summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-10iwlwifi: fix typo in commentMordechay Goodstein
Change "anntena" to "antenna" in a comment in stats.h. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.abca200b24d6.If5ce9e8abd5034496e98e97a53c446f045438388@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: follow the new inclusive terminologyEmmanuel Grumbach
The new inclusive terminology requires to change a few terms that were used in iwlwifi. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1eb4c8625f36.I1b17b68d4a8e77071da3e15ffbd902d15c1d4938@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: remove the read_nvm from iwl_run_unified_mvm_ucodeEmmanuel Grumbach
Similarly to what I did to iwl_run_init_mvm_ucode, there is no need to pass the read_nvm parameter. Either we have an NVM and we don't need to read it, or we don't and we need to read it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1b764faecfee.I2da0ada577fc16268125a4a15b5e725c18c643ee@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: avoid endless HW errors at assert timeMordechay Goodstein
Curretly we only mark HW error state "after" trying to collect HW data, but if any HW error happens while colleting HW data we go into endless loop. avoid this by setting HW error state "before" collecting HW data. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.4c7e5a87da15.Ic35b2f28ff08f7ac23143c80f224d52eb97a0454@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: enable sending/setting debug host eventMordechay Goodstein
This is used for BT node and for any user that wants to control what events would be send from FW to the driver. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.a9dba2daca59.I2b18bccf0d409f1517c3e2841b667014f9dafc24@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: add support for 6GHzLuca Coelho
Add support to the 6GHz band (aka. Ultra High Band or UHB). This allows us to scan and connect to channels in that band, including all the relevant features, such as preferred scan channels, colocated channels etc. Co-developed-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Co-developed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Co-developed-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Tova Mussai <tova.mussai@intel.com> Co-developed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Co-developed-by: Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com> Signed-off-by: Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000657.0fdbfc3d7352.Idb648536faf21716e2ab2c6d6890d3e49f719cd3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: copy iwl_he_capa for modificationsJohannes Berg
This data is not necessarily the same across devices as we may modify it due to the number of antennas and for overrides (though in practice overrides are likely to be identical), so modifying the global data is wrong. Make a copy of it in the NVM data and modify it there instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.6b4ee30c59e4.I0c30ef78b3bf727fe80b16a19c7588016d6b04bf@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: pcie: remove obsolete pre-release support codeEmmanuel Grumbach
We no longer need code that was introduced to differentiate between two early versions of 8260. We can remove this convoluted way to get the hardware version that was needed because of a bug in the register's configuration. Moreover, since we no longer need to access the PRPH registers, we no longer need to wake up the device, request ownership, etc... Remove all that. This allows us to get the rid of the obsolete comment about the AUX bus MISC address space which should have been moved when this code was moved away from here. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.4a5665ccd8a6.Iff3879405c15758ba661c430e77dc2160ddada1c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: remove the read_nvm from iwl_run_init_mvm_ucodeEmmanuel Grumbach
If we already read the NVM, we don't need to read it again. Make sure that this is the case with a WARNING. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.8e0ffce7f873.Ie526042c4d4b93d9116c90f53180cbadef0b32cb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: Init error table memory to zeroMordechay Goodstein
If case we have an error reading FW memory we get garbage (stack old data) in the report, so just initialize the table to zero. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.742786ffddba.Id7a17985f5bf6a03d3850f445ccdc611f97776ce@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: d3: do not send the WOWLAN_CONFIGURATION command for netdetectNaftali Goldstein
This command should be used only when there's a real client station. Currently it works, but since soon the driver will stop actually having an auxiliary station by default, and this command requires _some_ valid station, it needs to be removed from this flow. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.81b2acfe292b.I8c7372e6f72279e22966a2d0a9066521f9d2f1a0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: move reclaim flows to the queue fileMordechay Goodstein
