| Age | Commit message (Collapse) | Author |
|---|
|
Add boot_debug() calls to log various memory layout decisions and
randomization details during early startup, improving debugging
capabilities.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Introduce boot_debug() calls in vmem code to log page table mappings
including KASAN shadow mappings for improved early boot debugging.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Reorder the store_ipl_parmblock(), uv_query_info(), and command line
setup calls to occur earlier. This ensures debug printing covers all
memory tracking activities from the start.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Introduce boot_debug() calls to track memory detection, online ranges,
reserved areas, and allocations (except for VMEM allocations, which are
too frequent). Instead introduce dump_physmem_reserved() function which
prints out full memory tracking information. This helps in debugging
early boot memory handling.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
sclp_early_printk() ignores boot console debug settings and prints
unconditionally. It also prints message without any timestamp
or formatting. Convert it to pr_info().
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages in
the same format as regular printk. Timestamps appear only with earlyprintk
and are stored in the boot messages ring buffer, but are not propagated
to main kernel messages (if earlyprintk is not enabled). This prevents
double timestamps in the output.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Dump the boot message ring buffer when a crash occurs during boot, but
only if bootdebug is enabled. This helps assist in analyzing boot-time
issues by providing additional debugging information.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Enhance boot debugging by allowing the "bootdebug" kernel parameter to
accept an optional comma-separated list of prefixes. Only debug messages
starting with these prefixes will be printed during boot. For example:
bootdebug=startup,vmem
Not specifying a filter for the "bootdebug" parameter prints all debug
messages. The `boot_fmt` macro can be defined to set a common prefix:
#define boot_fmt(fmt) "startup: " fmt
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Suppress decompressor debug messages by default, similar to regular
kernel debug messages that require 'DEBUG' or 'dyndbg' to be enabled
(depending on CONFIG_DYNAMIC_DEBUG). Introduce a 'bootdebug' option to
enable printing these messages when needed.
All messages are still stored in the boot ring buffer regardless.
To enable boot debug messages:
bootdebug debug
Or combine with 'earlyprintk' to print them without delay:
bootdebug debug earlyprintk
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When earlyprintk is not specified, boot messages are only stored in a
ring buffer to be printed later by printk when console driver is
registered.
Critical messages from boot_emerg() are always printed immediately,
even without earlyprintk.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Modify boot_printk() to return int, aligning it with printk().
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Collect all boot messages into a ring buffer independent of the current
log level. This allows to retain all boot-time messages, which is
particularly useful for analyzing early crashes.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Now that boot_printk() supports decimal specifiers, update boot_emerg()
messages to use %d and %lu instead of %x and %lx where appropriate.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Replaces boot_printk() calls with appropriate loglevel-specific helpers
such as boot_emerg(), boot_warn(), and boot_debug().
Using functions with explicit log levels improves log clarity and aligns
the boot code with standard kernel logging practices. This makes it
easier to filter and manage boot-time messages based on their severity.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add message severity levels for boot messages, similar to the main
kernel. Support command-line options that control console output
verbosity, including "loglevel," "ignore_loglevel," "debug," and "quiet".
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Enable the boot_printk() function to print decimal values. Add the 'd',
'i', and 'u' conversion specifiers support.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Enhance boot_printk() to support field width and padding across all
argument types for better formatting.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add support for the 'l', 'h', 'hh', and 'z' length modifiers.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add "%%" support for the boot_printk() format string.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
For KASAN shadow mappings, switch from physmem_alloc_or_die() to
physmem_alloc() and return INVALID_PHYS_ADDR on allocation failure. This
allows gracefully falling back from large pages to smaller pages (1MB
or 4KB) if the allocation of 2GB size/aligned pages cannot be fulfilled.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add physmem_alloc() as a variant of physmem_alloc_or_die() that can return
an error instead of triggering a panic on OOM. This allows callers to
implement alternative fallback paths.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The new name better reflects the function's behavior, emphasizing that
it will terminate execution if allocation fails.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Commit c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address
spaces") introduced a large_allowed() helper that restricts which mapping
modes can use large pages. This change unintentionally prevented KASAN
shadow mappings from using large pages, despite there being no reason
to avoid them. In fact, large pages are preferred for performance.
Since commit d8073dc6bc04 ("s390/mm: Allow large pages only for aligned
physical addresses"), both can_large_pud() and can_large_pmd() call _pa()
to check if large page physical addresses are aligned. However, _pa()
has a side effect: it allocates memory in POPULATE_KASAN_MAP_SHADOW
mode.
Rename large_allowed() to large_page_mapping_allowed() and add
POPULATE_KASAN_MAP_SHADOW to the allowed list to restore large page
mappings for KASAN shadows.
While large_page_mapping_allowed() isn't strictly necessary with current
mapping modes since disallowed modes either don't map anything or fail
alignment and size checks, keep it for clarity.
Rename _pa() to resolve_pa_may_alloc() for clarity and to emphasize
existing side effect. Rework can_large_pud()/can_large_pmd() to take
the side effect into consideration and actually return physical address
instead of just checking conditions.
