summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-18Merge branch 'fix-race-conditions-in-ndo_get_stats64'Jakub Kicinski
Shinas Rasheed says: ==================== Fix race conditions in ndo_get_stats64 Fix race conditions in ndo_get_stats64 by storing tx/rx stats locally and not availing per queue resources which could be torn down during interface stop. Also remove stats fetch from firmware which is currently unnecessary ==================== Link: https://patch.msgid.link/20250117094653.2588578-1-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep_vf: update tx/rx stats locally for persistenceShinas Rasheed
Update tx/rx stats locally, so that ndo_get_stats64() can use that and not rely on per queue resources to obtain statistics. The latter used to cause race conditions when the device stopped. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-5-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep_vf: remove firmware stats fetch in ndo_get_stats64Shinas Rasheed
The firmware stats fetch call that happens in ndo_get_stats64() is currently not required, and causes a warning to issue. The corresponding warn log for the PF is given below: [ 123.316837] ------------[ cut here ]------------ [ 123.316840] Voluntary context switch within RCU read-side critical section! [ 123.316917] pc : rcu_note_context_switch+0x2e4/0x300 [ 123.316919] lr : rcu_note_context_switch+0x2e4/0x300 [ 123.316947] Call trace: [ 123.316949] rcu_note_context_switch+0x2e4/0x300 [ 123.316952] __schedule+0x84/0x584 [ 123.316955] schedule+0x38/0x90 [ 123.316956] schedule_timeout+0xa0/0x1d4 [ 123.316959] octep_send_mbox_req+0x190/0x230 [octeon_ep] [ 123.316966] octep_ctrl_net_get_if_stats+0x78/0x100 [octeon_ep] [ 123.316970] octep_get_stats64+0xd4/0xf0 [octeon_ep] [ 123.316975] dev_get_stats+0x4c/0x114 [ 123.316977] dev_seq_printf_stats+0x3c/0x11c [ 123.316980] dev_seq_show+0x1c/0x40 [ 123.316982] seq_read_iter+0x3cc/0x4e0 [ 123.316985] seq_read+0xc8/0x110 [ 123.316987] proc_reg_read+0x9c/0xec [ 123.316990] vfs_read+0xc8/0x2ec [ 123.316993] ksys_read+0x70/0x100 [ 123.316995] __arm64_sys_read+0x20/0x30 [ 123.316997] invoke_syscall.constprop.0+0x7c/0xd0 [ 123.317000] do_el0_svc+0xb4/0xd0 [ 123.317002] el0_svc+0xe8/0x1f4 [ 123.317005] el0t_64_sync_handler+0x134/0x150 [ 123.317006] el0t_64_sync+0x17c/0x180 [ 123.317008] ---[ end trace 63399811432ab69b ]--- Fixes: c3fad23cdc06 ("octeon_ep_vf: add support for ndo ops") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-4-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep: update tx/rx stats locally for persistenceShinas Rasheed
Update tx/rx stats locally, so that ndo_get_stats64() can use that and not rely on per queue resources to obtain statistics. The latter used to cause race conditions when the device stopped. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-3-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep: remove firmware stats fetch in ndo_get_stats64Shinas Rasheed
The firmware stats fetch call that happens in ndo_get_stats64() is currently not required, and causes a warning to issue. The warn log is given below: [ 123.316837] ------------[ cut here ]------------ [ 123.316840] Voluntary context switch within RCU read-side critical section! [ 123.316917] pc : rcu_note_context_switch+0x2e4/0x300 [ 123.316919] lr : rcu_note_context_switch+0x2e4/0x300 [ 123.316947] Call trace: [ 123.316949] rcu_note_context_switch+0x2e4/0x300 [ 123.316952] __schedule+0x84/0x584 [ 123.316955] schedule+0x38/0x90 [ 123.316956] schedule_timeout+0xa0/0x1d4 [ 123.316959] octep_send_mbox_req+0x190/0x230 [octeon_ep] [ 123.316966] octep_ctrl_net_get_if_stats+0x78/0x100 [octeon_ep] [ 123.316970] octep_get_stats64+0xd4/0xf0 [octeon_ep] [ 123.316975] dev_get_stats+0x4c/0x114 [ 123.316977] dev_seq_printf_stats+0x3c/0x11c [ 123.316980] dev_seq_show+0x1c/0x40 [ 123.316982] seq_read_iter+0x3cc/0x4e0 [ 123.316985] seq_read+0xc8/0x110 [ 123.316987] proc_reg_read+0x9c/0xec [ 123.316990] vfs_read+0xc8/0x2ec [ 123.316993] ksys_read+0x70/0x100 [ 123.316995] __arm64_sys_read+0x20/0x30 [ 123.316997] invoke_syscall.constprop.0+0x7c/0xd0 [ 123.317000] do_el0_svc+0xb4/0xd0 [ 123.317002] el0_svc+0xe8/0x1f4 [ 123.317005] el0t_64_sync_handler+0x134/0x150 [ 123.317006] el0t_64_sync+0x17c/0x180 [ 123.317008] ---[ end trace 63399811432ab69b ]--- Fixes: 6a610a46bad1 ("octeon_ep: add support for ndo ops") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-2-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net/mlxfw: Drop hard coded max FW flash image sizeMaher Sanalla
Currently, mlxfw kernel module limits FW flash image size to be 10MB at most, preventing the ability to burn recent BlueField-3 FW that exceeds the said size limit. Thus, drop the hard coded limit. Instead, rely on FW's max_component_size threshold that is reported in MCQI register as the size limit for FW image. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1737030796-1441634-1-git-send-email-moshe@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: let net.core.dev_weight always be non-zeroLiu Jian
