summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-11afs: Fix refcount underflow from error handling raceDavid Howells
If an AFS cell that has an unreachable (eg. ENETUNREACH) server listed (VL server or fileserver), an asynchronous probe to one of its addresses may fail immediately because sendmsg() returns an error. When this happens, a refcount underflow can happen if certain events hit a very small window. The way this occurs is: (1) There are two levels of "call" object, the afs_call and the rxrpc_call. Each of them can be transitioned to a "completed" state in the event of success or failure. (2) Asynchronous afs_calls are self-referential whilst they are active to prevent them from evaporating when they're not being processed. This reference is disposed of when the afs_call is completed. Note that an afs_call may only be completed once; once completed completing it again will do nothing. (3) When a call transmission is made, the app-side rxrpc code queues a Tx buffer for the rxrpc I/O thread to transmit. The I/O thread invokes sendmsg() to transmit it - and in the case of failure, it transitions the rxrpc_call to the completed state. (4) When an rxrpc_call is completed, the app layer is notified. In this case, the app is kafs and it schedules a work item to process events pertaining to an afs_call. (5) When the afs_call event processor is run, it goes down through the RPC-specific handler to afs_extract_data() to retrieve data from rxrpc - and, in this case, it picks up the error from the rxrpc_call and returns it. The error is then propagated to the afs_call and that is completed too. At this point the self-reference is released. (6) If the rxrpc I/O thread manages to complete the rxrpc_call within the window between rxrpc_send_data() queuing the request packet and checking for call completion on the way out, then rxrpc_kernel_send_data() will return the error from sendmsg() to the app. (7) Then afs_make_call() will see an error and will jump to the error handling path which will attempt to clean up the afs_call. (8) The problem comes when the error handling path in afs_make_call() tries to unconditionally drop an async afs_call's self-reference. This self-reference, however, may already have been dropped by afs_extract_data() completing the afs_call (9) The refcount underflows when we return to afs_do_probe_vlserver() and that tries to drop its reference on the afs_call. Fix this by making afs_make_call() attempt to complete the afs_call rather than unconditionally putting it. That way, if afs_extract_data() manages to complete the call first, afs_make_call() won't do anything. The bug can be forced by making do_udp_sendmsg() return -ENETUNREACH and sticking an msleep() in rxrpc_send_data() after the 'success:' label to widen the race window. The error message looks something like: refcount_t: underflow; use-after-free. WARNING: CPU: 3 PID: 720 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 ... RIP: 0010:refcount_warn_saturate+0xba/0x110 ... afs_put_call+0x1dc/0x1f0 [kafs] afs_fs_get_capabilities+0x8b/0xe0 [kafs] afs_fs_probe_fileserver+0x188/0x1e0 [kafs] afs_lookup_server+0x3bf/0x3f0 [kafs] afs_alloc_server_list+0x130/0x2e0 [kafs] afs_create_volume+0x162/0x400 [kafs] afs_get_tree+0x266/0x410 [kafs] vfs_get_tree+0x25/0xc0 fc_mount+0xe/0x40 afs_d_automount+0x1b3/0x390 [kafs] __traverse_mounts+0x8f/0x210 step_into+0x340/0x760 path_openat+0x13a/0x1260 do_filp_open+0xaf/0x160 do_sys_openat2+0xaf/0x170 or something like: refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0x99/0xda ... afs_put_call+0x4a/0x175 afs_send_vl_probes+0x108/0x172 afs_select_vlserver+0xd6/0x311 afs_do_cell_detect_alias+0x5e/0x1e9 afs_cell_detect_alias+0x44/0x92 afs_validate_fc+0x9d/0x134 afs_get_tree+0x20/0x2e6 vfs_get_tree+0x1d/0xc9 fc_mount+0xe/0x33 afs_d_automount+0x48/0x9d __traverse_mounts+0xe0/0x166 step_into+0x140/0x274 open_last_lookups+0x1c1/0x1df path_openat+0x138/0x1c3 do_filp_open+0x55/0xb4 do_sys_openat2+0x6c/0xb6 Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting") Reported-by: Bill MacAllister <bill@ca-zephyr.org> Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1052304 Suggested-by: Jeffrey E Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/2633992.1702073229@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-12-11smb: client: fix OOB in smb2_query_reparse_point()Paulo Alcantara
Validate @ioctl_rsp->OutputOffset and @ioctl_rsp->OutputCount so that their sum does not wrap to a number that is smaller than @reparse_buf and we end up with a wild pointer as follows: BUG: unable to handle page fault for address: ffff88809c5cd45f #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 4a01067 P4D 4a01067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 1260 Comm: mount.cifs Not tainted 6.7.0-rc4 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:smb2_query_reparse_point+0x3e0/0x4c0 [cifs] Code: ff ff e8 f3 51 fe ff 41 89 c6 58 5a 45 85 f6 0f 85 14 fe ff ff 49 8b 57 48 8b 42 60 44 8b 42 64 42 8d 0c 00 49 39 4f 50 72 40 <8b> 04 02 48 8b 9d f0 fe ff ff 49 8b 57 50 89 03 48 8b 9d e8 fe ff RSP: 0018:ffffc90000347a90 EFLAGS: 00010212 RAX: 000000008000001f RBX: ffff88800ae11000 RCX: 00000000000000ec RDX: ffff88801c5cd440 RSI: 0000000000000000 RDI: ffffffff82004aa4 RBP: ffffc90000347bb0 R08: 00000000800000cd R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000024 R12: ffff8880114d4100 R13: ffff8880114d4198 R14: 0000000000000000 R15: ffff8880114d4000 FS: 00007f02c07babc0(0000) GS:ffff88806ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88809c5cd45f CR3: 0000000011750000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x181/0x480 ? search_module_extables+0x19/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x1b6/0x1c0 ? asm_exc_page_fault+0x26/0x30 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? smb2_query_reparse_point+0x3e0/0x4c0 [cifs] cifs_get_fattr+0x16e/0xa50 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0xbf/0x2b0 cifs_root_iget+0x163/0x5f0 [cifs] cifs_smb3_do_mount+0x5bd/0x780 [cifs] smb3_get_tree+0xd9/0x290 [cifs] vfs_get_tree+0x2c/0x100 ? capable+0x37/0x70 path_mount+0x2d7/0xb80 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __x64_sys_mount+0x11a/0x150 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f02c08d5b1e Fixes: 2e4564b31b64 ("smb3: add support for stat of WSL reparse points for special file types") Cc: stable@vger.kernel.org Reported-by: Robert Morris <rtm@csail.mit.edu> Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-11smb: client: fix NULL deref in asn1_ber_decoder()Paulo Alcantara
