summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-23Bluetooth: btintel: Allow configuring drive strength of BRIKiran K
BRI (Bluetooth Radio Interface) traffic from CNVr to CNVi was found causing cross talk step errors to WiFi. To avoid this potential issue OEM platforms can replace BRI resistor to adjust the BRI response line drive strength. During the *setup*, driver reads the drive strength value from uefi variable and passes it to the controller via vendor specific command with opcode 0xfc0a. dmesg: .. [21.982720] Bluetooth: hci0: Bootloader timestamp 2023.33 buildtype 1 build 45995 [21.984250] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-iml.sfi [21.984255] Bluetooth: hci0: Boot Address: 0x30099000 [21.984256] Bluetooth: hci0: Firmware Version: 160-24.24 [22.011501] Bluetooth: hci0: Waiting for firmware download to complete [22.011518] Bluetooth: hci0: Firmware loaded in 26624 usecs [22.011584] Bluetooth: hci0: Waiting for device to boot [22.013546] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [22.013552] Bluetooth: hci0: Device booted in 1967 usecs ... [22.013792] Bluetooth: hci0: dsbr: enable: 0x01 value: 0x0b ... [22.015027] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291.sfi [22.015041] Bluetooth: hci0: Boot Address: 0x10000800 [22.015043] Bluetooth: hci0: Firmware Version: 160-24.24 [22.395821] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [22.395828] Bluetooth: BNEP filters: protocol multicast ... Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-23net: mana: Fix race of mana_hwc_post_rx_wqe and new hwc responseHaiyang Zhang
The mana_hwc_rx_event_handler() / mana_hwc_handle_resp() calls complete(&ctx->comp_event) before posting the wqe back. It's possible that other callers, like mana_create_txq(), start the next round of mana_hwc_send_request() before the posting of wqe. And if the HW is fast enough to respond, it can hit no_wqe error on the HW channel, then the response message is lost. The mana driver may fail to create queues and open, because of waiting for the HW response and timed out. Sample dmesg: [ 528.610840] mana 39d4:00:02.0: HWC: Request timed out! [ 528.614452] mana 39d4:00:02.0: Failed to send mana message: -110, 0x0 [ 528.618326] mana 39d4:00:02.0 enP14804s2: Failed to create WQ object: -110 To fix it, move posting of rx wqe before complete(&ctx->comp_event). Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-23net: drop special comment styleJohannes Berg
As we discussed in the room at netdevconf earlier this week, drop the requirement for special comment style for netdev. For checkpatch, the general check accepts both right now, so simply drop the special request there as well. Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-22pktgen: use cpus_read_lock() in pg_net_init()Eric Dumazet
I have seen the WARN_ON(smp_processor_id() != cpu) firing in pktgen_thread_worker() during tests. We must use cpus_read_lock()/cpus_read_unlock() around the for_each_online_cpu(cpu) loop. While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240821175339.1191779-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-23Merge tag 'net-6.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and netfilter. Current release - regressions: - virtio_net: avoid crash on resume - move netdev_tx_reset_queue() call before RX napi enable Current release - new code bugs: - net/mlx5e: fix page leak and incorrect header release w/ HW GRO Previous releases - regressions: - udp: fix receiving fraglist GSO packets - tcp: prevent refcount underflow due to concurrent execution of tcp_sk_exit_batch() Previous releases - always broken: - ipv6: fix possible UAF when incrementing error counters on output - ip6: tunnel: prevent merging of packets with different L2 - mptcp: pm: fix IDs not being reusable - bonding: fix potential crashes in IPsec offload handling - Bluetooth: HCI: - MGMT: add error handling to pair_device() to avoid a crash - invert LE State quirk to be opt-out rather then opt-in - fix LE quote calculation - drv: dsa: VLAN fixes for Ocelot driver - drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings - drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192 Misc: - netpoll: do not export netpoll_poll_[disable|enable]() - MAINTAINERS: update the list of networking headers" * tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits) s390/iucv: Fix vargs handling in iucv_alloc_device() net: ovs: fix ovs_drop_reasons error net: xilinx: axienet: Fix dangling multicast addresses net: xilinx: axienet: Always disable promiscuous mode MAINTAINERS: Mark JME Network Driver as Odd Fixes MAINTAINERS: Add header files to NETWORKING sections MAINTAINERS: Add limited globs for Networking headers MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS octeontx2-af: Fix CPT AF register offset calculation net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F net: ngbe: Fix phy mode set to external phy netfilter: flowtable: validate vlan header bnxt_en: Fix double DMA unmapping for XDP_REDIRECT ipv6: prevent possible UAF in ip6_xmit() ipv6: fix possible UAF in ip6_finish_output2() ipv6: prevent UAF in ip6_send_skb() netpoll: do not export netpoll_poll_[disable|enable]() selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path udp: fix receiving fraglist GSO packets ...
