| Age | Commit message (Collapse) | Author |
|---|
|
Modify mic-in detection threshold for better performance.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://msgid.link/r/b7614d9e38054aa6ad8efa620edb4162@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Match against the correct string to decide to add the '-sdca' postfix:
instead of codec_dai->name the correct one is component->name_prefix.
The component->name_prefix is added previously to the card->components as
hs.
Fixes: 9a9d31b149f3 ("ASoC: Intel: sof_sdw_rt_sdca_jack_common: remove -sdca for new codecs")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240513140730.27048-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix a misspelled cancellation in the comments.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240503173843.2922111-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Dell All In One (AIO) models released after 2017 use a backlight controller
board connected to an UART.
Add a small emulator to allow development and testing of
the drivers/platform/x86/dell/dell-uart-backlight.c driver for
this board, without requiring access to an actual Dell All In One.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240513144603.93874-3-hdegoede@redhat.com
|
|
Dell All In One (AIO) models released after 2017 use a backlight controller
board connected to an UART.
In DSDT this uart port will be defined as:
Name (_HID, "DELL0501")
Name (_CID, EisaId ("PNP0501")
Instead of having a separate ACPI device with an UartSerialBusV2() resource
to model the backlight-controller, which would be the standard way to do
this.
The acpi_quirk_skip_serdev_enumeration() has special handling for this
and it will make the serial port code create a serdev controller device
for the UART instead of a /dev/ttyS0 char-dev. It will also create
a dell-uart-backlight driver platform device for this driver to bind too.
This new kernel module contains 2 drivers for this:
1. A simple platform driver which creates the actual serdev device
(with the serdev controller device as parent)
2. A serdev driver for the created serdev device which exports
the backlight functionality uses a standard backlight class device.
Reported-by: Roman Bogoyev <roman@computercheck.com.au>
Tested-by: Roman Bogoyev <roman@computercheck.com.au>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Co-developed-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240513144603.93874-2-hdegoede@redhat.com
|
|
bezel touch buttons
The Xiaomi [Mi]Pad 2 has 3 menu / home / back capacitive touch-buttons
on its bottom bezel. These are backlit by LEDs attached to a TPS61158 LED
controller which is controlled by the "pwm_soc_lpss_2" PWM output.
Create a LED class device for this, using the new input-events trigger
as default trigger so that the buttons automatically light up on any
input activity.
Note alternatively a "leds_pwm" platform device could be created together
with the necessary fwnode_s_ and a fwnode link to the PWM controller.
There are 2 downsides to this approach:
1. The code would still need to pwm_get() the PWM controller to get/attach
a fwnode for the PWM controller fwnode link and setting up the necessary
fwnodes is non-trivial. So this would likely require more code then simply
registering the LED class device directly.
2. Currently the leds_pwm driver and its devicetree bindings do not support
limiting the maximum dutycycle to less then 100% which is required in this
case (the leds_pwm driver can probably be extended to allow this).
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240509141207.63570-2-hdegoede@redhat.com
|
|
Xiaomi pad2 RGB LED fwnode updates:
1. Set "label" instead "function" to change the LED classdev name from
"rgb:indicator" to "mipad2:rgb:indicator" to match the usual
triplet name format for LED classdevs.
2. Set the trigger to the new "bq27520-0-charging-orange-full-green"
powersupply trigger type for multi-color LEDs.
3. Put the fwnode link for red before green in ktd2026_node_group[] so that
multi_index becomes "red green blue".
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240504164105.114017-8-hdegoede@redhat.com
|
|
Pass a struct device pointer for x86_android_tablet_device to the board
specific init() functions, so that these functions can use this for
e.g. devm_*() functions.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240509141207.63570-1-hdegoede@redhat.com
|
|
Add new ACPI ID AMDI000B used by upcoming AMD platform to the PMC
supported list of devices.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240510103946.877307-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add new ACPI ID AMDI0105 used by upcoming AMD platform to the PMF
supported list of devices.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240510103519.876646-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The P2SB could get an invalid BAR from the BIOS, and that won't be fixed
up until pcibios_assign_resources(), which is an fs_initcall().
- Move p2sb_fs_init() to an fs_initcall_sync(). This is still early
enough to avoid a race with any dependent drivers.
