix up (regular) error at logical 22020096 on dev /dev/sdb8 physical 1048576
As above, the replace is failing because we are verifying the header with
fs_devices::fsid instead of fs_devices::metadata_uuid, despite the
metadata_uuid actually being present.
To fix this, use fs_devices::metadata_uuid. We copy fsid into
fs_devices::metadata_uuid if there is no metadata_uuid, so its fine.
Fixes: a3ddbaebc7c9 ("btrfs: scrub: introduce a helper to verify one metadata block")
CC: stable@vger.kernel.org # 6.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
loongarch"
Unifying the asm-generic headers across 32-bit and 64-bit architectures
based on the compiler provided macros was a good idea and appears to work
with all user space, but it caused a regression when building old kernels
on systems that have the new headers installed in /usr/include, as this
combination trips an inconsistency in the kernel's own tools/include
headers that are a mix of userspace and kernel-internal headers.
This affects kernel builds on arm64, riscv64 and loongarch64 systems that
might end up using the "#define __BITS_PER_LONG 32" default from the old
tools headers. Backporting the commit into stable kernels would address
this, but it would still break building kernels without that backport,
and waste time for developers trying to understand the problem.
arm64 build machines are rather common, and on riscv64 this can also
happen in practice, but loongarch64 is probably new enough to not
be used much for building old kernels, so only revert the bits
for arm64 and riscv.
Link: https://lore.kernel.org/all/20230731160402.GB1823389@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 8386f58f8deda ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 fixes for v6.5
This corrects the invalid path specifier for L3 interconnects in the CPU
nodes of SM8150 and SM8250. It corrects the compatible of the SC8180X L3
node, to pass the binding check.
The crypto core, and its DMA controller, is disabled on SM8350 to avoid
the system from crashing at boot while the issue is diagnosed.
A thermal zone node name conflict is resolved for PM8150L, on the RB5
board.
The UFS vccq voltage is corrected on the SA877P Ride platform, to
address observed stability issues.
The reg-names of the DSI phy on SC7180 are restored after an accidental
search-and-replace update.
* tag 'qcom-arm64-fixes-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
arm64: dts: qcom: sa8775p-ride: Update L4C parameters
arm64: dts: qcom: qrb5165-rb5: fix thermal zone conflict
arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
arm64: dts: qcom: sc8180x: Fix OSM L3 compatible
arm64: dts: qcom: sm8250: Fix EPSS L3 interconnect cells
arm64: dts: qcom: sm8150: Fix OSM L3 interconnect cells
Link: https://lore.kernel.org/r/20230815142042.2459048-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A fix external abort on non-linefetch for am335x that is fixed with a flush
of posted write. And two networking fixes for beaglebone mostly for revision
c3 to do phy reset with a gpio and to fix a boot time warning.
* tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
bus: ti-sysc: Flush posted write on enable before reset
Link: https://lore.kernel.org/r/pull-1692158536-457318@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Correct wifi interrupt flags for some boards, fixed wifi on Rock PI4,
disabled hs400 speeds for some boards having problems with data
intergrity and some dt property/styling fixes.
* tag 'v6.5-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
arm64: dts: rockchip: minor whitespace cleanup around '='
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: add missing space before { on indiedroid nova
arm64: dts: rockchip: correct wifi interrupt flag in Box Demo
arm64: dts: rockchip: correct wifi interrupt flag in Rock Pi 4B
arm64: dts: rockchip: correct wifi interrupt flag in eaidk-610
arm64: dts: rockchip: Drop invalid regulator-init-microvolt property
Link: https://lore.kernel.org/r/4519945.8hzESeGDPO@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
fixed register access error when switching to other tas2781 -- refresh the page
inside regmap on the switched tas2781
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230817093257.951-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
An ACPI ID has been allocated for CS35L56 ASoC devices so that they can
be instantiated from ACPI Device entries.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230817112712.16637-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use a device property "cirrus,firmware-uid" to get the unique firmware
identifier instead of using ACPI _SUB. There aren't any products that use
_SUB.
There will not usually be a _SUB in Soundwire nodes. The ACPI can use a
_DSD section for custom properties.