Reclaim flows are bus-independent TX functions so we move it to the common place handling bus-independent tx operations used spatch rule @@ @@ ( -iwl_trans_pcie_freeze_txq_timer +iwl_trans_txq_freeze_timer | -iwl_trans_pcie_set_q_ptrs +iwl_trans_txq_set_q_ptrs | -iwl_pcie_txq_free_tfd +iwl_txq_free_tfd | -iwl_pcie_txq_progress +iwl_txq_progress | -iwl_trans_pcie_reclaim +iwl_trans_txq_reclaim ) Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.40723e92b6bf.I83cf71d9c6d989ec42f52b353f1d33f32540db59@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: fix sar profile printing issueJanie Tu
The profile shows an invalid value because the wrong format was used. A u8 value should use by %hhu, not %hhd. Fix thisit by changing it to %hhu. Signed-off-by: Janie Tu <janiex.tu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.a595be52af22.I1843c3c4f9fb32fa8d439052bd0a5ad230f292e2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: yoyo: align the write pointer to DWsRotem Saado
from AX210 generation the write pointer is in Bytes. to be align with all previous HWs convert it DWs. Signed-off-by: Rotem Saado <rotem.saado@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231351.c9a9cbef4a09.Ic7df63c617f79b7e6a95a510c51b3516bba5599f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: yoyo: add the ability to dump phy peripheryMordechay Goodstein
This enables analyzing phy/HW bugs. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231351.53bce4f8353d.Ia6944582bd2c748387aaef96755d8919c5d25dc1@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: remove all queue resources before freeMordechay Goodstein
Currently calling iwl_txq_dyn_free only deletes the queue memory/DMA but any active timers are not dealt with. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231351.69231238667c.I04c6d012d9244a73261685f8fc797a26e5c961d6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-09firmware: xilinx: Mark pm_api_features_map with static keywordZou Wei
Fix the following sparse warning: drivers/firmware/xilinx/zynqmp.c:32:1: warning: symbol 'pm_api_features_map' was not declared. Should it be static? Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1606823513-121578-1-git-send-email-zou_wei@huawei.com Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbsZhen Lei
The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node have "spi-slave" property must with "#address-cells = <0>" and "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" properties are deleted, the corresponding default values are 2 and 1. As a result, the check fails and below warnings is displayed. arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ Failed prerequisite 'spi_bus_bridge' Because the value of "#size-cells" is already defined as zero in the node "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to explicitly add "#address-cells = <0>" and keep "#size-cells" no change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201207084752.1665-2-thunder.leizhen@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09vrf: handle CONFIG_IPV6 not set for vrf_add_mac_header_if_unset()Andrea Mayer
The vrf_add_mac_header_if_unset() is defined within a conditional compilation block which depends on the CONFIG_IPV6 macro. However, the vrf_add_mac_header_if_unset() needs to be called also by IPv4 related code and when the CONFIG_IPV6 is not set, this function is missing. As a consequence, the build process stops reporting the error: ERROR: implicit declaration of function 'vrf_add_mac_header_if_unset' The problem is solved by *only* moving functions vrf_add_mac_header_if_unset() and vrf_prepare_mac_header() out of the conditional block. Reported-by: kernel test robot <lkp@intel.com> Fixes: 0489390882202 ("vrf: add mac header for tunneled packets when sniffer is attached") Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201208175210.8906-1-andrea.mayer@uniroma2.it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewaitLeon Romanovsky