If server replied SMB2_NEGOTIATE with a zero SecurityBufferOffset, smb2_get_data_area() sets @len to non-zero but return NULL, so decode_negTokeninit() ends up being called with a NULL @security_blob: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 871 Comm: mount.cifs Not tainted 6.7.0-rc4 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:asn1_ber_decoder+0x173/0xc80 Code: 01 4c 39 2c 24 75 09 45 84 c9 0f 85 2f 03 00 00 48 8b 14 24 4c 29 ea 48 83 fa 01 0f 86 1e 07 00 00 48 8b 74 24 28 4d 8d 5d 01 <42> 0f b6 3c 2e 89 fa 40 88 7c 24 5c f7 d2 83 e2 1f 0f 84 3d 07 00 RSP: 0018:ffffc9000063f950 EFLAGS: 00010202 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 000000000000004a RDX: 000000000000004a RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000004d R15: 0000000000000000 FS: 00007fce52b0fbc0(0000) GS:ffff88806ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000001ae64000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x181/0x480 ? __stack_depot_save+0x1e6/0x480 ? exc_page_fault+0x6f/0x1c0 ? asm_exc_page_fault+0x26/0x30 ? asn1_ber_decoder+0x173/0xc80 ? check_object+0x40/0x340 decode_negTokenInit+0x1e/0x30 [cifs] SMB2_negotiate+0xc99/0x17c0 [cifs] ? smb2_negotiate+0x46/0x60 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 smb2_negotiate+0x46/0x60 [cifs] cifs_negotiate_protocol+0xae/0x130 [cifs] cifs_get_smb_ses+0x517/0x1040 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? queue_delayed_work_on+0x5d/0x90 cifs_mount_get_session+0x78/0x200 [cifs] dfs_mount_share+0x13a/0x9f0 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0xbf/0x2b0 ? find_nls+0x16/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 cifs_mount+0x7e/0x350 [cifs] cifs_smb3_do_mount+0x128/0x780 [cifs] smb3_get_tree+0xd9/0x290 [cifs] vfs_get_tree+0x2c/0x100 ? capable+0x37/0x70 path_mount+0x2d7/0xb80 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __x64_sys_mount+0x11a/0x150 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7fce52c2ab1e Fix this by setting @len to zero when @off == 0 so callers won't attempt to dereference non-existing data areas. Reported-by: Robert Morris <rtm@csail.mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-11smb: client: fix potential OOBs in smb2_parse_contexts()Paulo Alcantara
Validate offsets and lengths before dereferencing create contexts in smb2_parse_contexts(). This fixes following oops when accessing invalid create contexts from server: BUG: unable to handle page fault for address: ffff8881178d8cc3 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 4a01067 P4D 4a01067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1736 Comm: mount.cifs Not tainted 6.7.0-rc4 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:smb2_parse_contexts+0xa0/0x3a0 [cifs] Code: f8 10 75 13 48 b8 93 ad 25 50 9c b4 11 e7 49 39 06 0f 84 d2 00 00 00 8b 45 00 85 c0 74 61 41 29 c5 48 01 c5 41 83 fd 0f 76 55 <0f> b7 7d 04 0f b7 45 06 4c 8d 74 3d 00 66 83 f8 04 75 bc ba 04 00 RSP: 0018:ffffc900007939e0 EFLAGS: 00010216 RAX: ffffc90000793c78 RBX: ffff8880180cc000 RCX: ffffc90000793c90 RDX: ffffc90000793cc0 RSI: ffff8880178d8cc0 RDI: ffff8880180cc000 RBP: ffff8881178d8cbf R08: ffffc90000793c22 R09: 0000000000000000 R10: ffff8880180cc000 R11: 0000000000000024 R12: 0000000000000000 R13: 0000000000000020 R14: 0000000000000000 R15: ffffc90000793c22 FS: 00007f873753cbc0(0000) GS:ffff88806bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881178d8cc3 CR3: 00000000181ca000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x181/0x480 ? search_module_extables+0x19/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x1b6/0x1c0 ? asm_exc_page_fault+0x26/0x30 ? smb2_parse_contexts+0xa0/0x3a0 [cifs] SMB2_open+0x38d/0x5f0 [cifs] ? smb2_is_path_accessible+0x138/0x260 [cifs] smb2_is_path_accessible+0x138/0x260 [cifs] cifs_is_path_remote+0x8d/0x230 [cifs] cifs_mount+0x7e/0x350 [cifs] cifs_smb3_do_mount+0x128/0x780 [cifs] smb3_get_tree+0xd9/0x290 [cifs] vfs_get_tree+0x2c/0x100 ? capable+0x37/0x70 path_mount+0x2d7/0xb80 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __x64_sys_mount+0x11a/0x150 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f8737657b1e Reported-by: Robert Morris <rtm@csail.mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-11smb: client: fix OOB in receive_encrypted_standard()Paulo Alcantara
Fix potential OOB in receive_encrypted_standard() if server returned a large shdr->NextCommand that would end up writing off the end of @next_buffer. Fixes: b24df3e30cbf ("cifs: update receive_encrypted_standard to handle compounded responses") Cc: stable@vger.kernel.org Reported-by: Robert Morris <rtm@csail.mit.edu> Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-11efi/x86: Avoid physical KASLR on older Dell systemsArd Biesheuvel
River reports boot hangs with v6.6 and v6.7, and the bisect points to commit a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot") which moves the memory allocation and kernel decompression from the legacy decompressor (which executes *after* ExitBootServices()) to the EFI stub, using boot services for allocating the memory. The memory allocation succeeds but the subsequent call to decompress_kernel() never returns, resulting in a failed boot and a hanging system. As it turns out, this issue only occurs when physical address randomization (KASLR) is enabled, and given that this is a feature we can live without (virtual KASLR is much more important), let's disable the physical part of KASLR when booting on AMI UEFI firmware claiming to implement revision v2.0 of the specification (which was released in 2006), as this is the version these systems advertise. Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218173 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-12-11octeontx2-af: Fix pause frame configurationHariprasad Kelam
