summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-07net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag changeAdham Faris
rq->hw_mtu is used in function en_rx.c/mlx5e_skb_from_cqe_mpwrq_linear() to catch oversized packets. If FCS is concatenated to the end of the packet then the check should be updated accordingly. Rx rings initialization (mlx5e_init_rxq_rq()) invoked for every new set of channels, as part of mlx5e_safe_switch_params(), unknowingly if it runs with default configuration or not. Current rq->hw_mtu initialization assumes default configuration and ignores params->scatter_fcs_en flag state. Fix this, by accounting for params->scatter_fcs_en flag state during rq->hw_mtu initialization. In addition, updating rq->hw_mtu value during ingress traffic might lead to packets drop and oversize_pkts_sw_drop counter increase with no good reason. Hence we remove this optimization and switch the set of channels with a new one, to make sure we don't get false positives on the oversize_pkts_sw_drop counter. Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Adham Faris <afaris@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07Merge tag 'devicetree-fixes-for-6.2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix handling of multiple OF framebuffer devices - Fix booting on Socionext Synquacer with bad 'dma-ranges' entries - Add DT binding .yamllint to .gitignore * tag 'devicetree-fixes-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: interrupt-controller: arm,gic-v3: Fix typo in description of msi-controller property dt-bindings: Fix .gitignore of/address: Return an error when no valid dma-ranges are found of: Make OF framebuffer device names unique
2023-02-07Merge tag 'trace-v6.2-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fix from Steven Rostedt: "Fix regression in poll() and select() With the fix that made poll() and select() block if read would block caused a slight regression in rasdaemon, as it needed that kind of behavior. Add a way to make that behavior come back by writing zero into the 'buffer_percentage', which means to never block on read" * tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw
2023-02-07can: j1939: do not wait 250 ms if the same addr was already claimedDevid Antonio Filoni
The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states: d) No CF shall begin, or resume, transmission on the network until 250 ms after it has successfully claimed an address except when responding to a request for address-claimed. But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim prioritization" show that the CF begins the transmission after 250 ms from the first AC (address-claimed) message even if it sends another AC message during that time window to resolve the address contention with another CF. As stated in "4.4.2.3 - Address-claimed message": In order to successfully claim an address, the CF sending an address claimed message shall not receive a contending claim from another CF for at least 250 ms. As stated in "4.4.3.2 - NAME management (NM) message": 1) A commanding CF can d) request that a CF with a specified NAME transmit the address- claimed message with its current NAME. 2) A target CF shall d) send an address-claimed message in response to a request for a matching NAME Taking the above arguments into account, the 250 ms wait is requested only during network initialization. Do not restart the timer on AC message if both the NAME and the address match and so if the address has already been claimed (timer has expired) or the AC message has been sent to resolve the contention with another CF (timer is still running). Signed-off-by: Devid Antonio Filoni <devid.filoni@egluetechnologies.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20221125170418.34575-1-devid.filoni@egluetechnologies.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-07devlink: change port event netdev notifier from per-net to globalJiri Pirko
Currently only the network namespace of devlink instance is monitored for port events. If netdev is moved to a different namespace and then unregistered, NETDEV_PRE_UNINIT is missed which leads to trigger following WARN_ON in devl_port_unregister(). WARN_ON(devlink_port->type != DEVLINK_PORT_TYPE_NOTSET); Fix this by changing the netdev notifier from per-net to global so no event is missed. Fixes: 02a68a47eade ("net: devlink: track netdev with devlink_port assigned") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230206094151.2557264-1-jiri@resnulli.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-07selftests: ocelot: tc_flower_chains: make test_vlan_ingress_modify() more ↵Vladimir Oltean
comprehensive We have two IS1 filters of the OCELOT_VCAP_KEY_ANY key type (the one with "action vlan pop" and the one with "action vlan modify") and one of the OCELOT_VCAP_KEY_IPV4 key type (the one with "action skbedit priority"). But we have no IS1 filter with the OCELOT_VCAP_KEY_ETYPE key type, and there was an uncaught breakage there. To increase test coverage, convert one of the OCELOT_VCAP_KEY_ANY filters to OCELOT_VCAP_KEY_ETYPE, by making the filter also match on the MAC SA of the traffic sent by mausezahn, $h1_mac. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230205192409.1796428-2-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-07net: mscc: ocelot: fix VCAP filters not matching on MAC with "protocol 802.1Q"Vladimir Oltean