2024-08-23Merge tag 'kbuild-fixes-v6.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Eliminate the fdtoverlay command duplication in scripts/Makefile.lib - Fix 'make compile_commands.json' for external modules - Ensure scripts/kconfig/merge_config.sh handles missing newlines - Fix some build errors on macOS * tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: fix typos "prequisites" to "prerequisites" Documentation/llvm: turn make command for ccache into code block kbuild: avoid scripts/kallsyms parsing /dev/null treewide: remove unnecessary <linux/version.h> inclusion scripts: kconfig: merge_config: config files: add a trailing newline Makefile: add $(srctree) to dependency of compile_commands.json target kbuild: clean up code duplication in cmd_fdtoverlay
2024-08-22s390/iucv: Fix vargs handling in iucv_alloc_device()Alexandra Winter
iucv_alloc_device() gets a format string and a varying number of arguments. This is incorrectly forwarded by calling dev_set_name() with the format string and a va_list, while dev_set_name() expects also a varying number of arguments. Symptoms: Corrupted iucv device names, which can result in log messages like: sysfs: cannot create duplicate filename '/devices/iucv/hvc_iucv1827699952' Fixes: 4452e8ef8c36 ("s390/iucv: Provide iucv_alloc_device() / iucv_release_device()") Link: https://bugzilla.suse.com/show_bug.cgi?id=1228425 Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20240821091337.3627068-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22net: ovs: fix ovs_drop_reasons errorMenglong Dong
There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is "OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1, which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION". And as Adrian tested, without the patch, adding flow to drop packets results in: drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97) origin: software input port ifindex: 8 timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec protocol: 0x800 length: 98 original length: 98 drop reason: OVS_DROP_ACTION_ERROR With the patch, the same results in: drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97) origin: software input port ifindex: 8 timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec protocol: 0x800 length: 98 original length: 98 drop reason: OVS_DROP_LAST_ACTION Fix this by initializing ovs_drop_reasons with index. Fixes: 9d802da40b7c ("net: openvswitch: add last-action drop reason") Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Tested-by: Adrian Moreno <amorenoz@redhat.com> Reviewed-by: Adrian Moreno <amorenoz@redhat.com> Link: https://patch.msgid.link/20240821123252.186305-1-dongml2@chinatelecom.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22Merge tag 'nf-24-08-22' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 disable BH when collecting stats via hardware offload to ensure concurrent updates from packet path do not result in losing stats. From Sebastian Andrzej Siewior. Patch #2 uses write seqcount to reset counters serialize against reader. Also from Sebastian Andrzej Siewior. Patch #3 ensures vlan header is in place before accessing its fields, according to KMSAN splat triggered by syzbot. * tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: flowtable: validate vlan header netfilter: nft_counter: Synchronize nft_counter_reset() against reader. netfilter: nft_counter: Disable BH in nft_counter_offload_stats(). ==================== Link: https://patch.msgid.link/20240822101842.4234-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22Merge branch 'net-xilinx-axienet-multicast-fixes-and-improvements'Jakub Kicinski
Sean Anderson says: ==================== net: xilinx: axienet: Multicast fixes and improvements [part] ==================== First two patches of the series which are fixes. Link: https://patch.msgid.link/20240822154059.1066595-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22net: xilinx: axienet: Fix dangling multicast addressesSean Anderson
If a multicast address is removed but there are still some multicast addresses, that address would remain programmed into the frame filter. Fix this by explicitly setting the enable bit for each filter. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240822154059.1066595-3-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22net: xilinx: axienet: Always disable promiscuous modeSean Anderson
If promiscuous mode is disabled when there are fewer than four multicast addresses, then it will not be reflected in the hardware. Fix this by always clearing the promiscuous mode flag even when we program multicast addresses. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240822154059.1066595-2-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-23kbuild: fix typos "prequisites" to "prerequisites"Masahiro Yamada
