| Age | Commit message (Collapse) | Author |
|---|
|
Hauppauge QuadHD/1265/5525 boards all use i2c device drivers and
have tuner_type equal TUNER_ABSENT. This means additional support
is required to enable the analog tuning capability, a case
statement is used to identify these models.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Enables the analog tuning frontend for Hauppauge HVR-5525.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Enables the analog tuning frontend for Hauppauge HVR-1265_K4.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add analog tuner frontend to 888 Hauppauge QuadHD boards
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In some debugging cases it is useful to know how long it took
signal lock to happen after tuning. This can help diagnose
line issues.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
To detect errors in the tuning operation, this waits up 40ms for operation
completion status. This allows for error detection and prevents issuing
additional commands to the tuner before it is finished.
Tuning typically completes in 20-30ms.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Include set_analog_params, get_frequency, and get_bandwidth.
Tested with NTSC and PAL standards via ch3/4 generator. Other standards
are included, but are untested due to lack of generator.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Getting the Xtal trim property to check if running is less error prone.
Reset if_frequency if state is unknown.
Replaces the previous "garbage check".
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Check error status bit on command execute, if error bit is
set return -EAGAIN. Ignore -EAGAIN in probe during device check.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Enable flags to get status of commands sent to the tuner.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The rockchip vdec block is a stateless decoder that's able to decode
H264, HEVC and VP9 content. This commit adds the core infrastructure
and the H264 backend. Support for VP9 and HEVS will be added later on.
[mchehab+huawei@kernel.org: select MEDIA_CONTROLLER and REQUEST_API]
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document the Rockchip RK3399 Video Decoder bindings.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Now that the core provides generic reflist builders, we can use them
instead of implementing our own.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Building those list is a standard procedure described in section
'8.2.4 Decoding process for reference picture lists construction' of
the H264 specification.
We already have 2 drivers needing the same logic (hantro and rkvdec) and
I suspect we will soon have more.
Let's provide generic helpers to create those lists.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Instead of depending on the Rockchip PHY driver the ISP driver
should really depend on CONFIG_GENERIC_PHY_MIPI_DPHY,
given all it needs is the phy_mipi_dphy_get_default_config() symbol.
Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The driver is perfectly capable of being built without CONFIG_OF.
Remove this dependency, which is useful for compile-only tests.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If CONFIG_OF is not selected, the compiler will complain:
drivers/staging/media/rkisp1/rkisp1-dev.c: In function ‘rkisp1_probe’:
drivers/staging/media/rkisp1/rkisp1-dev.c:457:22: warning: unused variable ‘node’ [-Wunused-variable]
457 | struct device_node *node = pdev->dev.of_node;
Rework the code slightly and make the compiler happy.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
v4l2_fh struct define differently by CONFIG_V4L2_MEM2MEM_DEV.
If some vendors use CONFIG_V4L2_MEM2MEM_DEV by module,
it can make the mismatch of v4l2_fh sturct.
By the mismatch, the following error occurs.
===============================
[ 7.533506] v4l2_mem2mem: disagrees about version of symbol video_devdata
[ 7.533594] v4l2_mem2mem: Unknown symbol video_devdata (err -22)
[ 7.535319] v4l2_mem2mem: disagrees about version of symbol v4l2_event_pending
[ 7.542532] v4l2_mem2mem: Unknown symbol v4l2_event_pending (err -22)
===============================
So v4l2_fh struct is modified to does not have dependency
for CONFIG_V4L2_MEM2MEM_DEV.
Signed-off-by: Seungchul Kim <sc377.kim@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The fields 'fmt_type' in the structs
'rkisp1_rsz_config', 'rkisp1_isp_mbus_info' are of type
'v4l2_pixel_encoding' so it is nicer to change their name to
'pixel_enc'. Also change the define 'RKISP1_DEF_FMT_TYPE' to
'RKISP1_DEF_PIXEL_ENC'
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
rkisp1_capture_fmt_cfg
The pixel encoding can be retrieved from the cap->pix.info.
Therefore the field fmt_type can be removed from the
struct rkisp1_capture_fmt_cfg.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The enum rkisp1_fmt_pix_type that holds the pixel format
which is one of RGB, YUV, BAYER, can be replace by the
v4l2 enum v4l2_pixel_encoding.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Enabling CONFIG_DMA_API_DEBUG=y and CONFIG_DMA_API_DEBUG_SG=y will
enable extra validation on DMA operations ensuring that the size
restraints are met.
