Age | Commit message (Collapse) | Author |
|
Currently on execlists, we use a local hwsp for the kernel_context,
rather than the engine's HWSP, as this is the default for execlists.
However, seqno wrap requires allocating a new HWSP cacheline, and may
require pinning a new HWSP page in the GGTT. This operation requiring
pinning in the GGTT is not allowed within the kernel_context timeline,
as doing so may require re-entering the kernel_context in order to evict
from the GGTT. As we want to avoid requiring a new HWSP for the
kernel_context, we can use the permanently pinned engine's HWSP instead.
However to do so we must prevent the use of semaphores reading the
kernel_context's HWSP, as the use of semaphores do not support rollover
onto the same cacheline. Fortunately, the kernel_context is mostly
isolated, so unlikely to give benefit to semaphores.
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210205722.794180-5-chris@chris-wilson.co.uk
|
|
We can not require that the system process a tasklet in reasonable time
(thanks be to ksoftirqd), but we can insist that having waited
sufficiently for the error interrupt to have been raised and having
kicked the tasklet, the reset has begun and the request will be marked
as in error (if not already completed).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210205722.794180-3-chris@chris-wilson.co.uk
|
|
Conversion of the printk based logging macros to the struct drm_device
based logging macros in i915/display/intel_dpio_phy.c.
This was achieved using the following coccinelle semantic patch that
matches based on the existence of a drm_i915_private device:
@@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
Note that this converts both DRM_DEBUG/DRM_DEBUG_DRIVER to drm_dbg().
Checkpatch warnings were fixed manually.
References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-13-wambui.karugax@gmail.com
|
|
Convert various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_dsi_vbt.c.
This also involves extracting the drm_i915_private device from the
intel_dsi type for use in the logging macros.
This converts DRM_DEBUG/DRM_DEBUG_DRIVER to drm_dbg().
References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-11-wambui.karugax@gmail.com
|
|
Conversion of the printk based drm logging macros to the struct
drm_device based logging macros in i915/display/intel_combo_phy.c.
This transformation was achieved using the following coccinelle script
that matches based on the existence of a drm_i915_private device
pointer:
@@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
This converts DRM_DEBUG/DRM_DEBUG_DRIVER to drm_dbg().
New checkpatch warnings were addressed manually.
References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-9-wambui.karugax@gmail.com
|
|
Conversion of instances of printk based drm logging macros to the struct
drm_device based logging macros in i915/display/intel_dpll_mgr.c.
This also involves extracting the struct drm_i915_private device pointer
from various intel types to use in the drm_device based macros.
Note that this converts DRM_DEBUG_DRIVER to drm_dbg().
References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-8-wambui.karugax@gmail.com
|
|
Replaces various instances of the printk based logging macros with the
struct drm_device based logging macros in i915/display/intel_crt.c using
the following coccinelle script that matches based on the existence of a
drm_i915_private device pointer:
@@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
Checkpatch warnings were addressed manually.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-6-wambui.karugax@gmail.com
|
|
Initial conversion of the straightforward printk based logging macros to
the struct drm_device based logging macros in
i915/display/intel_color.c.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-5-wambui.karugax@gmail.com
|
|
Conversion of the printk based drm logging macros to the struct
drm_device based logging macros in i915/display/intel_atomic.c
This change was achieved using the following coccinelle script that
matches based on the existence of a drm_i915_private device pointer:
@@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
Checkpatch warnings were fixed manually.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-4-wambui.karugax@gmail.com
|
|
Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in
i915/display/intel_dp_link_training.c.
This also involves extracting the drm_i915_private device pointer from
the intel_dp type to use in the various macros.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-3-wambui.karugax@gmail.com
|
|
We manipulate ring->head while active in i915_request_retire underneath
the timeline manipulation. We cannot rely on a stable ring->head outside
of the timeline->mutex, in particular while setting up the context for
resume and reset.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1126
Fixes: 0881954965e3 ("drm/i915: Introduce intel_context.pin_mutex for pin management")
Fixes: e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex")
References: f3c0efc9fe7a ("drm/i915/execlists: Leave resetting ring to intel_ring")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211120131.958949-1-chris@chris-wilson.co.uk
|
|
As Gen12 onwards there are HDCP instances for each transcoder
instead of port, remove the (port < PORT_E) hdcp support
limitation for platform >= Gen12.
v2:
- Nuke the comment and cosmetic changes. [Jani]
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207144116.20172-1-anshuman.gupta@intel.com
|
|
dma-bufs are device coherent, with explicit CPU synchronisation provided
via the begin/end cpu access ioctls. As the coherency of the dma-buf is
explicitly defined to be under user control, flushing any caches on
attach/detach of the dma-buf is additional work that doesn't aide the
user in the slightest.
Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dongwon Kim <dongwon.kim@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171130180702.29357-1-chris@chris-wilson.co.uk
|
|
Reduce the amount of work we do to verify client blt correctness as
currently our 0.5s subtests takes about 15s on slower devices!
v2: Grow the maximum block size until we run out of time
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210231047.810929-1-chris@chris-wilson.co.uk
|
|
A recent bspec update added an extra voltage level that we didn't have
on ICL and new criteria for selecting the level.
Bspec: 49208
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207001417.1229251-2-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Voltage level depends not only on the cdclk, but also on the DDI clock.
Last time the bspec voltage level table for EHL was updated, we only
updated the cdclk requirements, but forgot to account for the new port
clock criteria.
Bspec: 21809
Fixes: d147483884ed ("drm/i915/ehl: Update voltage level checks")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207001417.1229251-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Add a basic description about how DC3CO works to help people not
familiar with it.
While at it, I also improved the delayed work handle and function
names and removed a debug message that is ambiguous and not much
useful, no changes in behavior here.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205214945.131012-1-jose.souza@intel.com
|
|
live_preempt_hang's use of hang injection has been superseded by
live_preempt_reset's use of an non-preemptible spinner. The latter does
not require intrusive hacks into the code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200209230838.361154-2-chris@chris-wilson.co.uk
|
|
When we are forcing the error for a selftest, we don't need to capture
the GPU state (typically).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200209230838.361154-1-chris@chris-wilson.co.uk
|
|
EHL only differs from ICL on the voltage swing table for HBR2 and
HBR3.
BSpec: 21257
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205205647.64902-1-jose.souza@intel.com
|
|
Make future work slightly easier.
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204135217.21974-1-jani.nikula@intel.com
|
|
Commit 21fd23ac222f ("drm/i915: move pipe, pch and vblank enable to
encoders on DDI platforms") pushed pipe and vblank enable to encoders on
DDI platforms, however it missed the DP MST encoder. Fix it.
Fixes: 21fd23ac222f ("drm/i915: move pipe, pch and vblank enable to encoders on DDI platforms")
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reported-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Tested-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205082959.31317-1-jani.nikula@intel.com
|
|
On an allocation error path for live_hwsp_alternate, we dropped the
engine wakeref before we had even acquired it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200209131922.180287-4-chris@chris-wilson.co.uk
|
|
Recording the frequent inspection of CSB head/tail when there is
expected to be no update adds noise to the debug trace. (Not entirely
useless, but since we know the sequence of function calls, we can
surmise the function was called -- so redundant.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200209131922.180287-2-chris@chris-wilson.co.uk
|
|
In eliminating the recursion from walking the tree of signalers/waiters
for processing the hold/unhold operations, a crucial error crept in
where we looked at the parent request and not the list element when
processing the list.
Brown paper bag, much?
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1166
Fixes: 32ff621fd744 ("drm/i915/gt: Allow temporary suspension of inflight requests")
Fixes: 748317386afb ("drm/i915/execlists: Offline error capture")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200209131922.180287-1-chris@chris-wilson.co.uk
|
|
We have switched from tail manipulation to forced context restore
to implement WaIdleLiteRestore. Remove the old defines and comments.
Note: we still do emit the WA tail, and use it as our first attempt to
avoid forcing a full-restore instead of a lite-restore, we just have a
much stronger backup mechanism for repeated preemptions.
References: f26a9e959a7b ("drm/i915/gt: Detect if we miss WaIdleLiteRestore")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203163312.15475-1-mika.kuoppala@linux.intel.com
|
|
Commit 4f2a572eda67 ("drm/i915/userptr: Never allow userptr into the
mappable GGTT") made I915_GEM_MMAP_GTT IOCTLs to fail when attempted
on a userptr object in order to protect from a lockdep splat. Later
on, new mapping types were introduced by commit cc662126b413
("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET"). Those new mapping
types suffer from the same lockdep splat issue but they now succeed
when tried on top of a userptr object. Fix it.
v2: Don't play with the -ENODEV driver response (Chris)
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204162302.1299516-1-chris@chris-wilson.co.uk
|
|
Last IGT user (intel_gpu_overlay) stopped using it in October 2019 so we
are good to remove the file.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206140725.10973-1-tvrtko.ursulin@linux.intel.com
|
|
Moving the base forward since this one was so old.