Alternative short title: don't instruct the hardware to match on EtherType with "protocol 802.1Q" flower filters. It doesn't work for the reasons detailed below. With a command such as the following: tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \ protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \ action vlan modify id 300 \ action goto chain $(IS2 0 0) the created filter is set by ocelot_flower_parse_key() to be of type OCELOT_VCAP_KEY_ETYPE, and etype is set to {value=0x8100, mask=0xffff}. This gets propagated all the way to is1_entry_set() which commits it to hardware (the VCAP_IS1_HK_ETYPE field of the key). Compare this to the case where src_mac isn't specified - the key type is OCELOT_VCAP_KEY_ANY, and is1_entry_set() doesn't populate VCAP_IS1_HK_ETYPE. The problem is that for VLAN-tagged frames, the hardware interprets the ETYPE field as holding the encapsulated VLAN protocol. So the above filter will only match those packets which have an encapsulated protocol of 0x8100, rather than all packets with VLAN ID 200 and the given src_mac. The reason why this is allowed to occur is because, although we have a block of code in ocelot_flower_parse_key() which sets "match_protocol" to false when VLAN keys are present, that code executes too late. There is another block of code, which executes for Ethernet addresses, and has a "goto finished_key_parsing" and skips the VLAN header parsing. By skipping it, "match_protocol" remains with the value it was initialized with, i.e. "true", and "proto" is set to f->common.protocol, or 0x8100. The concept of ignoring some keys rather than erroring out when they are present but can't be offloaded is dubious in itself, but is present since the initial commit fe3490e6107e ("net: mscc: ocelot: Hardware ofload for tc flower filter"), and it's outside of the scope of this patch to change that. The problem was introduced when the driver started to interpret the flower filter's protocol, and populate the VCAP filter's ETYPE field based on it. To fix this, it is sufficient to move the code that parses the VLAN keys earlier than the "goto finished_key_parsing" instruction. This will ensure that if we have a flower filter with both VLAN and Ethernet address keys, it won't match on ETYPE 0x8100, because the VLAN key parsing sets "match_protocol = false". Fixes: 86b956de119c ("net: mscc: ocelot: support matching on EtherType") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230205192409.1796428-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-07net: dsa: mt7530: don't change PVC_EG_TAG when CPU port becomes VLAN-awareVladimir Oltean
Frank reports that in a mt7530 setup where some ports are standalone and some are in a VLAN-aware bridge, 8021q uppers of the standalone ports lose their VLAN tag on xmit, as seen by the link partner. This seems to occur because once the other ports join the VLAN-aware bridge, mt7530_port_vlan_filtering() also calls mt7530_port_set_vlan_aware(ds, cpu_dp->index), and this affects the way that the switch processes the traffic of the standalone port. Relevant is the PVC_EG_TAG bit. The MT7530 documentation says about it: EG_TAG: Incoming Port Egress Tag VLAN Attribution 0: disabled (system default) 1: consistent (keep the original ingress tag attribute) My interpretation is that this setting applies on the ingress port, and "disabled" is basically the normal behavior, where the egress tag format of the packet (tagged or untagged) is decided by the VLAN table (MT7530_VLAN_EGRESS_UNTAG or MT7530_VLAN_EGRESS_TAG). But there is also an option of overriding the system default behavior, and for the egress tagging format of packets to be decided not by the VLAN table, but simply by copying the ingress tag format (if ingress was tagged, egress is tagged; if ingress was untagged, egress is untagged; aka "consistent). This is useful in 2 scenarios: - VLAN-unaware bridge ports will always encounter a miss in the VLAN table. They should forward a packet as-is, though. So we use "consistent" there. See commit e045124e9399 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode"). - Traffic injected from the CPU port. The operating system is in god mode; if it wants a packet to exit as VLAN-tagged, it sends it as VLAN-tagged. Otherwise it sends it as VLAN-untagged*. *This is true only if we don't consider the bridge TX forwarding offload feature, which mt7530 doesn't support. So for now, make the CPU port always stay in "consistent" mode to allow software VLANs to be forwarded to their egress ports with the VLAN tag intact, and not stripped. Link: https://lore.kernel.org/netdev/trinity-e6294d28-636c-4c40-bb8b-b523521b00be-1674233135062@3c-app-gmx-bs36/ Fixes: e045124e9399 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode") Reported-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230205140713.1609281-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-06cifs: Fix use-after-free in rdata->read_into_pages()ZhaoLong Wang