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The futex operation FUTEX_OP_ANDN is supposed to implement
*(int *)UADDR2 &= ~OPARG;
The s390 implementation just implements an AND instead of ANDN.
Add the missing bitwise not operation to oparg to fix this.
This is broken since nearly 19 years, so it looks like user space is
not making use of this operation.
Fixes: 3363fbdd6fb4 ("[PATCH] s390: futex atomic operations")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Introduce diag310 and memory topology related subcodes.
Provide memory topology information obtanied from diag310 to userspace
via diag ioctl.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Provide an optimized arch_test_bit() implementation which makes use of
flag output constraint. This generates slightly better code:
bloat-o-meter:
add/remove: 51/19 grow/shrink: 450/2444 up/down: 25198/-49136 (-23938)
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The generic bitops implementation is nearly identical to the s390
implementation therefore switch to the generic variant.
This results in a small kernel image size decrease. This is because for
the generic variant the nr parameter for most bitops functions is of
type unsigned int while the s390 variant uses unsigned long.
bloat-o-meter:
add/remove: 670/670 grow/shrink: 167/209 up/down: 21440/-21792 (-352)
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The inline assembly uses the ahi instruction to decrement and test
whether more than 256 bytes are left for conversion. But the nr
variable passed is of type unsigned long. Therefore use aghi.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reported-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The current code compares whether the nr argument is less or equal to
zero. As nr is of type unsigned long, this isn't correct. Fix this by just
testing for zero. This is also reported by checkpatch:
unsignedLessThanZero: Checking if unsigned expression 'nr--' is less
than zero.
Reported-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
exrl is present in all machines currently supported, therefore prefer
it over ex. This saves one instruction and doesn't need an additional
register to hold the address of the target instruction.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
exrl is present in all machines currently supported, therefore prefer
it over ex. This saves one instruction and doesn't need an additional
register to hold the address of the target instruction.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
exrl is present in all machines currently supported, therefore prefer
it over ex. This saves one instruction and doesn't need an additional
register to hold the address of the target instruction.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
exrl is present in all machines currently supported, therefore prefer
it over ex. This saves one instruction and doesn't need an additional
register to hold the address of the target instruction.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add early polarization detection instead of assuming horizontal
polarization.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
While converting to generic mmu_gather with commit 9de7d833e370
("s390/tlb: Convert to generic mmu_gather") __tlb_adjust_range()
is called from pte|pmd|p4d_free_tlb(), but not for pud_free_tlb().
__tlb_adjust_range() adjusts the span of TLB range to be flushed,
but s390 does not make use of it. Thus, this change is only for
consistency.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-5-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-4-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-3-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-2-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-1-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Instead of distributing the memory allocation and pointer arithmetic to
place slib and sl on the page that is allocated for them over multiple
functions and comments, move both into the same context directly next to
each other, so that the knowledge of how this is done is immediately
visible.
The actual layout in memory doesn't change with this, just the structure
of the code to achieve it.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
ccw_device_get_ciw() already uses array indices to iterate over the vector
of CIWs, but then switches to pointer arithmetic when returning the one it
found. Change this to make it more consistent.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This feature is not only utilized by OSA, but by QDIO in general. Clear
up possible confusions.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Niklas Schnelle says:
===================
This patch series enhances the introspectability of the PCI device
recovery for firmware. Until now when Linux performs recovery in
response to a firmware error report. For example, until now firmware
debug data would have no indication if the recovery was successfull or
if it failed, for example due to KVM pass-through.
Improve on this by reporting recovery status as well as some debug
information such as device driver name and s390dbf/pci_msg/sprintf logs
via the SCLP Write Event Data Action Qualifier 2 (Log Data provided)
mechanism.
===================
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Move implementation of s390 diagnose code to diag specific folder.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Retrieve electrical power readings for resources in a computing
environment via diag 0x324. diag 0x324 stores the power readings in the
power information block (pib).
Provide power readings from pib via diag324 ioctl interface. diag324
ioctl provides new pib to the user only if the threshold time has passed
since the last call. Otherwise, cache data is returned. When there are
no active readers, cleanup of pib buffer is performed.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Create a misc device /dev/diag to fetch diagnose specific information
from the kernel and provide it to userspace.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
exrl is present in all machines currently supported in the linux
kernel, therefore prefer it over ex. This saves one instruction
and doesn't need an additional register to hold the address of the
target instruction.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
By default page protection definitions like PAGE_RX have the _PAGE_NOEXEC
bit set. For older machines without the instruction execution protection
facility this bit is not allowed to be used in page table entries, and
therefore must be removed.
This is done at a couple of page table walkers, but also at some but not
all page table modification functions like ptep_modify_prot_commit(). Avoid
all of this and change the page, segment and region3 protection definitions
so that the noexec bit is masked out automatically if the instruction
execution-protection facility is not available. This is similar to what
also various other architectures do which had to solve the same problem.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Remove unused PAGE_KERNEL_EXEC, SEGMENT_KERNEL_EXEC,
and REGION3_KERNEL_EXEC.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
