| Age | Commit message (Collapse) | Author |
|---|
|
The shared frame buffer of the SJA1110 is larger than that of SJA1105,
which is natural due to the fact that there are more ports.
Introduce yet another property in struct sja1105_info which encodes the
maximum number of 128 byte blocks that can be used for frame buffers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The SJA1110 policer array is similar in layout with SJA1105, except it
contains one multicast policer per port at the end.
Detect the presence of multicast policers based on the maximum number of
supported L2 Policing Table entries, and make those policers have a
shared index equal to the port's default policer. Letting the user
configure these policers is not supported at the moment.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using sja1105_xfer_buf results in a higher overhead and is harder to
read.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due to the fact that the port count is different, some static config
tables have a different number of elements in SJA1105 compared to
SJA1110. Such an example is the L2 Policing table, which has 45 entries
in SJA1105 (one per port x traffic class, and one broadcast policer per
port) and 110 entries in SJA1110 (one per port x traffic class, one
broadcast and one multicast policer per port).
Similarly, the MAC Configuration Table, the L2 Forwarding table, all
have a different number of elements simply because the port count is
different, and although this can be accounted for by looking at
ds->ports, the policing table can't because of the presence of the extra
multicast policers.
The common denominator for the static config initializers for these
tables is that they must set up all the entries within that table.
So the simplest way to account for these differences in a uniform manner
is to look at struct sja1105_table_ops::max_entry_count. For the sake of
uniformity, this patch makes that change also for tables whose number of
elements did not change in SJA1110, like the xMII Mode Parameters, the
L2 Lookup Parameters, General Parameters, AVB Parameters (all of these
are singleton tables with a single entry).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are two distinct code paths which enter sja1105_clocking.c, one
through sja1105_clocking_setup() and the other through
sja1105_clocking_setup_port():
sja1105_static_config_reload sja1105_setup
| |
| +------------------+
| |
v v
sja1105_clocking_setup sja1105_adjust_port_config
| |
v |
sja1105_clocking_setup_port <------------------+
As opposed to SJA1105, the SJA1110 does not need any configuration of
the Clock Generation Unit in order for xMII ports to work. Just RGMII
internal delays need to be configured, and that is done inside
sja1105_clocking_setup_port for the RGMII ports.
So this patch introduces the concept of a "reserved address", which the
CGU configuration functions from sja1105_clocking.c must check before
proceeding to do anything. The SJA1110 will have reserved addresses for
the CGU PLLs for MII/RMII/RGMII.
Additionally, make sja1105_clocking_setup() a function pointer so it can
be overridden by the SJA1110. Even though nothing port-related needs to
be done in the CGU, there are some operations such as disabling the
watchdog clock which are unique to the SJA1110.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If @port is unused, then dsa_upstream_port(ds, port) returns @port,
which means we cannot assume the CPU port can be retrieved this way.
The sja1105 switches support a single CPU port, so just iterate over the
switch ports and stop at the first CPU port we see.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce a SJA1105_MAX_NUM_PORTS macro which at the moment is equal to
SJA1105_NUM_PORTS (5). With the introduction of SJA1110, these
structures will need to hold information for up to 11 ports.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not put unused ports in the forwarding domain, and do not allocate
FDB entries for dynamic address learning for them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sja1105 driver will gain support for the next-gen SJA1110 switch,
which is very similar except for the fact it has more than 5 ports.