When the network status is unstable, use-after-free may occur when read data from the server. BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0 Call Trace: <TASK> dump_stack_lvl+0x38/0x4c print_report+0x16f/0x4a6 kasan_report+0xb7/0x130 readpages_fill_pages+0x14c/0x7e0 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 </TASK> Allocated by task 2535: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 __kasan_kmalloc+0x82/0x90 cifs_readdata_direct_alloc+0x2c/0x110 cifs_readdata_alloc+0x2d/0x60 cifs_readahead+0x393/0xfe0 read_pages+0x12f/0x470 page_cache_ra_unbounded+0x1b1/0x240 filemap_get_pages+0x1c8/0x9a0 filemap_read+0x1c0/0x540 cifs_strict_readv+0x21b/0x240 vfs_read+0x395/0x4b0 ksys_read+0xb8/0x150 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 79: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x50 __kasan_slab_free+0x10e/0x1a0 __kmem_cache_free+0x7a/0x1a0 cifs_readdata_release+0x49/0x60 process_one_work+0x46c/0x760 worker_thread+0x2a4/0x6f0 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 Last potentially related work creation: kasan_save_stack+0x22/0x50 __kasan_record_aux_stack+0x95/0xb0 insert_work+0x2b/0x130 __queue_work+0x1fe/0x660 queue_work_on+0x4b/0x60 smb2_readv_callback+0x396/0x800 cifs_abort_connection+0x474/0x6a0 cifs_reconnect+0x5cb/0xa50 cifs_readv_from_socket.cold+0x22/0x6c cifs_read_page_from_socket+0xc1/0x100 readpages_fill_pages.cold+0x2f/0x46 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 The following function calls will cause UAF of the rdata pointer. readpages_fill_pages cifs_read_page_from_socket cifs_readv_from_socket cifs_reconnect __cifs_reconnect cifs_abort_connection mid->callback() --> smb2_readv_callback queue_work(&rdata->work) # if the worker completes first, # the rdata is freed cifs_readv_complete kref_put cifs_readdata_release kfree(rdata) return rdata->... # UAF in readpages_fill_pages() Similarly, this problem also occurs in the uncache_fill_pages(). Fix this by adjusts the order of condition judgment in the return statement. Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-02-06ice: switch: fix potential memleak in ice_add_adv_recipe()Zhang Changzhong
When ice_add_special_words() fails, the 'rm' is not released, which will lead to a memory leak. Fix this up by going to 'err_unroll' label. Compile tested only. Fixes: 8b032a55c1bd ("ice: low level support for tunnels") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2023-02-06ice: Fix off by one in ice_tc_forward_to_queue()Dan Carpenter
The > comparison should be >= to prevent reading one element beyond the end of the array. The "vsi->num_rxq" is not strictly speaking the number of elements in the vsi->rxq_map[] array. The array has "vsi->alloc_rxq" elements and "vsi->num_rxq" is less than or equal to the number of elements in the array. The array is allocated in ice_vsi_alloc_arrays(). It's still an off by one but it might not access outside the end of the array. Fixes: 143b86f346c7 ("ice: Enable RX queue selection using skbedit action") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2023-02-06ice: Fix disabling Rx VLAN filtering with port VLAN enabledBrett Creeley
If the user turns on the vf-true-promiscuous-support flag, then Rx VLAN filtering will be disabled if the VF requests to enable promiscuous mode. When the VF is in a port VLAN, this is the incorrect behavior because it will allow the VF to receive traffic outside of its port VLAN domain. Fortunately this only resulted in the VF(s) receiving broadcast traffic outside of the VLAN domain because all of the VLAN promiscuous rules are based on the port VLAN ID. Fix this by setting the .disable_rx_filtering VLAN op to a no-op when a port VLAN is enabled on the VF. Also, make sure to make this fix for both Single VLAN Mode and Double VLAN Mode enabled devices. Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-06ice: fix out-of-bounds KASAN warning in virtchnlMichal Swiatkowski
KASAN reported: [ 9793.708867] BUG: KASAN: global-out-of-bounds in ice_get_link_speed+0x16/0x30 [ice] [ 9793.709205] Read of size 4 at addr ffffffffc1271b1c by task kworker/6:1/402 [ 9793.709222] CPU: 6 PID: 402 Comm: kworker/6:1 Kdump: loaded Tainted: G B OE 6.1.0+ #3 [ 9793.709235] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [ 9793.709245] Workqueue: ice ice_service_task [ice] [ 9793.709575] Call Trace: [ 9793.709582] <TASK> [ 9793.709588] dump_stack_lvl+0x44/0x5c [ 9793.709613] print_report+0x17f/0x47b [ 9793.709632] ? __cpuidle_text_end+0x5/0x5 [ 9793.709653] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.709986] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.710317] kasan_report+0xb7/0x140 [ 9793.710335] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.710673] ice_get_link_speed+0x16/0x30 [ice] [ 9793.711006] ice_vc_notify_vf_link_state+0x14c/0x160 [ice] [ 9793.711351] ? ice_vc_repr_cfg_promiscuous_mode+0x120/0x120 [ice] [ 9793.711698] ice_vc_process_vf_msg+0x7a7/0xc00 [ice] [ 9793.712074] __ice_clean_ctrlq+0x98f/0xd20 [ice] [ 9793.712534] ? ice_bridge_setlink+0x410/0x410 [ice] [ 9793.712979] ? __request_module+0x320/0x520 [ 9793.713014] ? ice_process_vflr_event+0x27/0x130 [ice] [ 9793.713489] ice_service_task+0x11cf/0x1950 [ice] [ 9793.713948] ? io_schedule_timeout+0xb0/0xb0 [ 9793.713972] process_one_work+0x3d0/0x6a0 [ 9793.714003] worker_thread+0x8a/0x610 [ 9793.714031] ? process_one_work+0x6a0/0x6a0 [ 9793.714049] kthread+0x164/0x1a0 [ 9793.714071] ? kthread_complete_and_exit+0x20/0x20 [ 9793.714100] ret_from_fork+0x1f/0x30 [ 9793.714137] </TASK> [ 9793.714151] The buggy address belongs to the variable: [ 9793.714158] ice_aq_to_link_speed+0x3c/0xffffffffffff3520 [ice] [ 9793.714632] Memory state around the buggy address: [ 9793.714642] ffffffffc1271a00: f9 f9 f9 f9 00 00 05 f9 f9 f9 f9 f9 00 00 02 f9 [ 9793.714656] ffffffffc1271a80: f9 f9 f9 f9 00 00 04 f9 f9 f9 f9 f9 00 00 00 00 [ 9793.714670] >ffffffffc1271b00: 00 00 00 04 f9 f9 f9 f9 04 f9 f9 f9 f9 f9 f9 f9 [ 9793.714680] ^ [ 9793.714690] ffffffffc1271b80: 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 00 00 00 00 [ 9793.714704] ffffffffc1271c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 The ICE_AQ_LINK_SPEED_UNKNOWN define is BIT(15). The value is bigger than both legacy and normal link speed tables. Add one element (0 - unknown) to both tables. There is no need to explicitly set table size, leave it empty. Fixes: 1d0e28a9be1f ("ice: Remove and replace ice speed defines with ethtool.h versions") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2023-02-06ice: Do not use WQ_MEM_RECLAIM flag for workqueueAnirudh Venkataramanan