The current implementation's default Pause Forward setting is causing unnecessary network traffic. This patch disables Pause Forward to address this issue. Fixes: 1121f6b02e7a ("octeontx2-af: Priority flow control configuration support") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-11efi/loongarch: Use load address to calculate kernel entry addressWang Yao
The efi_relocate_kernel() may load the PIE kernel to anywhere, the loaded address may not be equal to link address or EFI_KIMG_PREFERRED_ADDRESS. Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Wang Yao <wangyao@lemote.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-12-11Merge branch 'octeontx2-fixes'David S. Miller
Hariprasad Kelam says: ==================== octeontx2: Fix issues with promisc/allmulti mode When interface is configured in promisc/all multi mode, low network performance observed. This series patches address the same. Patch1: Change the promisc/all multi mcam entry action to unicast if there are no trusted vfs associated with PF. Patch2: Configures RSS flow algorithm in promisc/all multi mcam entries to address flow distribution issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-11octeontx2-af: Update RSS algorithm indexHariprasad Kelam
The RSS flow algorithm is not set up correctly for promiscuous or all multi MCAM entries. This has an impact on flow distribution. This patch fixes the issue by updating flow algorithm index in above mentioned MCAM entries. Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-11octeontx2-pf: Fix promisc mcam entry actionHariprasad Kelam
Current implementation is such that, promisc mcam entry action is set as multicast even when there are no trusted VFs. multicast action causes the hardware to copy packet data, which reduces the performance. This patch fixes this issue by setting the promisc mcam entry action to unicast instead of multicast when there are no trusted VFs. The same change is made for the 'allmulti' mcam entry action. Fixes: ffd2f89ad05c ("octeontx2-pf: Enable promisc/allmulti match MCAM entries.") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-11octeon_ep: explicitly test for firmware ready valueShinas Rasheed
The firmware ready value is 1, and get firmware ready status function should explicitly test for that value. The firmware ready value read will be 2 after driver load, and on unbind till firmware rewrites the firmware ready back to 0, the value seen by driver will be 2, which should be regarded as not ready. Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-11net/sched: act_ct: Take per-cb reference to tcf_ct_flow_tableVlad Buslov
The referenced change added custom cleanup code to act_ct to delete any callbacks registered on the parent block when deleting the tcf_ct_flow_table instance. However, the underlying issue is that the drivers don't obtain the reference to the tcf_ct_flow_table instance when registering callbacks which means that not only driver callbacks may still be on the table when deleting it but also that the driver can still have pointers to its internal nf_flowtable and can use it concurrently which results either warning in netfilter[0] or use-after-free. Fix the issue by taking a reference to the underlying struct tcf_ct_flow_table instance when registering the callback and release the reference when unregistering. Expose new API required for such reference counting by adding two new callbacks to nf_flowtable_type and implementing them for act_ct flowtable_ct type. This fixes the issue by extending the lifetime of nf_flowtable until all users have unregistered. [0]: [106170.938634] ------------[ cut here ]------------ [106170.939111] WARNING: CPU: 21 PID: 3688 at include/net/netfilter/nf_flow_table.h:262 mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.940108] Modules linked in: act_ct nf_flow_table act_mirred act_skbedit act_tunnel_key vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa bonding openvswitch nsh rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_regis try overlay mlx5_core [106170.943496] CPU: 21 PID: 3688 Comm: kworker/u48:0 Not tainted 6.6.0-rc7_for_upstream_min_debug_2023_11_01_13_02 #1 [106170.944361] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [106170.945292] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [106170.945846] RIP: 0010:mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.946413] Code: 89 ef 48 83 05 71 a4 14 00 01 e8 f4 06 04 e1 48 83 05 6c a4 14 00 01 48 83 c4 28 5b 5d 41 5c 41 5d c3 48 83 05 d1 8b 14 00 01 <0f> 0b 48 83 05 d7 8b 14 00 01 e9 96 fe ff ff 48 83 05 a2 90 14 00 [106170.947924] RSP: 0018:ffff88813ff0fcb8 EFLAGS: 00010202 [106170.948397] RAX: 0000000000000000 RBX: ffff88811eabac40 RCX: ffff88811eabad48 [106170.949040] RDX: ffff88811eab8000 RSI: ffffffffa02cd560 RDI: 0000000000000000 [106170.949679] RBP: ffff88811eab8000 R08: 0000000000000001 R09: ffffffffa0229700 [106170.950317] R10: ffff888103538fc0 R11: 0000000000000001 R12: ffff88811eabad58 [106170.950969] R13: ffff888110c01c00 R14: ffff888106b40000 R15: 0000000000000000 [106170.951616] FS: 0000000000000000(0000) GS:ffff88885fd40000(0000) knlGS:0000000000000000 [106170.952329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [106170.952834] CR2: 00007f1cefd28cb0 CR3: 000000012181b006 CR4: 0000000000370ea0 [106170.953482] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [106170.954121] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [106170.954766] Call Trace: [106170.955057] <TASK> [106170.955315] ? __warn+0x79/0x120 [106170.955648] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.956172] ? report_bug+0x17c/0x190 [106170.956537] ? handle_bug+0x3c/0x60 [106170.956891] ? exc_invalid_op+0x14/0x70 [106170.957264] ? asm_exc_invalid_op+0x16/0x20 [106170.957666] ? mlx5_del_flow_rules+0x10/0x310 [mlx5_core] [106170.958172] ? mlx5_tc_ct_block_flow_offload_add+0x1240/0x1240 [mlx5_core] [106170.958788] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.959339] ? mlx5_tc_ct_del_ft_cb+0xc6/0x2b0 [mlx5_core] [106170.959854] ? mapping_remove+0x154/0x1d0 [mlx5_core] [106170.960342] ? mlx5e_tc_action_miss_mapping_put+0x4f/0x80 [mlx5_core] [106170.960927] mlx5_tc_ct_delete_flow+0x76/0xc0 [mlx5_core] [106170.961441] mlx5_free_flow_attr_actions+0x13b/0x220 [mlx5_core] [106170.962001] mlx5e_tc_del_fdb_flow+0x22c/0x3b0 [mlx5_core] [106170.962524] mlx5e_tc_del_flow+0x95/0x3c0 [mlx5_core] [106170.963034] mlx5e_flow_put+0x73/0xe0 [mlx5_core] [106170.963506] mlx5e_put_flow_list+0x38/0x70 [mlx5_core] [106170.964002] mlx5e_rep_update_flows+0xec/0x290 [mlx5_core] [106170.964525] mlx5e_rep_neigh_update+0x1da/0x310 [mlx5_core] [106170.965056] process_one_work+0x13a/0x2c0 [106170.965443] worker_thread+0x2e5/0x3f0 [106170.965808] ? rescuer_thread+0x410/0x410 [106170.966192] kthread+0xc6/0xf0 [106170.966515] ? kthread_complete_and_exit+0x20/0x20 [106170.966970] ret_from_fork+0x2d/0x50 [106170.967332] ? kthread_complete_and_exit+0x20/0x20 [106170.967774] ret_from_fork_asm+0x11/0x20 [106170.970466] </TASK> [106170.970726] ---[ end trace 0000000000000000 ]--- Fixes: 77ac5e40c44e ("net/sched: act_ct: remove and free nf_table callbacks") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-10Linux 6.7-rc5v6.7-rc5Linus Torvalds
2023-12-10bcachefs: Close journal entry if necessary when flushing all pinsKent Overstreet
Since outstanding journal buffers hold a journal pin, when flushing all pins we need to close the current journal entry if necessary so its pin can be released. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-10Merge tag 'sched_urgent_for_v6.7_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Make sure tasks are thawed exactly and only once to avoid their state getting corrupted * tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: freezer,sched: Do not restore saved_state of a thawed task
2023-12-10Merge tag 'perf_urgent_for_v6.7_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Borislav Petkov: - Make sure perf event size validation is done on every event in the group * tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_validate_size()
2023-12-10Merge tag 'x86_urgent_for_v6.7_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add a forgotten CPU vendor check in the AMD microcode post-loading callback so that the callback runs only on AMD - Make sure SEV-ES protocol negotiation happens only once and on the BSP * tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Check vendor in the AMD microcode callback x86/sev: Fix kernel crash due to late update to read-only ghcb_version
2023-12-10octeontx2-af: fix a use-after-free in rvu_nix_register_reportersZhipeng Lu
The rvu_dl will be freed in rvu_nix_health_reporters_destroy(rvu_dl) after the create_workqueue fails, and after that free, the rvu_dl will be translate back through the following call chain: rvu_nix_health_reporters_destroy |-> rvu_nix_health_reporters_create |-> rvu_health_reporters_create |-> rvu_register_dl (label err_dl_health) Finally. in the err_dl_health label, rvu_dl being freed again in rvu_health_reporters_destroy(rvu) by rvu_nix_health_reporters_destroy. In the second calls of rvu_nix_health_reporters_destroy, however, it uses rvu_dl->rvu_nix_health_reporter, which is already freed at the end of rvu_nix_health_reporters_destroy in the first call. So this patch prevents the first destroy by instantly returning -ENONMEN when create_workqueue fails. In addition, since the failure of create_workqueue is the only entrence of label err, it has been integrated into the error-handling path of create_workqueue. Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Generic: - Set .owner for various KVM file_operations so that files refcount the KVM module until KVM is done executing _all_ code, including the last few instructions of kvm_put_kvm(). And then revert the misguided attempt to rely on "struct kvm" refcounts to pin KVM-the-module. ARM: - Do not redo the mapping of vLPIs, if they have already been mapped s390: - Do not leave bits behind in PTEs - Properly catch page invalidations that affect the prefix of a nested guest x86: - When checking if a _running_ vCPU is "in-kernel", i.e. running at CPL0, get the CPL directly instead of relying on preempted_in_kernel (which is valid if and only if the vCPU was preempted, i.e. NOT running). - Fix a benign "return void" that was recently introduced. Selftests: - Makefile tweak for dependency generation - '-Wformat' fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Update EFER software model on CR0 trap for SEV-ES KVM: selftests: add -MP to CFLAGS KVM: selftests: Actually print out magic token in NX hugepages skip message KVM: x86: Remove 'return void' expression for 'void function' Revert "KVM: Prevent module exit until all VMs are freed" KVM: Set file_operations.owner appropriately for all such structures KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode KVM: arm64: GICv4: Do not perform a map to a mapped vLPI KVM: s390/mm: Properly reset no-dat KVM: s390: vsie: fix wrong VIR 37 when MSO is used
2023-12-10net: fec: correct queue selectionRadu Bulie
The old implementation extracted VLAN TCI info from the payload before the VLAN tag has been pushed in the payload. Another problem was that the VLAN TCI was extracted even if the packet did not have VLAN protocol header. This resulted in invalid VLAN TCI and as a consequence a random queue was computed. This patch fixes the above issues and use the VLAN TCI from the skb if it is present or VLAN TCI from payload if present. If no VLAN header is present queue 0 is selected. Fixes: 52c4a1a85f4b ("net: fec: add ndo_select_queue to fix TX bandwidth fluctuations") Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-10bcachefs: Fix uninitialized var in bch2_journal_replay()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-09Merge tag 'powerpc-6.7-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU hotplug while ftrace is active. Thanks to Naveen N Rao. * tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/ftrace: Fix stack teardown in ftrace_no_trace
2023-12-09Merge tag 'gpio-fixes-for-v6.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix an error path after a failed export in sysfs code * tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: sysfs: Fix error handling on failed export
2023-12-09io_uring/af_unix: disable sending io_uring over socketsPavel Begunkov
