summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-25staging: rts5208: Remove unnecessary braces {}Aymen Qader
This patch fixes the checkpatch.pl warning "braces {} are not necessary" in the rts5208 driver. Mostly applies to single-line return/goto if blocks. Signed-off-by: Aymen Qader <qader.aymen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: most: fix label namesChristian Gromm
This patch makes use of label names that say what the goto actually does, as recommended in the kernel documentation. Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: rtl8188eu: remove rtw_qos.hMichael Straube
There is only one struct in rtw_qos.h and it is only included from drv_types.h. Move the struct into drv_types.h to reduce the number of header files. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: rtl8188eu: remove unused rtw_scan_abort()Michael Straube
The function rtw_scan_abort() is never used, so remove it. Discovered by cppcheck. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: rtl8188eu: Remove unnecessary parenthesesNathan Chancellor
Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/staging/rtl8188eu/core/rtw_pwrctrl.c:295:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((pwrpriv->rpwm == pslv)) { ~~~~~~~~~~~~~~^~~~~~~ drivers/staging/rtl8188eu/core/rtw_pwrctrl.c:295:21: note: remove extraneous parentheses around the comparison to silence this warning if ((pwrpriv->rpwm == pslv)) { ~ ^ ~ drivers/staging/rtl8188eu/core/rtw_pwrctrl.c:295:21: note: use '=' to turn this equality comparison into an assignment if ((pwrpriv->rpwm == pslv)) { ^~ = drivers/staging/rtl8188eu/hal/odm.c:1062:27: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((pregpriv->wifi_spec == 1))/* (pmlmeinfo->HT_enable == 0)) */ ~~~~~~~~~~~~~~~~~~~~^~~~ drivers/staging/rtl8188eu/hal/odm.c:1062:27: note: remove extraneous parentheses around the comparison to silence this warning if ((pregpriv->wifi_spec == 1))/* (pmlmeinfo->HT_enable == 0)) */ ~ ^ ~ drivers/staging/rtl8188eu/hal/odm.c:1062:27: note: use '=' to turn this equality comparison into an assignment if ((pregpriv->wifi_spec == 1))/* (pmlmeinfo->HT_enable == 0)) */ ^~ = Link: https://github.com/ClangBuiltLinux/linux/issues/163 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: emxx_udc: remove unnecessary nullpointer checksArkadiusz Lis
This patch removes nullpointer checks which are redundant. container_of returns structure containing entity which we know for sure is not null, so the whole structure can not be null. Signed-off-by: Arkadiusz Lis <areklis909@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: bcm2835-camera: Remove unused headerAymen Qader
Remove the asm/cacheflush.h header include from mmal-vchiq.c. This dependency was removed in: commit 7e8dbea41032 ("staging: bcm2835-camera: Remove explicit cache flush operations") Signed-off-by: Aymen Qader <qader.aymen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: bcm2835-camera: Update TODOAymen Qader
Remove the TODO item to remove manual cache flushing from bulk_receive. This was previously done in this commit: commit 7e8dbea41032 ("staging: bcm2835-camera: Remove explicit cache flush operations") Signed-off-by: Aymen Qader <qader.aymen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: rtl8723bs: fix spelling mistake "toogle" -> "toggle"Colin Ian King
Trivial fix to spelling mistake in struct field name Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: rtl8723bs: fix spelling mistake "unvalid" -> "invalid"Colin Ian King
Trivial fix to spelling mistake in DBG_871X debug messages. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: rtl8188eu, rtl8723bs: fix spelling mistake "evet" -> "event"Colin Ian King
Trivial fix to spelling mistake in RT_TRACE message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: sm750fb: Fix typo frambuffer->framebufferAymen Qader
This patch corrects a typo (frambuffer->framebuffer) in the sm750fb_fram(e)buffer_release and sm750fb_fram(e)buffer_alloc function names. Signed-off-by: Aymen Qader <qader.aymen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: return exact error of register_netdev() from ↵Ajay Singh
wilc_netdev_init() Refactor wilc_netdev_init() to return the error code received from register_netdev() during the failure condition. Earlier discussion link [1]. https://www.spinics.net/lists/linux-wireless/msg177304.html Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: refactor wilc_set_multicast_list() functionAjay Singh
Refactor wilc_set_multicast_list() by making below changes: o use kmalloc_array o remove unnecessary res o add u8 *cur_mc o use i as index o use '%pM' extension in netdev_dbg() The below checkpatch issue is also resolved after code refactor. 'spaces preferred around that '/' (ctx:VxV)' Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: use usleep_range() in place of udelay()Ajay Singh
Changes to avoid the below checkpatch warning: 'usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt;' Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: remove unnecessary option used with ccflags-y in MakefileAjay Singh
Cleanup patch to remove -I(src) and -DWILC_ASIC_A0 option used in ccflag-y in Makefile. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: remove wilc_debugfs.c file as its not usedAjay Singh