New base contains fixes that we needed.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If we rewind the RING_TAIL on a context, due to a preemption event, we
must force the context restore for the RING_TAIL update to be properly
handled. Rather than note which preemption events may cause us to rewind
the tail, compare the new request's tail with the previously submitted
RING_TAIL, as it turns out that timeslicing was causing unexpected
rewinds.
<idle>-0 0d.s2 1280851190us : __execlists_submission_tasklet: 0000:00:02.0 rcs0: expired last=130:4698, prio=3, hint=3
<idle>-0 0d.s2 1280851192us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 66:119966, current 119964
<idle>-0 0d.s2 1280851195us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4698, current 4695
<idle>-0 0d.s2 1280851198us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4696, current 4695
^---- Note we unwind 2 requests from the same context
<idle>-0 0d.s2 1280851208us : __i915_request_submit: 0000:00:02.0 rcs0: fence 130:4696, current 4695
<idle>-0 0d.s2 1280851213us : __i915_request_submit: 0000:00:02.0 rcs0: fence 134:1508, current 1506
^---- But to apply the new timeslice, we have to replay the first request
before the new client can start -- the unexpected RING_TAIL rewind
<idle>-0 0d.s2 1280851219us : trace_ports: 0000:00:02.0 rcs0: submit { 130:4696*, 134:1508 }
synmark2-5425 2..s. 1280851239us : process_csb: 0000:00:02.0 rcs0: cs-irq head=5, tail=0
synmark2-5425 2..s. 1280851240us : process_csb: 0000:00:02.0 rcs0: csb[0]: status=0x00008002:0x00000000
^---- Preemption event for the ELSP update; note the lite-restore
synmark2-5425 2..s. 1280851243us : trace_ports: 0000:00:02.0 rcs0: preempted { 130:4698, 66:119966 }
synmark2-5425 2..s. 1280851246us : trace_ports: 0000:00:02.0 rcs0: promote { 130:4696*, 134:1508 }
synmark2-5425 2.... 1280851462us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4700, current 4695
synmark2-5425 2.... 1280852111us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4702, current 4695
synmark2-5425 2.Ns1 1280852296us : process_csb: 0000:00:02.0 rcs0: cs-irq head=0, tail=2
synmark2-5425 2.Ns1 1280852297us : process_csb: 0000:00:02.0 rcs0: csb[1]: status=0x00000814:0x00000000
synmark2-5425 2.Ns1 1280852299us : trace_ports: 0000:00:02.0 rcs0: completed { 130:4696!, 134:1508 }
synmark2-5425 2.Ns1 1280852301us : process_csb: 0000:00:02.0 rcs0: csb[2]: status=0x00000818:0x00000040
synmark2-5425 2.Ns1 1280852302us : trace_ports: 0000:00:02.0 rcs0: completed { 134:1508, 0:0 }
synmark2-5425 2.Ns1 1280852313us : process_csb: process_csb:2336 GEM_BUG_ON(!i915_request_completed(*execlists->active) && !reset_in_progress(execlists))
Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Referenecs: 82c69bf58650 ("drm/i915/gt: Detect if we miss WaIdleLiteRestore")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://patchwork.freedesktop.org/patch/msgid/20200207211452.2860634-1-chris@chris-wilson.co.uk
|
|
If a request is being re-run after an innocent reset, it is marked as
-EAGAIN. So only skip an engine reset if the request is marked as -EIO.
Testcase: igt/gem_ctx_exec/basic-nohangcheck
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207161602.2838218-1-chris@chris-wilson.co.uk
|
|
SIMD16 with Src0 scalar might conflict between Src1/Src2 and cause
GRF read issue. Workaround this issue by setting bit 14 in 0xe4f4
which will disable early read/src swap of Src0.