The following problem was encountered during stability test: (NULL net_device): NAPI poll function process_backlog+0x0/0x530 \ returned 1, exceeding its budget of 0. ------------[ cut here ]------------ list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \ next=ffff88905f746e40. WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \ __list_add_valid_or_report+0xf3/0x130 CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+ RIP: 0010:__list_add_valid_or_report+0xf3/0x130 Call Trace: ? __warn+0xcd/0x250 ? __list_add_valid_or_report+0xf3/0x130 enqueue_to_backlog+0x923/0x1070 netif_rx_internal+0x92/0x2b0 __netif_rx+0x15/0x170 loopback_xmit+0x2ef/0x450 dev_hard_start_xmit+0x103/0x490 __dev_queue_xmit+0xeac/0x1950 ip_finish_output2+0x6cc/0x1620 ip_output+0x161/0x270 ip_push_pending_frames+0x155/0x1a0 raw_sendmsg+0xe13/0x1550 __sys_sendto+0x3bf/0x4e0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x5b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e The reproduction command is as follows: sysctl -w net.core.dev_weight=0 ping 127.0.0.1 This is because when the napi's weight is set to 0, process_backlog() may return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this napi to be re-polled in net_rx_action() until __do_softirq() times out. Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can be retriggered in enqueue_to_backlog(), causing this issue. Making the napi's weight always non-zero solves this problem. Triggering this issue requires system-wide admin (setting is not namespaced). Fixes: e38766054509 ("[NET]: Fix sysctl net.core.dev_weight") Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality") Signed-off-by: Liu Jian <liujian56@huawei.com> Link: https://patch.msgid.link/20250116143053.4146855-1-liujian56@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17Merge branch 'realtek-link-down'David S. Miller
Daniel Golle says: ==================== net: phy: realtek: fix status when link is down The .read_status method for RealTek RTL822x PHYs (both C22 and C45) has multilpe issues which result in reporting bogus link partner advertised modes as well as speed and duplex while the link is down and no cable is plugged in. Example: ethtool after disconnecting a 1000M/Full capable link partner, now with no wire plugged: Settings for lan1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full 2500baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full 2500baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 1000baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: on Port: Twisted Pair PHYAD: 7 Transceiver: external MDI-X: Unknown Supports Wake-on: d Wake-on: d Link detected: no Fix this by making sure all of the fields populated by rtl822x_c45_read_status() or rtl822x_read_status() get reset, also in case the link is down. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-17net: phy: realtek: always clear NBase-T lpaDaniel Golle
Clear NBase-T link partner advertisement before calling rtlgen_read_status() to avoid phy_resolve_aneg_linkmode() wrongly setting speed and duplex. This fixes bogus 2.5G/5G/10G link partner advertisement and thus speed and duplex being set by phy_resolve_aneg_linkmode() due to stale NBase-T lpa. Fixes: 68d5cd09e891 ("net: phy: realtek: change order of calls in C22 read_status()") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-17net: phy: realtek: clear master_slave_state if link is downDaniel Golle
rtlgen_decode_physr() which sets master_slave_state isn't called in case the link is down and other than rtlgen_read_status(), rtl822x_c45_read_status() doesn't implicitely clear master_slave_state. Avoid stale master_slave_state by always setting it to MASTER_SLAVE_STATE_UNKNOWN in rtl822x_c45_read_status() in case the link is down. Fixes: 081c9c0265c9 ("net: phy: realtek: read duplex and gbit master from PHYSR register") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-17net: phy: realtek: clear 1000Base-T lpa if link is downDaniel Golle
Only read 1000Base-T link partner advertisement if autonegotiation has completed and otherwise 1000Base-T link partner advertisement bits. This fixes bogus 1000Base-T link partner advertisement after link goes down (eg. by disconnecting the wire). Fixes: 5cb409b3960e ("net: phy: realtek: clear 1000Base-T link partner advertisement") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-16Merge tag 'net-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Notably this includes fixes for a few regressions spotted very recently. No known outstanding ones. Current release - regressions: - core: avoid CFI problems with sock priv helpers - xsk: bring back busy polling support - netpoll: ensure skb_pool list is always initialized Current release - new code bugs: - core: make page_pool_ref_netmem work with net iovs - ipv4: route: fix drop reason being overridden in ip_route_input_slow - udp: make rehash4 independent in udp_lib_rehash() Previous releases - regressions: - bpf: fix bpf_sk_select_reuseport() memory leak - openvswitch: fix lockup on tx to unregistering netdev with carrier - mptcp: be sure to send ack when mptcp-level window re-opens - eth: - bnxt: always recalculate features after XDP clearing, fix null-deref - mlx5: fix sub-function add port error handling - fec: handle page_pool_dev_alloc_pages error Previous releases - always broken: - vsock: some fixes due to transport de-assignment - eth: - ice: fix E825 initialization - mlx5e: fix inversion dependency warning while enabling IPsec tunnel - gtp: destroy device along with udp socket's netns dismantle. - xilinx: axienet: Fix IRQ coalescing packet count overflow" * tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits) netdev: avoid CFI problems with sock priv helpers net/mlx5e: Always start IPsec sequence number from 1 net/mlx5e: Rely on reqid in IPsec tunnel mode net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel net/mlx5: Clear port select structure when fail to create net/mlx5: SF, Fix add port error handling net/mlx5: Fix a lockdep warning as part of the write combining test net/mlx5: Fix RDMA TX steering prio net: make page_pool_ref_netmem work with net iovs net: ethernet: xgbe: re-add aneg to supported features in PHY quirks net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband selftests: net: Adapt ethtool mq tests to fix in qdisc graft net: fec: handle page_pool_dev_alloc_pages error net: netpoll: ensure skb_pool list is always initialized net: xilinx: axienet: Fix IRQ coalescing packet count overflow nfp: bpf: prevent integer overflow in nfp_bpf_event_output() selftests: mptcp: avoid spurious errors on disconnect mptcp: fix spurious wake-up on under memory pressure mptcp: be sure to send ack when mptcp-level window re-opens ...
