summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-14Bluetooth: hci_bcm: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-14Bluetooth: btqcomsmd: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-14Bluetooth: Add support for MediaTek MT7922 deviceIan W MORRISON
This patch adds support for the MediaTek MT7922 Bluetooth device. The information in /sys/kernel/debug/usb/devices about the MT7922 is as follows: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3585 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Ian W MORRISON <ianwmorrison@live.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-14Bluetooth: btintel: Add support to download intermediate loaderKiran K
Some variants of Intel controllers like BlazarI supports downloading of Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its not possible to fix issue in Primary bootloader once flashed to ROM. This patch adds the support to download IML before downloading operational firmware image. dmesg logs: [13.399003] Bluetooth: Core ver 2.22 [13.399006] Bluetooth: Starting self testing [13.401194] Bluetooth: ECDH test passed in 2135 usecs [13.421175] Bluetooth: SMP test passed in 597 usecs [13.421184] Bluetooth: Finished self testing [13.422919] Bluetooth: HCI device and connection manager initialized [13.422923] Bluetooth: HCI socket layer initialized [13.422925] Bluetooth: L2CAP socket layer initialized [13.422930] Bluetooth: SCO socket layer initialized [13.458065] Bluetooth: hci0: Device revision is 0 [13.458071] Bluetooth: hci0: Secure boot is disabled [13.458072] Bluetooth: hci0: OTP lock is disabled [13.458072] Bluetooth: hci0: API lock is enabled [13.458073] Bluetooth: hci0: Debug lock is disabled [13.458073] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590 [13.458324] Bluetooth: hci0: DSM reset method type: 0x00 [13.460678] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291-iml.sfi [13.460684] Bluetooth: hci0: Boot Address: 0x30099000 [13.460685] Bluetooth: hci0: Firmware Version: 227-11.24 [13.562554] Bluetooth: hci0: Waiting for firmware download to complete [13.563023] Bluetooth: hci0: Firmware loaded in 99941 usecs [13.563057] Bluetooth: hci0: Waiting for device to boot [13.565029] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [13.565148] Bluetooth: hci0: Device booted in 2064 usecs [13.567065] Bluetooth: hci0: No device address configured [13.569010] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291.sfi [13.569061] Bluetooth: hci0: Boot Address: 0x10000800 [13.569062] Bluetooth: hci0: Firmware Version: 227-11.24 [13.788891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [13.788897] Bluetooth: BNEP filters: protocol multicast [13.788902] Bluetooth: BNEP socket layer initialized [15.435905] Bluetooth: hci0: Waiting for firmware download to complete [15.436016] Bluetooth: hci0: Firmware loaded in 1823233 usecs [15.436258] Bluetooth: hci0: Waiting for device to boot [15.471140] Bluetooth: hci0: Device booted in 34277 usecs [15.471201] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [15.471487] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0090-0291.ddc [15.474353] Bluetooth: hci0: Applying Intel DDC parameters completed [15.474486] Bluetooth: hci0: Found Intel DDC parameters: intel/bdaddress.cfg [15.475299] Bluetooth: hci0: Applying Intel DDC parameters completed [15.479381] Bluetooth: hci0: Firmware timestamp 2024.10 buildtype 3 build 58595 [15.479385] Bluetooth: hci0: Firmware SHA1: 0xb4f3cc46 [15.483243] Bluetooth: hci0: Fseq status: Success (0x00) [15.483246] Bluetooth: hci0: Fseq executed: 00.00.00.00 [15.483247] Bluetooth: hci0: Fseq BT Top: 00.00.00.00 [15.578712] Bluetooth: MGMT ver 1.22 [15.822682] Bluetooth: RFCOMM TTY layer initialized [15.822690] Bluetooth: RFCOMM socket layer initialized [15.822695] Bluetooth: RFCOMM ver 1.11 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-14Bluetooth: btintel: Define macros for image typesKiran K
Use macro for image type instead of using hard code number. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-14rapidio: remove choice for enumerationMasahiro Yamada
This is the last use of the tristate choice. This choice was introduced a decade ago by commit a11650e11093 ("rapidio: make enumeration/discovery configurable"). Since then, RAPIDIO_ENUM_BASIC has always been the sole member. There was no need to have this choice block. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-05-14kconfig: lxdialog: remove initialization with A_NORMALMasahiro Yamada
