summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-16erofs: clean up parsing of fscache related optionsJingbo Xu
... to avoid the mess of conditional preprocessing as we are continually adding fscache related mount options. Reviewd-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com> Link: https://lore.kernel.org/r/20230112065431.124926-3-jefflexu@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-01-16erofs: add documentation for 'domain_id' mount optionJingbo Xu
Since the EROFS share domain feature for fscache mode has been available since Linux v6.1, let's add documentation for 'domain_id' mount option. Cc: linux-doc@vger.kernel.org Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com> Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20230112065431.124926-2-jefflexu@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-01-16arm64: efi: Account for the EFI runtime stack in stack unwinderArd Biesheuvel
The EFI runtime services run from a dedicated stack now, and so the stack unwinder needs to be informed about this. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-01-16arm64: efi: Avoid workqueue to check whether EFI runtime is liveArd Biesheuvel
Comparing current_work() against efi_rts_work.work is sufficient to decide whether current is currently running EFI runtime services code at any level in its call stack. However, there are other potential users of the EFI runtime stack, such as the ACPI subsystem, which may invoke efi_call_virt_pointer() directly, and so any sync exceptions occurring in firmware during those calls are currently misidentified. So instead, let's check whether the stashed value of the thread stack pointer points into current's thread stack. This can only be the case if current was interrupted while running EFI runtime code. Note that this implies that we should clear the stashed value after switching back, to avoid false positives. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-01-16octeontx2-pf: Avoid use of GFP_KERNEL in atomic contextGeetha sowjanya
Using GFP_KERNEL in preemption disable context, causing below warning when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. [ 32.542271] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 [ 32.550883] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 [ 32.558707] preempt_count: 1, expected: 0 [ 32.562710] RCU nest depth: 0, expected: 0 [ 32.566800] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc2-00269-gae9dcb91c606 #7 [ 32.576188] Hardware name: Marvell CN106XX board (DT) [ 32.581232] Call trace: [ 32.583670] dump_backtrace.part.0+0xe0/0xf0 [ 32.587937] show_stack+0x18/0x30 [ 32.591245] dump_stack_lvl+0x68/0x84 [ 32.594900] dump_stack+0x18/0x34 [ 32.598206] __might_resched+0x12c/0x160 [ 32.602122] __might_sleep+0x48/0xa0 [ 32.605689] __kmem_cache_alloc_node+0x2b8/0x2e0 [ 32.610301] __kmalloc+0x58/0x190 [ 32.613610] otx2_sq_aura_pool_init+0x1a8/0x314 [ 32.618134] otx2_open+0x1d4/0x9d0 To avoid use of GFP_ATOMIC for memory allocation, disable preemption after all memory allocation is done. Fixes: 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16Merge branch 'l2tp-races'David S. Miller
Cong Wang says: ==================== l2tp: fix race conditions in l2tp_tunnel_register() This patchset contains two patches, the first one is a preparation for the second one which is the actual fix. Please find more details in each patch description. I have ran the l2tp test (https://github.com/katalix/l2tp-ktest), all test cases are passed. v3: preserve EEXIST errno for user-space v2: move IDR allocation to l2tp_tunnel_register() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16l2tp: close all race conditions in l2tp_tunnel_register()Cong Wang
The code in l2tp_tunnel_register() is racy in several ways: 1. It modifies the tunnel socket _after_ publishing it. 2. It calls setup_udp_tunnel_sock() on an existing socket without locking. 3. It changes sock lock class on fly, which triggers many syzbot reports. This patch amends all of them by moving socket initialization code before publishing and under sock lock. As suggested by Jakub, the l2tp lockdep class is not necessary as we can just switch to bh_lock_sock_nested(). Fixes: 37159ef2c1ae ("l2tp: fix a lockdep splat") Fixes: 6b9f34239b00 ("l2tp: fix races in tunnel creation") Reported-by: syzbot+52866e24647f9a23403f@syzkaller.appspotmail.com Reported-by: syzbot+94cc2a66fc228b23f360@syzkaller.appspotmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Guillaume Nault <gnault@redhat.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Tom Parkin <tparkin@katalix.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16l2tp: convert l2tp_tunnel_list to idrCong Wang