- Add a check for IORESOURCE_UNSET in p2sb_valid_resource() to catch
unset BARs going forward.
- Return error values from p2sb_fs_init() so that the 'initcall_debug'
cmdline arg provides useful data.
Signed-off-by: Ben Fradella <bfradell@netapp.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240509164905.41016-1-bcfradella@proton.me
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Emits messages upon errors during probing of SAM. Hopefully this could
provide useful context to user for the purpose of diagnosis when
something miserable happen.
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Link: https://lore.kernel.org/r/20240505130800.2546640-3-weifeng.liu.z@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
As part of adding support for calling i2c_register_spd() on muxed SMBUS
segments the same message has been removed from i2c_register_spd().
However users may find it useful, therefore reintroduce it as part of
the DMI scan code.
[JD: Static variable dmi_memdev_populated_nr is only used in __init
functions, so it can be marked __initdata.]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
|
|
BPF just-in-time compiler depended on CONFIG_MODULES because it used
module_alloc() to allocate memory for the generated code.
Since code allocations are now implemented with execmem, drop dependency of
CONFIG_BPF_JIT on CONFIG_MODULES and make it select CONFIG_EXECMEM.
Suggested-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
kprobes depended on CONFIG_MODULES because it has to allocate memory for
code.
Since code allocations are now implemented with execmem, kprobes can be
enabled in non-modular kernels.
Add #ifdef CONFIG_MODULE guards for the code dealing with kprobes inside
modules, make CONFIG_KPROBES select CONFIG_EXECMEM and drop the
dependency of CONFIG_KPROBES on CONFIG_MODULES.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
[mcgrof: rebase in light of NEED_TASKS_RCU ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
There are places where CONFIG_MODULES guards the code that depends on
memory allocation being done with module_alloc().
Replace CONFIG_MODULES with CONFIG_EXECMEM in such places.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Dynamic ftrace must allocate memory for code and this was impossible
without CONFIG_MODULES.
With execmem separated from the modules code, execmem_text_alloc() is
available regardless of CONFIG_MODULES.
Remove dependency of dynamic ftrace on CONFIG_MODULES and make
CONFIG_DYNAMIC_FTRACE select CONFIG_EXECMEM in Kconfig.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
execmem does not depend on modules, on the contrary modules use
execmem.
To make execmem available when CONFIG_MODULES=n, for instance for
kprobes, split execmem_params initialization out from
arch/*/kernel/module.c and compile it when CONFIG_EXECMEM=y
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
powerpc overrides kprobes::alloc_insn_page() to remove writable
permissions when STRICT_MODULE_RWX is on.
Add definition of EXECMEM_KRPOBES to execmem_params to allow using the
generic kprobes::alloc_insn_page() with the desired permissions.
As powerpc uses breakpoint instructions to inject kprobes, it does not
need to constrain kprobe allocations to the modules area and can use the
entire vmalloc address space.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The memory allocations for kprobes and BPF on arm64 can be placed
anywhere in vmalloc address space and currently this is implemented with
overrides of alloc_insn_page() and bpf_jit_alloc_exec() in arm64.
Define EXECMEM_KPROBES and EXECMEM_BPF ranges in arm64::execmem_info and
drop overrides of alloc_insn_page() and bpf_jit_alloc_exec().
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The memory allocations for kprobes and BPF on RISC-V are not placed in
the modules area and these custom allocations are implemented with
overrides of alloc_insn_page() and bpf_jit_alloc_exec().
Define MODULES_VADDR and MODULES_END as VMALLOC_START and VMALLOC_END for
32 bit and slightly reorder execmem_params initialization to support both
32 and 64 bit variants, define EXECMEM_KPROBES and EXECMEM_BPF ranges in
riscv::execmem_params and drop overrides of alloc_insn_page() and
bpf_jit_alloc_exec().
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Extend execmem parameters to accommodate more complex overrides of
module_alloc() by architectures.
This includes specification of a fallback range required by arm, arm64
and powerpc, EXECMEM_MODULE_DATA type required by powerpc, support for
allocation of KASAN shadow required by s390 and x86 and support for
late initialization of execmem required by arm64.
