summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-onJohan Hovold
The bob supply is used by several pmic regulators and components which are not (yet fully) described in the devicetree. Mark the regulator as always-on for now. Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-5-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-onJohan Hovold
The s12b supply is used by several pmic regulators as well as the wlan/bluetooth radio which are not yet fully described in the devicetree. Mark the regulator as always-on for now. Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-4-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-onJohan Hovold
The s10b supply is used by several components that are not (yet) described in devicetree (e.g. ram, charger, ec) and must not be disabled. Mark the regulator as always-on. Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-3-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-onJohan Hovold
The s11b supply is used by the wlan module (as well as some of the pmics) which are not yet fully described in the devicetree. Mark the regulator as always-on for now. Fixes: 123b30a75623 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller") Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-2-johan+linaro@kernel.org
2023-03-21arm64: dts: qcom: sm8450-hdk: align WCD9385 reset pin with downstream configKrzysztof Kozlowski
Downstream DTS uses 16 mA drive strength for the WCD9385 audio codec RESET_N reset pin. It also pulls the pin down in shutdown mode, thus it is more like a shutdown pin, not a reset. Use the same settings here for HDK8450 and keep the WCD9385 by default in powered off (so pin as low). Align the name of pin configuration node with other pins in the DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308183317.559253-2-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8450-hdk: use precise WCD9385 compatibleKrzysztof Kozlowski
The HDK8450 uses WCD9385 audio codec, so use precise compatible, even though WCD9380 and WCD9385 are both compatible. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308183317.559253-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8450-hdk: use recommended drive strength for speaker SD_NKrzysztof Kozlowski
Downstream DTS (and sc8280xp-lenovo-thinkpad-x13s with the same speakers) uses 16 mA drive strength for the WSA8835 speaker SD_N reset/shutdown pin. Use the same for HDK8450, as it is seem the recommended value. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308142712.277659-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8150: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-8-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sm6350: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-7-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sm6115: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-6-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sdm845: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-5-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sc7180: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-4-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sdm845-oneplus-common: add Hall sensorGergo Koteles
Enable the Hall effect sensor (flip cover) for OnePlus 6/6T. The GPIO is mapped to SW_LID events as in msm8916, msm8994, msm8998 devices. Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306174147.185239-1-soyer@irl.hu
2023-03-21arm64: dts: qcom: drop redundant line breaksKrzysztof Kozlowski
Remove trailing, redundant line breaks. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306081430.28491-2-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sdm845-db845c: drop empty node overrideKrzysztof Kozlowski
Drop empty override of pm8998_gpios. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306081430.28491-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: pm660: align thermal node names with bindingsKrzysztof Kozlowski
Bindings expect thermal node names to end with '-thermal', so fix pm660 and pm660l: sda660-inforce-ifc6560.dtb: thermal-zones: 'pm660', 'pm660l' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230305154308.241651-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8350-microsoft-surface: fix USB dual-role mode propertyKrzysztof Kozlowski
The "dr_mode" is a property of USB DWC3 node, not the Qualcomm wrapper one: sm8350-microsoft-surface-duo2.dtb: usb@a6f8800: 'dr_mode' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+' Fixes: c16160cfa565 ("arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304130315.51595-2-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8250-xiaomi-elish: fix USB maximum speed propertyKrzysztof Kozlowski
