summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-23backlight: pwm_bl: Simplify usage of devm_gpiod_get_optionalAxel Lin
Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions), the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Simplify the usage of devm_gpiod_get_optional accordingly. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-23backlight: lp855x: Don't clear level on suspend/blankSean Paul
Don't clear the backlight level when we're going into suspend or blanking. Instead, just temporarily set the level to 0 so we retain the value when we resume. Reported-by: Benson Leung <bleung@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Stephen Barber <smbarber@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Acked-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-23backlight: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-23video: backlight: da9052: Constify platform_device_idKrzysztof Kozlowski
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-23gpio-backlight: Discover driver during boot timeArun Bharadwaj
The gpio-backlight driver seems to be missing the MODULE_DEVICE_TABLE line which is preventing it from being modprobed during boot time even if the gpio-backlight device exists. This seems to be a bug and this patch attempts to fix that. Signed-off-by: Arun Bharadwaj <arun@gumstix.com> Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-23Merge branch 'xgene-next'David S. Miller
Suman Tripathi says: ==================== drivers: net: xgene: Fix the ACPI support for RGMII/SGMII0/XFI ethernet interfaces of APM X-Gene SoC. ==================== Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers: net: xgene: Check for IS_ERR rather than NULL for clock.Suman Tripathi
This patches fixes the code to check for IS_ERR rather than NULL for clock interface. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers: net: xgene: Add ACPI support for SGMII0 and XFI1 interface of 2nd ↵Suman Tripathi
H/W version of APM X-Gene SoC ethernet controller. This patch adds the ACPI support for SGMII0 and XFI1 interface of 2nd H/W version of APM X-Gene SoC ethernet controller. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers: net: xgene: Implement the backward compatibility with the old and ↵Suman Tripathi
new firmware w.r.t Tx completion IRQ interrupt. This patch implements the backward compatibility with the old firmware where the Tx completion IRQ interrupt was absent whereas incase of new firmware the Tx completion IRQ interrupt is present. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers: net: xgene: Fix the ACPI support for RGMII/SGMII0/XFI interface of ↵Suman Tripathi
APM X-Gene SoC ethernet controller. This patch implements couple of fixes to support ACPI for RGMII/SGMII0/XFI interface of APM X-Gene SoC ethernet controller driver. This patch uses the _SUN acpi object to fetch the port-id information whereas the FDT uses port-id binding for port-id information. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23NET: Add ezchip ethernet driverNoam Camus
Simple LAN device for debug or management purposes. Device supports interrupts for RX and TX(completion). Device does not have DMA ability. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Tal Zilcer <talz@ezchip.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23rocker: call correct unregister function on errorGilad Ben-Yossef
Use the correct unregister function matching the register function on the error path. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Fixes: c1beeef7a32a791a ("rocker: implement IPv4 fib offloading") Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23net: fec: init MAC prior to mii bus probeNimrod Andy