The core implementation of execmem_alloc() takes care of suppressing
warnings when the initial allocation fails but there is a fallback range
defined.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Tested-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Several architectures override module_alloc() only to define address
range for code allocations different than VMALLOC address space.
Provide a generic implementation in execmem that uses the parameters for
address space ranges, required alignment and page protections provided
by architectures.
The architectures must fill execmem_info structure and implement
execmem_arch_setup() that returns a pointer to that structure. This way the
execmem initialization won't be called from every architecture, but rather
from a central place, namely a core_initcall() in execmem.
The execmem provides execmem_alloc() API that wraps __vmalloc_node_range()
with the parameters defined by the architectures. If an architecture does
not implement execmem_arch_setup(), execmem_alloc() will fall back to
module_alloc().
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
module_alloc() is used everywhere as a mean to allocate memory for code.
Beside being semantically wrong, this unnecessarily ties all subsystems
that need to allocate code, such as ftrace, kprobes and BPF to modules and
puts the burden of code allocation to the modules code.
Several architectures override module_alloc() because of various
constraints where the executable memory can be located and this causes
additional obstacles for improvements of code allocation.
Start splitting code allocation from modules by introducing execmem_alloc()
and execmem_free() APIs.
Initially, execmem_alloc() is a wrapper for module_alloc() and
execmem_free() is a replacement of module_memfree() to allow updating all
call sites to use the new APIs.
Since architectures define different restrictions on placement,
permissions, alignment and other parameters for memory that can be used by
different subsystems that allocate executable memory, execmem_alloc() takes
a type argument, that will be used to identify the calling subsystem and to
allow architectures define parameters for ranges suitable for that
subsystem.
No functional changes.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Move the logic related to the memory allocation and freeing into
module_memory_alloc() and module_memory_free().
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Define MODULES_VADDR and MODULES_END as VMALLOC_START and VMALLOC_END
for 32-bit and reduce module_alloc() to
__vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END, ...)
as with the new defines the allocations becomes identical for both 32
and 64 bits.
While on it, drop unused include of <linux/jump_label.h>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
nios2 uses kmalloc() to implement module_alloc() because CALL26/PCREL26
cannot reach all of vmalloc address space.
Define module space as 32MiB below the kernel base and switch nios2 to
use vmalloc for module allocations.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
and MODULE_END to MODULES_END to match other architectures that define
custom address space for modules.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit f6f37d9320a1 ("arm64: select KASAN_VMALLOC for SW/HW_TAGS
modes") KASAN_VMALLOC is always enabled when KASAN is on. This means
that allocations in module_alloc() will be tracked by KASAN protection
for vmalloc() and that kasan_alloc_module_shadow() will be always an
empty inline and there is no point in calling it.
Drop meaningless call to kasan_alloc_module_shadow() from
module_alloc().
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces. The goal is to remove its use completely [2].
namebuf is eventually cleaned of any trailing llvm suffixes using
strstr(). This hints that namebuf should be NUL-terminated.
static void cleanup_symbol_name(char *s)
{
char *res;
...
res = strstr(s, ".llvm.");
...
}
Due to this, use strscpy() over strncpy() as it guarantees
NUL-termination on the destination buffer. Drop the -1 from the length
calculation as it is no longer needed to ensure NUL-termination.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90 [2]
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
If UNUSED_KSYMS_WHITELIST is a file generated
before Kbuild runs, and the source tree is in
a read-only filesystem, the developer must put
the file somewhere and specify an absolute
path to UNUSED_KSYMS_WHITELIST. This worked,
but if IKCONFIG=y, an absolute path is embedded
into .config and eventually into vmlinux, causing
the build to be less reproducible when building
on a different machine.
This patch makes the handling of
UNUSED_KSYMS_WHITELIST to be similar to
MODULE_SIG_KEY.
First, check if UNUSED_KSYMS_WHITELIST is an
absolute path, just as before this patch. If so,
use the path as is.
If it is a relative path, use wildcard to check
the existence of the file below objtree first.
If it does not exist, fall back to the original
behavior of adding $(srctree)/ before the value.
After this patch, the developer can put the generated
file in objtree, then use a relative path against
objtree in .config, eradicating any absolute paths
that may be evaluated differently on different machines.