l2tp uses l2tp_tunnel_list to track all registered tunnels and to allocate tunnel ID's. IDR can do the same job. More importantly, with IDR we can hold the ID before a successful registration so that we don't need to worry about late error handling, it is not easy to rollback socket changes. This is a preparation for the following fix. Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Guillaume Nault <gnault@redhat.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Tom Parkin <tparkin@katalix.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16net/sched: sch_taprio: fix possible use-after-freeEric Dumazet
syzbot reported a nasty crash [1] in net_tx_action() which made little sense until we got a repro. This repro installs a taprio qdisc, but providing an invalid TCA_RATE attribute. qdisc_create() has to destroy the just initialized taprio qdisc, and taprio_destroy() is called. However, the hrtimer used by taprio had already fired, therefore advance_sched() called __netif_schedule(). Then net_tx_action was trying to use a destroyed qdisc. We can not undo the __netif_schedule(), so we must wait until one cpu serviced the qdisc before we can proceed. Many thanks to Alexander Potapenko for his help. [1] BUG: KMSAN: uninit-value in queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline] BUG: KMSAN: uninit-value in do_raw_spin_trylock include/linux/spinlock.h:191 [inline] BUG: KMSAN: uninit-value in __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline] BUG: KMSAN: uninit-value in _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138 queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline] do_raw_spin_trylock include/linux/spinlock.h:191 [inline] __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline] _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138 spin_trylock include/linux/spinlock.h:359 [inline] qdisc_run_begin include/net/sch_generic.h:187 [inline] qdisc_run+0xee/0x540 include/net/pkt_sched.h:125 net_tx_action+0x77c/0x9a0 net/core/dev.c:5086 __do_softirq+0x1cc/0x7fb kernel/softirq.c:571 run_ksoftirqd+0x2c/0x50 kernel/softirq.c:934 smpboot_thread_fn+0x554/0x9f0 kernel/smpboot.c:164 kthread+0x31b/0x430 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 Uninit was created at: slab_post_alloc_hook mm/slab.h:732 [inline] slab_alloc_node mm/slub.c:3258 [inline] __kmalloc_node_track_caller+0x814/0x1250 mm/slub.c:4970 kmalloc_reserve net/core/skbuff.c:358 [inline] __alloc_skb+0x346/0xcf0 net/core/skbuff.c:430 alloc_skb include/linux/skbuff.h:1257 [inline] nlmsg_new include/net/netlink.h:953 [inline] netlink_ack+0x5f3/0x12b0 net/netlink/af_netlink.c:2436 netlink_rcv_skb+0x55d/0x6c0 net/netlink/af_netlink.c:2507 rtnetlink_rcv+0x30/0x40 net/core/rtnetlink.c:6108 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xabc/0xe90 net/socket.c:2482 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2536 __sys_sendmsg net/socket.c:2565 [inline] __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022 Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller
Pable Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Increase timeout to 120 seconds for netfilter selftests to fix nftables transaction tests, from Florian Westphal. 2) Fix overflow in bitmap_ip_create() due to integer arithmetics in a 64-bit bitmask, from Gavrilov Ilia. 3) Fix incorrect arithmetics in nft_payload with double-tagged vlan matching. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16net: stmmac: Fix queue statistics readingKurt Kanzenbach
Correct queue statistics reading. All queue statistics are stored as unsigned long values. The retrieval for ethtool fetches these values as u64. However, on some systems the size of the counters are 32 bit. That yields wrong queue statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by using the correct data type. Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short period of time: Non-patched kernel: |root@st1:~# ethtool -S eth0 | grep q0 | q0_tx_pkt_n: 3775276254951 # ??? | q0_tx_irq_n: 879 | q0_rx_pkt_n: 1194000908909 # ??? | q0_rx_irq_n: 278 Patched kernel: |root@st1:~# ethtool -S eth0 | grep q0 | q0_tx_pkt_n: 2434 | q0_tx_irq_n: 1274 | q0_rx_pkt_n: 1604 | q0_rx_irq_n: 846 Fixes: 68e9c5dee1cf ("net: stmmac: add ethtool per-queue statistic framework") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16pinctrl: rockchip: fix reading pull type on rk3568Jonas Karlman
When reading pinconf-pins from debugfs it fails to get the configured pull type on RK3568, "unsupported pinctrl type" error messages is also reported. Fix this by adding support for RK3568 in rockchip_get_pull, including a reverse of the pull-up value swap applied in rockchip_set_pull so that pull-up is correctly reported in pinconf-pins. Also update the workaround comment to reflect affected pins, GPIO0_D3-D6. Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20230110172955.1258840-1-jonas@kwiboo.se Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-16wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oidSzymon Heidrich