Below case causes mii bus probe failed: ifconfig eth0 down -> suspend/resume with Mega/fax mix off -> ifconfig eth0 up In i.MX6SX/i.MX7D chip, Mega/fast mix off feature is supported that means most of SOC power will be off including ENET MAC for power saving. Once ENET MAC power off, all initialized MAC registers reset to default, so in the case, it must init MAC prior to mii bus probe. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dcb : Fix incorrect documentation for struct dcb_appAnish Bhatt
While IEEE and CEE use the same structure to store apps, the selector and priority fields for both are different. Only the priority field is explained, add documentation explaining how the selector field differs for both. cgdcbxd code shows an example of how selector fields differ. Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23switchdev: change BUG_ON to WARN for attr set failure caseScott Feldman
This particular BUG_ON condition was checking for attr set err in the COMMIT phase, which isn't expected (it's a driver bug if PREPARE phase is OK but COMMIT fails). But BUG_ON() is too strong for this case, so change to WARN(). BUG_ON() would be warranted if the system was corrupted beyond repair, but this is not the case here. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23Merge branch 'switchdev-vlan'David S. Miller
Scott Feldman says: ==================== switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23switchdev; add VLAN support for port's bridge_getlinkScott Feldman
One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23switchdev: rename vlan vid_start to vid_beginScott Feldman
Use vid_begin/end to be consistent with BRIDGE_VLAN_INFO_RANGE_BEGIN/END. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23packet: remove handling of tx_ringManinder Singh
Remove handling of tx_ring in prb_setup_retire_blk_timer for TPACKET_V3 because init_prb_bdqc is called only for zero tx_ring and thus prb_setup_retire_blk_timer for zero tx_ring only. And also in functon init_prb_bdqc there is no usage of tx_ring. Thus removing tx_ring from init_prb_bdqc. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Suggested-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23Merge branch 'stmmac-rk3368'David S. Miller
Heiko Stuebner says: ==================== net: stmmac: dwmac-rk: add support for rk3368 Apart from small cleanups, this series provides support for the dwmac on the new rk3368 ARM64 soc. Tested on a R88 board using a RMII phy. Changes since v1: - Adapt to changes resulting from patch d42202dce002 ("net: stmmac: dwmac-rk: Don't add function name in info or err messages") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23net: stmmac: dwmac-rk: add rk3368-specific dataHeiko Stübner
Add constants and callback functions for the dwmac on rk3368 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23net: stmmac: dwmac-rk: abstract access to mac settings in GRFHeiko Stübner
The mac settings like RGMII/RMII, speeds etc are done in the so called "General Register Files", contain numerous other settings as well and always seem to change between Rockchip SoCs. Therefore abstract the register accesses into a per-soc ops struct to make this reusable on other Rockchip SoCs. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23net: stmmac: dwmac-rk: Fix clk rate when provided by socHeiko Stübner
The first iteration of the dwmac-rk support did access an intermediate clock directly below the pll selector. This was removed in a subsequent revision, but the clock and one invocation remained. This results in the driver trying to set the rate of a non-existent clock when the soc and not some external source provides the phy clock for RMII phys. So set the rate of the correct clock and remove the remaining now completely unused definition. Fixes: 436f5ae08f9d ("GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC") Cc: stable@vger.kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23net: stmmac: dwmac-rk: remove unused gpio register definesHeiko Stübner
