summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-23team: no need to do team_notify_peers or team_mcast_rejoin when disabling portHangbin Liu
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by: Liang Li <liali@redhat.com> Fixes: fc423ff00df3a ("team: add peer notification") Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: mvneta: remove redundant check for eee->tx_lpi_timer < 0YueHaibing
fixes the smatch warning: drivers/net/ethernet/marvell/mvneta.c:4252 mvneta_ethtool_set_eee() warn: unsigned 'eee->tx_lpi_timer' is never less than zero. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23bpf: Add BPF_MAP_TYPE_QUEUE and BPF_MAP_TYPE_STACK to bpftool-mapDavid Calavera
I noticed that these two new BPF Maps are not defined in bpftool. This patch defines those two maps and adds their names to the bpftool-map documentation. Signed-off-by: David Calavera <david.calavera@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-23samples: bpf: fix: error handling regarding kprobe_eventsDaniel T. Lee
Currently, kprobe_events failure won't be handled properly. Due to calling system() indirectly to write to kprobe_events, it can't be identified whether an error is derived from kprobe or system. // buf = "echo '%c:%s %s' >> /s/k/d/t/kprobe_events" err = system(buf); if (err < 0) { printf("failed to create kprobe .."); return -1; } For example, running ./tracex7 sample in ext4 partition, "echo p:open_ctree open_ctree >> /s/k/d/t/kprobe_events" gets 256 error code system() failure. => The error comes from kprobe, but it's not handled correctly. According to man of system(3), it's return value just passes the termination status of the child shell rather than treating the error as -1. (don't care success) Which means, currently it's not working as desired. (According to the upper code snippet) ex) running ./tracex7 with ext4 env. # Current Output sh: echo: I/O error failed to open event open_ctree # Desired Output failed to create kprobe 'open_ctree' error 'No such file or directory' The problem is, error can't be verified whether from child ps or system. But using write() directly can verify the command failure, and it will treat all error as -1. So I suggest using write() directly to 'kprobe_events' rather than calling system(). Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-23libbpf: make bpf_object__open default to UNSPECNikita V. Shirokov
currently by default libbpf's bpf_object__open requires bpf's program to specify version in a code because of two things: 1) default prog type is set to KPROBE 2) KPROBE requires (in kernel/bpf/syscall.c) version to be specified in this patch i'm changing default prog type to UNSPEC and also changing requirments for version's section to be present in object file. now it would reflect what we have today in kernel (only KPROBE prog type requires for version to be explicitly set). v1 -> v2: - RFC tag has been dropped Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-23bpf: fix check of allowed specifiers in bpf_trace_printkMartynas Pumputis
A format string consisting of "%p" or "%s" followed by an invalid specifier (e.g. "%p%\n" or "%s%") could pass the check which would make format_decode (lib/vsprintf.c) to warn. Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com Signed-off-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-23virtio-net: fail XDP set if guest csum is negotiatedJason Wang
We don't support partial csumed packet since its metadata will be lost or incorrect during XDP processing. So fail the XDP set if guest_csum feature is negotiated. Fixes: f600b6905015 ("virtio_net: Add XDP support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: disable guest csum during XDP setJason Wang
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we can receive partial csumed packets with metadata kept in the vnet_hdr. This may have several side effects: - It could be overridden by header adjustment, thus is might be not correct after XDP processing. - There's no way to pass such metadata information through XDP_REDIRECT to another driver. - XDP does not support checksum offload right now. So simply disable guest csum if possible in this the case of XDP. Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-11-21 This series contains updates to all of the Intel LAN drivers and documentation. Shannon Nelson updates the ixgbe kernel documentation to include IPsec hardware offload. Joe Perches cleans up whitespace issues in the igb driver. Jesse update the netdev kernel documentation for NETIF_F_GSO_UDP_L4 to align with the actual code. Also aligned all the NAPI driver code for all of the Intel drivers to implement the recommendations of Eric Dumazet to check the return code of the napi_complete_done() to determine whether or not to enable interrupts or exit poll. Paul E. McKenney replaces synchronize_sched() with synchronize_rcu() for ixgbe. Sasha implements suggestions made by Joe Perches to remove obsolete code and to use the dev_err() method. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net-gro: use ffs() to speedup napi_gro_flush()Eric Dumazet