Signed-off-by: Yifan Hong <elsk@google.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Commit 99a741aa7a2d ("i2c: mux: gpio: remove support for class-based
device instantiation") removed the last call to i2c_mux_add_adapter()
with a non-null class argument. Therefore the class argument can be
removed.
Note: Class-based device instantiation is a legacy mechanism which
shouldn't be used in new code, so we can rule out that this argument
may be needed again in the future.
This driver was forgotten by the patch in the Fixes tag.
Fixes: fec1982d7072 ("i2c: mux: Remove class argument from i2c_mux_add_adapter()")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Commit 8788ca164eb4b ("ftrace: Remove the legacy _ftrace_direct API")
stopped setting the 'ftrace_direct_func_count' variable, but left
it around. Clean it up.
Link: https://lore.kernel.org/linux-trace-kernel/20240506233305.215735-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The bcm2835-unicam driver calls the clk_set_min_rate() function, which
is declared but not implemented on platforms that don't provide
COMMON_CLK. This causes linkage failures with some configurations.
Fix it by depending on COMMON_CLK. This only slightly restricts
compilation testing, but not usage of the driver as all platforms on
which the hardware can be found provide COMMON_CLK.
Fixes: 392cd78d495f ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405112243.2MLRT7li-lkp@intel.com/
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Commit 8788ca164eb4b ("ftrace: Remove the legacy _ftrace_direct API")
stopped using 'ftrace_direct_funcs' (and the associated
struct ftrace_direct_func). Remove them.
Build tested only (on x86-64 with FTRACE and DYNAMIC_FTRACE
enabled)
Link: https://lore.kernel.org/linux-trace-kernel/20240504132303.67538-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
forget drop the .export_symbol section from the final modules.
Fixes: ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
Signed-off-by: Wang Yao <wangyao@lemote.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
By now, more Loongson-2K2000 related drivers are supported, such as
clock controller and thermal controller. So we add these device nodes
to the Loongson-2K2000 dts file.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
By now, more Loongson-2K0500 related drivers are supported, such as
clock controller, thermal controller, and dma controller. So we add
these device nodes to the Loongson-2K0500 dts file.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Things like clock controllers or architectural interrupt controllers,
no one would disable them because otherwise they would have no usable
system. So we just "enabled" them by default.
Suggested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This commit switches to use the LoongArch's built-in rustc target
'loongarch64-unknown-none-softfloat'. The Rust samples have been tested.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With commit d3119bc985fb645 ("LoongArch: Fix callchain parse error with
kernel tracepoint events"), perf can parse kernel callchain, but not
complete and sometimes maybe error. The reason is LoongArch's unwinders
(guess, prologue and orc) don't really need fp (i.e., regs[22]), and
they use sp (i.e., regs[3]) as the frame address rather than the current
stack pointer.
Fix that by removing the assignment of regs[22], and instead assign the
__builtin_frame_address(0) to regs[3].
Without fix:
Children Self Command Shared Object Symbol
........ ........ ............. ................. ................
33.91% 33.91% swapper [kernel.vmlinux] [k] __schedule
|
|--33.04%--__schedule
|
--0.87%--__arch_cpu_idle
__schedule
With this fix:
Children Self Command Shared Object Symbol
........ ........ ............. ................. ................
31.16% 31.16% swapper [kernel.vmlinux] [k] __schedule
|
|--20.63%--smpboot_entry
| cpu_startup_entry
| schedule_idle
| __schedule
|
--10.53%--start_kernel
cpu_startup_entry
schedule_idle
__schedule
Fixes: d3119bc985fb645 ("LoongArch: Fix callchain parse error with kernel tracepoint events")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In the current code, SMP is selected in Kconfig for LoongArch, the users
can not unset it, this is reasonable for a multi-processor machine. But
as the help info of config SMP said, if you have a system with only one
CPU, say N. On a uni-processor machine, the kernel will run faster if you
say N here.
Loongson-2K0500 is a single-core CPU for applications like industrial
control, printing terminals, and BMC (Baseboard Management Controller),
there are many development boards, products and solutions on the market,
so it is better and necessary to give a chance to build with !CONFIG_SMP
for a uni-processor machine.
First of all, do not select SMP for config LOONGARCH in Kconfig to make
it possible to unset CONFIG_SMP. Then, do some changes to fix warnings
and errors if CONFIG_SMP is not set.