File reference cycles have caused lots of problems for io_uring in the past, and it still doesn't work exactly right and races with unix_stream_read_generic(). The safest fix would be to completely disallow sending io_uring files via sockets via SCM_RIGHT, so there are no possible cycles invloving registered files and thus rendering SCM accounting on the io_uring side unnecessary. Cc: stable@vger.kernel.org Fixes: 0091bfc81741b ("io_uring/af_unix: defer registered files gc to io_uring release") Reported-and-suggested-by: Jann Horn <jannh@google.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-09atm: solos-pci: Fix potential deadlock on &tx_queue_lockChengfeng Ye
As &card->tx_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #2> pclose() --> spin_lock(&card->tx_queue_lock) <interrupt> --> solos_bh() --> fpga_tx() --> spin_lock(&card->tx_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on &card->tx_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 213e85d38912 ("solos-pci: clean up pclose() function") Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-09atm: solos-pci: Fix potential deadlock on &cli_queue_lockChengfeng Ye
As &card->cli_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #1> console_show() --> spin_lock(&card->cli_queue_lock) <interrupt> --> solos_bh() --> spin_lock(&card->cli_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on the card->cli_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 9c54004ea717 ("atm: Driver for Solos PCI ADSL2+ card.") Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-09Merge tag 'usb-6.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.7-rc5 to resolve some reported issues. Included in here are: - usb gadget f_hid, and uevent fix - xhci driver revert to resolve a much-reported issue - typec driver fix All of these have been in linux-next with no reported issues" * tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_hid: fix report descriptor allocation Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1" usb: typec: class: fix typec_altmode_put_partner to put plugs USB: gadget: core: adjust uevent timing on gadget unbind
2023-12-09Merge tag 'tty-6.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for 6.7-rc4 to resolve some reported issues. Included in here are: - pl011 dma support fix - sc16is7xx driver fix - ma35d1 console index fix - 8250 driver fixes for small issues All of these have been in linux-next with no reported issues" * tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART serial: ma35d1: Validate console index before assignment ARM: PL011: Fix DMA support serial: sc16is7xx: address RX timeout interrupt errata serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit serial: 8250_omap: Add earlycon support for the AM654 UART controller serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
2023-12-09Merge tag 'char-misc-6.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small fixes for 6.7-rc5 for a variety of small driver subsystems. Included in here are: - debugfs revert for reported issue - greybus revert for reported issue - greybus fixup for endian build warning - coresight driver fixes - nvmem driver fixes - devcoredump fix - parport new device id - ndtest build fix All of these have ben in linux-next with no reported issues" * tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: Do not expect fixed layouts to grab a layout driver parport: Add support for Brainboxes IX/UC/PX parallel cards Revert "greybus: gb-beagleplay: Ensure le for values in transport" greybus: gb-beagleplay: Ensure le for values in transport greybus: BeaglePlay driver needs CRC_CCITT Revert "debugfs: annotate debugfs handlers vs. removal with lockdep" devcoredump: Send uevent once devcd is ready ndtest: fix typo class_regster -> class_register misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write misc: mei: client.c: return negative error code in mei_cl_write mei: pxp: fix mei_pxp_send_message return value coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base coresight: ultrasoc-smb: Config SMB buffer before register sink coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb Documentation: coresight: fix `make refcheckdocs` warning hwtracing: hisi_ptt: Don't try to attach a task hwtracing: hisi_ptt: Handle the interrupt in hardirq context hwtracing: hisi_ptt: Add dummy callback pmu::read() coresight: Fix crash when Perf and sysfs modes are used concurrently coresight: etm4x: Remove bogous __exit annotation for some functions
2023-12-09Merge tag 'loongarch-fixes-6.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Preserve syscall nr across execve(), slightly clean up drdtime(), fix the Clang built zboot kernel, fix a stack unwinder bug and several bpf jit bugs" * tag 'loongarch-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: BPF: Fix unconditional bswap instructions LoongArch: BPF: Fix sign-extension mov instructions LoongArch: BPF: Don't sign extend function return value LoongArch: BPF: Don't sign extend memory load operand LoongArch: Preserve syscall nr across execve() LoongArch: Set unwind stack type to unknown rather than set error flag LoongArch: Slightly clean up drdtime() LoongArch: Apply dynamic relocations for LLD
2023-12-09Merge tag 'mips-fixes_6.7_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - Fixes for broken Loongson firmware - Fix lockdep splat - Fix FPU states when creating kernel threads * tag 'mips-fixes_6.7_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kernel: Clear FPU states when setting up kernel threads MIPS: Loongson64: Handle more memory types passed from firmware MIPS: Loongson64: Enable DMA noncoherent support MIPS: Loongson64: Reserve vgabios memory on boot mips/smp: Call rcutree_report_cpu_starting() earlier
2023-12-09Merge tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "A random set of small bug fixes including: - Fix segfault on AmpereOne due to missing default metricgroup name - Fix segfault on `perf list --json` due to NULL pointer" * tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields perf metrics: Avoid segv if default metricgroup isn't set