We very often have few flows/chains to look at, and we might increase GRO_HASH_BUCKETS to 32 or 64 in the future. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23Merge tag 'ceph-for-4.20-rc4' of https://github.com/ceph/ceph-clientLinus Torvalds
Pullk ceph fix from Ilya Dryomov: "A messenger fix, marked for stable" * tag 'ceph-for-4.20-rc4' of https://github.com/ceph/ceph-client: libceph: fall back to sendmsg for slab pages
2018-11-23Merge tag 'for-linus-20181123' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a single fix for this week, fixing an issue with nvme-fc" * tag 'for-linus-20181123' of git://git.kernel.dk/linux-block: nvme-fc: resolve io failures during connect
2018-11-23net/sched: act_police: add missing spinlock initializationDavide Caratti
commit f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") introduces a new spinlock, but forgets its initialization. Ensure that tcf_police_init() initializes 'tcfp_lock' every time a 'police' action is newly created, to avoid the following lockdep splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. <...> Call Trace: dump_stack+0x85/0xcb register_lock_class+0x581/0x590 __lock_acquire+0xd4/0x1330 ? tcf_police_init+0x2fa/0x650 [act_police] ? lock_acquire+0x9e/0x1a0 lock_acquire+0x9e/0x1a0 ? tcf_police_init+0x2fa/0x650 [act_police] ? tcf_police_init+0x55a/0x650 [act_police] _raw_spin_lock_bh+0x34/0x40 ? tcf_police_init+0x2fa/0x650 [act_police] tcf_police_init+0x2fa/0x650 [act_police] tcf_action_init_1+0x384/0x4c0 tcf_action_init+0xf6/0x160 tcf_action_add+0x73/0x170 tc_ctl_action+0x122/0x160 rtnetlink_rcv_msg+0x2a4/0x490 ? netlink_deliver_tap+0x99/0x400 ? validate_linkmsg+0x370/0x370 netlink_rcv_skb+0x4d/0x130 netlink_unicast+0x196/0x230 netlink_sendmsg+0x2e5/0x3e0 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x280/0x2f0 ? _raw_spin_unlock+0x24/0x30 ? handle_pte_fault+0xafe/0xf30 ? find_held_lock+0x2d/0x90 ? syscall_trace_enter+0x1df/0x360 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1841c7cf10 Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 RSP: 002b:00007ffcf9df4d68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f1841c7cf10 RDX: 0000000000000000 RSI: 00007ffcf9df4dc0 RDI: 0000000000000003 RBP: 000000005bf56105 R08: 0000000000000002 R09: 00007ffcf9df8edc R10: 00007ffcf9df47e0 R11: 0000000000000246 R12: 0000000000671be0 R13: 00007ffcf9df4e84 R14: 0000000000000008 R15: 0000000000000000 Fixes: f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: don't keep lonely packets forever in the gro hashPaolo Abeni
Eric noted that with UDP GRO and NAPI timeout, we could keep a single UDP packet inside the GRO hash forever, if the related NAPI instance calls napi_gro_complete() at an higher frequency than the NAPI timeout. Willem noted that even TCP packets could be trapped there, till the next retransmission. This patch tries to address the issue, flushing the old packets - those with a NAPI_GRO_CB age before the current jiffy - before scheduling the NAPI timeout. The rationale is that such a timeout should be well below a jiffy and we are not flushing packets eligible for sane GRO. v1 -> v2: - clarified the commit message and comment RFC -> v1: - added 'Fixes tags', cleaned-up the wording. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 3b47d30396ba ("net: gro: add a per device gro flush timer") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net/ipv6: re-do dad when interface has IFF_NOARP flag changeHangbin Liu
When we add a new IPv6 address, we should also join corresponding solicited-node multicast address, unless the interface has IFF_NOARP flag, as function addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do not do dad and add the mcast address. So we will drop corresponding neighbour discovery message that came from other nodes. A typical example is after creating a ipvlan with mode l3, setting up an ipv6 address and changing the mode to l2. Then we will not be able to ping this address as the interface doesn't join related solicited-node mcast address. Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add corresponding mcast group and check if there is a duplicate address on the network. Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23Merge branch 'dpaa-coalesce'David S. Miller
Madalin Bucur says: ==================== dpaa_eth: add ethtool coalesce control Add control of the DPAA portal interrupt coalescing settings from ethtool. changes from v2: read ithresh from HW, set previous values on failure changes from v1: added range checking for the QMan APIs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23dpaa_eth: add ethtool coalesce controlMadalin Bucur