There is also a need to support instantiating this driver using software
nodes. This is for systems where the CS35L56 is a back-end device and the
ACPI refers only to the front-end audio device - there will not be any ACPI
references to CS35L56.
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230817112712.16637-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit ca62297b2085b5b3168bd891ca24862242c635a1.
Commit ca62297b2085 ("drm/edid: Fix csync detailed mode parsing") fixed
EDID detailed mode sync parsing. Unfortunately, there are quite a few
displays out there that have bogus (zero) sync field that are broken by
the change. Zero means analog composite sync, which is not right for
digital displays, and the modes get rejected. Regardless, it used to
work, and it needs to continue to work. Revert the change.
Rejecting modes with analog composite sync was the part that fixed the
gitlab issue 8146 [1]. We'll need to get back to the drawing board with
that.
[1] https://gitlab.freedesktop.org/drm/intel/-/issues/8146
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8789
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8930
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9044
Fixes: ca62297b2085 ("drm/edid: Fix csync detailed mode parsing")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230815101907.2900768-1-jani.nikula@intel.com
|
|
Christian reported spurious module load crashes after some of Song's
module memory layout patches.
Turns out that if the very last instruction on the very last page of the
module is a 'JMP __x86_return_thunk' then __static_call_fixup() will
trip a fault and die.
And while the module rework made this slightly more likely to happen,
it's always been possible.
Fixes: ee88d363d156 ("x86,static_call: Use alternative RET encoding")
Reported-by: Christian Bricart <christian@bricart.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lkml.kernel.org/r/20230816104419.GA982867@hirez.programming.kicks-ass.net
|
|
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: Alfred Lee <l00g33k@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the
/proc/powerpc/rtas/firmware_update interface to prepare a system
firmware update yields a BUG():
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000
REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c
CFAR: c0000000001fbd34 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP usercopy_abort+0xa0/0xb0
LR usercopy_abort+0x9c/0xb0
Call Trace:
usercopy_abort+0x9c/0xb0 (unreliable)
__check_heap_object+0x1b4/0x1d0
__check_object_size+0x2d0/0x380
rtas_flash_write+0xe4/0x250
proc_reg_write+0xfc/0x160
vfs_write+0xfc/0x4e0
ksys_write+0x90/0x160
system_call_exception+0x178/0x320
system_call_common+0x160/0x2c4
The blocks of the firmware image are copied directly from user memory
to objects allocated from flash_block_cache, so flash_block_cache must
be created using kmem_cache_create_usercopy() to mark it safe for user
access.
Fixes: 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[mpe: Trim and indent oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com
|
|
For stack-validation of a frame-pointer build, objtool validates that
every CALL instruction is preceded by a frame-setup. The new SRSO
return thunks violate this with their RSB stuffing trickery.
Extend the __fentry__ exception to also cover the embedded_insn case
used for this. This cures:
vmlinux.o: warning: objtool: srso_untrain_ret+0xd: call without frame pointer save/setup
Fixes: 4ae68b26c3ab ("objtool/x86: Fix SRSO mess")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230816115921.GH980931@hirez.programming.kicks-ass.net
|
|
nouveau_connector_create
We can't simply free the connector after calling drm_connector_init on it.
We need to clean up the drm side first.
It might not fix all regressions from commit 2b5d1c29f6c4
("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"),
but at least it fixes a memory corruption in error handling related to
that commit.
Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/
Fixes: 95983aea8003 ("drm/nouveau/disp: add connector class")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com
|
|
The cited patch change mlx5_cmd_update_root_ft() to work with multiple
peer devices. However, it didn't align the error flow as well.
Hence, Fix the error code to work with multiple peer devices.
Fixes: 222dd185833e ("{net/RDMA}/mlx5: introduce lag_for_each_peer")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.
The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.
This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 3f734b8c594b ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
While debugging another issue I noticed that the stack trace contains one
invalid entry at the end:
<idle>-0 [008] d..4. 26.484201: wake_lat: pid=0 delta=2629976084 000000009cc24024 stack=STACK:
=> __schedule+0xac6/0x1a98
=> schedule+0x126/0x2c0
=> schedule_timeout+0x150/0x2c0
=> kcompactd+0x9ca/0xc20
=> kthread+0x2f6/0x3d8
=> __ret_from_fork+0x8a/0xe8
=> 0x6b6b6b6b6b6b6b6b
This is because the code failed to add the one element containing the
number of entries to field_size.