2025-01-16Merge tag 'pm-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Update the documentation of cpuidle governors that does not match the code any more after previous functional changes (Rafael Wysocki) and fix up the cpufreq Kconfig file broken inadvertently by a previous update (Viresh Kumar)" * tag 'pm-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Move endif to the end of Kconfig file cpuidle: teo: Update documentation after previous changes cpuidle: menu: Update documentation after previous changes
2025-01-16Merge tag 'acpi-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent acpi_video_device_EDID() from returning a pointer to a memory region that should not be passed to kfree() which causes one of its users to crash randomly on attempts to free it (Chris Bainbridge)" * tag 'acpi-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Fix random crashes due to bad kfree()
2025-01-16Merge tag 'for-6.13-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: - handle d_path() errors when canonicalizing device mapper paths during device scan * tag 'for-6.13-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: add the missing error handling inside get_canonical_dev_path
2025-01-16Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge a cpufreq fix for 6.13: - Fix cpufreq Kconfig breakage after previous changes (Viresh Kumar). * pm-cpufreq: cpufreq: Move endif to the end of Kconfig file
2025-01-16netdev: avoid CFI problems with sock priv helpersJakub Kicinski
Li Li reports that casting away callback type may cause issues for CFI. Let's generate a small wrapper for each callback, to make sure compiler sees the anticipated types. Reported-by: Li Li <dualli@chromium.org> Link: https://lore.kernel.org/CANBPYPjQVqmzZ4J=rVQX87a9iuwmaetULwbK_5_3YWk2eGzkaA@mail.gmail.com Fixes: 170aafe35cb9 ("netdev: support binding dma-buf to netdevice") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250115161436.648646-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16Merge branch 'mlx5-misc-fixes-2025-01-15'Paolo Abeni
Tariq Toukan says: ==================== mlx5 misc fixes 2025-01-15 This patchset provides misc bug fixes from the team to the mlx5 core and Eth drivers. ==================== Link: https://patch.msgid.link/20250115113910.1990174-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Always start IPsec sequence number from 1Leon Romanovsky
According to RFC4303, section "3.3.3. Sequence Number Generation", the first packet sent using a given SA will contain a sequence number of 1. This is applicable to both ESN and non-ESN mode, which was not covered in commit mentioned in Fixes line. Fixes: 3d42c8cc67a8 ("net/mlx5e: Ensure that IPsec sequence packet number starts from 1") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Rely on reqid in IPsec tunnel modeLeon Romanovsky
All packet offloads SAs have reqid in it to make sure they have corresponding policy. While it is not strictly needed for transparent mode, it is extremely important in tunnel mode. In that mode, policy and SAs have different match criteria. Policy catches the whole subnet addresses, and SA catches the tunnel gateways addresses. The source address of such tunnel is not known during egress packet traversal in flow steering as it is added only after successful encryption. As reqid is required for packet offload and it is unique for every SA, we can safely rely on it only. The output below shows the configured egress policy and SA by strongswan: [leonro@vm ~]$ sudo ip x s src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel replay-window 0 flag af-unspec esn aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128 anti-replay esn context: seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0 replay_window 1, bitmap-length 1 00000000 crypto offload parameters: dev eth2 dir out mode packet [leonro@064 ~]$ sudo ip x p src 192.170.0.0/16 dst 192.170.0.0/16 dir out priority 383615 ptype main tmpl src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel crypto offload parameters: dev eth2 mode packet Fixes: b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnelLeon Romanovsky
Attempt to enable IPsec packet offload in tunnel mode in debug kernel generates the following kernel panic, which is happening due to two issues: 1. In SA add section, the should be _bh() variant when marking SA mode. 2. There is not needed flush_workqueue in SA delete routine. It is not needed as at this stage as it is removed from SADB and the running work will be canceled later in SA free. ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.12.0+ #4 Not tainted ----------------------------------------------------- charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] and this task is already holding: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 which would create a new lock dependency: (&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3} but this new dependency connects a SOFTIRQ-irq-safe lock: (&x->lock){+.-.}-{3:3} ... which became SOFTIRQ-irq-safe at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 to a SOFTIRQ-irq-unsafe lock: (&xa->xa_lock#24){+.+.}-{3:3} ... which became SOFTIRQ-irq-unsafe at: ... lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&xa->xa_lock#24); local_irq_disable(); lock(&x->lock); lock(&xa->xa_lock#24); <Interrupt> lock(&x->lock); *** DEADLOCK *** 2 locks held by charon/1337: #0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90 #1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&x->lock){+.-.