In a first version the driver did want to do some gpio wiggling, which of course never made it into the kernel, but somehow these register defines where forgotten. Remove them, as they shouldn't be here. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23Merge tag 'linux-can-fixes-for-4.1-20150621' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== Oliver Hartkopp fixed a bug in the generic CAN frame handling code, which may lead to loss of CAN frames. It was introduced during v4.1 development. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> gpg: Signature made Sun 21 Jun 2015 09:59:36 AM PDT using RSA key ID C9B5CFC7
2015-06-23net: fs_enet: Fix NETIF_F_SG feature for Freescale MPC5121Alexander Popov
Commit 4fc9b87bae25 ("net: fs_enet: Implement NETIF_F_SG feature") brings a trouble to Freescale MPC512x: a kernel oops happens during sending non-linear sk_buff with .data not aligned by 4. Log quotation: Unable to handle kernel paging request for data at address 0xe467c000 Faulting instruction address: 0xc000cd44 Oops: Kernel access of bad area, sig: 11 [#1] MPC512x generic Modules linked in: CPU: 0 PID: 984 Comm: kworker/0:1H Not tainted 4.1.0-rc8-00024-gbb16140 #2 Workqueue: rpciod rpc_async_schedule task: cf364a50 ti: cf362000 task.ti: cf362000 NIP: c000cd44 LR: c000c720 CTR: 00000206 REGS: cf363ac0 TRAP: 0300 Not tainted (4.1.0-rc8-00024-gbb16140) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 42004082 XER: 00000000 DAR: e467c000 DSISR: 20000000 GPR00: c0279e24 cf363b70 cf364a50 e467c000 00000206 0000001f 00000001 00000001 GPR08: 00000000 e467c000 e46800be 000139a6 82002082 00000000 c002e46c cf3c3680 GPR16: c044cb30 c04b0000 cf363c48 00000000 00000001 fde0315c 00000000 0000000b GPR24: 0000002c 000040be cf339aa0 0000000b 00000001 cf873210 00282f85 00000000 NIP [c000cd44] clean_dcache_range+0x1c/0x30 LR [c000c720] dma_direct_map_page+0x40/0x94 Call Trace: [cf363b70] [cf339b60] 0xcf339b60 (unreliable) [cf363b90] [c0279e24] fs_enet_start_xmit+0x1c8/0x42c [cf363bd0] [c02ff710] dev_hard_start_xmit+0x2dc/0x3d4 [cf363c40] [c0319c60] sch_direct_xmit+0xcc/0x1cc [cf363c70] [c02ff9c0] __dev_queue_xmit+0x1b8/0x47c [cf363ca0] [c032a3e8] ip_finish_output+0x1fc/0x9a8 [cf363ce0] [c032c31c] ip_send_skb+0x1c/0xa4 [cf363cf0] [c035112c] udp_send_skb+0xe4/0x2e8 [cf363d10] [c0351368] udp_push_pending_frames+0x38/0x84 [cf363d20] [c03537b8] udp_sendpage+0x134/0x174 [cf363d70] [c0384fd4] xs_sendpages+0x21c/0x250 [cf363db0] [c03852bc] xs_udp_send_request+0x50/0xf8 [cf363de0] [c0382f08] xprt_transmit+0x64/0x280 [cf363e20] [c038017c] call_transmit+0x168/0x234 [cf363e40] [c0387918] __rpc_execute+0x88/0x2b0 [cf363e80] [c00296f8] process_one_work+0x124/0x2fc [cf363ea0] [c0029a00] worker_thread+0x130/0x480 [cf363ef0] [c002e528] kthread+0xbc/0xd0 [cf363f40] [c000e4a8] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 7c70faa6 60630800 7c70fba6 4c00012c 4e800020 38a0001f 7c632878 7c832050 7c842a14 5484d97f 4d820020 7c8903a6 <7c00186c> 38630020 4200fff8 7c0004ac ---[ end trace c846c1eceb513c85 ]--- The reason: MPC5121 FEC requires 4-byte alignment for TX data buffer and calls tx_skb_align_workaround() for copying sk_buff with not aligned .data to a new sk_buff with aligned one. But tx_skb_align_workaround() uses skb_copy_from_linear_data() which doesn't work for non-linear sk_buff: a new sk_buff has non-zero nr_frags and zero .data_len. So improve the condition of calling tx_skb_align_workaround() and use skb_linearize() in it. Signed-off-by: Alexander Popov <alex.popov@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88x6xxx: Zero statistics countersAndrew Lunn