Deleted wilc_debugfs.c file as it's not used. Earlier discussion link: [1]. https://www.spinics.net/lists/linux-wireless/msg176076.html Suggested-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: remove p2p related static variables to wilc_vif structAjay Singh
Avoid use of static variable and move them as part of private data(wilc_priv) struct. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: remove unnecessary memset in sdio_init() & wilc_spi_init()Ajay Singh
Cleanup changes to avoid unnecessary setting 'wilc->bus_data' value to zero as the buffer was allocated using kzalloc(). Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: avoid use of 'g_spi' static variableAjay Singh
Instead of using static variable 'g_spi' move it as part of 'wilc' struct. Also allocating the memory in the probe function and free is taken care in wilc_netdev_cleanup(). Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: avoid use of 'g_sdio' static variableAjay Singh
Instead of using static variable 'g_sdio' move it as part of 'wilc' struct. Also allocating the memory in the probe function and free during deinitialization. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: remove use of unnecessary 'wilc_connected_ssid' variableAjay Singh
'wilc_connected_ssid' actually used to store the BSSID information for connected BSSID. 'wilc_vif' already has 'bssid' variable to store the same information. So refactor code to remove 'wilc_connected_ssid' and instead used 'wilc_vif' struct 'bssid' element. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: avoid the use of 'hif_driver_comp' completion variableAjay Singh
Instead of using extra completion variable to handle the sync call now using msg->is_sync flag to handle the sync call. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: rename 'wilc_mac_cfg' struct to 'wilc_cfg_str_vals'Ajay Singh
Rename 'wilc_mac_cfg' struct to 'wilc_cfg_str_vals' as its more appropriate for structure to store the values of string configuration. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: refactor code to avoid static variables for config parametersAjay Singh
Refactor the code in wilc_wlan_cfg.c file to avoid the use of static variables. Move the static variables as part of wilc struct and also dynamically allocating memory for keeping those variables. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: refactor code to remove 'mac_status' from 'wilc_mac_cfg' ↵Ajay Singh
struct Refactor the code by removing use of 'mac_status' from 'wilc_mac_cfg' and only have the string type configuration values in 'wilc_mac_cfg' struct. Now fetch the value 'WID_STATUS' configuration from 'g_cfg_byte' array. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: remove unused wid from cfg structAjay Singh
Cleanup patch to remove the unused element stored in cfg struct. Removed those wid from the cfg variables whose value is not fetched(GET_CFG) from the code. In case the wid is only set to the firmware then there is need to store them as part of cfg variables, so removed the unused code. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: remove unused wid type valuesAjay Singh
Cleanup patch to remove the wid type not used in the code. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: changes 'val' type to u8 in wilc_cfg_byte structAjay Singh
Use the correct datatype for storing the byte value in 'wilc_cfg_byte' struct. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: set default value of cfg response type in ↵Ajay Singh
wilc_wlan_cfg_indicate_rx() Handle the setting of default value for 'wilc_cfg_rsp' type for all cases in wilc_wlan_cfg_indicate_rx() as the caller make use of this value to know the type of the received message. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: refactor wilc_wlan_parse_info_frame() functionAjay Singh
Return 'void' from wilc_wlan_parse_info_frame() as same constant value is returned always. Also removed the 'size' from input parameter as its not used in the function. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: change return type to 'void' for wilc_wlan_cfg_indicate_rx()Ajay Singh
Cleanup patch to use 'void' return type for wilc_wlan_cfg_indicate_rx(), as its return value is not used in caller. The value set in 'rsp' argument is used to get the success status. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: use 'void' return for wilc_wlan_txq_filter_dup_tcp_ack()Ajay Singh
Use 'void' return for wilc_wlan_txq_filter_dup_tcp_ack() as it always return value '1' and its not used by the caller. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: change return type to 'void' tcp ack filter functionsAjay Singh
Use 'void' return type for below functions as they always return '0' and their return value is not used by caller. add_tcp_pending_ack() update_tcp_session() add_tcp_pending_ack() Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: use 'void' return for wilc_wlan_txq_add_to_head()Ajay Singh
Use 'void' return for wilc_wlan_txq_add_to_head() as its always return '0' value. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: use 'void' return type for host_int_get_assoc_res_info()Ajay Singh