}-{3:3} ops: 29 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 IN-SOFTIRQ-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffff87f9cd20>] __key.18+0x0/0x40 the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (&xa->xa_lock#24){+.+.}-{3:3} ops: 9 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 SOFTIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffffa078ff60>] __key.48+0x0/0xfffffffffff210a0 [mlx5_core] ... acquired at: __lock_acquire+0x30a0/0x5040 lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 stack backtrace: CPU: 7 UID: 0 PID: 1337 Comm: charon Not tainted 6.12.0+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x74/0xd0 check_irq_usage+0x12e8/0x1d90 ? print_shortest_lock_dependencies_backwards+0x1b0/0x1b0 ? check_chain_key+0x1bb/0x4c0 ? __lockdep_reset_lock+0x180/0x180 ? check_path.constprop.0+0x24/0x50 ? mark_lock+0x108/0x2fb0 ? print_circular_bug+0x9b0/0x9b0 ? mark_lock+0x108/0x2fb0 ? print_usage_bug.part.0+0x670/0x670 ? check_prev_add+0x1c4/0x2310 check_prev_add+0x1c4/0x2310 __lock_acquire+0x30a0/0x5040 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 lock_acquire+0x1be/0x520 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? __xfrm_state_delete+0x5f0/0xae0 ? lock_downgrade+0x6b0/0x6b0 _raw_spin_lock_bh+0x34/0x40 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 ? xfrm_get_sa+0x250/0x250 ? check_chain_key+0x1bb/0x4c0 xfrm_user_rcv_msg+0x493/0x880 ? copy_sec_ctx+0x270/0x270 ? check_chain_key+0x1bb/0x4c0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 netlink_rcv_skb+0x12e/0x380 ? copy_sec_ctx+0x270/0x270 ? netlink_ack+0xd90/0xd90 ? netlink_deliver_tap+0xcd/0xb60 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 ? netlink_attachskb+0x730/0x730 ? lock_acquire+0x1be/0x520 netlink_sendmsg+0x745/0xbe0 ? netlink_unicast+0x740/0x740 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x740/0x740 __sock_sendmsg+0xc5/0x190 ? fdget+0x163/0x1d0 __sys_sendto+0x1fe/0x2c0 ? __x64_sys_getpeername+0xb0/0xb0 ? do_user_addr_fault+0x856/0xe30 ? lock_acquire+0x1be/0x520 ? __task_pid_nr_ns+0x117/0x410 ? lock_downgrade+0x6b0/0x6b0 __x64_sys_sendto+0xdc/0x1b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f7d31291ba4 Code: 7d e8 89 4d d4 e8 4c 42 f7 ff 44 8b 4d d0 4c 8b 45 c8 89 c3 44 8b 55 d4 8b 7d e8 b8 2c 00 00 00 48 8b 55 d8 48 8b 75 e0 0f 05 <48> 3d 00 f0 ff ff 77 34 89 df 48 89 45 e8 e8 99 42 f7 ff 48 8b 45 RSP: 002b:00007f7d2ccd94f0 EFLAGS: 00000297 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7d31291ba4 RDX: 0000000000000028 RSI: 00007f7d2ccd96a0 RDI: 000000000000000a RBP: 00007f7d2ccd9530 R08: 00007f7d2ccd9598 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000028 R13: 00007f7d2ccd9598 R14: 00007f7d2ccd96a0 R15: 00000000000000e1 </TASK> Fixes: 4c24272b4e2b ("net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Clear port select structure when fail to createMark Zhang
Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]--- Fixes: dc48516ec7d3 ("net/mlx5: Lag, add support to create definers for LAG") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: SF, Fix add port error handlingChris Mi
If failed to add SF, error handling doesn't delete the SF from the SF table. But the hw resources are deleted. So when unload driver, hw resources will be deleted again. Firmware will report syndrome 0x68def3 which means "SF is not allocated can not deallocate". Fix it by delete SF from SF table if failed to add SF. Fixes: 2597ee190b4e ("net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Fix a lockdep warning as part of the write combining testYishai Hadas
Fix a lockdep warning [1] observed during the write combining test. The warning indicates a potential nested lock scenario that could lead to a deadlock. However, this is a false positive alarm because the SF lock and its parent lock are distinct ones. The lockdep confusion arises because the locks belong to the same object class (i.e., struct mlx5_core_dev). To resolve this, the code has been refactored to avoid taking both locks. Instead, only the parent lock is acquired. [1] raw_ethernet_bw/2118 is trying to acquire lock: [ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.620270] [ 213.620270] but task is already holding lock: [ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.622045] [ 213.622045] other info that might help us debug this: [ 213.622778] Possible unsafe locking scenario: [ 213.622778] [ 213.623465] CPU0 [ 213.623815] ---- [ 213.624148] lock(&dev->wc_state_lock); [ 213.624615] lock(&dev->wc_state_lock); [ 213.625071] [ 213.625071] *** DEADLOCK *** [ 213.625071] [ 213.625805] May be due to missing lock nesting notation [ 213.625805] [ 213.626522] 4 locks held by raw_ethernet_bw/2118: [ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0}, at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3}, at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs] [ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3}, at: ib_init_ucontext+0x49/0xf0 [ib_uverbs] [ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.631185] [ 213.631185] stack backtrace: [ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted 6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1 [ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 213.633785] Call Trace: [ 213.634099] [ 213.634393] dump_stack_lvl+0x7e/0xc0 [ 213.634806] print_deadlock_bug+0x278/0x3c0 [ 213.635265] __lock_acquire+0x15f4/0x2c40 [ 213.635712] lock_acquire+0xcd/0x2d0 [ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib] [ 213.637277] __mutex_lock+0x81/0xda0 [ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70 [ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib] [ 