This typo in scripts/Makefile.build has been present for more than 20 years. It was accidentally copy-pasted to other scripts/Makefile.* files. Fix them all. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2024-08-22Merge branch 'maintainers-networking-updates'Paolo Abeni
Simon Horman says: ==================== MAINTAINERS: Networking updates This series includes Networking-related updates to MAINTAINERS. * Patches 1-4 aim to assign header files with "*net*' and '*skbuff*' in their name to Networking-related sections within Maintainers. There are a few such files left over after this patches. I have to sent separate patches to add them to SCSI SUBSYSTEM and NETWORKING DRIVERS (WIRELESS) sections [1][2]. [1] https://lore.kernel.org/linux-scsi/20240816-scsi-mnt-v1-1-439af8b1c28b@kernel.org/ [2] https://lore.kernel.org/linux-wireless/20240816-wifi-mnt-v1-1-3fb3bf5d44aa@kernel.org/ * Patch 5 updates the status of the JME driver to 'Odd Fixes' ==================== Link: https://patch.msgid.link/20240821-net-mnt-v2-0-59a5af38e69d@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Mark JME Network Driver as Odd FixesSimon Horman
This driver only appears to have received sporadic clean-ups, typically part of some tree-wide activity, and fixes for quite some time. And according to the maintainer, Guo-Fu Tseng, the device has been EOLed for a long time (see Link). Accordingly, it seems appropriate to mark this driver as odd fixes. Cc: Moon Yeounsu <yyyynoom@gmail.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Link: https://lore.kernel.org/netdev/20240805003139.M94125@cooldavid.org/ Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Add header files to NETWORKING sectionsSimon Horman
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" or "skbuff" in their name. This patch adds a number of such files to the NETWORKING DRIVERS and NETWORKING [GENERAL] sections. Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Add limited globs for Networking headersSimon Horman
This aims to add limited globs to improve the coverage of header files in the NETWORKING DRIVERS and NETWORKING [GENERAL] sections. It is done so in a minimal way to exclude overlap with other sections. And so as not to require "X" entries to exclude files otherwise matched by these new globs. While imperfect, due to it's limited nature, this does extend coverage of header files by these sections. And aims to automatically cover new files that seem very likely belong to these sections. The include/linux/netdev* glob (both sections) + Subsumes the entries for: - include/linux/netdevice.h + Extends the sections to cover - include/linux/netdevice_xmit.h - include/linux/netdev_features.h The include/uapi/linux/netdev* globs: (both sections) + Subsumes the entries for: - include/linux/netdevice.h + Extends the sections to cover - include/linux/netdev.h The include/linux/skbuff* glob (NETWORKING [GENERAL] section only): + Subsumes the entry for: - include/linux/skbuff.h + Extends the section to cover - include/linux/skbuff_ref.h A include/uapi/linux/net_* glob was not added to the NETWORKING [GENERAL] section. Although it would subsume the entry for include/uapi/linux/net_namespace.h, which is fine, it would also extend coverage to: - include/uapi/linux/net_dropmon.h, which belongs to the NETWORK DROP MONITOR section - include/uapi/linux/net_tstamp.h which, as per an earlier patch in this series, belongs to the SOCKET TIMESTAMPING section Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING sectionSimon Horman
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22MAINTAINERS: Add sonet.h to ATM section of MAINTAINERSSimon Horman
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. It seems that sonet.h is included in ATM related source files, and thus that ATM is the most relevant section for these files. Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22octeontx2-af: Fix CPT AF register offset calculationBharat Bhushan
Some CPT AF registers are per LF and others are global. Translation of PF/VF local LF slot number to actual LF slot number is required only for accessing perf LF registers. CPT AF global registers access do not require any LF slot number. Also, there is no reason CPT PF/VF to know actual lf's register offset. Without this fix microcode loading will fail, VFs cannot be created and hardware is not usable. Fixes: bc35e28af789 ("octeontx2-af: replace cpt slot with lf id on reg write") Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211FSava Jakovljev
The current implementation incorrectly sets the mode bit of the PHY chip. Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the configuration nibble of a LED- it should be set independently of the index of the LED being configured. As a consequence, the RTL8211F LED control is actually operating in Mode A. Fix the error by or-ing final register value to write with a const-value of RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly. Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F") Signed-off-by: Sava Jakovljev <savaj@meyersound.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COM Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22net: ngbe: Fix phy mode set to external phyMengyuan Lou
