| Age | Commit message (Collapse) | Author |
|---|
|
This makes the code more compact and error handling more robust.
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20240826-adp5588_gpio_support-v11-1-3e5ac2bd31b7@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Switch to using devm_clk_get_enable() helper instead of acquiring the
clock with devm_clk_get(), enabling it, and defining and installing
a custom devm action to call clk_disable().
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Zs4UWGKt3hLjNmoP@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240827123411.431388-1-liaochen4@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert binding doc ads7846.txt to yaml format.
Additional change:
- add ref to touchscreen.yaml and spi-peripheral-props.yaml.
- use common node name touchscreen.
- sort ti properties alphabetically.
- sort common properties alphabetically.
- sort compatible string alphabetically.
- remove vcc-supply from required list.
- deprecated ti,x-min, ti,y-min
Fix below warning: arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dtb: touchscreen@0:
ti,x-min: b'\x00}' is not of type 'object', 'array', 'boolean', 'null'
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240826162302.960732-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
allocation
Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://lore.kernel.org/r/20240826045253.3503-1-shenlichuan@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Limit amount of data that can be written into an evdev instance at
a given time to 4096 bytes (170 input events) to avoid holding
evdev->mutex for too long and starving other users.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://lore.kernel.org/r/Zr5L8TUzkJcB9HcF@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The users of this driver were removed in 2013 in commit 28633c54bda6
("ARM: ux500: Rip out keypad initialisation which is no longer used").
Remove the driver as well.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Zr-gX0dfN4te_8VG@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210916153148.14045-1-caihuoqing@baidu.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert binding doc colibri-vf50-ts.txt to yaml.
Additional change:
- add ref touchscreen.yaml.
- remove standard pinctrl properties.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: /touchscreen:
failed to match any schema with compatible: ['toradex,vf50-touchscreen']
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240819142434.311760-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert binding doc ad7879.txt to yaml format.
Additional change:
- Add ref to /schemas/spi/spi-peripheral-props.yaml
- Add #gpio-cell
- Remove spi-cpol and spi-cpha in example, the place hold 'spi' can't
correct detect spi-controler.yaml. So these two properties can't
be recongnized.
Fix warning:
arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dtb:
/bus@5a000000/i2c@5a800000/touchscreen@2c: failed to match any schema with compatible: ['adi,ad7879-1']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240810143840.3615450-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The cyttsp4 touchscreen driver was contributed in 2013 and since then
has seen no updates. The driver uses platform data (no device tree
support) and there are no users of it in the mainline kernel. There were
occasional fixes to it for issues either found by static code analysis
tools or via visual inspection, but otherwise the driver is completely
untested.
Remove the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/ZrAZ2cUow_z838tp@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver does not try to power down the rails at system suspend or
when touchscreen is not in use, but rather enables regulators at probe
time. Power savings are achieved by requesting the controller to enter
low power mode.
Switch to devm_regulator_bulk_get_enable() instead of separately
requesting regulators, enabling them, and installing a custom
devm-action to disable them on unbind/remove, which simplifies the
code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAgj9rG6oVqfdoK@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver does not use legacy GPIO API, stop including this header.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAaOu_vf-cVBhRn@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver does not use legacy GPIO API, stop including this header.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAaHWNvaAfDlDfI@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Ensure that the touchscreen response has correct "report id" byte
before processing the touch data and discard other messages.
Fixes: 42370681bd46 ("Input: Add support for ILITEK Lego Series")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240805085511.43955-3-francesco@dolcini.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
For different reasons i2c transaction may fail or report id in the
message may be wrong. Avoid closing the frame in this case as it will
result in all contacts being dropped, indicating that nothing is
touching the screen anymore, while usually it is not the case.
Fixes: 42370681bd46 ("Input: Add support for ILITEK Lego Series")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240805085511.43955-2-francesco@dolcini.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Newer firmware allows to query touchpad resolution information by
reading from resolution register. Presence of resolution register is
signalled via bit 29 of the "register presence" register. On devices
that lack this resolution register we fall back to using pitch and
number of receivers data to calculate size of the sensor.
Signed-off-by: Marge Yang <marge.yang@tw.synaptics.com>
Signed-off-by: Vincent Huang <Vincent.Huang@tw.synaptics.com>
Link: https://lore.kernel.org/r/20240805083636.1381205-1-marge.yang@tw.synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This makes the code more compact and error handling more robust.
Link: https://lore.kernel.org/r/20240711172719.1248373-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Do not mark the device as wakeup-enabled by default, respect the
standard "wakeup-source" property.
Link: https://lore.kernel.org/r/20240711172719.1248373-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Instead of setting irq_set_irq_wake() directly in probe(), mark the device
as wakeup-capable, and use enable_irq_wake() and disable_irq_wake() in
suspend/resume path.
This also allows changing the wakeup setting dynamically at runtime using
/sys/devices/.../tsc2005/power/wakeup.
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240711172719.1248373-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When the driver has been converted to use gpiod API it was requesting
and asserting the reset on probe, but never deasserted it. However
because of incorrect annotations in device tree marking reset line as
active high whereas in reality it is active low, the end result was
that the chip was never reset on probe. With polarity of the reset line
now corrected this became a problem.