2023-12-09Merge tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: "Six smb3 client fixes: - Fixes for copy_file_range and clone (cache invalidation and file size), also addresses an xfstest failure - Fix to return proper error if REMAP_FILE_DEDUP set (also fixes xfstest generic/304) - Fix potential null pointer reference with DFS - Multichannel fix addressing (reverting an earlier patch) some of the problems with enabling/disabling channels dynamically Still working on a followon multichannel fix to address another issue found in reconnect testing that will send next week" * tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: reconnect worker should take reference on server struct unconditionally Revert "cifs: reconnect work should have reference on server struct" cifs: Fix non-availability of dedup breaking generic/304 smb: client: fix potential NULL deref in parse_dfs_referrals() cifs: Fix flushing, invalidation and file size with FICLONE cifs: Fix flushing, invalidation and file size with copy_file_range()
2023-12-09LoongArch: BPF: Fix unconditional bswap instructionsTiezhu Yang
We can see that "bswap32: Takes an unsigned 32-bit number in either big- or little-endian format and returns the equivalent number with the same bit width but opposite endianness" in BPF Instruction Set Specification, so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and BPF_ALU64. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) After: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS Fixes: 4ebf9216e7df ("LoongArch: BPF: Support unconditional bswap instructions") Acked-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: BPF: Fix sign-extension mov instructionsTiezhu Yang
We can see that "Short form of movsx, dst_reg = (s8,s16,s32)src_reg" in include/linux/filter.h, additionally, for BPF_ALU64 the value of the destination register is unchanged whereas for BPF_ALU the upper 32 bits of the destination register are zeroed, so it should clear the upper 32 bits for BPF_ALU. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #81 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #82 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) After: test_bpf: #81 ALU_MOVSX | BPF_B jited:1 6 PASS test_bpf: #82 ALU_MOVSX | BPF_H jited:1 6 PASS By the way, the bpf selftest case "./test_progs -t verifier_movsx" can also be fixed with this patch. Fixes: f48012f16150 ("LoongArch: BPF: Support sign-extension mov instructions") Acked-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: BPF: Don't sign extend function return valueHengqi Chen
The `cls_redirect` test triggers a kernel panic like: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c [ 30.939331] Oops[#1]: [ 30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0 [ 30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10 [ 30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90 [ 30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000 [ 30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000 [ 30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200 [ 30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0 [ 30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0 [ 30.941015] ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590 [ 30.941535] ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.941696] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 30.942224] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 30.942330] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 30.942453] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 30.942764] BADV: fffffffffd814de0 [ 30.942854] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 30.942974] Modules linked in: [ 30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76) [ 30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000 [ 30.943495] 0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200 [ 30.943626] 0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668 [ 30.943785] 0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000 [ 30.943936] 900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70 [ 30.944091] 0000000000000000 0000000000000001 0000000731eeab00 0000000000000000 [ 30.944245] ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8 [ 30.944402] ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000 [ 30.944538] 000000000000005a 900000010504c200 900000010a064000 900000010a067000 [ 30.944697] 9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c [ 30.944852] ... [ 30.944924] Call Trace: [ 30.945120] [<ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8 [ 30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684 [ 30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724 [ 30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c [ 30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94 [ 30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158 [ 30.946492] [ 30.946549] Code: 0015030e 5c0009c0 5001d000 <28c00304> 02c00484 29c00304 00150009 2a42d2e4 0280200d [ 30.946793] [ 30.946971] ---[ end trace 0000000000000000 ]--- [ 32.093225] Kernel panic - not syncing: Fatal exception in interrupt [ 32.093526] Kernel relocated by 0x2320000 [ 32.093630] .text @ 0x9000000002520000 [ 32.093725] .data @ 0x9000000003400000 [ 32.093792] .bss @ 0x9000000004413200 [ 34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- This is because we signed-extend function return values. When subprog mode is enabled, we have: cls_redirect() -> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480 The pointer returned is later signed-extended to 0xfffffffffc00b480 at `BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page fault and a kernel panic. Drop the unnecessary signed-extension on return values like other architectures do. With this change, we have: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. #51/1 cls_redirect/cls_redirect_inlined:OK #51/2 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/3 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/4 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/5 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/6 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/7 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/8 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/9 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/10 