summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-22drm/amd/display: Remove byte swapping for dmcub abm config tableWyatt Wood
[Why] Since x86 and dmcub are both little endian, byte swapping isn't necessary. Dmcu requires byte swapping as it is big endian. [How] Add flag to function definitions to determine if byte swapping is necessary. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Force watermark value propagationJoshua Aberback
[Why] The HUBBUB watermark registers are in an area that cannot be power gated, but the HUBP copies of the watermark values are in areas that can be power gated. When we power on a pipe, it will not automatically take the HUBBUB values, we need to force propagation by writing to a watermark register. [How] - new HUBBUB function to re-write current value in a WM register - touch WM register after enabling the plane in program_pipe Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Move enable fractional pwm callWyatt Wood
[Why] Dmcu init fw call has some logic to initialize abm values. Since this doesn't exist on dmcub, must find a proper place for it in the abm sequence. [How] Move enable fractional pwm call. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Add user backlight level reg writeWyatt Wood
[Why] Porting abm from dmcu to dmcub missed one register write. [How] Add this register write in the SetBacklightLevel sequence. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Correct updating logic of dcn21's pipe VM flagsDale Zhao
[Why]: Renoir's pipe VM flags are not correctly updated if pipe strategy has changed during some scenarios. It will result in watermarks mistakenly calculation, thus underflow and garbage appear. [How]: Correctly update pipe VM flags to pipes which have been populated. Signed-off-by: Dale Zhao <dale.zhao@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Remove aconnector condition check for dpcd readZhan Liu
[Why] Aconnector is not necessary to be NULL in order to read dpcd successfully. Actually if we rely on checking aconnector here, we won't be able to turn off all displays before doing display detection. That will cause some MST hubs not able to light up. [How] Remove aconnector check when turning off all displays at hardware initialization stage. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Joseph Gravenor <joseph.gravenor@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/dc: remove unused variable 'video_optimized_pixel_rates'YueHaibing
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:1017:50: warning: ‘video_optimized_pixel_rates’ defined but not used [-Wunused-const-variable=] static const struct pixel_rate_range_table_entry video_optimized_pixel_rates[] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~ commit d8cd587d2bfd ("drm/amd/display: removing MODULO change for dcn2") left behind this unused vairable, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: remove defined but not used variablesJason Yan
Fix the following gcc warning: drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/vega10_powertune.c:710:46: warning: ‘PSMGCEDCThresholdConfig_vega10’ defined but not used [-Wunused-const-variable=] static const struct vega10_didt_config_reg PSMGCEDCThresholdConfig_vega10[] = ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/vega10_powertune.c:654:46: warning: ‘PSMSEEDCThresholdConfig_Vega10’ defined but not used [-Wunused-const-variable=] static const struct vega10_didt_config_reg PSMSEEDCThresholdConfig_Vega10[] = ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: fix race between pstate and remote buffer mapJonathan Kim
Vega20 arbitrates pstate at hive level and not device level. Last peer to remote buffer unmap could drop P-State while another process is still remote buffer mapped. With this fix, P-States still needs to be disabled for now as SMU bug was discovered on synchronous P2P transfers. This should be fixed in the next FW update. Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu/display: give aux i2c buses more meaningful namesAlex Deucher
Mirror what we do for i2c display buses. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu/display: fix aux registration (v2)Alex Deucher
We were registering the aux device in the MST late_register rather than the regular one. v2: handle eDP as well Fixes: 405a1f9090d1ac ("drm/amdgpu/display: split dp connector registration (v4)") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1100 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2020-04-22drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay ↵Sandeep Raghuraman
table v0 (e.g Hawaii) Initialize thermal controller fields in the PowerPlay table for Hawaii GPUs, so that fan speeds are reported. Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22Revert "drm/amdgpu: Disable gfx off if VCN is busy"James Zhu
This reverts commit 3fded222f4bf7f4c56ef4854872a39a4de08f7a8 This is work around for vcn1 only. Currently vcn1 has separate begin_use and idle work handle. Signed-off-by: James Zhu <James.Zhu@amd.com> Tested-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: fix kernel page fault issue by ras recovery on sGPUGuchun Chen
When running ras uncorrectable error injection and triggering GPU reset on sGPU, below issue is observed. It's caused by the list uninitialized when accessing. [ 80.047227] BUG: unable to handle page fault for address: ffffffffc0f4f750 [ 80.047300] #PF: supervisor write access in kernel mode [ 80.047351] #PF: error_code(0x0003) - permissions violation [ 80.047404] PGD 12c20e067 P4D 12c20e067 PUD 12c210067 PMD 41c4ee067 PTE 404316061 [ 80.047477] Oops: 0003 [#1] SMP PTI [ 80.047516] CPU: 7 PID: 377 Comm: kworker/7:2 Tainted: G OE 5.4.0-rc7-guchchen #1 [ 80.047594] Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018 [ 80.047888] Workqueue: events amdgpu_ras_do_recovery [amdgpu] Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: John Clements <John.Clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: Disable FRU read on ArcturusKent Russell