The MAC only has add the TX delay and it can not be modified. MAC and PHY are both set the TX delay cause transmission problems. So just disable TX delay in PHY, when use rgmii to attach to external phy, set PHY_INTERFACE_MODE_RGMII_RXID to phy drivers. And it is does not matter to internal phy. Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink") Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Cc: stable@vger.kernel.org # 6.3+ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E6759CF1387CF84C+20240820030425.93003-1-mengyuanlou@net-swift.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-22netfilter: flowtable: validate vlan headerPablo Neira Ayuso
Ensure there is sufficient room to access the protocol field of the VLAN header, validate it once before the flowtable lookup. ===================================================== BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5440 [inline] Fixes: 4cd91f7c290f ("netfilter: flowtable: add vlan support") Reported-by: syzbot+8407d9bb88cd4c6bf61a@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-08-21Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-20 (ice) This series contains updates to ice driver only. Maciej fixes issues with Rx data path on architectures with PAGE_SIZE >= 8192; correcting page reuse usage and calculations for last offset and truesize. Michal corrects assignment of devlink port number to use PF id. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: use internal pf id instead of function number ice: fix truesize operations for PAGE_SIZE >= 8192 ice: fix ICE_LAST_OFFSET formula ice: fix page reuse when PAGE_SIZE is over 8k ==================== Link: https://patch.msgid.link/20240820215620.1245310-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21bnxt_en: Fix double DMA unmapping for XDP_REDIRECTSomnath Kotur
Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT code path. This should have been removed when we let the page pool handle the DMA mapping. This bug causes the warning: WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100 CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024 RIP: 0010:iommu_dma_unmap_page+0xd5/0x100 Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000 R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0 ? show_regs+0x6d/0x80 ? __warn+0x89/0x150 ? iommu_dma_unmap_page+0xd5/0x100 ? report_bug+0x16a/0x190 ? handle_bug+0x51/0xa0 ? exc_invalid_op+0x18/0x80 ? iommu_dma_unmap_page+0xd5/0x100 ? iommu_dma_unmap_page+0x35/0x100 dma_unmap_page_attrs+0x55/0x220 ? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f bnxt_rx_xdp+0x237/0x520 [bnxt_en] bnxt_rx_pkt+0x640/0xdd0 [bnxt_en] __bnxt_poll_work+0x1a1/0x3d0 [bnxt_en] bnxt_poll+0xaa/0x1e0 [bnxt_en] __napi_poll+0x33/0x1e0 net_rx_action+0x18a/0x2f0 Fixes: 578fcfd26e2a ("bnxt_en: Let the page pool manage the DMA mapping") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240820203415.168178-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21Merge branch 'ipv6-fix-possible-uaf-in-output-paths'Jakub Kicinski
Eric Dumazet says: ==================== ipv6: fix possible UAF in output paths First patch fixes an issue spotted by syzbot, and the two other patches fix error paths after skb_expand_head() adoption. ==================== Link: https://patch.msgid.link/20240820160859.3786976-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21ipv6: prevent possible UAF in ip6_xmit()Eric Dumazet
If skb_expand_head() returns NULL, skb has been freed and the associated dst/idev could also have been freed. We must use rcu_read_lock() to prevent a possible UAF. Fixes: 0c9f227bee11 ("ipv6: use skb_expand_head in ip6_xmit") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vasily Averin <vasily.averin@linux.dev> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240820160859.3786976-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21ipv6: fix possible UAF in ip6_finish_output2()Eric Dumazet
If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive. Fixes: 5796015fa968 ("ipv6: allocate enough headroom in ip6_finish_output2()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vasily Averin <vasily.averin@linux.dev> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240820160859.3786976-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21ipv6: prevent UAF in ip6_send_skb()Eric Dumazet
syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 </TASK> Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2843 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 Last potentially related work creation: kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541 __call_rcu_common kernel/rcu/tree.c:3106 [inline] call_rcu+0x167/0xa70 kernel/rcu/tree.c:3210 refdst_drop include/net/dst.h:263 [inline] skb_dst_drop include/net/dst.h:275 [inline] nf_ct_frag6_queue net/ipv6/netfilter/nf_conntrack_reasm.c:306 [inline] nf_ct_frag6_gather+0xb9a/0x2080 net/ipv6/netfilter/nf_conntrack_reasm.c:485 ipv6_defrag+0x2c8/0x3c0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:67 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip6_local_out+0x6fa/0x800 net/ipv6/output_core.c:143 ip6_local_out+0x26/0x70 net/ipv6/output_core.c:153 ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1959 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 Fixes: 0625491493d9 ("ipv6: ip6_push_pending_frames() should increment IPSTATS_MIB_OUTDISCARDS") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240820160859.3786976-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21netpoll: do not export netpoll_poll_[disable|enable]()Eric Dumazet
netpoll_poll_disable() and netpoll_poll_enable() are only used from core networking code, there is no need to export them. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240820162053.3870927-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct pathIdo Schimmel
Source the ethtool library from the correct path and avoid the following error: ./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory Fixes: 40d269c000bd ("selftests: forwarding: Move several selftests") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/2112faff02e536e1ac14beb4c2be09c9574b90ae.1724150067.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21udp: fix receiving fraglist GSO packetsFelix Fietkau
When assembling fraglist GSO packets, udp4_gro_complete does not set skb->csum_start, which makes the extra validation in __udp_gso_segment fail. Fixes: 89add40066f9 ("net: drop bad gso csum_start and offset in virtio_net_hdr") Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240819150621.59833-1-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22Merge tag 'platform-drivers-x86-v6.11-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - ISST: Fix an error-handling corner case - platform/surface: aggregator: Minor corner case fix and new HW support * tag 'platform-drivers-x86-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: ISST: Fix return value on last invalid resource platform/surface: aggregator: Fix warning when controller is destroyed in probe platform/surface: aggregator_registry: Add support for Surface Laptop 6 platform/surface: aggregator_registry: Add fan and thermal sensor support for Surface Laptop 5 platform/surface: aggregator_registry: Add support for Surface Laptop Studio 2 platform/surface: aggregator_registry: Add support for Surface Laptop Go 3 platform/surface: aggregator_registry: Add Support for Surface Pro 10 platform/x86: asus-wmi: Add quirk for ROG Ally X
2024-08-22Merge tag 'erofs-for-6.11-rc5-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: "As I mentioned in the merge window pull request, there is a regression which could cause system hang due to page migration. The corresponding fix landed upstream through MM tree last week (commit 2e6506e1c4ee: "mm/migrate: fix deadlock in migrate_pages_batch() on large folios"), therefore large folios can be safely allowed for compressed inodes and stress tests have been running on my fleet for over 20 days without any regression. Users have explicitly requested this for months, so let's allow large folios for EROFS full cases now for wider testing. Additionally, there is a fix which addresses invalid memory accesses on a failure path triggered by fault injection and two minor cleanups to simplify the codebase. Summary: - Allow large folios on compressed inodes - Fix invalid memory accesses if z_erofs_gbuf_growsize() partially fails - Two minor cleanups" * tag 'erofs-for-6.11-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails erofs: allow large folios for compressed files erofs: get rid of check_layout_compatibility() erofs: simplify readdir operation
2024-08-20Merge tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: - important reconnect fix - fix for memcpy issues on mount - two minor cleanup patches * tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbd: ksmbd: Replace one-element arrays with flexible-array members ksmbd: fix spelling mistakes in documentation ksmbd: fix race condition between destroy_previous_session() and smb2 operations() ksmbd: Use unsafe_memcpy() for ntlm_negotiate