Link: https://lkml.kernel.org/r/20230816154928.4171614-4-svens@linux.ibm.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
While debugging another issue I noticed that the stack trace output
contains the number of entries on top:
<idle>-0 [000] d..4. 203.322502: wake_lat: pid=0 delta=2268270616 stack=STACK:
=> 0x10
=> __schedule+0xac6/0x1a98
=> schedule+0x126/0x2c0
=> schedule_timeout+0x242/0x2c0
=> __wait_for_common+0x434/0x680
=> __wait_rcu_gp+0x198/0x3e0
=> synchronize_rcu+0x112/0x138
=> ring_buffer_reset_online_cpus+0x140/0x2e0
=> tracing_reset_online_cpus+0x15c/0x1d0
=> tracing_set_clock+0x180/0x1d8
=> hist_register_trigger+0x486/0x670
=> event_hist_trigger_parse+0x494/0x1318
=> trigger_process_regex+0x1d4/0x258
=> event_trigger_write+0xb4/0x170
=> vfs_write+0x210/0xad0
=> ksys_write+0x122/0x208
Fix this by skipping the first element. Also replace the pointer
logic with an index variable which is easier to read.
Link: https://lkml.kernel.org/r/20230816154928.4171614-3-svens@linux.ibm.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The current code uses a lot of casts to access the fields member in struct
synth_trace_events with different sizes. This makes the code hard to
read, and had already introduced an endianness bug. Use a union and struct
instead.
Link: https://lkml.kernel.org/r/20230816154928.4171614-2-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 00cf3d672a9dd ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The goal is to eventually have a proper documentation about all this.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814164447.GFZNpZ/64H4lENIe94@fat_crate.local
|
|
Similar to how it doesn't make sense to have UNTRAIN_RET have two
untrain calls, it also doesn't make sense for VMEXIT to have an extra
IBPB call.
This cures VMEXIT doing potentially unret+IBPB or double IBPB.
Also, the (SEV) VMEXIT case seems to have been overlooked.
Redefine the meaning of the synthetic IBPB flags to:
- ENTRY_IBPB -- issue IBPB on entry (was: entry + VMEXIT)
- IBPB_ON_VMEXIT -- issue IBPB on VMEXIT
And have 'retbleed=ibpb' set *BOTH* feature flags to ensure it retains
the previous behaviour and issues IBPB on entry+VMEXIT.
The new 'srso=ibpb_vmexit' option only sets IBPB_ON_VMEXIT.
Create UNTRAIN_RET_VM specifically for the VMEXIT case, and have that
check IBPB_ON_VMEXIT.
All this avoids having the VMEXIT case having to check both ENTRY_IBPB
and IBPB_ON_VMEXIT and simplifies the alternatives.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121149.109557833@infradead.org
|
|
Since there can only be one active return_thunk, there only needs be
one (matching) untrain_ret. It fundamentally doesn't make sense to
allow multiple untrain_ret at the same time.
Fold all the 3 different untrain methods into a single (temporary)
helper stub.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121149.042774962@infradead.org
|
|
For a more consistent namespace.
[ bp: Fixup names in the doc too. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.976236447@infradead.org
|
|
Rename the original retbleed return thunk and untrain_ret to
retbleed_return_thunk() and retbleed_untrain_ret().
No functional changes.
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.909378169@infradead.org
|
|
Use the existing configurable return thunk. There is absolute no
justification for having created this __x86_return_thunk alternative.