Change return type to 'void' for host_int_get_assoc_res_info() as its return value is not used. 'rcvd_assoc_resp_info_len' parameter value is used to know the status. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: change return type to 'void' for ↵Ajay Singh
wilc_wfi_deinit_mon_interface() Use 'void' return type for wilc_wfi_deinit_mon_interface(), as same value always return. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: change return type to 'void' for wilc_deinit_host_int()Ajay Singh
Cleanup patch to use 'void' return type for wilc_deinit_host_int(), as its return value is not used in caller. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: change return type to 'void' for lock init & deinit functionsAjay Singh
Cleanup patch to use 'void' return type for wlan_deinit_locks() & wlan_init_locks(), as same value is return. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: change return type to 'void' for wilc_wlan_set_bssid()Ajay Singh
Cleanup patch to use 'void' return type for wilc_wlan_set_bssid(), as its always returns the same value. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: change return type to 'void' for wilc_frame_register()Ajay Singh
Cleanup patch to use 'void' return type for wilc_frame_register(), as its return value is not used. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: wilc1000: Remove unnecessary pointer checkNathan Chancellor
Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/staging/wilc1000/linux_wlan.c:267:20: warning: address of 'vif->ndev->dev' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!(&vif->ndev->dev)) ~ ~~~~~~~~~~~^~~ 1 warning generated. Since this statement always evaluates to false due to the logical not, remove it. Link: https://github.com/ClangBuiltLinux/linux/issues/121 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: rtlwifi: Use proper enumerated types for Wi-Fi only interfaceNathan Chancellor
Clang warns when one enumerated type is implicitly converted to another. drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1264:34: warning: implicit conversion from enumeration type 'enum btc_chip_interface' to different enumeration type 'enum wifionly_chip_interface' [-Wenum-conversion] wifionly_cfg->chip_interface = BTC_INTF_PCI; ~ ^~~~~~~~~~~~ drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1267:34: warning: implicit conversion from enumeration type 'enum btc_chip_interface' to different enumeration type 'enum wifionly_chip_interface' [-Wenum-conversion] wifionly_cfg->chip_interface = BTC_INTF_USB; ~ ^~~~~~~~~~~~ drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1270:34: warning: implicit conversion from enumeration type 'enum btc_chip_interface' to different enumeration type 'enum wifionly_chip_interface' [-Wenum-conversion] wifionly_cfg->chip_interface = BTC_INTF_UNKNOWN; ~ ^~~~~~~~~~~~~~~~ 3 warnings generated. Use the values from the correct enumerated type, wifionly_chip_interface. BTC_INTF_UNKNOWN = WIFIONLY_INTF_UNKNOWN = 0 BTC_INTF_PCI = WIFIONLY_INTF_PCI = 1 BTC_INTF_USB = WIFIONLY_INTF_USB = 2 Link: https://github.com/ClangBuiltLinux/linux/issues/171 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25Staging: rtlwifi: remove unnecessary NULL checkKarthik Nishanth
The member regd of the struct rtl_priv is true in a boolean context. drivers/staging/rtlwifi/regd.c:413:27: warning: address of 'rtlpriv->regd' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!wiphy || !&rtlpriv->regd) ~ ~~~~~~~~~^~~~ 1 warning generated. Link: https://github.com/ClangBuiltLinux/linux/issues/170 Signed-off-by: Karthik Nishanth <nishanthkarthik@live.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: vc04_services: Remove spaces after '*'Aymen Qader
This patch fixes the checkpatch.pl error: ERROR: "foo * bar" should be "foo *bar" in the interface/vchi directory Signed-off-by: Aymen Qader <qader.aymen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: vc04_services: Remove unused macrosAymen Qader
This patch removes the macros and structs associated with the "vchi_msg_queuev_ex" function, which was previously removed in 49bec49. Also fixes the checkpatch.pl errors: ERROR: Macros with complex values should be enclosed in parentheses ERROR: space required after that ',' Signed-off-by: Aymen Qader <qader.aymen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: vc04_services: Use tabs instead of spacesAymen Qader
This patch fixes the checkpatch.pl error: ERROR: code indent should use tabs where possible in the interface/vchi directory Signed-off-by: Aymen Qader <qader.aymen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: vc04_services: Fix "space prohibited"Aymen Qader
This patch fixes the checkpatch.pl error: ERROR: space prohibited after/before that open/closed parenthesis in the interface/vchi directory. Signed-off-by: Aymen Qader <qader.aymen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging: vc04_services: Remove unused vchiq_genversion scriptTuomas Tynkkynen
As far as I can tell, this has never been used. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25staging/vc04_services: Use correct cache line sizePhil Elwell
Use the compatible string in the DTB to select the correct cache line size for the SoC - 32 for BCM2835, and 64 for BCM2836 and BCM2837. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:39:14 +0000