Update the list with supported Arcturus chips, but disable for now until final list is confirmed. Ideally we can poll atombios for FRU support, instead of maintaining this list of chips, but this will enable serial number reading for supported ASICs for the time-being. Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: fix resume failed as smu table initialize early exitPrike Liang
When the amdgpu in the suspend/resume loop need notify the dpm disabled, otherwise the smu table will be uninitialize and result in resume failed. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Tested-by: Mengbing Wang <Mengbing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu/gmc: Fix spelling mistake.Rajneesh Bhardwaj
Fixes a minor typo in the file. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: cache smu fw version infoJohn Clements
reduce cmd submission to smu by caching version info Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22Revert "drm/amdgpu: use the BAR if possible in amdgpu_device_vram_access v2"Kent Russell
This reverts commit c12b84d6e0d70f1185e6daddfd12afb671791b6e. The original patch causes a RAS event and subsequent kernel hard-hang when running the KFDMemoryTest.PtraceAccessInvisibleVram on VG20 and Arcturus dmesg output at hang time: [drm] RAS event of type ERREVENT_ATHUB_INTERRUPT detected! amdgpu 0000:67:00.0: GPU reset begin! Evicting PASID 0x8000 queues Started evicting pasid 0x8000 qcm fence wait loop timeout expired The cp might be in an unrecoverable state due to an unsuccessful queues preemption Failed to evict process queues Failed to suspend process 0x8000 Finished evicting pasid 0x8000 Started restoring pasid 0x8000 Finished restoring pasid 0x8000 [drm] UVD VCPU state may lost due to RAS ERREVENT_ATHUB_INTERRUPT amdgpu: [powerplay] Failed to send message 0x26, response 0x0 amdgpu: [powerplay] Failed to set soft min gfxclk ! amdgpu: [powerplay] Failed to upload DPM Bootup Levels! amdgpu: [powerplay] Failed to send message 0x7, response 0x0 amdgpu: [powerplay] [DisableAllSMUFeatures] Failed to disable all smu features! amdgpu: [powerplay] [DisableDpmTasks] Failed to disable all smu features! amdgpu: [powerplay] [PowerOffAsic] Failed to disable DPM! [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <powerplay> failed -5 Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu/gfx9: add gfxoff quirkAlex Deucher
Fix screen corruption with firefox. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=207171 Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: set mp1 state before reloadJohn Clements
Set MP1 state to prepare for unload before reloading SMU FW Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: update psp fw loading sequenceJohn Clements
Added dedicated function to check if particular fw should be skipped from loading. Added dedicated function for SMU FW loading via PSP Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: update Arcturus smu-driver if headerEvan Quan
To fit the latest PMFW. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: properly set the dpm_enabled stateEvan Quan
On the ASIC powered down(in baco or system suspend), the dpm_enabled will be set as false. Then all access (e.g. df state setting issued on RAS error event) to SMU will be blocked. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: correct i2c eeprom init/fini sequenceEvan Quan
As data transfer may starts immediately after i2c eeprom init completed. Thus i2c eeprom should be initialized after SMU ready. And i2c data transfer should be prohibited when SMU down. That is the i2c eeprom fini sequence needs to be updated also. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: bump the NAVI10 smu-driver if versionEvan Quan
To fit the latest SMC firmware 42.53 and eliminate the warning on driver loading. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: revise the way to retrieve the board parametersEvan Quan
It can support different NV1x ASIC better. And this can guard no member got missing. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: fix the hw hang during perform system reboot and resetPrike Liang
The system reboot failed as some IP blocks enter power gate before perform hw resource destory. Meanwhile use unify interface to set device CGPG to ungate state can simplify the amdgpu poweroff or reset ungate guard. Fixes: 487eca11a321ef ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)") Signed-off-by: Prike Liang <Prike.Liang@amd.com> Tested-by: Mengbing Wang <Mengbing.Wang@amd.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: remove redundant assignment to variable dp_ref_clk_khzColin Ian King
The variable dp_ref_clk_khz is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/radeon: remove defined but not used variables in ci_dpm.cJason Yan
Fix the following gcc warning: drivers/gpu/drm/radeon/ci_dpm.c:82:36: warning: ‘defaults_saturn_pro’ defined but not used [-Wunused-const-variable=] static const struct ci_pt_defaults defaults_saturn_pro = ^~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/ci_dpm.c:68:36: warning: ‘defaults_bonaire_pro’ defined but not used [-Wunused-const-variable=] static const struct ci_pt_defaults defaults_bonaire_pro = ^~~~~~~~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/radeon: remove defined but not used 'dte_data_tahiti_le'Jason Yan
