| Age | Commit message (Collapse) | Author |
|---|
|
Use spi_get_device_match_data() helper to simplify a bit the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240606-spi-match-data-v1-2-320b291ee1fe@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use spi_get_device_match_data() helper to simplify a bit the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240606-spi-match-data-v1-1-320b291ee1fe@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240606155407.499344-1-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This patch adds support for the integrated on-chip heater that is present
on all the devices supported by this driver (si7020, si7021, si7013, th6).
In order to configure the heater, the driver interacts with the following
device registers:
* User Register - the 2nd bit of this register is a "Heater Enable bit"
(0 means that the heater is off, 1 means that it's on).
* Heater Register - this register is present only on the si70xx devices
and controls the current flowing through the heater. The 4 lower bits
of this register can be assigned values from 0x0 to 0xF.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://lore.kernel.org/r/20240607141029.51744-1-apokusinski@o2.pl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/adc/ingenic-adc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/adc/xilinx-ams.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/buffer/kfifo_buf.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240607-md-drivers-iic-v1-1-9f9db6246083@quicinc.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter). At the same time refactor
the NULL comparison.
This patch has no effect on runtime behavior.
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB7237D024459C314CECE72EAF8BFE2@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AXP192 is identical to the AXP20x, except for the addition of
two more GPIO ADC channels.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
TI tla2021 is a limited single-channel variant of tla2024 which is
similar enough to be easily supportable through the same driver.
Add compatible string for tla2021 so boards may describe it in
device-tree.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240602-cn9130-som-v6-3-89393e86d4c7@solid-run.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Make use of iio_device_claim_direct_scoped() to make error handling more
natural and simplify code.
Co-developed-by: Caio Dantas Simão Ugêda <caiodantas@usp.br>
Signed-off-by: Caio Dantas Simão Ugêda <caiodantas@usp.br>
Signed-off-by: Gustavo Ueti Fukunaga <gustavofukunaga@usp.br>
Link: https://lore.kernel.org/r/20240527091942.53616-1-gustavofukunaga@usp.br
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Allow using the mount-matrix device tree property to align the
accelerometer relative to the whole device.
Signed-off-by: Val Packett <val@packett.cool>
Link: https://lore.kernel.org/r/20240527080043.2709-1-val@packett.cool
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Some callbacks from iio_info structure are accessed without any check, so
if a driver doesn't implement them trying to access the corresponding
sysfs entries produce a kernel oops such as:
[ 2203.527791] Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute
[...]
[ 2203.783416] Call trace:
[ 2203.783429] iio_read_channel_info_avail from dev_attr_show+0x18/0x48
[ 2203.789807] dev_attr_show from sysfs_kf_seq_show+0x90/0x120
[ 2203.794181] sysfs_kf_seq_show from seq_read_iter+0xd0/0x4e4
[ 2203.798555] seq_read_iter from vfs_read+0x238/0x2a0
[ 2203.802236] vfs_read from ksys_read+0xa4/0xd4
[ 2203.805385] ksys_read from ret_fast_syscall+0x0/0x54
[ 2203.809135] Exception stack(0xe0badfa8 to 0xe0badff0)
[ 2203.812880] dfa0: 00000003 b6f10f80 00000003 b6eab000 00020000 00000000
[ 2203.819746] dfc0: 00000003 b6f10f80 7ff00000 00000003 00000003 00000000 00020000 00000000
[ 2203.826619] dfe0: b6e1bc88 bed80958 b6e1bc94 b6e1bcb0
[ 2203.830363] Code: bad PC value
[ 2203.832695] ---[ end trace 0000000000000000 ]---
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240530-iio-core-fix-segfault-v3-1-8b7cd2a03773@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This fixes a checkpatch warning by changing the struct attribute from __attribute__((__packed__)) to __packed.
Signed-off-by: Bruna Bispo <blbispo1@gmail.com>
Link: https://lore.kernel.org/r/20240528143816.13409-1-blbispo1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add documentation for adis16480 driver which describes the driver
device files and shows how the user may use the ABI for various
scenarios (configuration, measurement, etc.).
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240528142409.239187-7-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add documentation for IIO interfacing tools describing the available
tools which can be used to retrieve data from IIO sysfs.
Reference this documentation in adis16475.rst
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240528142409.239187-6-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADIS16545 and ADIS16547 are a complete inertial system that
includes a triaxis gyroscope and a triaxis accelerometer.
The serial peripheral interface (SPI) and register structure provide a
simple interface for data collection and configuration control.
These devices are similar to the ones already supported in the driver,
with changes in the scales, timings and the max spi speed in burst
mode.
Also, they support delta angle and delta velocity readings in burst
mode, for which support was added in the trigger handler.