When both ice and the irdma driver are loaded, a warning in check_flush_dependency is being triggered. This is due to ice driver workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one is not. According to kernel documentation, this flag should be set if the workqueue will be involved in the kernel's memory reclamation flow. Since it is not, there is no need for the ice driver's WQ to have this flag set so remove it. Example trace: [ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0 [ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel _rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1 0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_ core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ +0.000161] [last unloaded: bonding] [ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1 [ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ +0.000003] Workqueue: ice ice_service_task [ice] [ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0 [ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08 9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06 [ +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282 [ +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000 [ +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80 [ +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112 [ +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000 [ +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400 [ +0.000004] FS: 0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0 [ +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000002] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000002] <TASK> [ +0.000003] __flush_workqueue+0x203/0x840 [ +0.000006] ? mutex_unlock+0x84/0xd0 [ +0.000008] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? __pfx___flush_workqueue+0x10/0x10 [ +0.000006] ? mutex_lock+0xa3/0xf0 [ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core] [ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core] [ +0.000094] ib_unregister_device+0x25/0x30 [ib_core] [ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma] [ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma] [ +0.000059] ? up_write+0x5c/0x90 [ +0.000005] irdma_remove+0x36/0x90 [irdma] [ +0.000062] auxiliary_bus_remove+0x32/0x50 [ +0.000007] device_release_driver_internal+0xfa/0x1c0 [ +0.000005] bus_remove_device+0x18a/0x260 [ +0.000007] device_del+0x2e5/0x650 [ +0.000005] ? __pfx_device_del+0x10/0x10 [ +0.000003] ? mutex_unlock+0x84/0xd0 [ +0.000004] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? _raw_spin_unlock+0x18/0x40 [ +0.000005] ice_unplug_aux_dev+0x52/0x70 [ice] [ +0.000160] ice_service_task+0x1309/0x14f0 [ice] [ +0.000134] ? __pfx___schedule+0x10/0x10 [ +0.000006] process_one_work+0x3b1/0x6c0 [ +0.000008] worker_thread+0x69/0x670 [ +0.000005] ? __kthread_parkme+0xec/0x110 [ +0.000007] ? __pfx_worker_thread+0x10/0x10 [ +0.000005] kthread+0x17f/0x1b0 [ +0.000005] ? __pfx_kthread+0x10/0x10 [ +0.000004] ret_from_fork+0x29/0x50 [ +0.000009] </TASK> Fixes: 940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2023-02-06Merge tag 'cgroup-for-6.2-rc7-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "During the v6.2 cycle, there were a series of changes to task cpu affinity handling which fixed cpuset inadvertently clobbering user-configured affinity masks. Unfortunately, they broke the affinity handling on hybrid heterogeneous CPUs which have cores that can execute both 64 and 32bit along with cores that can only execute 32bit code. This contains two fix patches for the above issue. While reverting the changes that caused the regression is definitely an option, the origial patches do improve how cpuset behave signficantly in some cases and the fixes seem fairly safe, so I think it'd be better to try to fix them first" * tag 'cgroup-for-6.2-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: Call set_cpus_allowed_ptr() with appropriate mask for task cgroup/cpuset: Don't filter offline CPUs in cpuset_cpus_allowed() for top cpuset tasks
2023-02-06Merge tag 'for-6.2-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - explicitly initialize zlib work memory to fix a KCSAN warning - limit number of send clones by maximum memory allocated - limit device size extent in case it device shrink races with chunk allocation - raid56 fixes: - fix copy&paste error in RAID6 stripe recovery - make error bitmap update atomic * tag 'for-6.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: raid56: make error_bitmap update atomic btrfs: send: limit number of clones and allocated memory size btrfs: zlib: zero-initialize zlib workspace btrfs: limit device extents to the device size btrfs: raid56: fix stripes if vertical errors are found
2023-02-06cpuset: Call set_cpus_allowed_ptr() with appropriate mask for taskWill Deacon