When using the FCP in conjunction with the VSP1/DU, and display frames,
the size of the DMA operations is larger than the default maximum
segment size reported by the DMA core (64K). With the DMA debug enabled,
this produces a warning such as the following:
"DMA-API: rcar-fcp fea27000.fcp: mapping sg segment longer than device
claims to support [len=3145728] [max=65536]"
We have no specific limitation on the segment size which isn't already
handled by the VSP1/DU which actually handles the DMA allcoations and
buffer management, so define a maximum segment size of up to 4GB (a 32
bit mask).
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 7b49235e83b2 ("[media] v4l: Add Renesas R-Car FCP driver")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
remove the TODO item:
* Make sure uapi structs have the same size and layout in 32 and 62 bits,
and that there are no holes in the structures (pahole is a utility that
can be used to test this).
It was tested with pahole and found compatible.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If these functions fail then we return success, but we should instead
preserve negative error code and return that.
Fixes: fde649b418d1 ("media: vicodec: Register another node for stateless decoder")
Fixes: c022a4a95722 ("media: vicodec: add struct for encoder/decoder instance")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Improve the documentation by providing examples on how to test camera
capture on imx6q-sabresd via v4l2-ctl and Gstreamer.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam<slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In order to improve the documentation, provide the OV5640 MIPI module
part number that is used on the imx6q-sabresd board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The current example for imx6q-sabresd is for a direct conversion pipeline.
Provide an extra example using unprocessed video capture for completeness.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The current instructions for imx6q-sabresd do not lead to functional
capture on OV5640 MIPI CSI-2.
The reason for this, as explained by Steve Longerbeam, is that OV5640 by
default transmits on virtual channel 0, not channel 1 as is given in the
instructions.
Adapt the instructions to use virtual channel 0 so that a working
camera setup can be achieved on imx6q-sabresd.
Also, since we are using an IC direct conversion pipeline, improve
the example by demonstrating colorspace and scaling.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam<slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add H264 profile "Contrained High" and H264 levels "5.2",
"6.0", "6.1" and "6.2".
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add H264 profile "Contrained High" and H264 levels "5.2",
"6.0", "6.1" and "6.2".
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently v4l2-compliance tool returns the following output:
Compliance test for imx-media-csc-s device /dev/video8:
Driver Info:
Driver name : imx-media-csc-s
Card type : imx-media-csc-scaler
Bus info : platform:imx-media-csc-scaler
The driver name string is limited to 16 characters, so provide
a shorter name in order to get a better output.
While at it, use the same shorter name for driver, card and platform.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The variable status is being assigned a value that is never read.
The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
aliases property name must include only lowercase and '-'. Fix in dts
and driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The pointer 'common' is being assigned with a value that is never read,
the assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The imx_media_mbus_fmt_to_pix_fmt() and imx_media_mbus_fmt_to_ipu_image()
functions do not need to modify their mbus argument, and
imx_media_ipu_image_to_mbus_fmt() does not need to modify its ipu_image
argument. Make them const.
[slongerbeam@gmail.com: Constified mbus arg to
imx_media_mbus_fmt_to_ipu_image(), and ipu_image
arg to imx_media_ipu_image_to_mbus_fmt(), as well]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Rename the format lookup and enumeration functions according to their
usage:
- Rename imx_media_(find|enum)_format() to *_pixel_format() to
explicitly state on what formats the functions operate. This aligns
the naming scheme with the media bus and IPU format functions that
already end with *_mbus_format() and *_ipu_formats().
- Rename all enumeration functions to pluralize 'formats' at the end, as
they enumerate multiple formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
To make the code easier to follow, split up find_format() into separate
search functions for pixel formats and media-bus codes, and inline
find_format() into the exported functions imx_media_find_format()
and imx_media_find_mbus_format().
Do the equivalent for enum_format().
Also add comment blocks for the exported find|enum functions.
The convenience functions imx_media_find_ipu_format() and
imx_media_enum_ipu_format() can now be made inline and moved to
imx-media.h.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The imx_media_pixfmt structures include a codes member that stores
media bus codes as a fixed array of 4 integers. The functions dealing
with the imx_media_pixfmt structures assume that the array of codes is
terminated by a 0 element. This mechanism is fragile, as demonstrated
by several instances of the structure containing 4 non-zero codes.
Fix this by turning the array into a pointer, and providing an
IMX_BUS_FMTS macro to initialize the codes member with a guaranteed 0
element at the end.
[Fixed a NULL deref of the codes pointer in a couple places]
[Added more comments for the struct imx_media_pixfmt members,
including a bold NOTE! for future developers that codes pointer
is NULL for the in-memory-only formats]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add a PIXFMT_SEL_IPU selection flag, to select only the IPU-internal
pixel formats, and move the single-entry IPU-internal pixel format
arrays into pixel_formats[]. imx_media_find_ipu_format() and
imx_media_enum_ipu_format() can now simply call find_format() and
enum_format().