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207155138.30978-2-mika.kuoppala@linux.intel.com
|
|
Disable TEDOP clock gating flow by programming 0x20A0[19] = 1
References: HSDES#1407928979
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207155138.30978-1-mika.kuoppala@linux.intel.com
|
|
We set up a dummy ring in order to measure the size we require for our
breadcrumb emission, so that we don't have to manually count dwords! We
can pass in the kernel_context to use for this so that if required it is
known for the breadcrumb emitter, and we can reuse some details from the
kernel_context to reduce the number of temporaries we have to mock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207125827.2787472-1-chris@chris-wilson.co.uk
|
|
Do not try and dereference the i915 private before it has been allocated
and attached to the drvdata!
Fixes: 7daac72e9a3f ("drm/i915/pci: conversion to drm_device based logging macros.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207135048.2788199-1-chris@chris-wilson.co.uk
|
|
We are sanitizing firmware status and old mmio message, but
we forget to sanitize CT status.
Fixes: e85de1770385 ("drm/i915/guc: Introduce guc_is_ready")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207131938.2787828-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
As we may add new waiters to a request as it is being run, we need to
mark the list iteration as being safe for concurrent addition.
v2: Mika spotted that we used the same trick for signalers_list, so warn
the compiler about the lockless walk there as well.
Fixes: 32ff621fd744 ("drm/i915/gt: Allow temporary suspension of inflight requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207110213.2734386-1-chris@chris-wilson.co.uk
|
|
This reverts commit d2a4bb6f8bc8cf2d788adf7e59b5b52fe3a3333c.
So, turns out that this ended up just breaking things. While many
laptops incorrectly advertise themselves as supporting PWM backlight
controls, they actually will only work with DPCD backlight controls.
Unfortunately, it also seems there are a number of systems which
advertise DPCD backlight controls in their eDP DPCD but don't actually
support them. Talking with some laptop manufacturers has shown it might
be possible to probe this support via the EDID (!?!?) but I haven't been
able to confirm that this would work on any other manufacturer's
systems.
So in the mean time, we'll just revert this commit for now and go back
to the old way of doing things.
Fixes: d2a4bb6f8bc8 ("drm/i915: Don't use VBT for detecting DPCD backlight controls")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204192823.111404-2-lyude@redhat.com
|
|
Mika spotted
<4>[17436.705441] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4>[17436.705447] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.5.0+ #1
<4>[17436.705449] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3805 05/16/2018
<4>[17436.705512] RIP: 0010:__execlists_submission_tasklet+0xc4d/0x16e0 [i915]
<4>[17436.705516] Code: c5 4c 8d 60 e0 75 17 e9 8c 07 00 00 49 8b 44 24 20 49 39 c5 4c 8d 60 e0 0f 84 7a 07 00 00 49 8b 5c 24 08 49 8b 87 80 00 00 00 <48> 39 83 d8 fe ff ff 75 d9 48 8b 83 88 fe ff ff a8 01 0f 84 b6 05
<4>[17436.705518] RSP: 0018:ffffc9000012ce80 EFLAGS: 00010083
<4>[17436.705521] RAX: ffff88822ae42000 RBX: 5a5a5a5a5a5a5a5a RCX: dead000000000122
<4>[17436.705523] RDX: ffff88822ae42588 RSI: ffff8881e32a7908 RDI: ffff8881c429fd48
<4>[17436.705525] RBP: ffffc9000012cf00 R08: ffff88822ae42588 R09: 00000000fffffffe
<4>[17436.705527] R10: ffff8881c429fb80 R11: 00000000a677cf08 R12: ffff8881c42a0aa8
<4>[17436.705529] R13: ffff8881c429fd38 R14: ffff88822ae42588 R15: ffff8881c429fb80
<4>[17436.705532] FS: 0000000000000000(0000) GS:ffff88822ed00000(0000) knlGS:0000000000000000
<4>[17436.705534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[17436.705536] CR2: 00007f858c76d000 CR3: 0000000005610003 CR4: 00000000003606e0
<4>[17436.705538] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[17436.705540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
<4>[17436.705542] Call Trace:
<4>[17436.705545] <IRQ>
<4>[17436.705603] execlists_submission_tasklet+0xc0/0x130 [i915]
which is us consuming a partially initialised new waiter in
defer_requests(). We can prevent this by initialising the i915_dependency
prior to making it visible, and since we are using a concurrent
list_add/iterator mark them up to the compiler.
Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206204915.2636606-2-chris@chris-wilson.co.uk
|
|
Virtual engines are fleeting. They carry a reference count and may be freed
when their last request is retired. This makes them unsuitable for the
task of housing engine->retire.work so assert that it is not used.
Tvrtko tracked down an instance where we did indeed violate this rule.