2024-08-20Merge branch 'mptcp-pm-fix-ids-not-being-reusable'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: pm: fix IDs not being reusable Here are more fixes for the MPTCP in-kernel path-manager. In this series, the fixes are around the endpoint IDs not being reusable for on-going connections when re-creating endpoints with previously used IDs. - Patch 1 fixes this case for endpoints being used to send ADD_ADDR. Patch 2 validates this fix. The issue is present since v5.10. - Patch 3 fixes this case for endpoints being used to establish new subflows. Patch 4 validates this fix. The issue is present since v5.10. - Patch 5 fixes this case when all endpoints are flushed. Patch 6 validates this fix. The issue is present since v5.13. - Patch 7 removes a helper that is confusing, and introduced in v5.10. It helps simplifying the next patches. - Patch 8 makes sure a 'subflow' counter is only decremented when removing a 'subflow' endpoint. Can be backported up to v5.13. - Patch 9 is similar, but for a 'signal' counter. Can be backported up to v5.10. - Patch 10 checks the last max accepted ADD_ADDR limit before accepting new ADD_ADDR. For v5.10 as well. - Patch 11 removes a wrong restriction for the userspace PM, added during a refactoring in v6.5. - Patch 12 makes sure the fullmesh mode sets the ID 0 when a new subflow using the source address of the initial subflow is created. Patch 13 covers this case. This issue is present since v5.15. - Patch 14 avoid possible UaF when selecting an address from the endpoints list. ==================== Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-0-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: avoid possible UaF when selecting endpMatthieu Baerts (NGI0)
select_local_address() and select_signal_address() both select an endpoint entry from the list inside an RCU protected section, but return a reference to it, to be read later on. If the entry is dereferenced after the RCU unlock, reading info could cause a Use-after-Free. A simple solution is to copy the required info while inside the RCU protected section to avoid any risk of UaF later. The address ID might need to be modified later to handle the ID0 case later, so a copy seems OK to deal with. Reported-by: Paolo Abeni <pabeni@redhat.com> Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20selftests: mptcp: join: validate fullmesh endp on 1st sfMatthieu Baerts (NGI0)
This case was not covered, and the wrong ID was set before the previous commit. The rest is not modified, it is just that it will increase the code coverage. The right address ID can be verified by looking at the packet traces. We could automate that using Netfilter with some cBPF code for example, but that's always a bit cryptic. Packetdrill seems better fitted for that. Fixes: 4f49d63352da ("selftests: mptcp: add fullmesh testcases") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-13-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: fullmesh: select the right ID laterMatthieu Baerts (NGI0)
When reacting upon the reception of an ADD_ADDR, the in-kernel PM first looks for fullmesh endpoints. If there are some, it will pick them, using their entry ID. It should set the ID 0 when using the endpoint corresponding to the initial subflow, it is a special case imposed by the MPTCP specs. Note that msk->mpc_endpoint_id might not be set when receiving the first ADD_ADDR from the server. So better to compare the addresses. Fixes: 1a0d6136c5f0 ("mptcp: local addresses fullmesh") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-12-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: only in-kernel cannot have entries with ID 0Matthieu Baerts (NGI0)
The ID 0 is specific per MPTCP connections. The per netns entries cannot have this special ID 0 then. But that's different for the userspace PM where the entries are per connection, they can then use this special ID 0. Fixes: f40be0db0b76 ("mptcp: unify pm get_flags_and_ifindex_by_id") Cc: stable@vger.kernel.org Acked-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-11-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: check add_addr_accept_max before accepting new ADD_ADDRMatthieu Baerts (NGI0)
The limits might have changed in between, it is best to check them before accepting new ADD_ADDR. Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-10-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: only decrement add_addr_accepted for MPJ reqMatthieu Baerts (NGI0)
Adding the following warning ... WARN_ON_ONCE(msk->pm.add_addr_accepted == 0) ... before decrementing the add_addr_accepted counter helped to find a bug when running the "remove single subflow" subtest from the mptcp_join.sh selftest. Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the subflow closure. Before this patch, and upon the reception of the RM_ADDR, the other peer will then try to decrement this add_addr_accepted. That's not correct because the attached subflows have not been created upon the reception of an ADD_ADDR. A way to solve that is to decrement the counter only if the attached subflow was an MP_JOIN to a remote id that was not 0, and initiated by the host receiving the RM_ADDR. Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-9-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: only mark 'subflow' endp as availableMatthieu Baerts (NGI0)
Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before. Fixes: 06faa2271034 ("mptcp: remove multi addresses and subflows in PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-8-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: remove mptcp_pm_remove_subflow()Matthieu Baerts (NGI0)
This helper is confusing. It is in pm.c, but it is specific to the in-kernel PM and it cannot be used by the userspace one. Also, it simply calls one in-kernel specific function with the PM lock, while the similar mptcp_pm_remove_addr() helper requires the PM lock. What's left is the pr_debug(), which is not that useful, because a similar one is present in the only function called by this helper: mptcp_pm_nl_rm_subflow_received() After these modifications, this helper can be marked as 'static', and the lock can be taken only once in mptcp_pm_flush_addrs_and_subflows(). Note that it is not a bug fix, but it will help backporting the following commits. Fixes: 0ee4261a3681 ("mptcp: implement mptcp_pm_remove_subflow") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-7-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20selftests: mptcp: join: test for flush/re-add endpointsMatthieu Baerts (NGI0)
After having flushed endpoints that didn't cause the creation of new subflows, it is important to check endpoints can be re-created, re-using previously used IDs. Before the previous commit, the client would not have been able to re-create the subflow that was previously rejected. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 06faa2271034 ("mptcp: remove multi addresses and subflows in PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-6-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: re-using ID of unused flushed subflowsMatthieu Baerts (NGI0)
If no subflows are attached to the 'subflow' endpoints that are being flushed, the corresponding addr IDs will not be marked as available again. Mark all ID as being available when flushing all the 'subflow' endpoints, and reset local_addr_used counter to cover these cases. Note that mptcp_pm_remove_addrs_and_subflows() helper is only called for flushing operations, not to remove a specific set of addresses and subflows. Fixes: 06faa2271034 ("mptcp: remove multi addresses and subflows in PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-5-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20selftests: mptcp: join: check re-using ID of closed subflowMatthieu Baerts (NGI0)
This test extends "delete and re-add" to validate the previous commit. A new 'subflow' endpoint is added, but the subflow request will be rejected. The result is that no subflow will be established from this address. Later, the endpoint is removed and re-added after having cleared the firewall rule. Before the previous commit, the client would not have been able to create this new subflow. While at it, extra checks have been added to validate the expected numbers of MPJ and RM_ADDR. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-4-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: re-using ID of unused removed subflowsMatthieu Baerts (NGI0)
If no subflow is attached to the 'subflow' endpoint that is being removed, the addr ID will not be marked as available again. Mark the linked ID as available when removing the 'subflow' endpoint if no subflow is attached to it. While at it, the local_addr_used counter is decremented if the ID was marked as being used to reflect the reality, but also to allow adding new endpoints after that. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-3-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20selftests: mptcp: join: check re-using ID of unused ADD_ADDRMatthieu Baerts (NGI0)
This test extends "delete re-add signal" to validate the previous commit. An extra address is announced by the server, but this address cannot be used by the client. The result is that no subflow will be established to this address. Later, the server will delete this extra endpoint, and set a new one, with a valid address, but re-using the same ID. Before the previous commit, the server would not have been able to announce this new address. While at it, extra checks have been added to validate the expected numbers of MPJ, ADD_ADDR and RM_ADDR. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-2-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: re-using ID of unused removed ADD_ADDRMatthieu Baerts (NGI0)
If no subflow is attached to the 'signal' endpoint that is being removed, the addr ID will not be marked as available again. Mark the linked ID as available when removing the address entry from the list to cover this case. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-1-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 11:27:42 +0000