213.641144] ? debug_mutex_init+0x33/0x40 [ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib] [ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs] [ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0 [ib_uverbs] [ 213.643426] ? _copy_from_user+0x46/0x80 [ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs] [ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130 [ib_uverbs] [ 213.645213] ? __lock_acquire+0xa99/0x2c40 [ 213.645675] ? lock_acquire+0xcd/0x2d0 [ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.646625] ? reacquire_held_locks+0xcf/0x1f0 [ 213.647102] ? do_user_addr_fault+0x45d/0x770 [ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs] [ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0 [ 213.649060] ? do_user_addr_fault+0x4a8/0x770 [ 213.649528] do_syscall_64+0x6d/0x140 [ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 213.650478] RIP: 0033:0x7fa179b0737b [ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 [ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX: 00007fa179b0737b [ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI: 0000000000000003 [ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09: 0000000000000002 [ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12: 00007ffd2e6d487c [ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15: 00007ffd2e6d4f70 Fixes: d98995b4bf98 ("net/mlx5: Reimplement write combining test") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Fix RDMA TX steering prioPatrisious Haddad
User added steering rules at RDMA_TX were being added to the first prio, which is the counters prio. Fix that so that they are correctly added to the BYPASS_PRIO instead. Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-15net: make page_pool_ref_netmem work with net iovsPavel Begunkov
page_pool_ref_netmem() should work with either netmem representation, but currently it casts to a page with netmem_to_page(), which will fail with net iovs. Use netmem_get_pp_ref_count_ref() instead. Fixes: 8ab79ed50cf1 ("page_pool: devmem support") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/20250108220644.3528845-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15net: ethernet: xgbe: re-add aneg to supported features in PHY quirksHeiner Kallweit
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES included feature bits for aneg and TP/MII ports. SUPPORTED_TP | \ SUPPORTED_MII) SUPPORTED_10baseT_Full) SUPPORTED_100baseT_Full) SUPPORTED_1000baseT_Full) PHY_100BT_FEATURES | \ PHY_DEFAULT_FEATURES) PHY_1000BT_FEATURES) Referenced commit expanded PHY_GBIT_FEATURES, silently removing PHY_DEFAULT_FEATURES. The removed part can be re-added by using the new PHY_GBIT_FEATURES definition. Not clear to me is why nobody seems to have noticed this issue. I stumbled across this when checking what it takes to make phy_10_100_features_array et al private to phylib. Fixes: d0939c26c53a ("net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/46521973-7738-4157-9f5e-0bb6f694acba@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMIIVladimir Oltean
xpcs_config_2500basex() sets DW_VR_MII_DIG_CTRL1_2G5_EN, but xpcs_config_aneg_c37_sgmii() never unsets it. So, on a protocol change from 2500base-x to sgmii, the DW_VR_MII_DIG_CTRL1_2G5_EN bit will remain set. Fixes: f27abde3042a ("net: pcs: add 2500BASEX support for Intel mGbE controller") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250114164721.2879380-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII ↵Vladimir Oltean
w/o inband On a port with SGMII fixed-link at SPEED_1000, DW_VR_MII_DIG_CTRL1 gets set to 0x2404. This is incorrect, because bit 2 (DW_VR_MII_DIG_CTRL1_2G5_EN) is set. It comes from the previous write to DW_VR_MII_AN_CTRL, because the "val" variable is reused and is dirty. Actually, its value is 0x4, aka FIELD_PREP(DW_VR_MII_PCS_MODE_MASK, DW_VR_MII_PCS_MODE_C37_SGMII). Resolve the issue by clearing "val" to 0 when writing to a new register. After the fix, the register value is 0x2400. Prior to the blamed commit, when the read-modify-write was open-coded, the code saved the content of the DW_VR_MII_DIG_CTRL1 register in the "ret" variable. Fixes: ce8d6081fcf4 ("net: pcs: xpcs: add _modify() accessors") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250114164721.2879380-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15selftests: net: Adapt ethtool mq tests to fix in qdisc graftVictor Nogueira
Because of patch[1] the graft behaviour changed So the command: tcq replace parent 100:1 handle 204: Is no longer valid and will not delete 100:4 added by command: tcq replace parent 100:4 handle 204: pfifo_fast So to maintain the original behaviour, this patch manually deletes 100:4 and grafts 100:1 Note: This change will also work fine without [1] [1] https://lore.kernel.org/netdev/20250111151455.75480-1-jhs@mojatatu.com/T/#u Signed-off-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-14net: fec: handle page_pool_dev_alloc_pages errorKevin Groeneveld
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet. Fixes: 95698ff6177b5 ("net: fec: using page pool to manage RX buffers") Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20250113154846.1765414-1-kgroeneveld@lenbrook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: netpoll: ensure skb_pool list is always initializedJohn Sperbeck