Fix this by calling tsc200x_reset() from tsc200x_probe() to properly
complete the reset sequence and move requesting the reset GPIO and VIO
supply closer to the point where we need to start talking to the
hardware.
Fixes: d257f2980feb ("Input: tsc2005 - convert to gpiod")
Link: https://lore.kernel.org/r/20240711172719.1248373-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Instead of hard-coding interrupt trigger rely on ACPI/DT/board code
to set it up appropriately.
Link: https://lore.kernel.org/r/20240711172719.1248373-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The chip needs to be powered up before calling tsc200x_stop_scan() which
communicates with it; move the call to enable the regulator earlier in
tsc200x_probe().
At the same time switch to using devm_regulator_get_enable() to simplify
error handling. This also makes sure that regulator is not shut off too
early when unbinding the driver.
Link: https://lore.kernel.org/r/20240711172719.1248373-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-14-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use devm_clk_get_prepared() in order to remove a clk_unprepare() in an
error handling path of the probe and from the .remove() function.
This done, the whole .remove() function can also be axed because
'input_dev' is a managed resource allocated with
devm_input_allocate_device() and we can fully rely on devm for cleaning up.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/062986b0a5105cbc61330da0e55b22c00e2c1c4f.1722062145.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This patch introduces a driver for the PixArt PS/2 touchpad, which
supports both clickpad and touchpad types.
At the same time, we extended the single data packet length to 16,
because according to the current PixArt hardware and FW design, we need
11 bytes/15 bytes to represent the complete three-finger/four-finger data.
Co-developed-by: Jon Xie <jon_xie@pixart.com>
Signed-off-by: Jon Xie <jon_xie@pixart.com>
Co-developed-by: Jay Lee <jay_lee@pixart.com>
Signed-off-by: Jay Lee <jay_lee@pixart.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20240704125243.3633569-1-zhoubinbin@loongson.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Zinitix touch controllers can use some of the sense lines for virtual
keys (like those found on many phones). Add support for those keys.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240717-zinitix-tkey-v5-2-52ea4cd4bd50@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In some configurations the touch controller can support the touch-keys.
Document the linux,keycodes property that enables those keys and
specifies the keycodes that should be used to report the key events.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240717-zinitix-tkey-v5-1-52ea4cd4bd50@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
registers
Export a sysfs interface that would allow reading and writing touchscreen
IC registers. With this interface many things can be done in usersapce
such as firmware updates. An example tool that utilizes this interface
for performing firmware updates can be found at [1].
[1] https://github.com/goodix/fwupdate_for_berlin_linux
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Link: https://lore.kernel.org/r/20240514115135.21410-1-charles.goodix@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Report input event directly on wakeup to ensure no press event is missed
when resuming from suspend.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240716000721.3485597-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Remove reference to no longer working usbb2k-api-dev@nongnu.org
mailing list.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
MCS-5000/5080 chips belong to the 1st generation of Melfas chips,
manufactured in 2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. It is likely
that the driver was (like mcs5000_ts driver) was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC), but the touchkey device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90ca ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
MCS-5000 belongs to the 1st generation of Melfas chips, manufactured in
2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. The commit
adding the driver mentioned that the driver was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC) but the touchscreen device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90ca ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use __free(kfree) cleanup facility when allocating temporary buffers
for USB transfers.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This makes the code more compact and error handling more robust.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Instead of using a single table containing information about various
touchscreens and enums to match the driver ID table data with chip
information define individual per-protocol instances of
usbtouch_device_info structure and reference them directly from
the usbtouch_devices ID table. This is simpler, safer, and uses less
memory in case some protocols are disabled.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The data in this table is shared between all instances of the
touchscreens so it should not be modified.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In preparation of splitting big usbtouch_dev_info table into separate
per-protocol structures and constifying them move process_pkt() from the
device info into main drvice structure and set it up in probe().
We can derive if we should use single- or multi-packet handling based
on presence of get_pkt_len() method.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Move the driver's ID table closer to where it is used in preparation
to it using pointers to device info/parameters instead of device type
enum.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There already exists perfectly suitable USB_DEVICE_INTERFACE_CLASS
macro, use it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Instead of manually creating driver-specific device attributes
set struct usb_driver->dev_groups pointer to have the driver core
do it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Switch to the _scoped() version introduced in commit 365130fd47af
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
In this case the err_fwnode_put label was no longer necessary and the
error code is returned directly.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-6-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Switch to the _scoped() version introduced in commit 365130fd47af
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-5-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Switch to the _scoped() version introduced in commit 365130fd47af
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-4-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Switch to the _scoped() version introduced in commit 365130fd47af
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-3-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Switch to the _scoped() version introduced in commit 365130fd47af
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
In this case the err label was no longer necessary and EINVAL is
returned directly.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-2-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Switch to the _scoped() version introduced in commit 365130fd47af
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-1-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Make scripts/ld-version.sh robust against the latest LLD
- Fix warnings in rpm-pkg with device tree support
- Fix warnings in fortify tests with KASAN
* tag 'kbuild-fixes-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fortify: fix warnings in fortify tests with KASAN
kbuild: rpm-pkg: avoid the warnings with dtb's listed twice
kbuild: Make ld-version.sh more robust against version string changes
|