The RGB32 format is both an IPU-internal format, and an in-memory format
via idmac channels that is supported by the IPUv3 driver, so it appears
twice in pixel_formats[], one with ipufmt=false for the in-memory format,
and again with ipufmt=true for the IPU-internal format.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
After the introduction of the CS_SEL_BAYER flag, the "codespace"
pixel format selection enumeration wording no longer makes sense
(and even before, when selecting between YUV or RGB formats,
"codespace" was a misuse of the term).
Rename
- 'enum codespace_sel' to 'enum imx_pixfmt_sel'
- CS_SEL_* to PIXFMT_SEL_*
- local vars named cs_sel to fmt_sel or just sel
No functional changes.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
- imx_media_capture_device_register() needs to use CS_SEL_ANY when
finding the format from the attached source subdevice, because the
source can be a CSI which supports bayer, and the CSI may have selected
a bayer format when it registered.
- Likewise, imx_media_init_mbus_fmt() is called from the CSI, so the
function may be passed a bayer code. Use CS_SEL_ANY when locating
the format.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The format lookup (and enumeration) functions take a boolean flag to
tell if Bayer formats should be considered. This leads to hard to read
lines such as
return enum_format(fourcc, NULL, index, cs_sel, true, false);
where the boolean parameters can easily be mixed. To make the code
clearer, add a CS_SEL_BAYER flag that can be passed through the
codespace_sel parameter of the lookup functions to replace the bool
parameter.
[slongerbeam@gmail.com: Instead of declaring CS_SEL_ANY as a bitfield
containing only CS_SEL_YUV | CS_SEL_RGB, declare CS_SEL_ANY as all of
the above (YUV, RGB, BAYER). A new enum is declared for the YUV | RGB
selection as CS_SEL_YUV_RGB, and that is used by sub-devices that
don't support BAYER and only allow selecting and enumerating YUV or RGB
encodings. CS_SEL_ANY is now only used by the CSI sub-devices and the
attached capture interfaces, since only those devices support BAYER
formats.]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The init_mbus_colorimetry() function is small and used in a single
place. The code becomes easier to follow if it gets inline in its
caller. Do so.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Iterate over all media bus formats, not just over the first format in
each imx_media_pixfmt entry.
Before:
$ v4l2-ctl -d $(media-ctl -e ipu1_csi0) --list-subdev-mbus-codes 0
ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0)
0x2006: MEDIA_BUS_FMT_UYVY8_2X8
0x2008: MEDIA_BUS_FMT_YUYV8_2X8
0x1008: MEDIA_BUS_FMT_RGB565_2X8_LE
0x100a: MEDIA_BUS_FMT_RGB888_1X24
0x100d: MEDIA_BUS_FMT_ARGB8888_1X32
0x3001: MEDIA_BUS_FMT_SBGGR8_1X8
0x3013: MEDIA_BUS_FMT_SGBRG8_1X8
0x3002: MEDIA_BUS_FMT_SGRBG8_1X8
0x3014: MEDIA_BUS_FMT_SRGGB8_1X8
0x3007: MEDIA_BUS_FMT_SBGGR10_1X10
0x300e: MEDIA_BUS_FMT_SGBRG10_1X10
0x300a: MEDIA_BUS_FMT_SGRBG10_1X10
0x300f: MEDIA_BUS_FMT_SRGGB10_1X10
0x2001: MEDIA_BUS_FMT_Y8_1X8
0x200a: MEDIA_BUS_FMT_Y10_1X10
After:
$ v4l2-ctl -d $(media-ctl -e ipu1_csi0) --list-subdev-mbus-codes 0
ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0)
0x2006: MEDIA_BUS_FMT_UYVY8_2X8
0x200f: MEDIA_BUS_FMT_UYVY8_1X16
0x2008: MEDIA_BUS_FMT_YUYV8_2X8
0x2011: MEDIA_BUS_FMT_YUYV8_1X16
0x1008: MEDIA_BUS_FMT_RGB565_2X8_LE
0x100a: MEDIA_BUS_FMT_RGB888_1X24
0x100c: MEDIA_BUS_FMT_RGB888_2X12_LE
0x100d: MEDIA_BUS_FMT_ARGB8888_1X32
0x3001: MEDIA_BUS_FMT_SBGGR8_1X8
0x3013: MEDIA_BUS_FMT_SGBRG8_1X8