Zero the statistics counters when setting up the global registers. Otherwise the counters will remain from the last boot if the power has not been removed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23Merge branch 'dsa-mv88e6xxx-debugfs'David S. Miller
Andrew Lunn says: ==================== debugfs for mv88e6xxx This patchset adds some debugfs files for seeing into a mv88e6xxx family of switch chips. DB T/P Vec State Addr 003 Port 008 7 00:22:02:00:18:44 003 Port 008 6 80:ee:73:83:60:27 005 Port 020 7 94:10:3e:80:bc:f3 0f8 Port 001 6 8e:25:13:53:44:de This walks all possible entries, so is a bit slow, but is always correct. Target Port 0 15 1 15 2 15 3 15 4 15 5 15 6 15 7 15 8 15 9 15 -->snip<-- 31 15 A rather boring example, since i only have one switch here. But this shows the routing between multiple switches. GLOBAL GLOBAL2 0 1 2 3 4 5 6 0: c804 0 1e4f 100f 100f 1e4f 1e0f e07 e07 1: fe 0 3 3 3 3 3 c03e c03f 2: 0 ffff 0 0 0 0 0 0 0 3: 0 ffff 1721 1721 1721 1721 1721 1721 1721 4: 6000 258 433 431 431 433 433 373f 433 5: 0 ff 0 0 0 0 0 0 0 6: c000 1f0f 2026 2025 2023 3020 4020 501f 6020 7: 0 707f 0 0 0 0 0 0 0 8: 0 7800 2080 2080 2080 2080 2080 2080 2080 9: 0 1600 1 1 1 1 1 1 1 a: 148 0 0 0 0 0 0 0 0 b: 4000 1000 1 2 4 8 10 20 40 c: 0 7f 0 0 0 0 0 0 0 d: ffff 5f3 0 0 0 0 0 0 0 e: ffff 6 0 0 0 0 0 0 0 f: ffff f00 dada dada dada dada dada dada dada 10: 0 0 0 0 0 0 0 0 0 11: 0 0 0 0 0 0 0 0 0 12: 5555 0 0 0 0 0 0 0 0 13: 5555 0 1a 0 0 1df0 0 1e07 0 14: aaaa 400 0 0 0 0 0 0 0 15: aaaa 0 0 0 0 0 0 0 0 16: ffff 0 6011 6011 6011 6011 33 33 0 17: ffff 0 0 0 0 0 0 0 0 18: fa41 1844 3210 3210 3210 3210 3210 3210 3210 19: 0 1e1 7654 7654 7654 7654 7654 7654 7654 1a: 5550 0 0 0 0 0 0 0 0 1b: 1fb f869 8000 8000 8000 8000 8000 8000 8000 1c: 0 0 0 0 0 0 0 0 0 1d: c00 0 0 0 0 0 0 0 0 1e: 0 0 0 0 0 0 0 0 0 1f: 0 0 0 0 0 0 0 0 0 All the switch registers which are directly accessible. Statistic Port 0 Port 1 Port 2 Port 3 Port 4 Port 5 Port 6 in_good_octets: 2176 0 0 4263711 0 499540 0 in_bad_octets: 46050 0 0 50196 0 0 0 in_unicast: 0 0 0 7693 0 7691 0 in_broadcasts: 0 0 0 0 0 3 0 in_multicasts: 34 0 0 0 0 27 0 in_pause: 0 0 0 0 0 0 0 in_undersize: 0 0 0 0 0 0 0 in_fragments: 45 0 0 2 0 0 0 in_oversize: 0 0 0 0 0 0 0 in_jabber: 0 0 0 0 0 0 0 in_rx_error: 0 0 0 0 0 0 0 in_fcs_error: 159 0 0 37 0 0 0 out_octets: 808 0 0 496608 336 4267159 0 out_unicast: 0 0 0 7691 0 7693 0 out_broadcasts: 1 0 0 3 0 0 0 out_multicasts: 9 0 0 6 4 34 0 out_pause: 0 0 0 0 0 0 0 excessive: 0 0 0 0 0 0 0 collisions: 0 0 0 0 0 0 0 deferred: 0 0 0 0 0 0 0 single: 0 0 0 0 0 0 0 multiple: 0 0 0 0 0 0 0 out_fcs_error: 0 0 0 0 0 0 0 late: 0 0 0 0 0 0 0 hist_64bytes: 36 0 0 7577 0 7574 0 hist_65_127bytes: 53 0 0 241 4 298 0 hist_128_255bytes: 50 0 0 12 0 10 0 hist_256_511bytes: 43 0 0 8 0 2 0 hist_512_1023bytes: 18 0 0 7573 0 7564 0 hist_1024_max_bytes: 3 0 0 19 0 0 0 sw_in_discards: 0 0 0 0 0 0 0 sw_in_filtered: 0 0 0 0 0 0 0 sw_out_filtered: 34 0 0 7693 0 7721 0 Of particular interest here is that you get to see all ports, including the CPU port and any DSA ports. You cannot get statistics for these ports via ethtool. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88x6xxx: Add debugfs interface for scratch registersAndrew Lunn
Allow the contents of the scratch registers to be shown in debugfs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88x6xxx: Add debugfs interface for device mapAndrew Lunn
The device map is used to route packets between cascaded switches. Add dumping a switches device map via debugfs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88x6xxx: Add debugfs interface for statisticsAndrew Lunn