Since resplen and respoffs are signed integers sufficiently large values of unsigned int len and offset members of RNDIS response will result in negative values of prior variables. This may be utilized to bypass implemented security checks to either extract memory contents by manipulating offset or overflow the data buffer via memcpy by manipulating both offset and len. Additionally assure that sum of resplen and respoffs does not overflow so buffer boundaries are kept. Fixes: 80f8c5b434f9 ("rndis_wlan: copy only useful data from rndis_command respond") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111175031.7049-1-szymon.heidrich@gmail.com
2023-01-16wifi: brcmfmac: fix regression for Broadcom PCIe wifi devicesArend van Spriel
A sanity check was introduced considering maximum flowrings above 256 as insane and effectively aborting the device probe. This resulted in regression for number of users as the value turns out to be sane after all. Fixes: 2aca4f3734bd ("brcmfmac: return error when getting invalid max_flowrings from dongle") Reported-by: chainofflowers <chainofflowers@posteo.net> Link: https://lore.kernel.org/all/4781984.GXAFRqVoOG@luna/ Reported-by: Christian Marillat <marillat@debian.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216894 Cc: stable@vger.kernel.org Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111112419.24185-1-arend.vanspriel@broadcom.com
2023-01-16wifi: brcmfmac: avoid NULL-deref in survey dump for 2G only deviceArend van Spriel
When dealing with a device for 2GHz band only the wiphy->bands for 5GHz will be NULL. This would result in a NULL-deref in the brcmf_cfg80211_dump_survey() function. Rework the code with a for-loop to make it easier to add another band. Fixes: 6c04deae1438 ("brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelection") Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230103124117.271988-3-arend.vanspriel@broadcom.com
2023-01-16wifi: brcmfmac: avoid handling disabled channels for survey dumpArend van Spriel
An issue was reported in which periodically error messages are printed in the kernel log: [ 26.303445] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 26.303554] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2 [ 26.516752] brcmfmac_wcc: brcmf_wcc_attach: executing [ 26.528264] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 27.076829] Bluetooth: hci0: BCM: features 0x2f [ 27.078592] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+ [ 27.078601] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0342 [ 30.142104] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS [ 30.590017] Bluetooth: MGMT ver 1.22 [ 104.897615] brcmfmac: cfg80211_set_channel: set chanspec 0x100e fail, reason -52 [ 104.897992] brcmfmac: cfg80211_set_channel: set chanspec 0xd022 fail, reason -52 [ 105.007672] brcmfmac: cfg80211_set_channel: set chanspec 0xd026 fail, reason -52 [ 105.117654] brcmfmac: cfg80211_set_channel: set chanspec 0xd02a fail, reason -52 [ 105.227636] brcmfmac: cfg80211_set_channel: set chanspec 0xd02e fail, reason -52 [ 106.987552] brcmfmac: cfg80211_set_channel: set chanspec 0xd090 fail, reason -52 [ 106.987911] brcmfmac: cfg80211_set_channel: set chanspec 0xd095 fail, reason -52 [ 106.988233] brcmfmac: cfg80211_set_channel: set chanspec 0xd099 fail, reason -52 [ 106.988565] brcmfmac: cfg80211_set_channel: set chanspec 0xd09d fail, reason -52 [ 106.988909] brcmfmac: cfg80211_set_channel: set chanspec 0xd0a1 fail, reason -52 This happens in brcmf_cfg80211_dump_survey() because we try a disabled channel. When channel is marked as disabled we do not need to fill any other info so bail out. Fixes: 6c04deae1438 ("brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelection") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230103124117.271988-2-arend.vanspriel@broadcom.com
2023-01-16scripts: support GNU make 4.4 in jobserver-execMartin Liska