A_NORMAL is zero, so the attribute is set to the default A_NORMAL without explicit assignment. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-05-14kconfig: m/nconf: merge two item_add_str() callsMasahiro Yamada
Just trivial cleanups. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-05-14kconfig: m/nconf: remove dead code to display value of bool choiceMasahiro Yamada
Previously, optional bool choices met the following conditions simultaneously: - sym_is_choice(sym) - sym_is_changeable(sym) - type == S_BOOLEAN It no longer occurs since 6a1215888e23 ("kconfig: remove 'optional' property support"). Remove the dead code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-05-14kconfig: m/nconf: remove dead code to display children of choice membersMasahiro Yamada
This code previously displayed child symbols of the selected choice member. Since commit 7e3465f63a0a ("kconfig: do not reparent the menu inside a choice block"), choice members never have child symbols, therefore this is dead code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-05-14kconfig: gconf: show checkbox for choice correctlyMasahiro Yamada
Currently, bool choices have a checkbox, but tristate choices do not. It is opposite. Bool choices should not have a checkbox, as they are fixed to 'y' since commit 6a1215888e23 ("kconfig: remove 'optional' property support"). Tristate choices, however, should have a checkbox to allow users to toggle the value. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-05-14kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinalMasahiro Yamada
Instead of filtering out the GCOV and KCSAN flags, let's set GCOV_PROFILE and KCSAN_SANITIZE to 'n', as in other Makefiles. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
2024-05-14Makefile: remove redundant tool coverage variablesMasahiro Yamada
Now Kbuild provides reasonable defaults for objtool, sanitizers, and profilers. Remove redundant variables. Note: This commit changes the coverage for some objects: - include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV - include arch/sparc/vdso/vdso-image-*.o into UBSAN - include arch/sparc/vdso/vma.o into UBSAN - include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV - include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV - include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV - include arch/x86/entry/vdso/vma.o into GCOV, KCOV - include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV I believe these are positive effects because all of them are kernel space objects. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
2024-05-14kbuild: provide reasonable defaults for tool coverageMasahiro Yamada
The objtool, sanitizers (KASAN, UBSAN, etc.), and profilers (GCOV, etc.) are intended only for kernel space objects. For instance, the following are not kernel objects, and therefore should opt out of coverage: - vDSO - purgatory - bootloader (arch/*/boot/) However, to exclude these from coverage, you need to explicitly set OBJECT_FILES_NON_STNDARD=y, KASAN_SANITIZE=n, etc. Kbuild can achieve this without relying on such variables because objects not directly linked to vmlinux or modules are considered "non-standard objects". Detecting standard objects is straightforward: - objects added to obj-y or lib-y are linked to vmlinux - objects added to obj-m are linked to modules There are some exceptional Makefiles (e.g., arch/s390/boot/Makefile, arch/xtensa/boot/lib/Makefile) that use obj-y or lib-y for non-kernel space objects, but they can be fixed later if necessary. Going forward, objects that are not listed in obj-y, lib-y, or obj-m will opt out of objtool, sanitizers, and profilers by default. You can still override the Kbuild decision by explicitly specifying OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. but most of such Make variables can be removed. The next commit will clean up redundant variables. Note: This commit changes the coverage for some objects: - exclude .vmlinux.export.o from UBSAN, KCOV - exclude arch/csky/kernel/vdso/vgettimeofday.o from UBSAN - exclude arch/parisc/kernel/vdso32/vdso32.so from UBSAN - exclude arch/parisc/kernel/vdso64/vdso64.so from UBSAN - exclude arch/x86/um/vdso/um_vdso.o from UBSAN - exclude drivers/misc/lkdtm/rodata.o from UBSAN, KCOV - exclude init/version-timestamp.o from UBSAN, KCOV - exclude lib/test_fortify/*.o from all santizers and profilers I believe these are positive effects. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