In virtual_submit_request, we flush a completed request directly with
__i915_request_submit and this causes us to queue that request on the
veng's breadcrumb list and signal it. Leading us down a path where we
should not attach the retire.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: dc93c9b69315 ("drm/i915/gt: Schedule request retirement when signaler idles")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206204915.2636606-1-chris@chris-wilson.co.uk
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.6-2020-02-05:
amdgpu:
- EDC fixes for Arcturus
- GDDR6 memory training fixe
- Fix for reading gfx clockgating registers while in GFXOFF state
- i2c freq fixes
- Misc display fixes
- TLB invalidation fix when using semaphores
- VCN 2.5 instancing fixes
- Switch raven1 gfxoff to a blacklist
- Coreboot workaround for KV/KB
- Root cause dongle fixes for display and revert workaround
- Enable GPU reset for renoir and navi
- Navi overclocking fixes
- Fix up confusing warnings in display clock validation on raven
amdkfd:
- SDMA fix
radeon:
- Misc LUT fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206035458.3894-1-alexander.deucher@amd.com
|
|
Just a couple of fixes to Volta/Turing modesetting on some systems.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv7=eP+Ai1ouoMyYyo1xMF0pTQki=owYjJkS=NpvKQd1fg@mail.gmail.com
|
|
git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Fixes for v5.6-rc1
These are a couple of quick fixes for regressions that were found during
the first two weeks of the merge window.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206172753.2185390-1-thierry.reding@gmail.com
|
|
We already have tests that exhaustively exercise the most interesting
page-size combinations, along with tests that offer randomisation, and
so we should already be testing objects(local, system) with a varying
mix of page-sizes, which leaves igt_ppgtt_exhaust_huge providing not
much in terms of extra coverage.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206170340.102613-1-matthew.auld@intel.com
|
|
DDI select
TGL is suffering of timeouts and fifo underruns when disabling
transcoder in MST mode, this is fixed by set TRANS_DDI_MODE_SELECT to
0(HDMI mode) when clearing DDI select.
Although BSpec disable sequence don't require this step, it is a
harmless change and it is also done by Windows driver.
Anyhow HW team was notified about that but it can take some time to
documentation to be updated.
A case that always lead to those issues is:
- do a modeset enabling pipe A and pipe B in the same MST stream
leaving A as master
- disable pipe A, promote B as master doing a full modeset in A
- enable pipe A, changing the master transcoder back to A(doing a
full modeset in B)
- Pow: underruns and timeouts
The transcoders involved will only work again when complete disabled
and their power wells turned off causing a reset in their registers.
v2: Setting TRANS_DDI_MODE_SELECT to default when clearing DDI select
not anymore when disabling TRANS_DDI, both work but this one looks
more safe. (Ville comment)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203225549.152301-1-jose.souza@intel.com
|
|
Always prime the page table registers before starting the ring. Even
though we will update these to the per-context page tables during
dispatch, it is prudent to ensure that the registers always point to a
valid PD.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206014439.2137800-2-chris@chris-wilson.co.uk
|
|
The DMA direction is only used by the DMA API, so there is no use in
setting it when a buffer object isn't mapped with the DMA API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
|
|
This partially reverts the DMA API support that was recently merged
because it was causing performance regressions on older Tegra devices.
Unfortunately, the cache maintenance performed by dma_map_sg() and
dma_unmap_sg() causes performance to drop by a factor of 10.
The right solution for this would be to cache mappings for buffers per
consumer device, but that's a bit involved. Instead, we simply revert to
the old behaviour of sharing IOVA mappings when we know that devices can
do so (i.e. they share the same IOMMU domain).
Cc: <stable@vger.kernel.org> # v5.5
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
|
|
Older Tegra devices only allow addressing 32 bits of memory, so whether
or not the host1x is attached to an IOMMU doesn't matter. host1x IOMMU
attachment is only needed on devices that can address memory beyond the
32-bit boundary and where the host1x doesn't support the wide GATHER
opcode that allows it to access buffers at higher addresses.
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
|
|
Rather than flushing the submission tasklets just before we sleep, flush
before we check the request status. Ideally this gives us a moment to
process the tasklets after sleeping just before we timeout.
v2: Compromise by pushing the flush prior to the timeout, but after the
check on completion so that we do not further delay the ready client.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205095441.1769599-1-chris@chris-wilson.co.uk
|