Starting with GNU make 4.4, --jobserver-auth newly uses named pipe (fifo) instead of part of opened file descriptors: https://www.gnu.org/software/make/manual/html_node/POSIX-Jobserver.html Support also the new format. Signed-off-by: Martin Liska <mliska@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-16Merge tag 'riscv-dt-fixes-for-v6.2-rc4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V DeviceTrees for v6.2 SiFive: A solitary fix for the PCI memory regions on the unmatched, triggered by an SM768. No-one must have tried one until just recently! Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-fixes-for-v6.2-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: sifive: fu740: fix size of pcie 32bit memory Link: https://lore.kernel.org/r/Y78rn+0fVNOxHLKt@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16Merge tag 'mvebu-fixes-6.2-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 6.2 (part 1) Fix regression for gpio support on Armada 38x and Armada 38x Fix address for UART1 on AC5/AC5X * tag 'mvebu-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: AC5/AC5X: Fix address for UART1 Revert "ARM: dts: armada-39x: Fix compatible string for gpios" Revert "ARM: dts: armada-38x: Fix compatible string for gpios" Link: https://lore.kernel.org/r/87mt6mg08k.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16gpio: mxc: Always set GPIOs used as interrupt source to INPUT modeMarek Vasut
Always configure GPIO pins which are used as interrupt source as INPUTs. In case the default pin configuration is OUTPUT, or the prior stage does configure the pins as OUTPUT, then Linux will not reconfigure the pin as INPUT and no interrupts are received. Always configure the interrupt source GPIO pin as input to fix the above case. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-16gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlockMarek Vasut
The driver currently performs register read-modify-write without locking in its irqchip part, this could lead to a race condition when configuring interrupt mode setting. Add the missing bgpio spinlock lock/unlock around the register read-modify-write. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-16x86/aperfmperf: Erase stale arch_freq_scale values when disabling frequency ↵Yair Podemsky
invariance readings Once disable_freq_invariance_work is called the scale_freq_tick function will not compute or update the arch_freq_scale values. However the scheduler will still read these values and use them. The result is that the scheduler might perform unfair decisions based on stale values. This patch adds the step of setting the arch_freq_scale values for all cpus to the default (max) value SCHED_CAPACITY_SCALE, Once all cpus have the same arch_freq_scale value the scaling is meaningless. Signed-off-by: Yair Podemsky <ypodemsk@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230110160206.75912-1-ypodemsk@redhat.com
2023-01-16sched/core: Fix NULL pointer access fault in sched_setaffinity() with ↵Waiman Long
non-SMP configs The kernel commit 9a5418bc48ba ("sched/core: Use kfree_rcu() in do_set_cpus_allowed()") introduces a bug for kernels built with non-SMP configs. Calling sched_setaffinity() on such a uniprocessor kernel will cause cpumask_copy() to be called with a NULL pointer leading to general protection fault. This is not really a problem in real use cases as there aren't that many uniprocessor kernel configs in use and calling sched_setaffinity() on such a uniprocessor system doesn't make sense. Fix this problem by making sure cpumask_copy() will not be called in such a case. Fixes: 9a5418bc48ba ("sched/core: Use kfree_rcu() in do_set_cpus_allowed()") Reported-by: kernel test robot <yujie.liu@intel.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230115193122.563036-1-longman@redhat.com
2023-01-16USB: serial: option: add Quectel EM05CN modemDuke Xin(辛安文)
The EM05CN modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05CN (SG) modemDuke Xin(辛安文)
The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: cp210x: add SCALANCE LPE-9000 device idMichael Adler
Add the USB serial console device ID for Siemens SCALANCE LPE-9000 which have a USB port for their serial console. Signed-off-by: Michael Adler <michael.adler@siemens.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EC200U modemAli Mirghasemi
Add support for EC200U modem 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS usb-device output: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0901 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Ali Mirghasemi <ali.mirghasemi1376@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05-G (RS) modemDuke Xin(辛安文)
The EM05-G (RS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-15block, bfq: switch 'bfqg->ref' to use atomic refcount apisYu Kuai
The updating of 'bfqg->ref' should be protected by 'bfqd->lock', however, during code review, we found that bfq_pd_free() update 'bfqg->ref' without holding the lock, which is problematic: 1) bfq_pd_free() triggered by removing cgroup is called asynchronously; 2) bfqq will grab bfqg reference, and exit bfqq will drop the reference, which can concurrent with 1). Unfortunately, 'bfqd->lock' can't be held here because 'bfqd' might already be freed in bfq_pd_free(). Fix the problem by using atomic refcount apis. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230103084755.1256479-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-16rust: print: avoid evaluating arguments in `pr_*` macros in `unsafe` blocksMiguel Ojeda