If cm_create_timewait_info() fails, the timewait_info pointer will contain an error value and will be used in cm_remove_remote() later. general protection fault, probably for non-canonical address 0xdffffc0000000024: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0×0000000000000120-0×0000000000000127] CPU: 2 PID: 12446 Comm: syz-executor.3 Not tainted 5.10.0-rc5-5d4c0742a60e #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:cm_remove_remote.isra.0+0x24/0×170 drivers/infiniband/core/cm.c:978 Code: 84 00 00 00 00 00 41 54 55 53 48 89 fb 48 8d ab 2d 01 00 00 e8 7d bf 4b fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <0f> b6 04 02 48 89 ea 83 e2 07 38 d0 7f 08 84 c0 0f 85 fc 00 00 00 RSP: 0018:ffff888013127918 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: ffffc9000a18b000 RDX: 0000000000000024 RSI: ffffffff82edc573 RDI: fffffffffffffff4 RBP: 0000000000000121 R08: 0000000000000001 R09: ffffed1002624f1d R10: 0000000000000003 R11: ffffed1002624f1c R12: ffff888107760c70 R13: ffff888107760c40 R14: fffffffffffffff4 R15: ffff888107760c9c FS: 00007fe1ffcc1700(0000) GS:ffff88811a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2ff21000 CR3: 000000010f504001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: cm_destroy_id+0x189/0×15b0 drivers/infiniband/core/cm.c:1155 cma_connect_ib drivers/infiniband/core/cma.c:4029 [inline] rdma_connect_locked+0x1100/0×17c0 drivers/infiniband/core/cma.c:4107 rdma_connect+0x2a/0×40 drivers/infiniband/core/cma.c:4140 ucma_connect+0x277/0×340 drivers/infiniband/core/ucma.c:1069 ucma_write+0x236/0×2f0 drivers/infiniband/core/ucma.c:1724 vfs_write+0x220/0×830 fs/read_write.c:603 ksys_write+0x1df/0×240 fs/read_write.c:658 do_syscall_64+0x33/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation") Link: https://lore.kernel.org/r/20201204064205.145795-1-leon@kernel.org Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Reported-by: Amit Matityahu <mitm@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-09Merge tag 'iommu-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull iommu fix from Will Deacon: "Fix interrupt table length definition for AMD IOMMU. It's actually a fix for a fix, where the size of the interrupt remapping table was increased but a related constant for the size of the interrupt table was forgotten" * tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs
2020-12-09can: isotp: isotp_setsockopt(): block setsockopt on bound socketsOliver Hartkopp
The isotp socket can be widely configured in its behaviour regarding addressing types, fill-ups, receive pattern tests and link layer length. Usually all these settings need to be fixed before bind() and can not be changed afterwards. This patch adds a check to enforce the common usage pattern. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Thomas Wagner <thwa1@web.de> Link: https://lore.kernel.org/r/20201203140604.25488-2-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20201204133508.742120-3-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09ice: Add space to unknown speedSimon Perron Caissy
Add space to the end of 'Unknown' string in order to avoid concatenation with 'bps' string when formatting netdev log message. Signed-off-by: Simon Perron Caissy <simon.perron.caissy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: join format strings to same line as ice_debugJacob Keller
When printing messages with ice_debug, align the printed string to the origin line of the message in order to ease debugging and tracking messages back to their source. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: silence static analysis warningBruce Allan
sparse warns about cast to/from restricted types which is not an actual problem; silence the warning. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: cleanup misleading commentBruce Allan
The maximum Admin Queue buffer size and NVM shadow RAM sector size are both 4 Kilobytes. Some comments refer to those as 4Kb which can be confused with 4 Kilobits. Update the comments to use the commonly used KB symbol instead. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: Remove vlan_ena from vsi structureNick Nunley
vlan_ena was introduced to track whether VLAN filters are enabled on the device, but 1) checking for num_vlan > 1 already gives us this information, and is currently used in this way throughout the code 2) the logic for vlan_ena is broken when multiple VLANs are active Just remove vlan_ena and use num_vlan instead. Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: Remove gate to OROM initJeb Cramer
Remove the gate that prevents the OROM and netlist info from being populated. The NVM now has the appropriate section for software to reference the versioning info. Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: Enable Support for FW Override (E82X)Jeb Cramer
The driver is able to override the firmware when it comes to supporting a more lenient link mode. This feature was limited to E810 devices. It is now extended to E82X devices. Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: don't always return an error for Get PHY Abilities AQ commandPaul M Stillwell Jr
There are times when the driver shouldn't return an error when the Get PHY abilities AQ command (0x0600) returns an error. Instead the driver should log that the error occurred and continue on. This allows the driver to load even though the AQ command failed. The user can then later determine the reason for the failure and correct it. Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: cleanup stack hogBruce Allan