Fix the following gcc warning: drivers/gpu/drm/radeon/si_dpm.c:255:33: warning: ‘dte_data_tahiti_le’ defined but not used [-Wunused-const-variable=] static const struct si_dte_data dte_data_tahiti_le = Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu: remove dead code in si_dpm.cJason Yan
This code is dead, let's remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amd/amdgpu: remove hardcoded module name in printsAurabindo Pillai
Let format prefixes take care of printing the module name through pr_fmt and dev_fmt definitions. Signed-off-by: Aurabindo Pillai <mail@aurabindo.in> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amd/amdgpu: add print prefix for dev_* variantsAurabindo Pillai
Define dev_fmt macro for informative print messages Signed-off-by: Aurabindo Pillai <mail@aurabindo.in> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amd/amdgpu: add prefix for pr_* printsAurabindo Pillai
amdgpu uses lots of pr_* calls for printing error messages. With this prefix, errors shall be more obvious to the end use regarding its origin, and may help debugging. Prefix format: [xxx.xxxxx] amdgpu: ... Signed-off-by: Aurabindo Pillai <mail@aurabindo.in> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amd/display: code clean up in dce80_hw_sequencer.cJason Yan
Fix the following gcc warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_hw_sequencer.c:43:46: warning: ‘reg_offsets’ defined but not used [-Wunused-const-variable=] static const struct dce80_hw_seq_reg_offsets reg_offsets[] = { ^~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu/ring: simplify scheduler setup logicAlex Deucher
Set up a GPU scheduler based on the ring flag rather than the ring type. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu/kiq: add no_scheduler flag to KIQAlex Deucher
We don't want a GPU scheduler for this ring. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu/ring: add no_scheduler flagAlex Deucher
This allows IPs to flag whether a specific ring requires a GPU scheduler or not. E.g., sometimes instances of an IP are asymmetric and have different capabilities. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu/powerplay: get SMC FW size to a flexible wayLikun Gao
Get SMC fw size before backdoor loading instead of giving an certain value, as it may different for different ASIC. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu: fix wrong vram lost counter increment V2Evan Quan
Vram lost counter is wrongly increased by two during baco reset. V2: assumed vram lost for mode1 reset on all ASICs Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu: replace DRM prefix with PCI device info for GFX RASGuchun Chen
Prefix RAS message printing in GFX IP with PCI device info, which assists the debug in multiple GPU case. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu: resume kiq access debugfsYintian Tao
If there is no GPU hang, user still can access debugfs through kiq. Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Monk Liu <Monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu: refine ras related message printGuchun Chen
Prefix ras related kernel message logging with PCI device info by replacing DRM_INFO/WARN/ERROR with dev_info/warn/err. This can clearly tell user about GPU device information where ras is. And add some other ras message printing to make it more clear and friendly as well. Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu: add uncorrectable error count print in UMC ecc irq cbGuchun Chen
Uncorrectable error count printing is missed when issuing UMC UE injection. When going to the error count log function in GPU recover work thread, there is no chance to get correct error count value by last error injection and print, because the error status register is automatically cleared after reading in UMC ecc irq callback. So add such message printing in UMC ecc irq cb to be consistent with other RAS error interrupt cases. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabledSergei Lopatin
Should prevent flicker if PP_OVERDRIVE_MASK is set. bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646 bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628 Signed-off-by: Sergei Lopatin <magist3r@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amd/display: Change "error" to "dc_log" at amdgpu_dm dpcd reading stageZhan Liu
[Why] If reading dpcd happens ahead of hw initialization, then aconnector is NULL at this point. This is expected, so there is no need to output an error (which will spam dmesg.log) [How] Change type of message from "error" to "DC_LOG_DC". Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-13drm/amdgpu: restrict debugfs register access under SR-IOVYintian Tao
Under bare metal, there is no more else to take care of the GPU register access through MMIO. Under Virtualization, to access GPU register is implemented through KIQ during run-time due to world-switch. Therefore, under SR-IOV user can only access debugfs to r/w GPU registers when meets all three conditions below. - amdgpu_gpu_recovery=0 - TDR happened - in_gpu_reset=0 v2: merge amdgpu_virt_can_access_debugfs() into amdgpu_virt_enable_access_debugfs() v3: drop ret variable in amdgpu_virt_enable_access_debugfs() and directly return result Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-09drm/amdgpu: increased atom cmd timeoutJohn Clements
added macro to define timeout Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-09drm/amd/powerplay: unload mp1 for Arcturus RAS baco resetEvan Quan
This sequence is recommended by PMFW team for the baco reset with PMFW reloaded. And it seems able to address the random failure seen on Arcturus. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: John Clements <John.Clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 20:26:38 +0000