At the moment it is possible to perform unsafe operations in the arguments of `pr_*` macros since they are evaluated inside an `unsafe` block: let x = &10u32 as *const u32; pr_info!("{}", *x); In other words, this is a soundness issue. Fix it so that it requires an explicit `unsafe` block. Reported-by: Wedson Almeida Filho <wedsonaf@gmail.com> Reported-by: Domen Puncer Kugler <domen.puncerkugler@nccgroup.com> Link: https://github.com/Rust-for-Linux/linux/issues/479 Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
2023-01-16zonefs: Detect append writes at invalid locationsDamien Le Moal
Using REQ_OP_ZONE_APPEND operations for synchronous writes to sequential files succeeds regardless of the zone write pointer position, as long as the target zone is not full. This means that if an external (buggy) application writes to the zone of a sequential file underneath the file system, subsequent file write() operation will succeed but the file size will not be correct and the file will contain invalid data written by another application. Modify zonefs_file_dio_append() to check the written sector of an append write (returned in bio->bi_iter.bi_sector) and return -EIO if there is a mismatch with the file zone wp offset field. This change triggers a call to zonefs_io_error() and a zone check. Modify zonefs_io_error_cb() to not expose the unexpected data after the current inode size when the errors=remount-ro mode is used. Other error modes are correctly handled already. Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
2023-01-15Linux 6.2-rc4v6.2-rc4Linus Torvalds
2023-01-15Merge tag 'x86_urgent_for_v6.2_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Make sure the poking PGD is pinned for Xen PV as it requires it this way - Fixes for two resctrl races when moving a task or creating a new monitoring group - Fix SEV-SNP guests running under HyperV where MTRRs are disabled to not return a UC- type mapping type on memremap() and thus cause a serious slowdown - Fix insn mnemonics in bioscall.S now that binutils is starting to fix confusing insn suffixes * tag 'x86_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: fix poking_init() for Xen PV guests x86/resctrl: Fix event counts regression in reused RMIDs x86/resctrl: Fix task CLOSID/RMID update race x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case x86/boot: Avoid using Intel mnemonics in AT&T syntax asm
2023-01-15Merge tag 'edac_urgent_for_v6.2_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: - Fix the EDAC device's confusion in the polling setting units - Fix a memory leak in highbank's probing function * tag 'edac_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/highbank: Fix memory leak in highbank_mc_probe() EDAC/device: Fix period calculation in edac_device_reset_delay_period()
2023-01-15Merge tag 'powerpc-6.2-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a build failure with some versions of ld that have an odd version string - Fix incorrect use of mutex in the IMC PMU driver Thanks to Kajol Jain, Michael Petlan, Ojaswin Mujoo, Peter Zijlstra, and Yang Yingliang. * tag 'powerpc-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/hash: Make stress_hpt_timer_fn() static powerpc/imc-pmu: Fix use of mutex in IRQs disabled section powerpc/boot: Fix incorrect version calculation issue in ld_version
2023-01-14Merge tag 'iommu-fixes-v6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Core: Fix an iommu-group refcount leak - Fix overflow issue in IOVA alloc path - ARM-SMMU fixes from Will: - Fix VFIO regression on NXP SoCs by reporting IOMMU_CAP_CACHE_COHERENCY - Fix SMMU shutdown paths to avoid device unregistration race - Error handling fix for Mediatek IOMMU driver * tag 'iommu-fixes-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe() iommu/iova: Fix alloc iova overflows issue iommu: Fix refcount leak in iommu_device_claim_dma_owner iommu/arm-smmu-v3: Don't unregister on shutdown iommu/arm-smmu: Don't unregister on shutdown iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