So we need to replace the hardcoded SJA1105_NUM_PORTS in this driver
with ds->num_ports. This patch is as mechanical as possible (save for
the fact that ds->num_ports is not an integer constant expression).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Huazhong Tan says:
====================
net: hns3: add two promisc mode updates
This series includes two updates related to promisc mode for the HNS3
ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HCLGE_STATE_PROMISC_CHANGED
Currently, PF is using HCLGE_STATE_PROMISC_CHANGED to indicate
need synchronize the promisc mode for itself, and using flag
HCLGE_VPORT_STATE_PROMISC_CHANGE for its VF. To keep consistent,
remove flag HCLGE_STATE_PROMISC_CHANGED, and use flag
HCLGE_VPORT_STATE_PROMISC_CHANGE instead.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when host set VF untrusted, the driver will disable
the promisc mode of VF. It may be conflicted when the VF requests
the host to set promisc mode. So refactor it by changing promisc
mode for VF asynchronously. With this change, the promisc mode of
VF can be restored when the VF being trusted again.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
Fixes for SJA1105 DSA driver
This series contains some minor fixes in the sja1105 driver:
- improved error handling in the probe path
- rejecting an invalid phy-mode specified in the device tree
- register access fix for SJA1105P/Q/R/S for the virtual links through
the dynamic reconfiguration interface
- handling 2 bridge VLANs where the second is supposed to overwrite the
first
- making sure that the lack of a pvid results in the actual dropping of
untagged traffic
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When running this sequence of operations:
ip link add br0 type bridge vlan_filtering 1
ip link set swp4 master br0
bridge vlan add dev swp4 vid 1
We observe the traffic sent on swp4 is still untagged, even though the
bridge has overwritten the existing VLAN entry:
port vlan ids
swp4 1 PVID
br0 1 PVID Egress Untagged
This happens because we didn't consider that the 'bridge vlan add'
command just overwrites VLANs like it's nothing. We treat the 'vid 1
pvid untagged' and the 'vid 1' as two separate VLANs, and the first
still has precedence when calling sja1105_build_vlan_table. Obviously
there is a disagreement regarding semantics, and we end up doing
something unexpected from the PoV of the bridge.
Let's actually consider an "existing VLAN" to be one which is on the
same port, and has the same VLAN ID, as one we already have, and update
it if it has different flags than we do.
The first blamed commit is the one introducing the bug, the second one
is the latest on top of which the bugfix still applies.
Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Fixes: 5899ee367ab3 ("net: dsa: tag_8021q: add a context structure")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One thing became visible when writing the blamed commit, and that was
that STP and PTP frames injected by net/dsa/tag_sja1105.c using the
deferred xmit mechanism are always classified to the pvid of the CPU
port, regardless of whatever VLAN there might be in these packets.
So a decision needed to be taken regarding the mechanism through which
we should ensure that delivery of STP and PTP traffic is possible when
we are in a VLAN awareness mode that involves tag_8021q. This is because
tag_8021q is not concerned with managing the pvid of the CPU port, since
as far as tag_8021q is concerned, no traffic should be sent as untagged
from the CPU port. So we end up not actually having a pvid on the CPU
port if we only listen to tag_8021q, and unless we do something about it.
The decision taken at the time was to keep VLAN 1 in the list of
priv->dsa_8021q_vlans, and make it a pvid of the CPU port. This ensures
that STP and PTP frames can always be sent to the outside world.
However there is a problem. If we do the following while we are in
the best_effort_vlan_filtering=true mode:
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
bridge vlan del dev swp2 vid 1
Then untagged and pvid-tagged frames should be dropped. But we observe
that they aren't, and this is because of the precaution we took that VID
1 is always installed on all ports.
So clearly VLAN 1 is not good for this purpose. What about VLAN 0?
Well, VLAN 0 is managed by the 8021q module, and that module wants to
ensure that 802.1p tagged frames are always received by a port, and are
always transmitted as VLAN-tagged (with VLAN ID 0). Whereas we want our
STP and PTP frames to be untagged if the stack sent them as untagged -
we don't want the driver to just decide out of the blue that it adds
VID 0 to some packets.
So what to do?
Well, there is one other VLAN that is reserved, and that is 4095:
$ ip link add link swp2 name swp2.4095 type vlan id 4095
Error: 8021q: Invalid VLAN id.
$ bridge vlan add dev swp2 vid 4095
Error: bridge: Vlan id is invalid.
After we made this change, VLAN 1 is indeed forwarded and/or dropped
according to the bridge VLAN table, there are no further alterations
done by the sja1105 driver.
Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver continues probing when a port is configured for an
unsupported PHY interface type, instead it should stop.
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If any of sja1105_static_config_load(), sja1105_clocking_setup() or
sja1105_devlink_setup() fails, we can't just return in the middle of
sja1105_setup() or memory will leak. Add a cleanup path.
Fixes: 0a7bdbc23d8a ("net: dsa: sja1105: move devlink param code to sja1105_devlink.c")
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unlike other drivers which pretty much end their .probe() execution with
dsa_register_switch(), the sja1105 does some extra stuff. When that
fails with -ENOMEM, the driver is quick to return that, forgetting to
call dsa_unregister_switch(). Not critical, but a bug nonetheless.
Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Fixes: a68578c20a96 ("net: dsa: Make deferred_xmit private to sja1105")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At the beginning of the sja1105_dynamic_config.c file there is a diagram
of the dynamic config interface layout:
packed_buf
|
V
+-----------------------------------------+------------------+
| ENTRY BUFFER | COMMAND BUFFER |
+-----------------------------------------+------------------+
<----------------------- packed_size ------------------------>
So in order to pack/unpack the command bits into the buffer,
sja1105_vl_lookup_cmd_packing must first advance the buffer pointer by
the length of the entry. This is similar to what the other *cmd_packing
functions do.
This bug exists because the command packing function for P/Q/R/S was
copied from the E/T generation, and on E/T, the command was actually
embedded within the entry buffer itself.
Fixes: 94f94d4acfb2 ("net: dsa: sja1105: add static tables for virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the tiocmset and rfkill requests which erroneously used
usb_rcvctrlpipe().
Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Verify some fields of the USB descriptor to make sure the driver
could be used by the device.
Besides, remove the check of endpoint number in rtl8152_probe().
usb_find_common_endpoints() includes it.
BugLink: https://syzkaller.appspot.com/bug?id=912c9c373656996801b4de61f1e3cb326fe940aa
Reported-by: syzbot+95afd23673f5dd295c57@syzkaller.appspotmail.com
Fixes: c2198943e33b ("r8152: search the configuration of vendor mode")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In function st_nci_hci_network_init, the variable r is assigned then
goto exit label, which just return r, so we use return to replace it.
and exit label only used once at here, so we remove exit label.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If Qdisc_ops->init() is failed, Qdisc_ops->reset() would be called.
When dsmark_init(Qdisc_ops->init()) is failed, it possibly doesn't
initialize dsmark_qdisc_data->q. But dsmark_reset(Qdisc_ops->reset())
uses dsmark_qdisc_data->q pointer wihtout any null checking.
So, panic would occur.
Test commands:
sysctl net.core.default_qdisc=dsmark -w
ip link add dummy0 type dummy
ip link add vw0 link dummy0 type virt_wifi
ip link set vw0 up
Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 3 PID: 684 Comm: ip Not tainted 5.12.0+ #910
RIP: 0010:qdisc_reset+0x2b/0x680
Code: 1f 44 00 00 48 b8 00 00 00 00 00 fc ff df 41 57 41 56 41 55 41 54
55 48 89 fd 48 83 c7 18 53 48 89 fa 48 c1 ea 03 48 83 ec 20 <80> 3c 02
00 0f 85 09 06 00 00 4c 8b 65 18 0f 1f 44 00 00 65 8b 1d
RSP: 0018:ffff88800fda6bf8 EFLAGS: 00010282
RAX: dffffc0000000000 RBX: ffff8880050ed800 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff99e34100 RDI: 0000000000000018
RBP: 0000000000000000 R08: fffffbfff346b553 R09: fffffbfff346b553
R10: 0000000000000001 R11: fffffbfff346b552 R12: ffffffffc0824940
R13: ffff888109e83800 R14: 00000000ffffffff R15: ffffffffc08249e0
FS: 00007f5042287680(0000) GS:ffff888119800000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ae1f4dbd90 CR3: 0000000006760002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? rcu_read_lock_bh_held+0xa0/0xa0
dsmark_reset+0x3d/0xf0 [sch_dsmark]
qdisc_reset+0xa9/0x680
qdisc_destroy+0x84/0x370
qdisc_create_dflt+0x1fe/0x380
attach_one_default_qdisc.constprop.41+0xa4/0x180
dev_activate+0x4d5/0x8c0
? __dev_open+0x268/0x390
__dev_open+0x270/0x390
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- "cgroup_disable=" boot param was being applied too late confusing
some subsystems. Fix it by moving application to __setup() time.
- Comment spelling fixes. Included here to lower the chance of trivial
future merge conflicts.