Fix typo in USB DWC3 node maximum speed property. Fixes: a41b617530bf ("arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304130315.51595-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sa8775p-ride: enable the BT UART portBartosz Golaszewski
Enable the high-speed UART port connected to the Bluetooth controller on the sa8775p-adp development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-10-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable the GNSS UART portBartosz Golaszewski
Enable the high-speed UART port connected to the GNSS controller on the sa8775p-adp development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-9-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add high-speed UART nodesBartosz Golaszewski
Add two UART nodes that are known to be used by existing development boards with this SoC. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-8-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable the SPI nodeBartosz Golaszewski
Enable the SPI interface exposed on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-7-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add the spi16 nodeBartosz Golaszewski
Add the SPI controller node for the interface exposed on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-6-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable i2c18Bartosz Golaszewski
This enables the I2C interface on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-5-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add the i2c18 nodeBartosz Golaszewski
Add a disabled node for the I2C interface that's exposed on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-4-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable QUPv3 #2Bartosz Golaszewski
Enable the second instance of the QUPv3 engine on the sa8775p-ride board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-3-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add the QUPv3 #2 nodeBartosz Golaszewski
Add the second instance of the QUPv3 engine to the sa8775p.dtsi. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-2-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: pm8150l: add spmi-flash-led nodeDanila Tikhonov
Add a node describing the flash block found on pm8150l. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230321182319.24958-1-danila@jiaxyga.com
2023-03-21arm64: dts: qcom: sdm845: Fix the BAM DMA engine compatible stringBhupesh Sharma
As per documentation, Qualcomm SDM845 SoC supports BAM DMA engine v1.7.4, so use the correct compatible strings. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230321190118.3327360-2-bhupesh.sharma@linaro.org
2023-03-21arm64: dts: qcom: sm8550-mtp: add pmic glink nodeNeil Armstrong
Add the pmic glink node linked with the DWC3 USB controller switched to OTG mode and tagged with usb-role-switch. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-11-552f3b721f9e@linaro.org
2023-03-21arm64: dts: qcom: sm8450-hdk: add pmic glink nodeNeil Armstrong
Add the pmic glink node linked with the DWC3 USB controller switched to OTG mode and tagged with usb-role-switch. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-10-552f3b721f9e@linaro.org
2023-03-21arm64: dts: qcom: sm8350-hdk: add pmic glink nodeNeil Armstrong
Add the pmic glink node linked with the DWC3 USB controller switched to OTG mode and tagged with usb-role-switch. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-9-552f3b721f9e@linaro.org
2023-03-21arm64: dts: qcom: sm8550: add port subnodes in dwc3 nodeNeil Armstrong
Add ports subnodes in dwc3 node to avoid repeating the same description in each board DT. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-8-552f3b721f9e@linaro.org
2023-03-21arm64: dts: qcom: sm8450: add port subnodes in dwc3 nodeNeil Armstrong
Add ports subnodes in dwc3 node to avoid repeating the same description in each board DT. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-7-552f3b721f9e@linaro.org
2023-03-21arm64: dts: qcom: sm8350: add port subnodes in dwc3 nodeNeil Armstrong
Add ports subnodes in dwc3 node to avoid repeating the same description in each board DT. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-6-552f3b721f9e@linaro.org
2023-03-19arm64: dts: qcom: sm6115: Move SDHC node(s)'s 'pinctrl' properties to dtsBhupesh Sharma
Normally the 'pinctrl' properties of a SDHC controller and the chip detect pin settings are dependent on the type of the slots (for e.g uSD card slot), regulators and GPIO(s) available on the board(s). So, move the same from the sm6115 dtsi file to the respective board file(s). Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230314074001.1873781-1-bhupesh.sharma@linaro.org