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240528142409.239187-5-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add ADIS16545/47 compatibles. Each newly added device has a different
angular velocity/linear acceleration scale combination, as follows:
Accel dynamic range:
- 8g: ADIS16545
- 40g: ADIS16547
Gyro dynamic range:
- 125 deg/sec: ADIS1545-1, ADIS16547-1
- 450 deg/sec: ADIS1545-2, ADIS16547-2
- 2000 deg/sec: ADIS1545-3, ADIS16547-3
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240528142409.239187-4-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for delta angle and delta velocity raw readings to
adis16480 driver.
The following devices do not support delta readings in burst mode:
ADIS16375, ADIS16480, ADIS16485, ADIS16488, ADIS16490, ADIS16495-1,
ADIS16495-2, ADIS16495-3, ADIS16497-1, ADIS16497-2, ADIS16497-3, thus
they cannot be retrieved via the buffer interface.
For these devices, the delta measurements are retrieved by performing
normal register readings and are made available through the raw
attributes of the specific channels.
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240528142409.239187-3-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
With this, we can pass the maxixum spi burst speed to the
'ADIS16480_DATA()' macro. This is in preparation to support new devices
that have a different speed than the one used so far.
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240528142409.239187-2-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for ADIS1657X family devices in already exiting ADIS16475
driver.
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-10-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add ADIS1657X family devices compatibles and specify the according
maximum SPI baudrate.
Similarly to other ADIS1650X devices, ADIS1657X supports sync-mode
values [0,2].
Each newly added device has a different angular velocity/linear
acceleration/ delta velocity scale combination, as follows:
Accel dynamic range sensitivity:
- 262144000 LSB/g: ADIS16575
- 52428800 LSB/g: ADIS16576, ADIS16577
Gyro dynamic range sensitivity:
- 2621440 LSB/deg/sec: ADIS1575-2, ADIS1576-2, ADIS1577-2
- 655360 LSB/deg/sec: ADIS1575-3, ADIS1576-3, ADIS1577-3
Delta velocity sensitivity:
- 2^15/100 LSB/m/sec: ADIS16575
- 2^15/125 LSB/m/sec: ADIS16576
- 2^15/400 LSB/m/sec: ADIS16577
Each ADIS1657X device supports FIFO usage and a sample-rate of 4.1KHz,
meanwhile the already existing devices do not support FIFO usage and
have a maximum sample-rate of 2.1KHz.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-9-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Re-define ADIS16475_DATA such that it takes _burst_max_len,
_burst_max_speed_hz and _has_fifo as parameters.
Also, do a preparatory rename operation for ADIS16475_BURST32_MAX_DATA
to ADIS16475_BURST32_MAX_DATA_NO_TS32 to be able to differentiate in
the future between devices which are using 16-bit or 32-bit timestamp
size in burst mode.
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-8-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Currently, adis library allows configuration only for edge interrupts,
needed for data ready sampling.
This patch removes the restriction for level interrupts for devices
which have FIFO support.
Furthermore, in case of devices which have FIFO support,
devm_request_threaded_irq is used for interrupt allocation, to avoid
flooding the processor with the FIFO watermark level interrupt, which
is active until enough data has been read from the FIFO.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-7-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Currently adis16475 supports a sample rate between 1900 and 2100 Hz.
This patch changes the setting of sample rate from hardcoded values to
a generic computation based on the internal clock frequency.
This is a preparatory patch for adding support for adis1657x family
devices which allow sample rates between 3900 and 4100 Hz.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-6-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Create push single sample API reposnsible for pushing a single
sample into the buffer.
This is a preparation patch for FIFO support where more than
one sample has to be pushed in the trigger handler.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-5-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add new API called devm_adis_setup_buffer_and_trigger_with_attrs() which
also takes buffer attributes as a parameter.
Rewrite devm_adis_setup_buffer_and_trigger() implementation such that it
calls devm_adis_setup_buffer_and_trigger_with_attrs() with buffer
attributes parameter NULL
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-4-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for ADIS16501 device in already existing ADIS16475
driver.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-3-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add ADIS16501 compatible. Similarly to other ADIS1650X devices,
ADIS16501 supports sync-mode values [0,2].
There are two differences between ADIS16501 and ADIS16477-2:
- ADIS16501 does not support pulse sync mode
- the delta velocity scale value is different
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-2-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ad7380x(-4) parts are able to do oversampling to increase accuracy.
This chips supports a normal oversampling mode and a rolling mode and
also allows enabling and disabling extra resolution bits when
oversampling is enabled.
We have intentionally left out the rolling mode for now as there is not
a compelling use case for it. User can process a captured data buffer
to get the same effect.