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/11 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/12 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/13 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/14 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/15 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/16 cls_redirect/cls_redirect_subprogs:OK #51/17 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/18 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/19 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/20 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/21 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/22 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/23 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/24 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/25 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/26 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/27 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/28 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/29 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/30 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/31 cls_redirect/cls_redirect_dynptr:OK #51/32 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/33 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/34 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/35 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/36 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/37 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/38 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/39 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/40 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/41 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/42 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/43 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/44 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/45 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51 cls_redirect:OK Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: BPF: Don't sign extend memory load operandHengqi Chen
The `cgrp_local_storage` test triggers a kernel panic like: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00 [ 550.931781] Oops[#1]: [ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0 [ 550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558 [ 550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118 [ 550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0 [ 550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020 [ 550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700 [ 550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8 [ 550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050 [ 550.933520] ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200 [ 550.933911] ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.934105] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 550.934596] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 550.934712] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 550.934836] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 550.935097] BADV: 0000000000000080 [ 550.935181] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 550.935291] Modules linked in: [ 550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55) [ 550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001 [ 550.935844] 9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034 [ 550.935990] 0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09 [ 550.936175] 0000000000000001 0000000000000000 9000000108353ec0 0000000000000118 [ 550.936314] 9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000 [ 550.936479] 0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288 [ 550.936635] 00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003 [ 550.936779] 9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c [ 550.936939] 0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0 [ 550.937083] ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558 [ 550.937224] ... [ 550.937299] Call Trace: [ 550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154 [ 550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200 [ 550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94 [ 550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158 [ 550.938477] [ 550.938607] Code: 580009ae 50016000 262402e4 <28c20085> 14092084 03a00084 16000024 03240084 00150006 [ 550.938851] [ 550.939021] ---[ end trace 0000000000000000 ]--- Further investigation shows that this panic is triggered by memory load operations: ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0, BPF_LOCAL_STORAGE_GET_F_CREATE); The expression `task->cgroups->dfl_cgrp` involves two memory load. Since the field offset fits in imm12 or imm14, we use ldd or ldptrd instructions. But both instructions have the side effect that it will signed-extended the imm operand. Finally, we got the wrong addresses and panics is inevitable. Use a generic ldxd instruction to avoid this kind of issues. With this change, we have: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec #48/1 cgrp_local_storage/tp_btf:OK test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL #48/4 cgrp_local_storage/negative:OK #48/5 cgrp_local_storage/cgroup_iter_sleepable:OK test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48/7 cgrp_local_storage/no_rcu_lock:OK #48 cgrp_local_storage:FAIL All error logs: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48 cgrp_local_storage:FAIL Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED No panics any more (The test still failed because lack of BPF trampoline which I am actively working on). Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: Preserve syscall nr across execve()Hengqi Chen
Currently, we store syscall nr in pt_regs::regs[11] and syscall execve() accidentally overrides it during its execution: sys_execve() -> do_execve() -> do_execveat_common() -> bprm_execve() -> exec_binprm() -> search_binary_handler() -> load_elf_binary() -> ELF_PLAT_INIT() ELF_PLAT_INIT() reset regs[11] to 0, so in syscall_exit_to_user_mode() we later get a wrong syscall nr. This breaks tools like execsnoop since it relies on execve() tracepoints. Skip pt_regs::regs[11] reset in ELF_PLAT_INIT() to fix the issue. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: Set unwind stack type to unknown rather than set error flagJinyang He