In ice_flow_add_prof_sync(), struct ice_flow_prof_params has recently grown in size hogging stack space when allocated there. Hogging stack space should be avoided. Change allocation to be on the heap when needed. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Harikumar Bokkena <harikumarx.bokkena@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09Merge branch 'bpf-xsk-selftests'Daniel Borkmann
Weqaar Janjua says: ==================== This patch set adds AF_XDP selftests based on veth to selftests/bpf. # Topology: # --------- # ----------- # _ | Process | _ # / ----------- \ # / | \ # / | \ # ----------- | ----------- # | Thread1 | | | Thread2 | # ----------- | ----------- # | | | # ----------- | ----------- # | xskX | | | xskY | # ----------- | ----------- # | | | # ----------- | ---------- # | vethX | --------- | vethY | # ----------- peer ---------- # | | | # namespaceX | namespaceY These selftests test AF_XDP SKB and Native/DRV modes using veth Virtual Ethernet interfaces. The test program contains two threads, each thread is single socket with a unique UMEM. It validates in-order packet delivery and packet content by sending packets to each other. Prerequisites setup by script test_xsk.sh: Set up veth interfaces as per the topology shown ^^: * setup two veth interfaces and one namespace ** veth<xxxx> in root namespace ** veth<yyyy> in af_xdp<xxxx> namespace ** namespace af_xdp<xxxx> * create a spec file veth.spec that includes this run-time configuration *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid conflict with any existing interface Adds xsk framework test to validate veth xdp DRV and SKB modes. The following tests are provided: 1. AF_XDP SKB mode Generic mode XDP is driver independent, used when the driver does not have support for XDP. Works on any netdevice using sockets and generic XDP path. XDP hook from netif_receive_skb(). a. nopoll - soft-irq processing b. poll - using poll() syscall c. Socket Teardown Create a Tx and a Rx socket, Tx from one socket, Rx on another. Destroy both sockets, then repeat multiple times. Only nopoll mode is used d. Bi-directional Sockets Configure sockets as bi-directional tx/rx sockets, sets up fill and completion rings on each socket, tx/rx in both directions. Only nopoll mode is used 2. AF_XDP DRV/Native mode Works on any netdevice with XDP_REDIRECT support, driver dependent. Processes packets before SKB allocation. Provides better performance than SKB. Driver hook available just after DMA of buffer descriptor. a. nopoll b. poll c. Socket Teardown d. Bi-directional Sockets * Only copy mode is supported because veth does not currently support zero-copy mode Total tests: 8 Flow: * Single process spawns two threads: Tx and Rx * Each of these two threads attach to a veth interface within their assigned namespaces * Each thread creates one AF_XDP socket connected to a unique umem for each veth interface * Tx thread transmits 10k packets from veth<xxxx> to veth<yyyy> * Rx thread verifies if all 10k packets were received and delivered in-order, and have the right content v2 changes: * Move selftests/xsk to selftests/bpf * Remove Makefiles under selftests/xsk, and utilize selftests/bpf/Makefile v3 changes: * merge all test scripts test_xsk_*.sh into test_xsk.sh v4 changes: * merge xsk_env.sh into xsk_prereqs.sh * test_xsk.sh add cliarg -c for color-coded output * test_xsk.sh PREREQUISITES disables IPv6 on veth interfaces * test_xsk.sh PREREQUISITES adds xsk framework test * test_xsk.sh is independently executable * xdpxceiver.c Tx/Rx validates only IPv4 packets with TOS 0x9, ignores others ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2020-12-09selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRVWeqaar Janjua
Adds following tests: 1. AF_XDP SKB mode d. Bi-directional Sockets Configure sockets as bi-directional tx/rx sockets, sets up fill and completion rings on each socket, tx/rx in both directions. Only nopoll mode is used 2. AF_XDP DRV/Native mode d. Bi-directional Sockets * Only copy mode is supported because veth does not currently support zero-copy mode Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Yonghong Song <yhs@fb.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20201207215333.11586-6-weqaar.a.janjua@intel.com
2020-12-09selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRVWeqaar Janjua
Adds following tests: 1. AF_XDP SKB mode c. Socket Teardown Create a Tx and a Rx socket, Tx from one socket, Rx on another. Destroy both sockets, then repeat multiple times. Only nopoll mode is used 2. AF_XDP DRV/Native mode c. Socket Teardown * Only copy mode is supported because veth does not currently support zero-copy mode Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Yonghong Song <yhs@fb.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20201207215333.11586-5-weqaar.a.janjua@intel.com