set_cpus_allowed_ptr() will fail with -EINVAL if the requested affinity mask is not a subset of the task_cpu_possible_mask() for the task being updated. Consequently, on a heterogeneous system with cpusets spanning the different CPU types, updates to the cgroup hierarchy can silently fail to update task affinities when the effective affinity mask for the cpuset is expanded. For example, consider an arm64 system with 4 CPUs, where CPUs 2-3 are the only cores capable of executing 32-bit tasks. Attaching a 32-bit task to a cpuset containing CPUs 0-2 will correctly affine the task to CPU 2. Extending the cpuset to CPUs 0-3, however, will fail to extend the affinity mask of the 32-bit task because update_tasks_cpumask() will pass the full 0-3 mask to set_cpus_allowed_ptr(). Extend update_tasks_cpumask() to take a temporary 'cpumask' paramater and use it to mask the 'effective_cpus' mask with the possible mask for each task being updated. Fixes: 431c69fac05b ("cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()") Signed-off-by: Will Deacon <will@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2023-02-06cgroup/cpuset: Don't filter offline CPUs in cpuset_cpus_allowed() for top ↵Waiman Long
cpuset tasks Since commit 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask"), relax_compatible_cpus_allowed_ptr() is calling __sched_setaffinity() unconditionally. This helps to expose a bug in the current cpuset hotplug code where the cpumasks of the tasks in the top cpuset are not updated at all when some CPUs become online or offline. It is likely caused by the fact that some of the tasks in the top cpuset, like percpu kthreads, cannot have their cpu affinity changed. One way to reproduce this as suggested by Peter is: - boot machine - offline all CPUs except one - taskset -p ffffffff $$ - online all CPUs Fix this by allowing cpuset_cpus_allowed() to return a wider mask that includes offline CPUs for those tasks that are in the top cpuset. For tasks not in the top cpuset, the old rule applies and only online CPUs will be returned in the mask since hotplug events will update their cpumasks accordingly. Fixes: 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask") Reported-by: Will Deacon <will@kernel.org> Originally-from: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Will Deacon <will@kernel.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2023-02-06HID: Ignore battery for ELAN touchscreen 29DF on HPLuka Guzenko
The touchscreen reports a battery status of 0% and jumps to 1% when a stylus is used. The device ID was added and the battery ignore quirk was enabled for it. Signed-off-by: Luka Guzenko <l.guzenko@web.de> Link: https://lore.kernel.org/r/20230120223741.3007-1-l.guzenko@web.de Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-02-06HID: amd_sfh: if no sensors are enabled, clean upMario Limonciello
It was reported that commit b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command") had caused increased resume time on HP Envy x360. Before this commit 3 sensors were reported, but they were not actually functional. After this commit the sensors are no longer reported, but also the resume time increased. To avoid this problem explicitly look for the number of disabled sensors. If all the sensors are disabled, clean everything up. Fixes: b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115 Reported-by: Xaver Hugl <xaver.hugl@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://lore.kernel.org/r/20230203220850.13924-1-mario.limonciello@amd.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-02-06net: USB: Fix wrong-direction WARNING in plusb.cAlan Stern
The syzbot fuzzer detected a bug in the plusb network driver: A zero-length control-OUT transfer was treated as a read instead of a write. In modern kernels this error provokes a WARNING: usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0 WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 1 PID: 4645 Comm: dhcpcd Not tainted 6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 ... Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068 pl_vendor_req drivers/net/usb/plusb.c:60 [inline] pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline] pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889 __dev_open+0x297/0x4d0 net/core/dev.c:1417 __dev_change_flags+0x587/0x750 net/core/dev.c:8530 dev_change_flags+0x97/0x170 net/core/dev.c:8602 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979 sock_do_ioctl+0xcc/0x230 net/socket.c:1169 sock_ioctl+0x1f8/0x680 net/socket.c:1286 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and remove the USB_DIR_IN flag. Reported-and-tested-by: syzbot+2a0e7abd24f1eb90ce25@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 090ffa9d0e90 ("[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables") CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/00000000000052099f05f3b3e298@google.com/ Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-06HID: logitech: Disable hi-res scrolling on USBBastien Nocera
On some Logitech mice, such as the G903, and possibly the G403, the HID events are generated on a different interface to the HID++ one. If we enable hi-res through the HID++ interface, the HID interface wouldn't know anything about it, and handle the events as if they were regular scroll events, making the mouse unusable. Disable hi-res scrolling on those devices until we implement scroll events through HID++. Signed-off-by: Bastien Nocera <hadess@hadess.net> Tested-by: Tobias Klausmann <klausman@schwarzvogel.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216885 Fixes: 908d325e1665 ("HID: logitech-hidpp: Detect hi-res scrolling support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230203101800.139380-1-hadess@hadess.net Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-02-06HID: core: Fix deadloop in hid_apply_multiplier.Xin Zhao