Allow ethtool control of the DPAA QMan portal interrupt coalescing settings. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23soc/qman: add return value to interrupt coalesce changing APIsMadalin Bucur
Check that the values received by the portal interrupt coalesce change APIs are in range. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23soc: fsl: qbman: read ithresh from HWMadalin Bucur
Read the DQRR interrupt threshold directly from the hardware. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23Merge tag 'iommu-fixes-v4.20-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Two fixes for the Intel VT-d driver to fix a NULL-ptr dereference and an unbalance in an allocate/free path (allocated with memremap, freed with iounmap) - Fix for a crash in the Renesas IOMMU driver - Fix for the Advanced Virtual Interrupt Controler (AVIC) code in the AMD IOMMU driver * tag 'iommu-fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Use memunmap to free memremap amd/iommu: Fix Guest Virtual APIC Log Tail Address Register iommu/ipmmu-vmsa: Fix crash on early domain free iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()
2018-11-23Merge branch 'ravb-Duplex-handling-update-V3'David S. Miller
Magnus Damm says: ==================== ravb: Duplex handling update V3 [PATCH v3 01/02] ravb: Do not announce HDX as supported [PATCH v3 02/02] ravb: Clean up duplex handling This series is V3 of duplex handling improvements for the Ethernet-AVB driver. Previous versions of this series have been posted to linux-renesas-soc as RFC so V3 is the first actual version to make it to netdev. Based on the latest data sheet for R-Car Gen3 [1] and R-Car Gen2 [2] the following information is part of the EthernetAVB-IF overview page: Transfer speed: Supports transfer at 100 and 1000 Mbps Mode: Full-duplex mode It seems that the driver implementation is not matching the information provided in the friendly data sheet, and on top of this during run-time when changing PHY configuration of the link partner the Ethernet-AVB PHY seems to want to announce unsupported modes. [1] R-Car Series, 3rd Generation Rev.1.00 (Apr 2018) [2] R-Car Series, 2nd Generation Rev.2.00 (Feb 2016) Changes since V2: - Updated patch 1/2 to make use of phy_remove_link_mode() - Added Reviewed-by from Sergei - thanks! Changes since V1: - Updated patches to reflect input from Sergei and Geert - thanks! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23ravb: Clean up duplex handlingMagnus Damm
Since only full-duplex operation is supported by the hardware, remove duplex handling code and keep the register setting of ECMR.DM fixed at 1. This updates the driver implementation to follow the data sheet text "This bit should always be set to 1." Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23ravb: Do not announce HDX as supportedMagnus Damm
According to the data sheet the Ethernet-AVB hardware in R-Car Gen3 and R-Car Gen2 SoCs do not support half duplex operation. So update the driver to mark 100Mbit and 1Gbps HDX as unsupported. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23cxgb4: use new fw interface to get the VIN and smt indexSantosh Rastapur
If the fw supports returning VIN/VIVLD in FW_VI_CMD save it in port_info structure else retrieve these from viid and save them in port_info structure. Do the same for smt_idx from FW_VI_MAC_CMD Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: bcmgenet: remove HFB_CTRL accessDoug Berger
Commit c5a54bbcecec ("net: bcmgenet: abort suspend on error") mistakenly introduced register accesses that should not occur in bcmgenet_wol_power_up_cfg(). Fixes: c5a54bbcecec ("net: bcmgenet: abort suspend on error") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23packet: copy user buffers before orphan or cloneWillem de Bruijn
tpacket_snd sends packets with user pages linked into skb frags. It notifies that pages can be reused when the skb is released by setting skb->destructor to tpacket_destruct_skb. This can cause data corruption if the skb is orphaned (e.g., on transmit through veth) or cloned (e.g., on mirror to another psock). Create a kernel-private copy of data in these cases, same as tun/tap zerocopy transmission. Reuse that infrastructure: mark the skb as SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx). Unlike other zerocopy packets, do not set shinfo destructor_arg to struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify when the original skb is released and a timestamp is recorded. Do not change this timestamp behavior. The ubuf_info->callback is not needed anyway, as no zerocopy notification is expected. Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The resulting value is not a valid ubuf_info pointer, nor a valid tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this. The fix relies on features introduced in commit 52267790ef52 ("sock: add MSG_ZEROCOPY"), so can be backported as is only to 4.14. Tested with from `./in_netns.sh ./txring_overwrite` from http://github.com/wdebruij/kerneltools/tests Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23Merge tag 'acpi-4.20-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent the ACPI core from registering a platform device for the SMB0001 HID to avoid IRQ allocation issues (Hans de Goede)" * tag 'acpi-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / platform: Add SMB0001 HID to forbidden_id_list
2018-11-23Merge tag 'pm-4.20-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two issues in the Operating Performance Points (OPP) framework, one cpufreq driver issue, one problem related to the tasks freezer and a few build-related issues in the cpupower utility. Specifics: - Fix tasks freezer deadlock in de_thread() that occurs if one of its sub-threads has been frozen already (Chanho Min). - Avoid registering a platform device by the ti-cpufreq driver on platforms that cannot use it (Dave Gerlach). - Fix a mistake in the ti-opp-supply operating performance points (OPP) driver that caused an incorrect reference voltage to be used and make it adjust the minimum voltage dynamically to avoid hangs or crashes in some cases (Keerthy). - Fix issues related to compiler flags in the cpupower utility and correct a linking problem in it by renaming a file with a duplicate name (Jiri Olsa, Konstantin Khlebnikov)" * tag 'pm-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: exec: make de_thread() freezable cpufreq: ti-cpufreq: Only register platform_device when supported opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call opp: ti-opp-supply: Dynamically update u_volt_min tools cpupower: Override CFLAGS assignments tools cpupower debug: Allow to use outside build flags tools/power/cpupower: fix compilation with STATIC=true
2018-11-23arm64: cpufeature: Fix mismerge of CONFIG_ARM64_SSBD blockWill Deacon
When merging support for SSBD and the CRC32 instructions, the conflict resolution for the new capability entries in arm64_features[] inadvertedly predicated the availability of the CRC32 instructions on CONFIG_ARM64_SSBD, despite the functionality being entirely unrelated. Move the #ifdef CONFIG_ARM64_SSBD down so that it only covers the SSBD capability. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-23Merge tag 'gpio-v4.20-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Minor stuff except the IDA leak which was kind of important to fix. Also new maintainers, yay. - Do not lose an IDA on the gpiochip register errorpath. - Fix the PXA non-pincontrol GPIO-using platforms. - Fix the direction on the mockup GPIO driver. - Add some MAINTAINERS stuff: Bartosz stepped up as GPIO co-maintainer, and Andy established an Intel git tree" * tag 'gpio-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: MAINTAINERS: Do maintain Intel GPIO drivers via separate tree gpio: mockup: fix indicated direction gpio: pxa: fix legacy non pinctrl aware builds again gpio: don't free unallocated ida on gpiochip_add_data_with_key() error path MAINTAINERS: add myself as co-maintainer of gpiolib
2018-11-23Merge tag 'mmc-v4.20-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci-pci: Fixup card detect lookup - sdhci-pci: Workaround GLK firmware bug for tuning" * tag 'mmc-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci: Workaround GLK firmware failing to restore the tuning value mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL
2018-11-23Merge tag 'drm-fixes-2018-11-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular drm fixes: amdgpu: - Vega20 fixes - firmware loading fix - panel display fix - override fix i915: - Sandybridge lockup fix - fastboot DSI panel fix - GPU hang on Broxton - GPU reloc fixes on pineview/bearlake ast: - screen blurring fix - cursor appearance fix udmabuf: - mmap fix vc4: - NULL deref fix - async cursor update fix All seems pretty normal at this stage" * tag 'drm-fixes-2018-11-23' of git://anongit.freedesktop.org/drm/drm: drm/ast: fixed cursor may disappear sometimes drm/ast: change resolution may cause screen blurred drm/i915: Add rotation readout for plane initial config drm/i915: Force a LUT update in intel_initial_commit() drm/fb-helper: Blacklist writeback when adding connectors to fbdev drm/i915: Write GPU relocs harder with gen3 drm/amdgpu: Enable HDP memory light sleep drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture drm/amd/pp: handle negative values when reading OD drm/amdgpu: Add missing firmware entry for HAINAN drm/amd/powerplay: disable Vega20 DS related features drm/amdgpu: Fix oops when pp_funcs->switch_power_profile is unset drm/i915: Disable LP3 watermarks on all SNB machines drm/ast: Remove existing framebuffers before loading driver udmabuf: set read/write flag when exporting drm/amd/display: Support amdgpu "max bpc" connector property (v2) drm/amdgpu: Add amdgpu "max bpc" connector property (v2) drm/vc4: Set ->legacy_cursor_update to false when doing non-async updates drm/vc4: Fix NULL pointer dereference in the async update path