(1) Define get_ipi_irq() only if CONFIG_SMP is set to fix the warning:
arch/loongarch/kernel/irq.c:90:19: warning: 'get_ipi_irq' defined but not used [-Wunused-function]
(2) Add "#ifdef CONFIG_SMP" in asm/smp.h to fix the warning:
./arch/loongarch/include/asm/smp.h:49:9: warning: "raw_smp_processor_id" redefined
49 | #define raw_smp_processor_id raw_smp_processor_id
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/smp.h:198:9: note: this is the location of the previous definition
198 | #define raw_smp_processor_id() 0
(3) Define machine_shutdown() as empty under !CONFIG_SMP to fix the error:
arch/loongarch/kernel/machine_kexec.c: In function 'machine_shutdown':
arch/loongarch/kernel/machine_kexec.c:233:25: error: implicit declaration of function 'cpu_device_up'; did you mean 'put_device'? [-Wimplicit-function-declaration]
(4) Make config SCHED_SMT depends on SMP to fix many errors such as:
kernel/sched/core.c: In function 'sched_core_find':
kernel/sched/core.c:310:43: error: 'struct rq' has no member named 'cpu'
(5) Define cpu_logical_map(cpu) as 0 under !CONFIG_SMP in asm/smp.h,
then include asm/smp.h in asm/acpi.h (because acpi.h is included in
linux/irq.h indirectly) to fix many build errors under drivers/irqchip
such as:
drivers/irqchip/irq-loongson-eiointc.c: In function 'cpu_to_eio_node':
drivers/irqchip/irq-loongson-eiointc.c:59:16: error: implicit declaration of function 'cpu_logical_map' [-Wimplicit-function-declaration]
(6) Do not write per_cpu_offset(0) to PERCPU_BASE_KS when resume because
the per_cpu_offset(x) macro is defined as (__per_cpu_offset[x]) only
under CONFIG_SMP in include/asm-generic/percpu.h. Just save the value of
PERCPU_BASE_KS when suspend and restore it when resume to fix the error:
arch/loongarch/power/suspend.c: In function 'loongarch_common_resume':
arch/loongarch/power/suspend.c:47:21: error: implicit declaration of function 'per_cpu_offset' [-Wimplicit-function-declaration]
(7) Fix huge page handling under !CONFIG_SMP in tlbex.S.
When running the UnixBench tests with "-c 1" single-streamed pass, the
improvement of performance is about 9 percent with this patch.
By the way, it is helpful to debug and analysis the kernel issues of
multi-processor system under !CONFIG_SMP.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
THP_SWAP has been proven to improve the swap throughput significantly on
x86_64 system according to commit bd4c82c22c367e0 ("mm, THP, swap: delay
splitting THP after swapped out"), on ARM64 system according to commit
d0637c505f8a1d ("arm64: enable THP_SWAP for arm64") and on RISC-V system
according to commit 87f81e66e2e84c7 ("riscv: enable THP_SWAP for RV64").
Enable THP_SWAP for LoongArch, testing the micro-benchmark which is
introduced by commit d0637c505f8a1d ("arm64: enable THP_SWAP for arm64")
shows below numbers on the Loongson-3A5000 board:
swp out bandwidth w/o patch: 1815716 bytes/ms (mean of 10 tests)
swp out bandwidth w/ patch: 3410003 bytes/ms (mean of 10 tests)
Improved by 46.75%!
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
BPF JIT has better performance and more secure than BPF interpreter, so
enable it by default, as most other architectures done.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This allows compiling a full 128-bit product of two 64-bit integers as a
mul/mulh pair, instead of a nasty long sequence of 20+ instructions.
However, after selecting ARCH_SUPPORTS_INT128, when optimizing for size
the compiler generates calls to __ashlti3, __ashrti3, and __lshrti3 for
shifting __int128 values, causing a link failure:
loongarch64-unknown-linux-gnu-ld: kernel/sched/fair.o: in
function `mul_u64_u32_shr':
<PATH>/include/linux/math64.h:161:(.text+0x5e4): undefined
reference to `__lshrti3'
So provide the implementation of these functions if ARCH_SUPPORTS_INT128.