2020-12-09selftests/bpf: Xsk selftests - DRV POLL, NOPOLLWeqaar Janjua
Adds following tests: 2. AF_XDP DRV/Native mode Works on any netdevice with XDP_REDIRECT support, driver dependent. Processes packets before SKB allocation. Provides better performance than SKB. Driver hook available just after DMA of buffer descriptor. a. nopoll b. poll * Only copy mode is supported because veth does not currently support zero-copy mode Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Yonghong Song <yhs@fb.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20201207215333.11586-4-weqaar.a.janjua@intel.com
2020-12-09selftests/bpf: Xsk selftests - SKB POLL, NOPOLLWeqaar Janjua
Adds following tests: 1. AF_XDP SKB mode Generic mode XDP is driver independent, used when the driver does not have support for XDP. Works on any netdevice using sockets and generic XDP path. XDP hook from netif_receive_skb(). a. nopoll - soft-irq processing b. poll - using poll() syscall Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Yonghong Song <yhs@fb.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20201207215333.11586-3-weqaar.a.janjua@intel.com
2020-12-09selftests/bpf: Xsk selftests frameworkWeqaar Janjua
This patch adds AF_XDP selftests framework under selftests/bpf. Topology: --------- ----------- ----------- | xskX | --------- | xskY | ----------- | ----------- | | | ----------- | ---------- | vethX | --------- | vethY | ----------- peer ---------- | | | namespaceX | namespaceY Prerequisites setup by script test_xsk.sh: Set up veth interfaces as per the topology shown ^^: * setup two veth interfaces and one namespace ** veth<xxxx> in root namespace ** veth<yyyy> in af_xdp<xxxx> namespace ** namespace af_xdp<xxxx> * create a spec file veth.spec that includes this run-time configuration *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid conflict with any existing interface * tests the veth and xsk layers of the topology Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Yonghong Song <yhs@fb.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20201207215333.11586-2-weqaar.a.janjua@intel.com
2020-12-09Merge branch 'bpf-xdp-offload-fixes'Daniel Borkmann
Toke Høiland-Jørgensen says: ==================== This series restores the test_offload.py selftest to working order. It seems a number of subtle behavioural changes have crept into various subsystems which broke test_offload.py in a number of ways. Most of these are fairly benign changes where small adjustments to the test script seems to be the best fix, but one is an actual kernel bug that I've observed in the wild caused by a bad interaction between xdp_attachment_flags_ok() and the rework of XDP program handling in the core netdev code. Patch 1 fixes the bug by removing xdp_attachment_flags_ok(), and the reminder of the patches are adjustments to test_offload.py, including a new feature for netdevsim to force a BPF verification fail. Please see the individual patches for details. Changelog: v4: - Accidentally truncated the Fixes: hashes in patches 3/4 to 11 chars v3: - Add Fixes: tags v2: - Replace xdp_attachment_flags_ok() with a check in dev_xdp_attach() - Better packing of struct nsim_dev ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2020-12-09selftests/bpf/test_offload.py: Filter bpftool internal map when counting mapsToke Høiland-Jørgensen
A few of the tests in test_offload.py expects to see a certain number of maps created, and checks this by counting the number of maps returned by bpftool. There is already a filter that will remove any maps already there at the beginning of the test, but bpftool now creates a map for the PID iterator rodata on each invocation, which makes the map count wrong. Fix this by also filtering the pid_iter.rodata map by name when counting. Fixes: d53dee3fe013 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752226387.110217.9887866138149423444.stgit@toke.dk
2020-12-09selftests/bpf/test_offload.py: Reset ethtool features after failed settingToke Høiland-Jørgensen
When setting the ethtool feature flag fails (as expected for the test), the kernel now tracks that the feature was requested to be 'off' and refuses to subsequently disable it again. So reset it back to 'on' so a subsequent disable (that's not supposed to fail) can succeed. Fixes: 417ec26477a5 ("selftests/bpf: add offload test based on netdevsim") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752226280.110217.10696241563705667871.stgit@toke.dk
2020-12-09selftests/bpf/test_offload.py: Fix expected case of extack messagesToke Høiland-Jørgensen
Commit 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") changed the case of some of the extack messages being returned when attaching of XDP programs failed. This broke test_offload.py, so let's fix the test to reflect this. Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752226175.110217.11214100824416344952.stgit@toke.dk