2018-11-23arm64: sysreg: fix sparse warningsSergey Matyukevich
Specify correct type for the constants to avoid the following sparse complaints: ./arch/arm64/include/asm/sysreg.h:471:42: warning: constant 0xffffffffffffffff is so big it is unsigned long ./arch/arm64/include/asm/sysreg.h:512:42: warning: constant 0xffffffffffffffff is so big it is unsigned long Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-23btrfs: relocation: set trans to be NULL after ending transactionPan Bian
The function relocate_block_group calls btrfs_end_transaction to release trans when update_backref_cache returns 1, and then continues the loop body. If btrfs_block_rsv_refill fails this time, it will jump out the loop and the freed trans will be accessed. This may result in a use-after-free bug. The patch assigns NULL to trans after trans is released so that it will not be accessed. Fixes: 0647bf564f1 ("Btrfs: improve forever loop when doing balance relocation") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-23Merge branches 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki
* pm-cpufreq: cpufreq: ti-cpufreq: Only register platform_device when supported * pm-sleep: exec: make de_thread() freezable
2018-11-23Merge branches 'pm-opp' and 'pm-tools'Rafael J. Wysocki
* pm-opp: opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call opp: ti-opp-supply: Dynamically update u_volt_min * pm-tools: tools cpupower: Override CFLAGS assignments tools cpupower debug: Allow to use outside build flags tools/power/cpupower: fix compilation with STATIC=true
2018-11-23Merge tag 'drm-intel-fixes-2018-11-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix for fastboot DSI panel boot time flicker regression, also fixes Bugzilla #108225 - Fix Bugzilla #101269 to avoid GPU hangs on Sandybridge machines - Avoid GPU hang on error capture on Broxton with Vt-d enabled - Avoid missing GPU relocations on Pineview and Bearlake (Gen3) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181122120555.GA18282@jlahtine-desk.ger.corp.intel.com
2018-11-22bpf: add skb->tstamp r/w access from tc clsact and cg skb progsVlad Dumitrescu
This could be used to rate limit egress traffic in concert with a qdisc which supports Earliest Departure Time, such as FQ. Write access from cg skb progs only with CAP_SYS_ADMIN, since the value will be used by downstream qdiscs. It might make sense to relax this. Changes v1 -> v2: - allow access from cg skb, write only with CAP_SYS_ADMIN Signed-off-by: Vlad Dumitrescu <vladum@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-22bpf: fix integer overflow in queue_stack_mapAlexei Starovoitov
Fix the following issues: - allow queue_stack_map for root only - fix u32 max_entries overflow - disallow value_size == 0 Fixes: f1a2e44a3aec ("bpf: add queue and stack maps") Reported-by: Wei Wu <ww9210@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Mauricio Vasquez B <mauricio.vasquez@polito.it> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-22Merge branch 'ibmvnic-Fix-queue-and-buffer-accounting-errors'David S. Miller
Thomas Falcon says: ==================== ibmvnic: Fix queue and buffer accounting errors This series includes two small fixes. The first resolves a typo bug in the code to clean up unused RX buffers during device queue removal. The second ensures that device queue memory is updated to reflect new supported queue ring sizes after migration to other backing hardware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22ibmvnic: Update driver queues after change in ring size supportThomas Falcon
During device reset, queue memory is not being updated to accommodate changes in ring buffer sizes supported by backing hardware. Track any differences in ring buffer sizes following the reset and update queue memory when possible. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22ibmvnic: Fix RX queue buffer cleanupThomas Falcon
The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22net: thunderx: set xdp_prog to NULL if bpf_prog_add failsLorenzo Bianconi