The initial value of hid->collection[].parent_idx if 0. When Report descriptor doesn't contain "HID Collection", the value remains as 0. In the meanwhile, when the Report descriptor fullfill all following conditions, it will trigger hid_apply_multiplier function call. 1. Usage page is Generic Desktop Ctrls (0x01) 2. Usage is RESOLUTION_MULTIPLIER (0x48) 3. Contain any FEATURE items The while loop in hid_apply_multiplier will search the top-most collection by searching parent_idx == -1. Because all parent_idx is 0. The loop will run forever. There is a Report Descriptor triggerring the deadloop 0x05, 0x01, // Usage Page (Generic Desktop Ctrls) 0x09, 0x48, // Usage (0x48) 0x95, 0x01, // Report Count (1) 0x75, 0x08, // Report Size (8) 0xB1, 0x01, // Feature Signed-off-by: Xin Zhao <xnzhao@google.com> Link: https://lore.kernel.org/r/20230130212947.1315941-1-xnzhao@google.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-02-06net: microchip: sparx5: fix PTP init/deinit not checking all portsCasper Andersson
Check all ports instead of just port_count ports. PTP init was only checking ports 0 to port_count. If the hardware ports are not mapped starting from 0 then they would be missed, e.g. if only ports 20-30 were mapped it would attempt to init ports 0-10, resulting in NULL pointers when attempting to timestamp. Now it will init all mapped ports. Fixes: 70dfe25cd866 ("net: sparx5: Update extraction/injection for timestamping") Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-06uapi: add missing ip/ipv6 header dependencies for linux/stddef.hHerton R. Krzesinski
Since commit 58e0be1ef6118 ("net: use struct_group to copy ip/ipv6 header addresses"), ip and ipv6 headers started to use the __struct_group definition, which is defined at include/uapi/linux/stddef.h. However, linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h, which breaks build of xskxceiver bpf selftest if you install the uapi headers in the system: $ make V=1 xskxceiver -C tools/testing/selftests/bpf ... make: Entering directory '(...)/tools/testing/selftests/bpf' gcc -g -O0 -rdynamic -Wall -Werror (...) In file included from xskxceiver.c:79: /usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’ 103 | __struct_group(/* no tag */, addrs, /* no attrs */, | ^~~~~~~~~~~~~~ ... Include the missing <linux/stddef.h> dependency in ip.h and do the same for the ipv6.h header. Fixes: 58e0be1ef611 ("net: use struct_group to copy ip/ipv6 header addresses") Signed-off-by: Herton R. Krzesinski <herton@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-06neigh: make sure used and confirmed times are validJulian Anastasov
Entries can linger in cache without timer for days, thanks to the gc_thresh1 limit. As result, without traffic, the confirmed time can be outdated and to appear to be in the future. Later, on traffic, NUD_STALE entries can switch to NUD_DELAY and start the timer which can see the invalid confirmed time and wrongly switch to NUD_REACHABLE state instead of NUD_PROBE. As result, timer is set many days in the future. This is more visible on 32-bit platforms, with higher HZ value. Why this is a problem? While we expect unused entries to expire, such entries stay in REACHABLE state for too long, locked in cache. They are not expired normally, only when cache is full. Problem and the wrong state change reported by Zhang Changzhong: 172.16.1.18 dev bond0 lladdr 0a:0e:0f:01:12:01 ref 1 used 350521/15994171/350520 probes 4 REACHABLE 350520 seconds have elapsed since this entry was last updated, but it is still in the REACHABLE state (base_reachable_time_ms is 30000), preventing lladdr from being updated through probe. Fix it by ensuring timer is started with valid used/confirmed times. Considering the valid time range is LONG_MAX jiffies, we try not to go too much in the past while we are in DELAY/PROBE state. There are also places that need used/updated times to be validated while timer is not running. Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Tested-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-05Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull ELF fix from Al Viro: "One of the many equivalent build warning fixes for !CONFIG_ELF_CORE configs. Geert's is the earliest one I've been able to find" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: coredump: Move dump_emit_page() to kill unused warning
2023-02-05Linux 6.2-rc7v6.2-rc7Linus Torvalds
2023-02-05Merge tag 'usb-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes that resolve some reported problems. These include: - gadget driver fixes - dwc3 driver fix - typec driver fix - MAINTAINERS file update. All of these have been in linux-next with no reported problems" * tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Don't attempt to resume the ports before they exist usb: gadget: udc: do not clear gadget driver.bus usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait usb: dwc3: qcom: enable vbus override when in OTG dr-mode MAINTAINERS: Add myself as UVC Gadget Maintainer
2023-02-05Merge tag 'tty-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small serial and vt fixes. These include: - 8250 driver fixes relating to dma issues - stm32 serial driver fix for threaded irqs - vc_screen bugfix for reported problems. All have been in linux-next for a while with no reported problems" * tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF serial: 8250_dma: Fix DMA Rx rearm race serial: 8250_dma: Fix DMA Rx completion race serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