2023-03-19arm64: dts: qcom: sm6115: Move USB node's 'maximum-speed' and 'dr_mode' ↵Bhupesh Sharma
properties to dts Normally the 'maximum-speed' and 'dr_mode' properties of a USB controller + port is dependent on the type of the ports, regulators and mode change interrupt routing available on the board(s). So, move the same from the sm6115 dtsi file to respective board file(s). Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230314083633.1882214-3-bhupesh.sharma@linaro.org
2023-03-19arm64: dts: qcom: sm6115: Cleanup USB node's labelBhupesh Sharma
There is only one USB controller present on SM6115 / SM4250 Qualcomm SoC, so drop the numbering used with USB node's label names in the dtsi and the related sm4250-oneplus-billie2.dts. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230314083633.1882214-2-bhupesh.sharma@linaro.org
2023-03-16arm64: dts: qcom: sc8280xp: fix external display power domainJohan Hovold
Fix the external display controller nodes which erroneously described the controllers as belonging to CX rather than MMCX. Fixes: 19d3bb90754f ("arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230316141252.2436-1-johan+linaro@kernel.org
2023-03-15arm64: dts: qcom: msm8916: Fix tsens_mode unit addressStephan Gerhold
The reg address of the tsens_mode nvmem cell is correct but the unit address does not match (0xec vs 0xef). Fix it. No functional change. Fixes: 24aafd041fb2 ("arm64: dts: qcom: msm8916: specify per-sensor calibration cells") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308123617.101211-1-stephan.gerhold@kernkonzept.com
2023-03-15arm64: dts: qcom: sm8550: misc style fixesNeil Armstrong
Miscellaneous DT fixes to remove spurious blank line and enhance readability. Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi") Fixes: d7da51db5b81 ("arm64: dts: qcom: sm8550: add display hardware devices") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-sm8550-upstream-dt-fixups-v1-3-595b02067672@linaro.org
2023-03-15arm64: dts: qcom: sm8550: fix qup_spi0_cs nodeNeil Armstrong
The node is incomplete and doesn't need a subnode, add the missing properties and move everything to the root of qup-spi0-cs-state node. Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-sm8550-upstream-dt-fixups-v1-2-595b02067672@linaro.org
2023-03-15arm64: dts: qcom: sm8250-xiaomi-elish: correct GPIO keys wakeupKrzysztof Kozlowski
gpio-keys,wakeup is a deprecated property: sm8250-xiaomi-elish.dtb: gpio-keys: key-vol-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304123358.34274-8-krzysztof.kozlowski@linaro.org
2023-03-15arm64: dts: qcom: sm8250-sony-xperia: correct GPIO keys wakeupKrzysztof Kozlowski
gpio-keys,wakeup is a deprecated property: sm8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304123358.34274-7-krzysztof.kozlowski@linaro.org
2023-03-15arm64: dts: qcom: sm6115p-lenovo-j606f: correct GPIO keys wakeupKrzysztof Kozlowski
gpio-keys,wakeup is a deprecated property: sm6115p-lenovo-j606f.dtb: gpio-keys: key-volume-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304123358.34274-6-krzysztof.kozlowski@linaro.org
2023-03-15arm64: dts: qcom: sdm630-sony-xperia: correct GPIO keys wakeupKrzysztof Kozlowski
gpio-keys,wakeup is a deprecated property: sdm630-sony-xperia-nile-voyager.dtb: gpio-keys: key-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304123358.34274-5-krzysztof.kozlowski@linaro.org
2023-03-15arm64: dts: qcom: sc7280-idp: correct GPIO keys wakeupKrzysztof Kozlowski
gpio-keys,wakeup is a deprecated property: sc7280-idp.dtb: gpio-keys: key-volume-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304123358.34274-4-krzysztof.kozlowski@linaro.org
2023-03-15arm64: dts: qcom: msm8998-sony-xperia: correct GPIO keys wakeupKrzysztof Kozlowski
gpio-keys,wakeup is a deprecated property: msm8998-sony-xperia-yoshino-lilac.dtb: gpio-keys: button-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304123358.34274-3-krzysztof.kozlowski@linaro.org
2023-03-15arm64: dts: qcom: msm8998-fxtec: correct GPIO keys wakeupKrzysztof Kozlowski
gpio-keys,wakeup is a deprecated property: msm8998-fxtec-pro1.dtb: gpio-hall-sensors: event-hall-sensor1: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304123358.34274-2-krzysztof.kozlowski@linaro.org
2023-03-15arm64: dts: qcom: sm8150-kumano: correct GPIO keys wakeupKrzysztof Kozlowski
gpio-keys,wakeup is a deprecated property: sm8150-sony-xperia-kumano-bahamut.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304123358.34274-1-krzysztof.kozlowski@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 23:18:18 +0000