2024-05-14nbd: Fix signal handlingBart Van Assche
Both nbd_send_cmd() and nbd_handle_cmd() return either a negative error number or a positive blk_status_t value. nbd_queue_rq() converts these return values into a blk_status_t value. There is a bug in the conversion code: if nbd_send_cmd() returns BLK_STS_RESOURCE, nbd_queue_rq() should return BLK_STS_RESOURCE instead of BLK_STS_OK. Fix this, move the conversion code into nbd_handle_cmd() and fix the remaining sparse warnings. This patch fixes the following sparse warnings: drivers/block/nbd.c:673:32: warning: incorrect type in return expression (different base types) drivers/block/nbd.c:673:32: expected int drivers/block/nbd.c:673:32: got restricted blk_status_t [usertype] drivers/block/nbd.c:714:48: warning: incorrect type in return expression (different base types) drivers/block/nbd.c:714:48: expected int drivers/block/nbd.c:714:48: got restricted blk_status_t [usertype] drivers/block/nbd.c:1120:21: warning: incorrect type in assignment (different base types) drivers/block/nbd.c:1120:21: expected int [assigned] ret drivers/block/nbd.c:1120:21: got restricted blk_status_t [usertype] drivers/block/nbd.c:1125:16: warning: incorrect type in return expression (different base types) drivers/block/nbd.c:1125:16: expected restricted blk_status_t drivers/block/nbd.c:1125:16: got int [assigned] ret Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Markus Pargmann <mpa@pengutronix.de> Fixes: fc17b6534eb8 ("blk-mq: switch ->queue_rq return value to blk_status_t") Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240510202313.25209-6-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-14nbd: Remove a local variable from nbd_send_cmd()Bart Van Assche
blk_rq_bytes() returns an unsigned int while 'size' has type unsigned long. This is confusing. Improve code readability by removing the local variable 'size'. Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240510202313.25209-5-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-14nbd: Improve the documentation of the locking assumptionsBart Van Assche
Document locking assumptions with lockdep_assert_held() instead of source code comments. The advantage of lockdep_assert_held() is that it is verified at runtime if lockdep is enabled in the kernel config. Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240510202313.25209-4-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-14nbd: Remove superfluous castsBart Van Assche
In Linux kernel code it is preferred not to use a cast when converting a void pointer to another pointer type. Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240510202313.25209-3-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-14nbd: Use NULL to represent a pointerBart Van Assche
This patch fixes the following sparse warnings: drivers/block/nbd.c: note: in included file (through include/trace/trace_events.h, include/trace/define_trace.h, include/trace/events/nbd.h): ./include/trace/events/nbd.h:61:1: warning: Using plain integer as NULL pointer drivers/block/nbd.c: note: in included file (through include/trace/perf.h, include/trace/define_trace.h, include/trace/events/nbd.h): ./include/trace/events/nbd.h:61:1: warning: Using plain integer as NULL pointer Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240510202313.25209-2-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-14net: micrel: Fix receiving the timestamp in the frame for lan8841Horatiu Vultur
The blamed commit started to use the ptp workqueue to get the second part of the timestamp. And when the port was set down, then this workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING is not enabled, then the ptp_clock is not initialized so then it would crash when it would try to access the delayed work. So then basically by setting up and then down the port, it would crash. The fix consists in checking if the ptp_clock is initialized and only then cancel the delayed work. Fixes: cc7554954848 ("net: micrel: Change to receive timestamp in the frame for lan8841") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-14Merge branch 'for-6.10/winwing' into for-linusJiri Kosina
- implement full support for WinWing Orion2 (Ivan Gorinov)
2024-05-14Merge branch 'for-6.10/uclogic' into for-linusJiri Kosina
2024-05-14Merge branch 'for-6.10/steam' into for-linusJiri Kosina
- support for Deck IMU in hid-steam (Max Maisel)
2024-05-14Merge branch 'for-6.10/sony' into for-linusJiri Kosina