0x3002: MEDIA_BUS_FMT_SGRBG8_1X8
0x3014: MEDIA_BUS_FMT_SRGGB8_1X8
0x3007: MEDIA_BUS_FMT_SBGGR10_1X10
0x3008: MEDIA_BUS_FMT_SBGGR12_1X12
0x3019: MEDIA_BUS_FMT_SBGGR14_1X14
0x301d: MEDIA_BUS_FMT_SBGGR16_1X16
0x300e: MEDIA_BUS_FMT_SGBRG10_1X10
0x3010: MEDIA_BUS_FMT_SGBRG12_1X12
0x301a: MEDIA_BUS_FMT_SGBRG14_1X14
0x301e: MEDIA_BUS_FMT_SGBRG16_1X16
0x300a: MEDIA_BUS_FMT_SGRBG10_1X10
0x3011: MEDIA_BUS_FMT_SGRBG12_1X12
0x301b: MEDIA_BUS_FMT_SGRBG14_1X14
0x301f: MEDIA_BUS_FMT_SGRBG16_1X16
0x300f: MEDIA_BUS_FMT_SRGGB10_1X10
0x3012: MEDIA_BUS_FMT_SRGGB12_1X12
0x301c: MEDIA_BUS_FMT_SRGGB14_1X14
0x3020: MEDIA_BUS_FMT_SRGGB16_1X16
0x2001: MEDIA_BUS_FMT_Y8_1X8
0x200a: MEDIA_BUS_FMT_Y10_1X10
0x2013: MEDIA_BUS_FMT_Y12_1X12
[laurent.pinchart@ideasonboard.com: Decrement index to replace loop counter k]
[laurent.pinchart@ideasonboard.com: Return directly from within the loops]
Fixes: e130291212df5 ("[media] media: Add i.MX media core driver")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Merge yuv_formats and rgb_formats into a single array. Always loop over
all entries, skipping those that do not match the requested search
criteria. This simplifies the code, lets us get rid of the manual
counting of array entries, and stops accidentally ignoring some non-mbus
RGB formats.
Before:
$ v4l2-ctl -d /dev/video14 --list-formats-out
ioctl: VIDIOC_ENUM_FMT
Type: Video Output
[0]: 'UYVY' (UYVY 4:2:2)
[1]: 'YUYV' (YUYV 4:2:2)
[2]: 'YU12' (Planar YUV 4:2:0)
[3]: 'YV12' (Planar YVU 4:2:0)
[4]: '422P' (Planar YUV 4:2:2)
[5]: 'NV12' (Y/CbCr 4:2:0)
[6]: 'NV16' (Y/CbCr 4:2:2)
[7]: 'RGBP' (16-bit RGB 5-6-5)
[8]: 'RGB3' (24-bit RGB 8-8-8)
[9]: 'BX24' (32-bit XRGB 8-8-8-8)
After:
$ v4l2-ctl -d /dev/video14 --list-formats-out
ioctl: VIDIOC_ENUM_FMT
Type: Video Output
[0]: 'UYVY' (UYVY 4:2:2)
[1]: 'YUYV' (YUYV 4:2:2)
[2]: 'YU12' (Planar YUV 4:2:0)
[3]: 'YV12' (Planar YVU 4:2:0)
[4]: '422P' (Planar YUV 4:2:2)
[5]: 'NV12' (Y/CbCr 4:2:0)
[6]: 'NV16' (Y/CbCr 4:2:2)
[7]: 'RGBP' (16-bit RGB 5-6-5)
[8]: 'RGB3' (24-bit RGB 8-8-8)
[9]: 'BGR3' (24-bit BGR 8-8-8)
[10]: 'BX24' (32-bit XRGB 8-8-8-8)
[11]: 'XR24' (32-bit BGRX 8-8-8-8)
[12]: 'RX24' (32-bit XBGR 8-8-8-8)
[13]: 'XB24' (32-bit RGBX 8-8-8-8)
Tested on a imx6q-sabresd.
[laurent.pinchart@ideasonboard.com: Make loop counters unsigned]
[laurent.pinchart@ideasonboard.com: Decrement index instead of adding a counter]
[laurent.pinchart@ideasonboard.com: Return directly from within loop instead of breaking]
[slongerbeam@gmail.com: Fix colorspace comparison error]
Fixes: e130291212df5 ("[media] media: Add i.MX media core driver")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Since the PWM framework is switching struct pwm_state.period's datatype
to u64, prepare for this transition by using DIV_ROUND_CLOSEST_ULL to
handle a 64-bit dividend.
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
While at it, change the log level from 'err' to 'debug'.
Fixes: e6089feca460 ("media: m88ds3103: Add support for ds3103b demod")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This makes it possible to declare dvb_usb_device_properties const.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently when i2c transfers fail the error return -EREMOTEIO
is assigned to err but then later overwritten when the tuner
attach call is made. Fix this by returning early with the
error return code -EREMOTEIO on i2c transfer failure errors.
If the transfer fails, an uninitialized value will be read from b2.
Addresses-Coverity: ("Unused value")
Fixes: fbfee8684ff2 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