When __netpoll_setup() is called directly, instead of through netpoll_setup(), the np->skb_pool list head isn't initialized. If skb_pool_flush() is later called, then we hit a NULL pointer in skb_queue_purge_reason(). This can be seen with this repro, when CONFIG_NETCONSOLE is enabled as a module: ip tuntap add mode tap tap0 ip link add name br0 type bridge ip link set dev tap0 master br0 modprobe netconsole netconsole=4444@10.0.0.1/br0,9353@10.0.0.2/ rmmod netconsole The backtrace is: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page ... ... ... Call Trace: <TASK> __netpoll_free+0xa5/0xf0 br_netpoll_cleanup+0x43/0x50 [bridge] do_netpoll_cleanup+0x43/0xc0 netconsole_netdev_event+0x1e3/0x300 [netconsole] unregister_netdevice_notifier+0xd9/0x150 cleanup_module+0x45/0x920 [netconsole] __se_sys_delete_module+0x205/0x290 do_syscall_64+0x70/0x150 entry_SYSCALL_64_after_hwframe+0x76/0x7e Move the skb_pool list setup and initial skb fill into __netpoll_setup(). Fixes: 221a9c1df790 ("net: netpoll: Individualize the skb pool") Signed-off-by: John Sperbeck <jsperbeck@google.com> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250114011354.2096812-1-jsperbeck@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: xilinx: axienet: Fix IRQ coalescing packet count overflowSean Anderson
If coalesce_count is greater than 255 it will not fit in the register and will overflow. This can be reproduced by running # ethtool -C ethX rx-frames 256 which will result in a timeout of 0us instead. Fix this by checking for invalid values and reporting an error. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://patch.msgid.link/20250113163001.2335235-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14nfp: bpf: prevent integer overflow in nfp_bpf_event_output()Dan Carpenter
The "sizeof(struct cmsg_bpf_event) + pkt_size + data_size" math could potentially have an integer wrapping bug on 32bit systems. Check for this and return an error. Fixes: 9816dd35ecec ("nfp: bpf: perf event output helpers support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/6074805b-e78d-4b8a-bf05-e929b5377c28@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14Merge tag 'seccomp-v6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fix from Kees Cook: "Fix a randconfig failure: - Unconditionally define stub for !CONFIG_SECCOMP (Linus Walleij)" * tag 'seccomp-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Stub for !CONFIG_SECCOMP
2025-01-14Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Fix E825 initialization Grzegorz Nitka says: E825 products have incorrect initialization procedure, which may lead to initialization failures and register values. Fix E825 products initialization by adding correct sync delay, checking the PHY revision only for current PHY and adding proper destination device when reading port/quad. In addition, E825 uses PF ID for indexing per PF registers and as a primary PHY lane number, which is incorrect. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Add correct PHY lane assignment ice: Fix ETH56G FC-FEC Rx offset value ice: Fix quad registers read on E825 ice: Fix E825 initialization ==================== Link: https://patch.msgid.link/20250113182840.3564250-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14Merge branch 'mptcp-fixes-for-connect-selftest-flakes'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: fixes for connect selftest flakes Last week, Jakub reported [1] that the MPTCP Connect selftest was unstable. It looked like it started after the introduction of some fixes [2]. After analysis from Paolo, these patches revealed existing bugs, that should be fixed by the following patches. - Patch 1: Make sure ACK are sent when MPTCP-level window re-opens. In some corner cases, the other peer was not notified when more data could be sent. A fix for v5.11, but depending on a feature introduced in v5.19. - Patch 2: Fix spurious wake-up under memory pressure. In this situation, the userspace could be invited to read data not being there yet. A fix for v6.7. - Patch 3: Fix a false positive error when running the MPTCP Connect selftest with the "disconnect" cases. The userspace could disconnect the socket too soon, which would reset (MP_FASTCLOSE) the connection, interpreted as an error by the test. A fix for v5.17. Link: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org [1] Link: https://lore.kernel.org/20241230-net-mptcp-rbuf-fixes-v1-0-8608af434ceb@kernel.org [2] ==================== Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-0-0d986ee7b1b6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14selftests: mptcp: avoid spurious errors on disconnectPaolo Abeni
The disconnect test-case generates spurious errors: INFO: disconnect INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI 01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL] file received by server does not match (in, out): Unexpected revents: POLLERR/POLLNVAL(19) -rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect Trailing bytes are: ��\����R���!8��u2��5N% -rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1 Trailing bytes are: ��\����R���!8��u2��5N% 02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ] 03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ] 04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ] [FAIL] Tests of the full disconnection have failed Time: 2 seconds The root cause is actually in the user-space bits: the test program currently disconnects as soon as all the pending data has been spooled, generating an FASTCLOSE. If such option reaches the peer before the latter has reached the closed status, the msk socket will report an error to the user-space, as per protocol specification, causing the above failure. Address the issue explicitly waiting for all the relevant sockets to reach a closed status before performing the disconnect. Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-3-0d986ee7b1b6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14mptcp: fix spurious wake-up on under memory pressurePaolo Abeni