2020-12-09selftests/bpf/test_offload.py: Only check verifier log on verification failsToke Høiland-Jørgensen
Since commit 6f8a57ccf851 ("bpf: Make verifier log more relevant by default"), the verifier discards log messages for successfully-verified programs. This broke test_offload.py which is looking for a verification message from the driver callback. Change test_offload.py to use the toggle in netdevsim to make the verification fail before looking for the verification message. Fixes: 6f8a57ccf851 ("bpf: Make verifier log more relevant by default") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752226069.110217.12370824996153348073.stgit@toke.dk
2020-12-09netdevsim: Add debugfs toggle to reject BPF programs in verifierToke Høiland-Jørgensen
This adds a new debugfs toggle ('bpf_bind_verifier_accept') that can be used to make netdevsim reject BPF programs from being accepted by the verifier. If this toggle (which defaults to true) is set to false, nsim_bpf_verify_insn() will return EOPNOTSUPP on the last instruction (after outputting the 'Hello from netdevsim' verifier message). This makes it possible to check the verification callback in the driver from test_offload.py in selftests, since the verifier now clears the verifier log on a successful load, hiding the message from the driver. Fixes: 6f8a57ccf851 ("bpf: Make verifier log more relevant by default") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225964.110217.12584017165318065332.stgit@toke.dk
2020-12-09selftests/bpf/test_offload.py: Remove check for program load flags matchToke Høiland-Jørgensen
Since we just removed the xdp_attachment_flags_ok() callback, also remove the check for it in test_offload.py, and replace it with a test for the new ambiguity-avoid check when multiple programs are loaded. Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225858.110217.13036901876869496246.stgit@toke.dk
2020-12-09xdp: Remove the xdp_attachment_flags_ok() callbackToke Høiland-Jørgensen
Since commit 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device"), the XDP program attachment info is now maintained in the core code. This interacts badly with the xdp_attachment_flags_ok() check that prevents unloading an XDP program with different load flags than it was loaded with. In practice, two kinds of failures are seen: - An XDP program loaded without specifying a mode (and which then ends up in driver mode) cannot be unloaded if the program mode is specified on unload. - The dev_xdp_uninstall() hook always calls the driver callback with the mode set to the type of the program but an empty flags argument, which means the flags_ok() check prevents the program from being removed, leading to bpf prog reference leaks. The original reason this check was added was to avoid ambiguity when multiple programs were loaded. With the way the checks are done in the core now, this is quite simple to enforce in the core code, so let's add a check there and get rid of the xdp_attachment_flags_ok() callback entirely. Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225751.110217.10267659521308669050.stgit@toke.dk
2020-12-09drm/amdgpu: Initialise drm_gem_object_funcs for imported BOsAndrey Grodzovsky
For BOs imported from outside of amdgpu, setting of amdgpu_gem_object_funcs was missing in amdgpu_dma_buf_create_obj. Fix by refactoring BO creation and amdgpu_gem_object_funcs setting into single function called from both code paths. Fixes: d693def4fd1c ("drm: Remove obsolete GEM and PRIME callbacks from struct drm_driver") v2: Use use amdgpu_gem_object_create() directly v3: fix warning Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-09drm/amdgpu: fix size calculation with stolen vga memoryAlex Deucher
If we need to keep the stolen vga memory, make sure it is at least as big as the legacy vga size. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-09drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for ravenChangfeng
When using old WORKLOAD_PPLIB setting in smu10.h, there is problem that it can't be able to switch to mak gpu clk during compute workload. It needs to update WORKLOAD_PPLIB setting to fix this issue. Signed-off-by: Changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-09drm/amdkfd: Fix leak in dmabuf importFelix Kuehling
Release dmabuf reference before returning from kfd_ioctl_import_dmabuf. amdgpu_amdkfd_gpuvm_import_dmabuf takes a reference to the underlying GEM BO and doesn't keep the reference to the dmabuf wrapper. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-09drm/amdgpu: fix sdma instance fw version and feature version initStanley.Yang
each sdma instance fw_version and feature_version should be set right value when asic type isn't between SIENNA_CICHILD and CHIP_DIMGREY_CAVEFISH Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 00:03:04 +0000