2024-05-14Merge branch 'for-6.10/playstation' into for-linusJiri Kosina
- fixes for better support of 3rd party playstation DS4 controllers (Max Staudt)
2024-05-14Merge branch 'for-6.10/plarform-driver-remove-new' into for-linusJiri Kosina
- conversion of HID device drivers from platform_driver->remove() to platform_driver->remove_new() (Uwe Kleine-König)
2024-05-14Merge branch 'for-6.10/nintendo' into for-linusJiri Kosina
2024-05-14Merge branch 'for-6.10/kye' into for-linusJiri Kosina
2024-05-14Merge branch 'for-6.10/intel-ish' into for-linusJiri Kosina
- Implement loading firmware from host in intel-ish driver, needed to support Lunar Lake and later (Zhang Lixu)
2024-05-14Merge branch 'for-6.10/i2c-hid' into for-linusJiri Kosina
- PM fixes for STM and Weida Tech devices (Kenny Levinsen)
2024-05-14Merge branch 'for-6.10/hid-sysfs-emit' into for-linusJiri Kosina
- conversion from sprintf() to sysfs_emit() (Li Zhijian)
2024-05-14Merge branch 'for-6.10/hid-debug' into for-linusJiri Kosina
- support for missing mappings and codes from HUT 1.5 in hid-debug (Thomas Kuehne)
2024-05-14s390/pkey: Use kfree_sensitive() to fix Coccinelle warningsJules Irenge
Replace memzero_explicit() and kfree() with kfree_sensitive() to fix warnings reported by Coccinelle: WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1506) WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1643) WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1770) Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Link: https://lore.kernel.org/r/ZjqZkNi_JUJu73Rg@octinomon.home Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14Merge branch 'for-6.10/hid-bpf' into for-linusJiri Kosina
- updates to HID-BPF infrastructure, with some of the specific fixes (e.g. rdesc fixups) abstracted into separate BPF programs for consumption by libevdev/udev-hid-bpf (Benjamin Tissoires)
2024-05-14Merge branch 'for-6.10/asus' into for-linusJiri Kosina
- initial support for ROG Ally and ROG X13 devices (Luke D. Jones) - other small assorted cleanups of hid-asus driver (Luke D. Jones)
2024-05-14Merge branch 'for-6.10/amd-sfh' into for-linusJiri Kosina
- PM fix and assorted other code cleanups for amd-sfh (Basavaraj Natikar)
2024-05-14s390/fpu: Remove comment about TIF_FPUThomas Huth
It has been removed in commit 2c6b96762fbd ("s390/fpu: remove TIF_FPU"), so we should not mention TIF_FPU in the comment here anymore. Since the remaining parts of the comment just document the obvious fact that save_user_fpu_regs() saves the FPU state, simply remove the comment now completely. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20240503080648.81461-1-thuth@redhat.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390: Mark psw in __load_psw_mask() as __unitializedSven Schnelle
Without __unitialized, the following code is generated when INIT_STACK_ALL_ZERO is enabled: 86: d7 0f f0 a0 f0 a0 xc 160(16,%r15), 160(%r15) 8c: e3 40 f0 a0 00 24 stg %r4, 160(%r15) 92: c0 10 00 00 00 08 larl %r1, 0xa2 98: e3 10 f0 a8 00 24 stg %r1, 168(%r15) 9e: b2 b2 f0 a0 lpswe 160(%r15) The xc is not adding any security because psw is fully initialized with the following instructions. Add __unitialized to the psw definitiation to avoid the superfluous clearing of psw. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/vtime: Use get_cpu_timer()Sven Schnelle
Instead of implementing get_vtimer() use get_cpu_timer() which does the same. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/idle: Rewrite psw_idle() in CSven Schnelle
To ease maintenance and further enhancements, convert the psw_idle() function to C. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/stackstrace: Detect vdso stack framesHeiko Carstens
Clear the backchain of the extra stack frame added by the vdso user wrapper code. This allows the user stack walker to detect and skip the non-standard stack frame. Without this an incorrect instruction pointer would be added to stack traces, and stack frame walking would be continued with a more or less random back chain. Fixes: aa44433ac4ee ("s390: add USER_STACKTRACE support") Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/vdso: Introduce and use struct stack_frame_vdso_wrapperHeiko Carstens
Introduce and use struct stack_frame_vdso_wrapper within vdso user wrapper code. With this structure it is possible to automatically generate an asm-offset define which can be used to save and restore the return address of the calling function. Also use STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document that the code works with user space stack frames with the standard stack frame layout. Fixes: aa44433ac4ee ("s390: add USER_STACKTRACE support") Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/stacktrace: Improve detection of invalid instruction pointersHeiko Carstens