During unwinding, unwind_done() is used as an end condition. Normally it unwind to the user stack and then set the stack type to unknown, which is a normal exit. When something unexpected happens in unwind process and we cannot unwind anymore, we should set the error flag, and also set the stack type to unknown to indicate that the unwind process can not continue. The error flag emphasizes that the unwind process produce an unexpected error. There is no unexpected things when we unwind the PT_REGS in the top of IRQ stack and find out that is an user mode PT_REGS. Thus, we should not set error flag and just set stack type to unknown. Reported-by: Hengqi Chen <hengqi.chen@gmail.com> Acked-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: Slightly clean up drdtime()Xi Ruoyao
As we are just discarding the stable clock ID, simply write it into $zero instead of allocating a temporary register. Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: Apply dynamic relocations for LLDWANG Rui
For the following assembly code: .text .global func func: nop .data var: .dword func When linked with `-pie`, GNU LD populates the `var` variable with the pre-relocated value of `func`. However, LLVM LLD does not exhibit the same behavior. This issue also arises with the `kernel_entry` in arch/ loongarch/kernel/head.S: _head: .word MZ_MAGIC /* "MZ", MS-DOS header */ .org 0x8 .dword kernel_entry /* Kernel entry point */ The correct kernel entry from the MS-DOS header is crucial for jumping to vmlinux from zboot. This necessity is why the compressed relocatable kernel compiled by Clang encounters difficulties in booting. To address this problem, it is proposed to apply dynamic relocations to place with `--apply-dynamic-relocs`. Link: https://github.com/ClangBuiltLinux/linux/issues/1962 Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-08Merge branch 'bnxt_en-misc-fixes'Jakub Kicinski
Michael Chan says: ==================== bnxt_en: Misc. fixes 4 miscellaneous driver fixes covering PM resume, SKB recycling, wrong return value check, and PTP HWTSTAMP_FILTER_ALL. ==================== Link: https://lore.kernel.org/r/20231208001658.14230-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logicMichael Chan
When the chip is configured to timestamp all receive packets, the timestamp in the RX completion is only valid if the metadata present flag is not set for packets received on the wire. In addition, internal loopback packets will never have a valid timestamp and the timestamp field will always be zero. We must exclude any 0 value in the timestamp field because there is no way to determine if it is a loopback packet or not. Add a new function bnxt_rx_ts_valid() to check for all timestamp valid conditions. Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08bnxt_en: Fix wrong return value check in bnxt_close_nic()Kalesh AP
The wait_event_interruptible_timeout() function returns 0 if the timeout elapsed, -ERESTARTSYS if it was interrupted by a signal, and the remaining jiffies otherwise if the condition evaluated to true before the timeout elapsed. Driver should have checked for zero return value instead of a positive value. MChan: Print a warning for -ERESTARTSYS. The close operation will proceed anyway when wait_event_interruptible_timeout() returns for any reason. Since we do the close no matter what, we should not return this error code to the caller. Change bnxt_close_nic() to a void function and remove all error handling from some of the callers. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08bnxt_en: Fix skb recycling logic in bnxt_deliver_skb()Sreekanth Reddy
Receive SKBs can go through the VF-rep path or the normal path. skb_mark_for_recycle() is only called for the normal path. Fix it to do it for both paths to fix possible stalled page pool shutdown errors. Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08bnxt_en: Clear resource reservation during resumeSomnath Kotur
We are issuing HWRM_FUNC_RESET cmd to reset the device including all reserved resources, but not clearing the reservations within the driver struct. As a result, when the driver re-initializes as part of resume, it believes that there is no need to do any resource reservation and goes ahead and tries to allocate rings which will eventually fail beyond a certain number pre-reserved by the firmware. Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08tcp: fix tcp_disordered_ack() vs usec TS resolutionEric Dumazet
After commit 939463016b7a ("tcp: change data receiver flowlabel after one dup") we noticed an increase of TCPACKSkippedPAWS events. Neal Cardwell tracked the issue to tcp_disordered_ack() assumption about remote peer TS clock. RFC 1323 & 7323 are suggesting the following: "timestamp clock frequency in the range 1 ms to 1 sec per tick between 1ms and 1sec." This has to be adjusted for 1 MHz clock frequency. This hints at reorders of SACK packets on send side, this might deserve a future patch. (skb->ooo_okay is always set for pure ACK packets) Fixes: 614e8316aa4c ("tcp: add support for usec resolution in TCP TS values") Co-developed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Morley <morleyd@google.com> Link: https://lore.kernel.org/r/20231207181342.525181-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08MAINTAINERS: remove myself as maintainer of SMCKarsten Graul
I changed responsibilities some time ago, its time to remove myself as maintainer of the SMC component. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/20231207202358.53502-1-wenjia@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08Merge branch 'qca_spi-collection-of-major-fixes'Jakub Kicinski
Stefan Wahren says: ==================== qca_spi: collection of major fixes This series contains a collection of major fixes for the qca_spi driver, which has been recently discovered. ==================== Link: https://lore.kernel.org/r/20231206141222.52029-1-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 16:09:23 +0000