2023-02-05Merge tag 'char-misc-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a number of small char/misc/whatever driver fixes. They include: - IIO driver fixes for some reported problems - nvmem driver fixes - fpga driver fixes - debugfs memory leak fix in the hv_balloon and irqdomain code (irqdomain change was acked by the maintainer) All have been in linux-next with no reported problems" * tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits) kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup() HV: hv_balloon: fix memory leak with using debugfs_lookup() nvmem: qcom-spmi-sdam: fix module autoloading nvmem: core: fix return value nvmem: core: fix cell removal on error nvmem: core: fix device node refcounting nvmem: core: fix registration vs use race nvmem: core: fix cleanup after dev_set_name() nvmem: core: remove nvmem_config wp_gpio nvmem: core: initialise nvmem->id early nvmem: sunxi_sid: Always use 32-bit MMIO reads nvmem: brcm_nvram: Add check for kzalloc iio: imu: fxos8700: fix MAGN sensor scale and unit iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN iio: imu: fxos8700: fix failed initialization ODR mode assignment iio: imu: fxos8700: fix incorrect ODR mode readback iio: light: cm32181: Fix PM support on system with 2 I2C resources iio: hid: fix the retval in gyro_3d_capture_sample iio: hid: fix the retval in accel_3d_capture_sample iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m ...
2023-02-05Merge tag 'fbdev-for-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: - fix fbcon to prevent fonts bigger than 32x32 pixels to avoid overflows reported by syzbot - switch omapfb to use kstrtobool() - switch some fbdev drivers to use the backlight helpers * tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbcon: Check font dimension limits fbdev: omapfb: Use kstrtobool() instead of strtobool() fbdev: fbmon: fix function name in kernel-doc fbdev: atmel_lcdfb: Rework backlight status updates fbdev: riva: Use backlight helper fbdev: omapfb: panel-dsi-cm: Use backlight helper fbdev: nvidia: Use backlight helper fbdev: mx3fb: Use backlight helper fbdev: radeon: Use backlight helper fbdev: atyfb: Use backlight helper fbdev: aty128fb: Use backlight helper
2023-02-05Merge tag 'x86_urgent_for_v6.2_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: - Prevent the compiler from reordering accesses to debug regs which could cause a #VC exception in SEV-ES guests at the wrong place in the NMI handling path * tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses
2023-02-05Merge tag 'perf_urgent_for_v6.2_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Borislav Petkov: - Lock the proper critical section when dealing with perf event context * tag 'perf_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_pmu_context serialization
2023-02-04Merge tag 'powerpc-6.2-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "It's a bit of a big batch for rc6, but just because I didn't send any fixes the last week or two while I was on vacation, next week should be quieter: - Fix a few objtool warnings since we recently enabled objtool. - Fix a deadlock with the hash MMU vs perf record. - Fix perf profiling of asynchronous interrupt handlers. - Revert the IMC PMU nest_init_lock to being a mutex. - Two commits fixing problems with the kexec_file FDT size estimation. - Two commits fixing problems with strict RWX vs kernels running at non-zero. - Reconnect tlb_flush() to hash__tlb_flush() Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy, and Sourabh Jain" * tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush() powerpc/kexec_file: Count hot-pluggable memory in FDT estimate powerpc/64s/radix: Fix RWX mapping with relocated kernel powerpc/64s/radix: Fix crash with unaligned relocated kernel powerpc/kexec_file: Fix division by zero in extra size estimation powerpc/imc-pmu: Revert nest_init_lock to being a mutex powerpc/64: Fix perf profiling asynchronous interrupt handlers powerpc/64s: Fix local irq disable when PMIs are disabled powerpc/kvm: Fix unannotated intra-function call warning powerpc/85xx: Fix unannotated intra-function call warning
2023-02-04Merge tag 'rtc-6.2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Here are a few fixes for 6.2. The EFI one is the most important as it allows some RTCs to actually work. The other two are warnings that are worth fixing. - efi: make WAKEUP services optional - sunplus: fix format string warning" * tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: sunplus: fix format string for printing resource dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property rtc: efi: Enable SET/GET WAKEUP services as optional
2023-02-04Merge tag 'kbuild-fixes-v6.2-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix two bugs (for building and for signing) when MODULE_SIG_KEY contains a PKCS#11 URI * tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI certs: Fix build error when PKCS#11 URI contains semicolon
2023-02-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM64: - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: aarch64: Test read-only PT memory regions KVM: selftests: aarch64: Fix check of dirty log PT write KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs KVM: selftests: aarch64: Relax userfaultfd read vs. write checks KVM: arm64: Allow no running vcpu on saving vgic3 pending table KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status KVM: arm64: Add helper vgic_write_guest_lock()