To clarify, the whole thing looks like:
Zen3/4 does:
srso_alias_untrain_ret:
nop2
lfence
jmp srso_alias_return_thunk
int3
srso_alias_safe_ret: // aliasses srso_alias_untrain_ret just so
add $8, %rsp
ret
int3
srso_alias_return_thunk:
call srso_alias_safe_ret
ud2
While Zen1/2 does:
srso_untrain_ret:
movabs $foo, %rax
lfence
call srso_safe_ret (jmp srso_return_thunk ?)
int3
srso_safe_ret: // embedded in movabs instruction
add $8,%rsp
ret
int3
srso_return_thunk:
call srso_safe_ret
ud2
While retbleed does:
zen_untrain_ret:
test $0xcc, %bl
lfence
jmp zen_return_thunk
int3
zen_return_thunk: // embedded in the test instruction
ret
int3
Where Zen1/2 flush the BTB entry using the instruction decoder trick
(test,movabs) Zen3/4 use BTB aliasing. SRSO adds a return sequence
(srso_safe_ret()) which forces the function return instruction to
speculate into a trap (UD2). This RET will then mispredict and
execution will continue at the return site read from the top of the
stack.
Pick one of three options at boot (evey function can only ever return
once).
[ bp: Fixup commit message uarch details and add them in a comment in
the code too. Add a comment about the srso_select_mitigation()
dependency on retbleed_select_mitigation(). Add moar ifdeffery for
32-bit builds. Add a dummy srso_untrain_ret_alias() definition for
32-bit alternatives needing the symbol. ]
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.842775684@infradead.org
|
|
This reverts commit 27dd79c00aeab36cd7542c7a4481a32549038659.
It appears MPC_SPLIT_DYNAMIC still causes problems with multiple
displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP.
This increases power usage with multiple displays, but avoids hangs.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2475
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.4.x
|
|
DCN 3.1.4 is reported to hang on s2idle entry if graphics activity
is happening during entry. This is because GFXOFF was scheduled as
delayed but RLC gets disabled in s2idle entry sequence which will
hang GFX IP if not already in GFXOFF.
To help this problem, flush any delayed work for GFXOFF early in
s2idle entry sequence to ensure that it's off when RLC is changed.
commit 4b31b92b143f ("drm/amdgpu: complete gfxoff allow signal during
suspend without delay") modified power gating flow so that if called
in s0ix that it ensured that GFXOFF wasn't put in work queue but
instead processed immediately.
This is dead code due to commit 10cb67eb8a1b ("drm/amdgpu: skip
CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly
called as part of the suspend entry code. Remove that dead code.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
GFX v11.0.1 reported fence fallback timer expired issue on
SDMA and GFX rings after S0ix resume. This is generated by
EOP interrupts are disabled when S0ix suspend but fails to
re-enable when resume because of the GFX is in GFXOFF.
[ 203.349571] [drm] Fence fallback timer expired on ring sdma0
[ 203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0
[ 203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0
For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers
to configure the fence driver interrupts for rings that belong to GFX.
The interrupts configuration will be restored by GFXOFF exit.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Return 0 when drm device alloc failed with -ENOSPC in
order to allow amdgpu drive loading. But the xcp without
drm device node assigned won't be visiable in user space.
This helps amdgpu driver loading on system which has more
than 64 nodes, the current limitation.
The proposal to add more drm nodes is discussed in public,
which will support up to 2^20 nodes totally.
kernel drm:
https://lore.kernel.org/lkml/20230724211428.3831636-1-michal.winiarski@intel.com/T/
libdrm:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/305
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update addresses of PCIE link width registers,
& link width format used to populate gpu metrics
table for smu v13.0.6
v2:
Removed ESM register update
v3:
Updated patch subject and message
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Temperature needs to be reported in millidegree Celsius.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the right metrics table version based on the firmware.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2720
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The parameter amdgpu_mcbp shall have priority against the default value
calculated from the chip version.
User could disable mcbp by setting the parameter mcbp as zero.
v2: do not trigger preemption in sw ring muxer when mcbp is disabled.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This testcase is constrived to reproduce a problem that the cpu buffers
become unavailable which is due to 'record_disabled' of array_buffer and
max_buffer being messed up.
Local test result after bugfix:
# ./ftracetest test.d/00basic/snapshot1.tc
=== Ftrace unit tests ===
[1] Snapshot and tracing_cpumask [PASS]
[2] (instance) Snapshot and tracing_cpumask [PASS]
# of passed: 2
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Link: https://lkml.kernel.org/r/20230805033816.3284594-3-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Cc: <shuah@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