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine reports the error code instead of NULL in case of failure and xdp_prog pointer value is used in the driver to verify if XDP is currently enabled. Moreover report the error code to userspace if nicvf_xdp_setup fails Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22{net, IB}/mlx4: Initialize CQ buffers in the driver when possibleDaniel Jurgens
Perform CQ initialization in the driver when the capability is supported by the FW. When passing the CQ to HW indicate that the CQ buffer has been pre-initialized. Doing so decreases CQ creation time. Testing on P8 showed a single 2048 entry CQ creation time was reduced from ~395us to ~170us, which is 2.3x faster. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22net/dim: Update DIM start sample after each DIM iterationTal Gilboa
On every iteration of net_dim, the algorithm may choose to check for the system state by comparing current data sample with previous data sample. After each of these comparison, regardless of the action taken, the sample used as baseline is needed to be updated. This patch fixes a bug that causes DIM to take wrong decisions, due to never updating the baseline sample for comparison between iterations. This way, DIM always compares current sample with zeros. Although this is a functional fix, it also improves and stabilizes performance as the algorithm works properly now. Performance: Tested single UDP TX stream with pktgen: samples/pktgen/pktgen_sample03_burst_single_flow.sh -i p4p2 -d 1.1.1.1 -m 24:8a:07:88:26:8b -f 3 -b 128 ConnectX-5 100GbE packet rate improved from 15-19Mpps to 19-20Mpps. Also, toggling between profiles is less frequent with the fix. Fixes: 8115b750dbcb ("net/dim: use struct net_dim_sample as arg to net_dim") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22selftests: explicitly require kernel features needed by udpgro testsPaolo Abeni
commit 3327a9c46352f1 ("selftests: add functionals test for UDP GRO") make use of ipv6 NAT, but such a feature is not currently implied by selftests. Since the 'ip[6]tables' commands may actually create nft rules, depending on the specific user-space version, let's pull both NF and NFT nat modules plus the needed deps. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 3327a9c46352f1 ("selftests: add functionals test for UDP GRO") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22flexfiles: use per-mirror specified stateid for IOTigran Mkrtchyan
rfc8435 says: For tight coupling, ffds_stateid provides the stateid to be used by the client to access the file. However current implementation replaces per-mirror provided stateid with by open or lock stateid. Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and nfs4_ff_layout_prepare_ds. Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-22NFSv4.2 copy do not allocate memory under the lockOlga Kornievskaia
Bruce pointed out that we shouldn't allocate memory while holding a lock in the nfs4_callback_offload() and handle_async_copy() that deal with a racing CB_OFFLOAD and reply to COPY case. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-22Btrfs: fix race between enabling quotas and subvolume creationFilipe Manana
We have a race between enabling quotas end subvolume creation that cause subvolume creation to fail with -EINVAL, and the following diagram shows how it happens: CPU 0 CPU 1 btrfs_ioctl() btrfs_ioctl_quota_ctl() btrfs_quota_enable() mutex_lock(fs_info->qgroup_ioctl_lock) btrfs_ioctl() create_subvol() btrfs_qgroup_inherit() -> save fs_info->quota_root into quota_root -> stores a NULL value -> tries to lock the mutex qgroup_ioctl_lock -> blocks waiting for the task at CPU0 -> sets BTRFS_FS_QUOTA_ENABLED in fs_info -> sets quota_root in fs_info->quota_root (non-NULL value) mutex_unlock(fs_info->qgroup_ioctl_lock) -> checks quota enabled flag is set -> returns -EINVAL because fs_info->quota_root was NULL before it acquired the mutex qgroup_ioctl_lock -> ioctl returns -EINVAL Returning -EINVAL to user space will be confusing if all the arguments passed to the subvolume creation ioctl were valid. Fix it by grabbing the value from fs_info->quota_root after acquiring the mutex. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-22Merge tag 'sound-4.20-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The only significant change is for OSS PCM emulation to convert with kvcalloc() to address both performance and security issues. It's a pretty straightforward change, which should be safe. The rest are, as usual, device-specific small fixes for HD-audio" * tag 'sound-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/ca0132 - fix AE-5 pincfg ALSA: hda/ca0132 - Add new ZxR quirk ALSA: hda/ca0132 - Call pci_iounmap() instead of iounmap() ALSA: hda/realtek - Add quirk entry for HP Pavilion 15 ALSA: oss: Use kvzalloc() for local buffer allocations
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 01:27:42 +0000