Allow the contents of the statistics counters to be shown in debugfs. This is particularly useful for the cpu and dsa ports, which cannot be seen using ethtools -S. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88x6xxx: Refactor getting a single statisticAndrew Lunn
Move the code to retrieve a statistics counter into a function of its own, so it can later be reused. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88e6xxx: Add debugfs interface for ATUAndrew Lunn
Dump the Address Translation Unit via a file in debugfs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88e6xxx: Add debugfs interface for registersAndrew Lunn
Allow the contents of the registers to be shown in debugfs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23vmxnet3: Changes for vmxnet3 adapter version 2 (fwd)Shreyas Bhatewara
Make the driver understand adapter version 2. Cc: Rachel Lunnon <rachel_lunnon@stormagic.com> Signed-off-by: Guolin Yang <gyang@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23vmxnet3: Fix memory leaks in rx path (fwd)Shreyas Bhatewara
If rcd length was zero, the page used for frag was not being released. It was being replaced with a newly allocated page. This change takes care of that memory leak. Signed-off-by: Guolin Yang <gyang@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23vmxnet3: Register shutdown handler for device (fwd)Shreyas Bhatewara
Implement a handler for pci shutdown so that the driver has an opportunity to make sure that device is quiesced before the PCI switches to legacy IRQs. This way the possibility of "screaming interrupt" is avoided. Acked-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23netfilter: nf_qeueue: Drop queue entries on nf_unregister_hookEric W. Biederman
Add code to nf_unregister_hook to flush the nf_queue when a hook is unregistered. This guarantees that the pointer that the nf_queue code retains into the nf_hook list will remain valid while a packet is queued. I tested what would happen if we do not flush queued packets and was trivially able to obtain the oops below. All that was required was to stop the nf_queue listening process, to delete all of the nf_tables, and to awaken the nf_queue listening process. > BUG: unable to handle kernel paging request at 0000000100000001 > IP: [<0000000100000001>] 0x100000001 > PGD b9c35067 PUD 0 > Oops: 0010 [#1] SMP > Modules linked in: > CPU: 0 PID: 519 Comm: lt-nfqnl_test Not tainted > task: ffff8800b9c8c050 ti: ffff8800ba9d8000 task.ti: ffff8800ba9d8000 > RIP: 0010:[<0000000100000001>] [<0000000100000001>] 0x100000001 > RSP: 0018:ffff8800ba9dba40 EFLAGS: 00010a16 > RAX: ffff8800bab48a00 RBX: ffff8800ba9dba90 RCX: ffff8800ba9dba90 > RDX: ffff8800b9c10128 RSI: ffff8800ba940900 RDI: ffff8800bab48a00 > RBP: ffff8800b9c10128 R08: ffffffff82976660 R09: ffff8800ba9dbb28 > R10: dead000000100100 R11: dead000000200200 R12: ffff8800ba940900 > R13: ffffffff8313fd50 R14: ffff8800b9c95200 R15: 0000000000000000 > FS: 00007fb91fc34700(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 0000000100000001 CR3: 00000000babfb000 CR4: 00000000000007f0 > Stack: > ffffffff8206ab0f ffffffff82982240 ffff8800bab48a00 ffff8800b9c100a8 > ffff8800b9c10100 0000000000000001 ffff8800ba940900 ffff8800b9c10128 > ffffffff8206bd65 ffff8800bfb0d5e0 ffff8800bab48a00 0000000000014dc0 > Call Trace: > [<ffffffff8206ab0f>] ? nf_iterate+0x4f/0xa0 > [<ffffffff8206bd65>] ? nf_reinject+0x125/0x190 > [<ffffffff8206dee5>] ? nfqnl_recv_verdict+0x255/0x360 > [<ffffffff81386290>] ? nla_parse+0x80/0xf0 > [<ffffffff8206c42c>] ? nfnetlink_rcv_msg+0x13c/0x240 > [<ffffffff811b2fec>] ? __memcg_kmem_get_cache+0x4c/0x150 > [<ffffffff8206c2f0>] ? nfnl_lock+0x20/0x20 > [<ffffffff82068159>] ? netlink_rcv_skb+0xa9/0xc0 > [<ffffffff820677bf>] ? netlink_unicast+0x12f/0x1c0 > [<ffffffff82067ade>] ? netlink_sendmsg+0x28e/0x650 > [<ffffffff81fdd814>] ? sock_sendmsg+0x44/0x50 > [<ffffffff81fde07b>] ? ___sys_sendmsg+0x2ab/0x2c0 > [<ffffffff810e8f73>] ? __wake_up+0x43/0x70 > [<ffffffff8141a134>] ? tty_write+0x1c4/0x2a0 > [<ffffffff81fde9f4>] ? __sys_sendmsg+0x44/0x80 > [<ffffffff823ff8d7>] ? system_call_fastpath+0x12/0x6a > Code: Bad RIP value. > RIP [<0000000100000001>] 0x100000001 > RSP <ffff8800ba9dba40> > CR2: 0000000100000001 > ---[ end trace 08eb65d42362793f ]--- Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23netfilter: nftables: Do not run chains in the wrong network namespaceEric W. Biederman
Currenlty nf_tables chains added in one network namespace are being run in all network namespace. The issues are myriad with the simplest being an unprivileged user can cause any network packets to be dropped. Address this by simply not running nf_tables chains in the wrong network namespace. Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23macvtap: Increase limit of macvtap queuesPankaj Gupta
Macvtap should be compatible with tuntap for maximum number of queues. commit 'baf71c5c1f80d82e92924050a60b5baaf97e3094 (tuntap: Increase the number of queues in tun.)' removes the limitations and increases number of queues in tuntap. Now, Its safe to increase number of queues in Macvtap as well. This patch also modifies 'macvtap_del_queues' function to avoid extra memory allocation in stack. Changes from v1->v2 : Michael S. Tsirkin, Jason Wang : Better way to use linked list to avoid use of extra memory in stack. Sergei Shtylyov : Specify dependent commit's summary. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23bpf: BPF based latency tracingDaniel Wagner
BPF offers another way to generate latency histograms. We attach kprobes at trace_preempt_off and trace_preempt_on and calculate the time it takes to from seeing the off/on transition. The first array is used to store the start time stamp. The key is the CPU id. The second array stores the log2(time diff). We need to use static allocation here (array and not hash tables). The kprobes hooking into trace_preempt_on|off should not calling any dynamic memory allocation or free path. We need to avoid recursivly getting called. Besides that, it reduces jitter in the measurement. CPU 0 latency : count distribution 1 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 0 | | 32 -> 63 : 0 | | 64 -> 127 : 0 | | 128 -> 255 : 0 | | 256 -> 511 : 0 | | 512 -> 1023 : 0 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 166723 |*************************************** | 4096 -> 8191 : 19870 |*** | 8192 -> 16383 : 6324 | | 16384 -> 32767 : 1098 | | 32768 -> 65535 : 190 | | 65536 -> 131071 : 179 | | 131072 -> 262143 : 18 | | 262144 -> 524287 : 4 | | 524288 -> 1048575 : 1363 | | CPU 1 latency : count distribution 1 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 0 | | 32 -> 63 : 0 | | 64 -> 127 : 0 | | 128 -> 255 : 0 | | 256 -> 511 : 0 | | 512 -> 1023 : 0 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 114042 |*************************************** | 4096 -> 8191 : 9587 |** | 8192 -> 16383 : 4140 | | 16384 -> 32767 : 673 | | 32768 -> 65535 : 179 | | 65536 -> 131071 : 29 | | 131072 -> 262143 : 4 | | 262144 -> 524287 : 1 | | 524288 -> 1048575 : 364 | | CPU 2 latency : count distribution 1 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 0 | | 32 -> 63 : 0 | | 64 -> 127 : 0 | | 128 -> 255 : 0 | | 256 -> 511 : 0 | | 512 -> 1023 : 0 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 40147 |*************************************** | 4096 -> 8191 : 2300 |* | 8192 -> 16383 : 828 | | 16384 -> 32767 : 178 | | 32768 -> 65535 : 59 | | 65536 -> 131071 : 2 | | 131072 -> 262143 : 0 | | 262144 -> 524287 : 1 | | 524288 -> 1048575 : 174 | | CPU 3 