Add basic checks to identify invalid instruction pointers when walking stack frames: Instruction pointers must - have even addresses - be larger than mmap_min_addr - lower than the asce_limit of the process Alternatively it would also be possible to walk page tables similar to fast GUP and verify that the mapping of the corresponding page is executable, however that seems to be overkill. Fixes: aa44433ac4ee ("s390: add USER_STACKTRACE support") Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/stacktrace: Skip first user stack frameHeiko Carstens
When walking user stack frames the first stack frame (where the stack pointer points to) should be skipped: the return address of the current function is saved in the previous stack frame, not the current stack frame, which is allocated for to be called functions. Fixes: aa44433ac4ee ("s390: add USER_STACKTRACE support") Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/stacktrace: Merge perf_callchain_user() and arch_stack_walk_user()Heiko Carstens
The two functions perf_callchain_user() and arch_stack_walk_user() are nearly identical. Reduce code duplication and add a common helper which can be called by both functions. Fixes: aa44433ac4ee ("s390: add USER_STACKTRACE support") Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/vdso: Use standard stack frame layoutHeiko Carstens
By default user space is compiled with standard stack frame layout and not with the packed stack layout. The vdso code however inherited the -mpacked-stack compiler option from the kernel. Remove this option to make sure the vdso is compiled with standard stack frame layout. This makes sure that the stack frame backchain location for vdso generated stack frames is the same like for calling code (if compiled with default options). This allows to manually walk stack frames without DWARF information, like the kernel is doing it e.g. with arch_stack_walk_user(). Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/vdso: Create .build-id links for unstripped vdso filesJens Remus
Citing Andy Lutomirski from commit dda1e95cee38 ("x86/vdso: Create .build-id links for unstripped vdso files"): "With this change, doing 'make vdso_install' and telling gdb: set debug-file-directory /lib/modules/KVER/vdso will enable vdso debugging with symbols. This is useful for testing, but kernel RPM builds will probably want to manually delete these symlinks or otherwise do something sensible when they strip the vdso/*.so files." Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Signed-off-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/vdso: Generate unwind information for C modulesJens Remus
GDB fails to unwind vDSO functions with error message "PC not saved", for instance when stepping through gettimeofday(). Add -fasynchronous-unwind-tables to CFLAGS to generate .eh_frame DWARF unwind information for the vDSO C modules. Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Signed-off-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/pgtable: Add missing hardware bits for puds, pmdsClaudio Imbrenda
Add the table type and ACCF validity bits to _SEGMENT_ENTRY_BITS and _SEGMENT_ENTRY_HARDWARE_BITS{,_LARGE}. For completeness, introduce _REGION3_ENTRY_HARDWARE_BITS_LARGE and _REGION3_ENTRY_HARDWARE_BITS, containing the hardware bits used for large puds and normal puds. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20240429143409.49892-3-imbrenda@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-14s390/pgtable: Switch read and write softbits for pudsClaudio Imbrenda
There is no reason for the read and write softbits to be swapped in the puds compared to pmds. They are different only because the softbits for puds were introduced at the same time when the softbits for pmds were swapped. The current implementation is not wrong per se, since the macros are defined correctly; only the documentation does not reflect reality. With this patch, the read and write softbits for large pmd and large puds will have the same layout, and will match the existing documentation. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20240429143409.49892-2-imbrenda@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 09:30:38 +0000