The wake-up condition currently implemented by mptcp_epollin_ready() is wrong, as it could mark the MPTCP socket as readable even when no data are present and the system is under memory pressure. Explicitly check for some data being available in the receive queue. Fixes: 5684ab1a0eff ("mptcp: give rcvlowat some love") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-2-0d986ee7b1b6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14mptcp: be sure to send ack when mptcp-level window re-opensPaolo Abeni
mptcp_cleanup_rbuf() is responsible to send acks when the user-space reads enough data to update the receive windows significantly. It tries hard to avoid acquiring the subflow sockets locks by checking conditions similar to the ones implemented at the TCP level. To avoid too much code duplication - the MPTCP protocol can't reuse the TCP helpers as part of the relevant status is maintained into the msk socket - and multiple costly window size computation, mptcp_cleanup_rbuf uses a rough estimate for the most recently advertised window size: the MPTCP receive free space, as recorded as at last-ack time. Unfortunately the above does not allow mptcp_cleanup_rbuf() to detect a zero to non-zero win change in some corner cases, skipping the tcp_cleanup_rbuf call and leaving the peer stuck. After commit ea66758c1795 ("tcp: allow MPTCP to update the announced window"), MPTCP has actually cheap access to the announced window value. Use it in mptcp_cleanup_rbuf() for a more accurate ack generation. Fixes: e3859603ba13 ("mptcp: better msk receive window updates") Cc: stable@vger.kernel.org Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-1-0d986ee7b1b6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14cpufreq: Move endif to the end of Kconfig fileViresh Kumar
It is possible to enable few cpufreq drivers, without the framework being enabled. This happened due to a bug while moving the entries earlier. Fix it. Fixes: 7ee1378736f0 ("cpufreq: Move CPPC configs to common Kconfig and add RISC-V") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://patch.msgid.link/84ac7a8fa72a8fe20487bb0a350a758bce060965.1736488384.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-14Merge tag 'pci-v6.13-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fix from Bjorn Helgaas: - Prevent bwctrl NULL pointer dereference that caused hangs on shutdown on ASUS ROG Strix SCAR 17 G733PYV (Lukas Wunner) * tag 'pci-v6.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI/bwctrl: Fix NULL pointer deref on unbind and bind
2025-01-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One iscsi driver fix and one core fix. The core fix is an important one because a retry efficiency update is now causing some USB devices to get the wrong size on discovery (it upset their retry logic for READ_CAPACITY_16)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request scsi: core: Fix command pass through retry regression
2025-01-14Merge tag 'sound-6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Hopefully the last PR for 6.13. This became bigger than wished due to the timing after holiday breaks. The only large LOC is the additional document for Cirrus codec which is nice for users (and absolutely safe). All the rest are small fixes in ASoC Rcar and codecs as well as HD-audio quirks (And no fix for USB guitar pedals seen yet :)" * tag 'sound-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Fix volume adjustment issue on Lenovo ThinkBook 16P Gen5 ALSA: hda/realtek: fixup ASUS H7606W ALSA: hda/realtek: fixup ASUS GA605W ALSA: hda/realtek: Add support for Ayaneo System using CS35L41 HDA ASoC: rsnd: check rsnd_adg_clk_enable() return value ASoC: cs42l43: Add codec force suspend/resume ops ALSA: doc: Add codecs/index.rst to top-level index ALSA: doc: cs35l56: Add information about Cirrus Logic CS35L54/56/57 ASoC: samsung: Add missing depends on I2C MAINTAINERS: add missing maintainers for Simple Audio Card ASoC: samsung: Add missing selects for MFD_WM8994 ASoC: codecs: es8316: Fix HW rate calculation for 48Mhz MCLK ASoC: wm8994: Add depends on MFD core ASoC: tas2781: Fix occasional calibration failture ASoC: codecs: ES8326: Adjust ANA_MICBIAS to reduce pop noise
2025-01-14Merge branch 'vsock-some-fixes-due-to-transport-de-assignment'Paolo Abeni
Stefano Garzarella says: ==================== vsock: some fixes due to transport de-assignment v1: https://lore.kernel.org/netdev/20250108180617.154053-1-sgarzare@redhat.com/ v2: - Added patch 3 to cancel the virtio close delayed work when de-assigning the transport - Added patch 4 to clean the socket state after de-assigning the transport - Added patch 5 as suggested by Michael and Hyunwoo Kim. It's based on Hyunwoo Kim and Wongi Lee patch [1] but using WARN_ON and covering more functions - Added R-b/T-b tags This series includes two patches discussed in the thread started by Hyunwoo Kim a few weeks ago [1], plus 3 more patches added after some discussions on v1 (see changelog). All related to the case where a vsock socket is de-assigned from a transport (e.g., because the connect fails or is interrupted by a signal) and then assigned to another transport or to no-one (NULL). I tested with usual vsock test suite, plus Michal repro [2]. (Note: the repo works only if a G2H transport is not loaded, e.g. virtio-vsock driver). The first patch is a fix more appropriate to the problem reported in that thread, the second patch