Closes: https://lore.kernel.org/loongarch/CAAhV-H5EZ=7OF7CSiYyZ8_+wWuenpo=K2WT8-6mAT4CvzUC_4g@mail.gmail.com/
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LA464 and LA664 can do 32-bit/64-bit integer multiplication with a
latency of 4 cycles and a throughput of 2 ops per cycle. It is
comparable to the mainstream x86 and arm64 cores, so we can select
ARCH_HAS_FAST_MULTIPLIER like them.
It speeds up __sw_hweight32() in lib/hweight.c for about 14% on LA464
and 11% on LA664, while __sw_hweight64() for about 30% on LA464 and 33%
on LA664.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The ramdisk memory utilization can only go up when data is written to
new pages. Implement discard to provide the possibility to reduce memory
usage for pages no longer in use. Aligned discards will free the
associated pages, if any, and determinisitically return zeroed data
until written again.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240429102308.147627-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull DSA and IAA accelerator mis-alignment fix from Arjan van de Ven:
"The DSA (memory copy/zero/etc) and IAA (compression) accelerators in
the Sapphire Rapids and Emerald Rapids SOCs turn out to have a bug
that has security implications.
Both of these accelerators work by the application submitting a 64
byte command to the device; this command contains an opcode as well as
the virtual address of the return value that the device will update on
completion... and a set of opcode specific values.
In a typical scenario a ring 3 application mmaps the device file and
uses the ENQCMD or MOVDIR64 instructions (which are variations of a 64
byte atomic write) on this mmap'd memory region to directly submit
commands to a device hardware.
The return value as specified in the command, is supposed to be 32 (or
64) bytes aligned in memory, and generally the hardware checks and
enforces this alignment.
However in testing it has been found that there are conditions
(controlled by the submitter) where this enforcement does not
happen... which makes it possible for the return value to span a page
boundary. And this is where it goes wrong - the accelerators will
perform the virtual to physical address lookup on the first of the two
pages, but end up continue writing to the next consecutive physical
(host) page rather than the consecutive virtual page. In addition, the
device will end up in a hung state on such unaligned write of the
return value.
This patch series has the proposed software side solution consisting
of three parts:
- Don't allow these two PCI devices to be assigned to VM guests (we
cannot trust a VM guest to behave correctly and not cause this
condition)
- Don't allow ring 3 applications to set up the mmap unless they have
CAP_SYS_RAWIO permissions. This makes it no longer possible for
non-root applications to directly submit commands to the
accelerator
- Add a write() method to the device so that an application can
submit its commands to the kernel driver, which performs the needed
sanity checks before submitting it to the hardware.
This switch from mmap to write is an incompatible interface change to
non-root userspace, but we have not found a way to avoid this. All
software we know of uses a small set of accessor libraries for these
accelerators, for which libqpl and libdml (on github) are the most
common. As part of the security release, updated versions of these
libraries will be released that transparently fall back to write().
Intel has assigned CVE-2024-21823 to this hardware issue"
* tag 'idxd-for-linus-may2024' of git bundle from Arjan:
dmaengine: idxd: add a write() method for applications to submit work
dmaengine: idxd: add a new security check to deal with a hardware erratum
VFIO: Add the SPR_DSA and SPR_IAX devices to the denylist
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 shadow stacks from Ingo Molnar:
"Enable shadow stacks for x32.
While we normally don't do such feature-enabling for 32-bit anymore,
this change is small, straightforward & tested on upstream glibc"
* tag 'x86-shstk-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/shstk: Enable shadow stacks for x32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
- Improve the DeviceTree (OF) NUMA enumeration code to address
kernel warnings & mis-mappings on DeviceTree platforms
- Migrate x86 platform drivers to the .remove_new callback API
- Misc cleanups & fixes
* tag 'x86-platform-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/olpc-xo1-sci: Convert to platform remove callback returning void
x86/platform/olpc-x01-pm: Convert to platform remove callback returning void
x86/platform/iris: Convert to platform remove callback returning void
x86/of: Change x86_dtb_parse_smp_config() to static
x86/of: Map NUMA node to CPUs as per DeviceTree
x86/of: Set the parse_smp_cfg for all the DeviceTree platforms by default
x86/hyperv/vtl: Correct x86_init.mpparse.parse_smp_cfg assignment
|