2023-01-14Merge tag 'fixes-2023-01-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fix from Mike Rapoport: "memblock: always release pages to the buddy allocator in memblock_free_late() If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages() only releases pages to the buddy allocator if they are not in the deferred range. This is correct for free pages (as defined by for_each_free_mem_pfn_range_in_zone()) because free pages in the deferred range will be initialized and released as part of the deferred init process. memblock_free_pages() is called by memblock_free_late(), which is used to free reserved ranges after memblock_free_all() has run. All pages in reserved ranges have been initialized at that point, and accordingly, those pages are not touched by the deferred init process. This means that currently, if the pages that memblock_free_late() intends to release are in the deferred range, they will never be released to the buddy allocator. They will forever be reserved. In addition, memblock_free_pages() calls kmsan_memblock_free_pages(), which is also correct for free pages but is not correct for reserved pages. KMSAN metadata for reserved pages is initialized by kmsan_init_shadow(), which runs shortly before memblock_free_all(). For both of these reasons, memblock_free_pages() should only be called for free pages, and memblock_free_late() should call __free_pages_core() directly instead. One case where this issue can occur in the wild is EFI boot on x86_64. The x86 EFI code reserves all EFI boot services memory ranges via memblock_reserve() and frees them later via memblock_free_late() (efi_reserve_boot_services() and efi_free_boot_services(), respectively). If any of those ranges happens to fall within the deferred init range, the pages will not be released and that memory will be unavailable. For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI: v6.2-rc2: Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 178867 v6.2-rc2 + patch: Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 222816 # +43,949 pages" * tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: mm: Always release pages to the buddy allocator in memblock_free_late().
2023-01-14Merge tag 'hardening-v6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening fixes from Kees Cook: - Fix CFI hash randomization with KASAN (Sami Tolvanen) - Check size of coreboot table entry and use flex-array * tag 'hardening-v6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: Fix CFI hash randomization with KASAN firmware: coreboot: Check size of table entry and use flex-array
2023-01-14Merge tag 'modules-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module fix from Luis Chamberlain: "Just one fix for modules by Nick" * tag 'modules-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: kallsyms: Fix scheduling with interrupts disabled in self-test
2023-01-14Merge tag '6.2-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: - memory leak and double free fix - two symlink fixes - minor cleanup fix - two smb1 fixes * tag '6.2-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix uninitialized memory read for smb311 posix symlink create cifs: fix potential memory leaks in session setup cifs: do not query ifaces on smb1 mounts cifs: fix double free on failed kerberos auth cifs: remove redundant assignment to the variable match cifs: fix file info setting in cifs_open_file() cifs: fix file info setting in cifs_query_path_info()
2023-01-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor fixes in the hisi_sas driver which only impact enterprise style multi-expander and shared disk situations and no core changes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id scsi: hisi_sas: Use abort task set to reset SAS disks when discovered
2023-01-14Merge tag 'ata-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fix from Damien Le Moal: "A single fix to prevent building the pata_cs5535 driver with user mode linux as it uses msr operations that are not defined with UML" * tag 'ata-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_cs5535: Don't build on UML
2023-01-13sch_htb: Avoid grafting on htb_destroy_class_offload when destroying htbRahul Rameshbabu
Peek at old qdisc and graft only when deleting a leaf class in the htb, rather than when deleting the htb itself. Do not peek at the qdisc of the netdev queue when destroying the htb. The caller may already have grafted a new qdisc that is not part of the htb structure being destroyed. This fix resolves two use cases. 1. Using tc to destroy the htb. - Netdev was being prematurely activated before the htb was fully destroyed. 2. Using tc to replace the htb with another qdisc (which also leads to the htb being destroyed). - Premature netdev activation like previous case. Newly grafted qdisc was also getting accidentally overwritten when destroying the htb. Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230113005528.302625-1-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13Merge branch 'mptcp-userspace-pm-create-sockets-for-the-right-family'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: userspace pm: create sockets for the right family Before these patches, the Userspace Path Manager would allow the creation of subflows with wrong families: taking the one of the MPTCP socket instead of the provided ones and resulting in the creation of subflows with likely not the right source and/or destination IPs. It would also allow the creation of subflows between different families or not respecting v4/v6-only socket attributes. Patch 1 lets the userspace PM select the proper family to avoid creating subflows with the wrong source and/or destination addresses because the family is not the expected one. Patch 2 makes sure the userspace PM doesn't allow the userspace to create subflows for a family that is not allowed. Patch 3 validates scenarios with a mix of v4 and v6 subflows for the same MPTCP connection. These patches fix issues introduced in v5.19 when the userspace path manager has been introduced. ==================== Link: https://lore.kernel.org/r/20230112-upstream-net-20230112-netlink-v4-v6-v1-0-6a8363a221d2@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13selftests: mptcp: userspace: validate v4-v6 subflows mixMatthieu Baerts
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux, it is possible to have that if the MPTCP socket has been created with AF_INET6 family without the IPV6_V6ONLY option. Here, a new IPv4 subflow is being added to the initial IPv6 connection, then being removed using Netlink commands. Cc: stable@vger.kernel.org # v5.19+ Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13mptcp: netlink: respect v4/v6-only socketsMatthieu Baerts
If an MPTCP socket has been created with AF_INET6 and the IPV6_V6ONLY option has been set, the userspace PM would allow creating subflows using IPv4 addresses, e.g. mapped in v6. The kernel side of userspace PM will also accept creating subflows with local and remote addresses having different families. Depending on the subflow socket's family, different behaviours are expected: - If AF_INET is forced with a v6 address, the kernel will take the last byte of the IP and try to connect to that: a new subflow is created but to a non expected address. - If AF_INET6 is forced with a v4 address, the kernel will try to connect to a v4 address (v4-mapped-v6). A -EBADF error from the connect() part is then expected. It is then required to check the given families can be accepted. This is done by using a new helper for addresses family matching, taking care of IPv4 vs IPv4-mapped-IPv6 addresses. This helper will be re-used later by the in-kernel path-manager to use mixed IPv4 and IPv6 addresses. While at it, a clear error message is now reported if there are some conflicts with the families that have been passed by the userspace. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13mptcp: explicitly specify sock family at subflow creation timePaolo Abeni
Let the caller specify the to-be-created subflow family. For a given MPTCP socket created with the AF_INET6 family, the current userspace PM can already ask the kernel to create subflows in v4 and v6. If "plain" IPv4 addresses are passed to the kernel, they are automatically mapped in v6 addresses "by accident". This can be problematic because the userspace will need to pass different addresses, now the v4-mapped-v6 addresses to destroy this new subflow. On the other hand, if the MPTCP socket has been created with the AF_INET family, the command to create a subflow in v6 will be accepted but the result will not be the one as expected as new subflow will be created in IPv4 using part of the v6 addresses passed to the kernel: not creating the expected subflow then. No functional change intended for the in-kernel PM where an explicit enforcement is currently in place. This arbitrary enforcement will be leveraged by other patches in a future version. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: stable@vger.kernel.org Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13net: lan966x: add missing fwnode_handle_put() for ports nodeClément Léger
Since the "ethernet-ports" node is retrieved using device_get_named_child_node(), it should be release after using it. Add missing fwnode_handle_put() and move the code that retrieved the node from device-tree to avoid complicated handling in case of error. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13net: enetc: avoid deadlock in enetc_tx_onestep_tstamp()Vladimir Oltean
This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running. Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13net: wan: Add checks for NULL for utdm in undo_uhdlc_init and unmap_si_regsEsina Ekaterina
If uhdlc_priv_tsa != 1 then utdm is not initialized. And if ret != NULL then goto undo_uhdlc_init, where utdm is dereferenced. Same if dev == NULL. Found by Astra Linux on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8d68100ab4ad ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm") Signed-off-by: Esina Ekaterina <eesina@astralinux.ru> Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 17:59:00 +0000