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix spelling mistakes
cgroup: disable controllers at parse time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"One commit to fix spurious workqueue stall warnings across VM
suspensions"
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
wq: handle VM suspension in stall detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's some device specific fixes here but also an unusually large
number of fixes for the core, including both fixes for breakage
introduced on ACPI systems while fixing the long standing confusion
about the polarity of GPIO chip selects specified through DT, and
fixes for ordering issues on unregistration which have been exposed
through the wider usage of devm_."
* tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sc18is602: implement .max_{transfer,message}_size() for the controller
spi: sc18is602: don't consider the chip select byte in sc18is602_check_transfer
MAINTAINERS: Add Alain Volmat as STM32 SPI maintainer
dt-bindings: spi: spi-mux: rename flash node
spi: Don't have controller clean up spi device before driver unbind
spi: Assume GPIO CS active high in ACPI case
spi: sprd: Add missing MODULE_DEVICE_TABLE
spi: Switch to signed types for *_native_cs SPI controller fields
spi: take the SPI IO-mutex in the spi_set_cs_timing method
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
spi: spi-zynq-qspi: Fix stack violation bug
spi: spi-zynq-qspi: Fix kernel-doc warning
spi: altera: Make SPI_ALTERA_CORE invisible
spi: Fix spi device unregister flow
|
|
Fix some spelling mistakes in comments:
hierarhcy ==> hierarchy
automtically ==> automatically
overriden ==> overridden
In absense of .. or ==> In absence of .. and
assocaited ==> associated
taget ==> target
initate ==> initiate
succeded ==> succeeded
curremt ==> current
udpated ==> updated
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
There are multiple occurrances of the misspelling of requeued in
the drivers with symbol names and debug text. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210423134133.339751-1-colin.king@canonical.com
|
|
Issue identified with Coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/nfc/nfcmrvl follows this syntax, but the content
inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.
For e.g., running scripts/kernel-doc -none on drivers/nfc/nfcmrvl/spi.c
causes warning:
warning: expecting prototype for Marvell NFC(). Prototype was for SPI_WAIT_HANDSHAKE() instead
Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but
was not reset when it is disabled, which may cause traffic leaks:
ip link add br0 type bridge vlan_filtering 1
ip link add br1 type bridge vlan_filtering 1
ip link set swp0 master br0
ip link set swp1 master br1
ip link set br0 type bridge vlan_filtering 0
ip link set br1 type bridge vlan_filtering 0
# traffic in br0 and br1 will start leaking to each other
As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the
PCR_MATRIX write from mt7530_port_set_vlan_aware.
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use phy_ethtool_nway_reset() since the driver makes use of the PHY
library.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Florian Fainelli says:
====================
net: r6040: Non-functional changes
These two patches clean up the r6040 driver a little bit in preparation
for adding additional features such as dumping MAC counters and properly
dealing with DMA-API mapping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of the open coded constant 4.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is not a functional change, but we should be using a logical or to
assign the bits we will be writing to the MDIO read and write registers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Davide Caratti says:
====================
two fixes for the fq_pie scheduler
- patch 1/2 restores the possibility to use 65536 flows with fq_pie,
preserving the fix for an endless loop in the control plane
- patch 2/2 fixes an OOB access that can be observed in the traffic
path of fq_pie scheduler, when the classification selects a flow
beyond the allocated space.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev eth0 handle 0x1 root fq_pie flows 2
# tc qdisc add dev eth0 clsact
# tc filter add dev eth0 egress matchall action skbedit priority 0x10002
# ping 192.0.2.2 -I eth0 -c2 -w1 -q
produces the following splat:
BUG: KASAN: slab-out-of-bounds in fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie]
Read of size 4 at addr ffff888171306924 by task ping/942
CPU: 3 PID: 942 Comm: ping Not tainted 5.12.0+ #441
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x92/0xc1
print_address_description.constprop.7+0x1a/0x150
kasan_report.cold.13+0x7f/0x111
fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie]
__dev_queue_xmit+0x1034/0x2b10
ip_finish_output2+0xc62/0x2120
__ip_finish_output+0x553/0xea0
ip_output+0x1ca/0x4d0
ip_send_skb+0x37/0xa0
raw_sendmsg+0x1c4b/0x2d00
sock_sendmsg+0xdb/0x110
__sys_sendto+0x1d7/0x2b0
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fe69735c3eb
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89
RSP: 002b:00007fff06d7fb38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055e961413700 RCX: 00007fe69735c3eb
RDX: 0000000000000040 RSI: 000055e961413700 RDI: 0000000000000003
RBP: 0000000000000040 R08: 000055e961410500 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff06d81260
R13: 00007fff06d7fb40 R14: 00007fff06d7fc30 R15: 000055e96140f0a0
Allocated by task 917:
kasan_save_stack+0x19/0x40
__kasan_kmalloc+0x7f/0xa0
__kmalloc_node+0x139/0x280
fq_pie_init+0x555/0x8e8 [sch_fq_pie]
qdisc_create+0x407/0x11b0
tc_modify_qdisc+0x3c2/0x17e0
rtnetlink_rcv_msg+0x346/0x8e0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888171306800
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 36 bytes to the right of
256-byte region [ffff888171306800, ffff888171306900)
The buggy address belongs to the page:
page:00000000bcfb624e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x171306
head:00000000bcfb624e order:1 compound_mapcount:0
flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0010200 dead000000000100 dead000000000122 ffff888100042b40
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888171306800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888171306880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
>ffff888171306900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff888171306980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888171306a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fix fq_pie traffic path to avoid selecting 'q->flows + q->flows_cnt' as a
valid flow: it's an address beyond the allocated memory.