latency : count distribution 1 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 0 | | 32 -> 63 : 0 | | 64 -> 127 : 0 | | 128 -> 255 : 0 | | 256 -> 511 : 0 | | 512 -> 1023 : 0 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 29626 |*************************************** | 4096 -> 8191 : 2704 |** | 8192 -> 16383 : 1090 | | 16384 -> 32767 : 160 | | 32768 -> 65535 : 72 | | 65536 -> 131071 : 32 | | 131072 -> 262143 : 26 | | 262144 -> 524287 : 12 | | 524288 -> 1048575 : 298 | | All this is based on the trace3 examples written by Alexei Starovoitov <ast@plumgrid.com>. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23doc:md: fix typo in md.txt.Wei Fang
Signed-off-by: Wei Fang <fangwei1@huawei.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-06-23KVM: x86/vPMU: Enable PMU handling for AMD PERFCTRn and EVNTSELn MSRsWei Huang
This patch enables AMD guest VM to access (R/W) PMU related MSRs, which include PERFCTR[0..3] and EVNTSEL[0..3]. Reviewed-by: Joerg Roedel <jroedel@suse.de> Tested-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-23KVM: x86/vPMU: Implement AMD vPMU code for KVMWei Huang
This patch replaces the empty AMD vPMU functions (in pmu_amd.c) with real implementation. Reviewed-by: Joerg Roedel <jroedel@suse.de> Tested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-23KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatchWei Huang
This patch defines a new function pointer struct (kvm_pmu_ops) to support vPMU for both Intel and AMD. The functions pointers defined in this new struct will be linked with Intel and AMD functions later. In the meanwhile the struct that maps from event_sel bits to PERF_TYPE_HARDWARE events is renamed and moved from Intel specific code to kvm_host.h as a common struct. Reviewed-by: Joerg Roedel <jroedel@suse.de> Tested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-23KVM: x86/vPMU: introduce kvm_pmu_msr_idx_to_pmcWei Huang
This function will be part of the kvm_pmu_ops interface. Introduce it already. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-23xen-netback: fix a BUG() during initializationPalik, Imre
Commit edafc132baac ("xen-netback: making the bandwidth limiter runtime settable") introduced the capability to change the bandwidth rate limit at runtime. But it also introduced a possible crashing bug. If netback receives two XenbusStateConnected without getting the hotplug-status watch firing in between, then it will try to register the watches for the rate limiter again. But this triggers a BUG() in the watch registration code. The fix modifies connect() to remove the possibly existing packet-rate watches before trying to install those watches. This behaviour is in line with how connect() deals with the hotplug-status watch. Signed-off-by: Imre Palik <imrep@amazon.de> Cc: Matt Wilson <msw@amazon.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23bridge: multicast: restore router configuration on port link down/upSatish Ashok
When a port goes through a link down/up the multicast router configuration is not restored. Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 0909e11758bd ("bridge: Add multicast_router sysfs entries") Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23bridge: multicast: start querier timer when running user-space stpNikolay Aleksandrov
When STP is running in user-space and querier is configured, the querier timer is not started when a port goes to a non-blocking state. This patch unifies the user- and kernel-space stp multicast port enable path and enables it in all states different from blocking. Note that when a port goes in BR_STATE_DISABLED it's not enabled because that is handled in the beginning of the port list loop. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 16:02:48 +0000