on the other hand is a related fix but of a different problem highlighted by Michal Luczaj. It's present only in vsock_bpf and already handled in af_vsock.c The third patch is to cancel the virtio close delayed work when de-assigning the transport, the fourth patch is to clean the socket state after de-assigning the transport, the last patch adds warnings and prevents null-ptr-deref in vsock_*[has_data|has_space]. Hyunwoo Kim, Michal, if you can test and report your Tested-by that would be great! [1] https://lore.kernel.org/netdev/Z2K%2FI4nlHdfMRTZC@v4bel-B760M-AORUS-ELITE-AX/ [2] https://lore.kernel.org/netdev/2b3062e3-bdaa-4c94-a3c0-2930595b9670@rbox.co/ ==================== Link: https://patch.msgid.link/20250110083511.30419-1-sgarzare@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14vsock: prevent null-ptr-deref in vsock_*[has_data|has_space]Stefano Garzarella
Recent reports have shown how we sometimes call vsock_*_has_data() when a vsock socket has been de-assigned from a transport (see attached links), but we shouldn't. Previous commits should have solved the real problems, but we may have more in the future, so to avoid null-ptr-deref, we can return 0 (no space, no data available) but with a warning. This way the code should continue to run in a nearly consistent state and have a warning that allows us to debug future problems. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/Z2K%2FI4nlHdfMRTZC@v4bel-B760M-AORUS-ELITE-AX/ Link: https://lore.kernel.org/netdev/5ca20d4c-1017-49c2-9516-f6f75fd331e9@rbox.co/ Link: https://lore.kernel.org/netdev/677f84a8.050a0220.25a300.01b3.GAE@google.com/ Co-developed-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Co-developed-by: Wongi Lee <qwerty@theori.io> Signed-off-by: Wongi Lee <qwerty@theori.io> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Reviewed-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14vsock: reset socket state when de-assigning the transportStefano Garzarella
Transport's release() and destruct() are called when de-assigning the vsock transport. These callbacks can touch some socket state like sock flags, sk_state, and peer_shutdown. Since we are reassigning the socket to a new transport during vsock_connect(), let's reset these fields to have a clean state with the new transport. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14vsock/virtio: cancel close work in the destructorStefano Garzarella
During virtio_transport_release() we can schedule a delayed work to perform the closing of the socket before destruction. The destructor is called either when the socket is really destroyed (reference counter to zero), or it can also be called when we are de-assigning the transport. In the former case, we are sure the delayed work has completed, because it holds a reference until it completes, so the destructor will definitely be called after the delayed work is finished. But in the latter case, the destructor is called by AF_VSOCK core, just after the release(), so there may still be delayed work scheduled. Refactor the code, moving the code to delete the close work already in the do_close() to a new function. Invoke it during destruction to make sure we don't leave any pending work. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Reported-by: Hyunwoo Kim <v4bel@theori.io> Closes: https://lore.kernel.org/netdev/Z37Sh+utS+iV3+eb@v4bel-B760M-AORUS-ELITE-AX/ Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Tested-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14vsock/bpf: return early if transport is not assignedStefano Garzarella
Some of the core functions can only be called if the transport has been assigned. As Michal reported, a socket might have the transport at NULL, for example after a failed connect(), causing the following trace: BUG: kernel NULL pointer dereference, address: 00000000000000a0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+ RIP: 0010:vsock_connectible_has_data+0x1f/0x40 Call Trace: vsock_bpf_recvmsg+0xca/0x5e0 sock_recvmsg+0xb9/0xc0 __sys_recvfrom+0xb3/0x130 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e So we need to check the `vsk->transport` in vsock_bpf_recvmsg(), especially for connected sockets (stream/seqpacket) as we already do in __vsock_connectible_recvmsg(). Fixes: 634f1a7110b4 ("vsock: support sockmap") Cc: stable@vger.kernel.org Reported-by: Michal Luczaj <mhal@rbox.co> Closes: https://lore.kernel.org/netdev/5ca20d4c-1017-49c2-9516-f6f75fd331e9@rbox.co/ Tested-by: Michal Luczaj <mhal@rbox.co> Reported-by: syzbot+3affdbfc986ecd9200fd@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/677f84a8.050a0220.25a300.01b3.GAE@google.com/ Tested-by: syzbot+3affdbfc986ecd9200fd@syzkaller.appspotmail.com Reviewed-by: Hyunwoo Kim <v4bel@theori.io> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14vsock/virtio: discard packets if the transport changesStefano Garzarella
If the socket has been de-assigned or assigned to another transport, we must discard any packets received because they are not expected and would cause issues when we access vsk->transport. A possible scenario is described by Hyunwoo Kim in the attached link, where after a first connect() interrupted by a signal, and a second connect() failed, we can find `vsk->transport` at NULL, leading to a NULL pointer dereference. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Reported-by: Hyunwoo Kim <v4bel@theori.io> Reported-by: Wongi Lee <qwerty@theori.io> Closes: https://lore.kernel.org/netdev/Z2LvdTTQR7dBmPb5@v4bel-B760M-AORUS-ELITE-AX/ Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 10:41:12 +0000