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
CC: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the patch that fixed an endless loop in_fq_pie_init() was not considering
that 65535 is a valid class id. The correct bugfix for this infinite loop
is to change 'idx' to become an u32, like Colin proposed in the past [1].
Fix this as follows:
- restore 65536 as maximum possible values of 'flows_cnt'
- use u32 'idx' when iterating on 'q->flows'
- fix the TDC selftest
This reverts commit bb2f930d6dd708469a587dc9ed1efe1ef969c0bf.
[1] https://lore.kernel.org/netdev/20210407163808.499027-1-colin.king@canonical.com/
CC: Colin Ian King <colin.king@canonical.com>
CC: stable@vger.kernel.org
Fixes: bb2f930d6dd7 ("net/sched: fix infinite loop in sch_fq_pie")
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variables will be free on path err_phy_connect, it should
return error code, or it will cause double free when calling
ftgmac100_remove().
Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode")
Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
registers
If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.
We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.
Changed in v2:
- Use netif_running instead of its own flag
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MT7628/88 SoC(s) have other (limited) packet counter registers than
currently supported in the mtk_eth_soc driver. This patch adds support
for reading these registers, so that the packet statistics are correctly
updated.
Additionally the defines for the non-MT7628 variant packet counter
registers are added and used in this patch instead of using hard coded
values.
Signed-off-by: Stefan Roese <sr@denx.de>
Fixes: 296c9120752b ("net: ethernet: mediatek: Add MT7628/88 SoC support")
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Reto Schneider <code@reto-schneider.ch>
Cc: Reto Schneider <reto.schneider@husqvarnagroup.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Vinicius Costa Gomes as maintainer for these qdiscs.
These qdiscs are all TSN (Time Sensitive Networking) related.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two perf fixes:
- Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
this can cause malfunction when TOS is not supported
- Allocate the LBR XSAVE buffers along with the DS buffers upfront
because allocating them when adding an event can deadlock"
* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two locking fixes:
- Invoke the lockdep tracepoints in the correct place so the ordering
is correct again
- Don't leave the mutex WAITER bit stale when the last waiter is
dropping out early due to a signal as that forces all subsequent
lock operations needlessly into the slowpath until it's cleaned up
again"
* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
locking/lockdep: Correct calling tracepoints
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails
- Make the APPLE AIC chip driver depend on APPLE
- Remove redundant error output on devm_ioremap_resource() failure"
* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Remove redundant error printing
irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix how SEV handles MMIO accesses by forwarding potential page faults
instead of killing the machine and by using the accessors with the
exact functionality needed when accessing memory.
- Fix a confusion with Clang LTO compiler switches passed to the it
- Handle the case gracefully when VMGEXIT has been executed in
userspace
* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use __put_user()/__get_user() for data accesses
x86/sev-es: Forward page-faults which happen during emulation
x86/sev-es: Don't return NULL from sev_es_get_ghcb()
x86/build: Fix location of '-plugin-opt=' flags
x86/sev-es: Invalidate the GHCB after completing VMGEXIT
x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
|