2023-02-04Merge tag 'parisc-for-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit kernel - pdc_iodc_print() dropped chars for newline in strings - Drop constants in favour of PRIV_USER - use safer strscpy() function in pdc_stable driver * tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c parisc: Fix return code of pdc_iodc_print() parisc: pdc_stable: use strscpy() to instead of strncpy()
2023-02-04Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC mailing list update from Stafford Horne: "The old mailing list for OpenRISC died due to some infrastructure issues and the people in charge decided not to keep it running. We have migrated this and the users over to kernel.org infrastructure. Sending this out now to avoid kernel developers getting lots of bounced mails for using the old list" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: Update OpenRISC mailing list
2023-02-04Merge tag 'kvmarm-fixes-6.2-3' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.2, take #3 - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle
2023-02-04fbcon: Check font dimension limitsSamuel Thibault
blit_x and blit_y are u32, so fbcon currently cannot support fonts larger than 32x32. The 32x32 case also needs shifting an unsigned int, to properly set bit 31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font", as reported on: http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com Kernel Branch: 6.2.0-rc5-next-20230124 Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharing Reported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Fixes: 2d2699d98492 ("fbcon: font setting should check limitation of driver") Cc: stable@vger.kernel.org Tested-by: Miko Larsson <mikoxyzzz@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Helge Deller <deller@gmx.de>
2023-02-03Merge branch 'ionic-code-maintenance'Jakub Kicinski
Shannon Nelson says: ==================== ionic: code maintenance These are a few fixes for a hardware bug, a couple of sw bugs, and a little code cleanup. ==================== Link: https://lore.kernel.org/r/20230202215537.69756-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: missed doorbell workaroundAllen Hubbe
In one version of the HW there is a remote possibility that it will miss the doorbell ring. This adds a bit of protection to be sure we don't stall a queue from a missed doorbell. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: clear up notifyq alloc commentaryShannon Nelson
Make sure the q+cq alloc for NotifyQ is clearly documented and don't bother with unnecessary local variables. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: clean interrupt before enabling queue to avoid credit raceNeel Patel
Clear the interrupt credits before enabling the queue rather than after to be sure that the enabled queue starts at 0 and that we don't wipe away possible credits after enabling the queue. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Neel Patel <neel.patel@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHYHeiner Kallweit
Jerome provided the information that also the GXL internal PHY doesn't support MMD register access and EEE. MMD reads return 0xffff, what results in e.g. completely wrong ethtool --show-eee output. Therefore use the MMD dummy stubs. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/84432fe4-0be4-bc82-4e5c-557206b40f56@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03net: macb: Perform zynqmp dynamic configuration only for SGMII interfaceRadhey Shyam Pandey
In zynqmp platforms where firmware supports dynamic SGMII configuration but has other non-SGMII ethernet devices, it fails them with no packets received at the RX interface. To fix this behaviour perform SGMII dynamic configuration only for the SGMII phy interface. Fixes: 32cee7818111 ("net: macb: Add zynqmp SGMII dynamic configuration support") Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reported-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1675340779-27499-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03bonding: fix error checking in bond_debug_reregister()Qi Zheng
Since commit ff9fb72bc077 ("debugfs: return error values, not NULL") changed return value of debugfs_rename() in error cases from %NULL to %ERR_PTR(-ERROR), we should also check error values instead of NULL. Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20230202093256.32458-1-zhengqi.arch@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03Merge tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "A bit bigger than I'd like at this point, but mostly a bunch of little fixes. In detail: - NVMe pull request via Christoph: - Fix a missing queue put in nvmet_fc_ls_create_association (Amit Engel) - Clear queue pointers on tag_set initialization failure (Maurizio Lombardi) - Use workqueue dedicated to authentication (Shin'ichiro Kawasaki) - Fix for an overflow in ublk (Liu) - Fix for leaking a queue reference in block cgroups (Ming) - Fix for a use-after-free in BFQ (Yu)" * tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux: blk-cgroup: don't update io stat for root cgroup nvme-auth: use workqueue dedicated to authentication nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association block: Fix the blk_mq_destroy_queue() documentation block: ublk: extending queue_size to fix overflow block, bfq: fix uaf for bfqq in bic_set_bfqq()
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 19:49:00 +0000