We are also currently not supporting changing the oversampling mode
independently of the resolution bits. The resolution boost feature
can only be enabled when oversampling is enabled and oversampling is
not as useful without the resolution boost. So for now we consider the
features tightly coupled. When oversampling is enabled, the resolution
boost is enabled and when oversampling is disabled, the resolution
boost is disabled.
Since the resolution boost feature causes 16-bit chips to now have
18-bit data which means the storagebits has to change from 16 to 32
bits, we use the new ext_scan_type feature to allow changing the
scan_type at runtime based on if the resolution boost is enabled or
not.
SPI message optimization has to be moved since now some of the xfer
parameters change based on the resolution boost mode.
A few neighboring comments are also fixed up while we are touching this
code.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Co-developed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-5-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This changes the AD7380 to use spi_optimize_message() to optimize
buffered reads.
This changes both direct reads and buffered reads to use the same
spi_message. This has some (welcome) side effects. The first is that
in buffered reads, the timestamp will now correspond to the same sample
rather than the previous sample. The second is that direct reads now
use the same SPI bus speed as buffered reads.
This reduces CPU usage of the IRQ thread from around 25% to around 20%
when sampling at 10 kHz on a ZedBoard.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-4-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This adds new fields to the iio_channel structure to support multiple
scan types per channel. This is useful for devices that support multiple
resolution modes or other modes that require different data formats of
the raw data.
To make use of this, drivers need to implement the new callback
get_current_scan_type() to resolve the scan type for a given channel
based on the current state of the driver. There is a new scan_type_ext
field in the iio_channel structure that should be used to store the
scan types for any channel that has more than one. There is also a new
flag has_ext_scan_type that acts as a type discriminator for the
scan_type/ext_scan_type union. A union is used so that we don't grow
the size of the iio_channel structure and also makes it clear that
scan_type and ext_scan_type are mutually exclusive.
The buffer code is the only code in the IIO core code that is using the
scan_type field. This patch updates the buffer code to use the new
iio_channel_validate_scan_type() function to ensure it is returning the
correct scan type for the current state of the device when reading the
sysfs attributes. The buffer validation code is also update to validate
any additional scan types that are set in the scan_type_ext field. Part
of that code is refactored to a new function to avoid duplication.
Some userspace tools may need to be updated to re-read the scan type
after writing any other attribute. During testing, we noticed that we
had to restart iiod to get it to re-read the scan type after enabling
oversampling on the ad7380 driver.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-3-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
By using struct iio_scan_type, we can simplify the code by removing
lots of duplicate pointer dereferences. This make the code a bit easier
to read.
This also prepares for a future where channels may have more than one
scan_type.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-2-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This gives the channel scan_type a named type so that it can be used
to simplify code in later commits.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-1-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for ad7380/1/2/3-4 parts which are 4 channels
variants from ad7380/1/2/3
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-7-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add compatible support for ad7380/1/3/4-4 parts which are 4 channels
variants from ad7380/1/3/4
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-6-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The current driver supports only parts with 2 channels.
In order to prepare the support of new compatible ADCs with more
channels, this commit:
- defines MAX_NUM_CHANNEL to specify the maximum number of
channels currently supported by the driver
- adds available_scan_mask member in ad7380_chip_info structure
- fixes spi xfer struct len depending on number of channels
- fixes scan_data.raw buffer size to handle more channels
- adds a timing specifications structure in ad7380_chip_info structure
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-5-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for AD7383, AD7384 pseudo-differential compatible parts.
Pseudo differential parts require common mode voltage supplies so add
the support for them and add the support of IIO_CHAN_INFO_OFFSET to
retrieve the offset
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-4-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Adding AD7383 and AD7384 compatible parts that are pseudo-differential.
Pseudo-differential require common mode voltage supplies, so add them
conditionally
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-3-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This adds a new driver for the AD7380 family ADCs.
The driver currently implements basic support for the AD7380, AD7381,
2-channel differential ADCs. Support for additional single-ended,
pseudo-differential and 4-channel chips that use the same register map
as well as additional features of the chip will be added in future patches.
[Julien Stephan: fix rx/tx buffer for regmap access]
[Julien Stephan: fix scale issue]
[Julien Stephan: use the new iio_device_claim_direct_scoped
instead of iio_device_claim_direct_mode]
Co-developed-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
[Julien Stephan: add datasheet links of supported parts]
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-2-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This adds a binding specification for the Analog Devices Inc. AD7380
family of ADCs.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-1-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When enabling the core, make sure DRP (Dynamic Reconfiguration Port)
is locked. Most of the designs don't really use it but we still get the
lock bit set. So let's do it all the time so the code is generic.
While at it reduce the timeout time to 1 microsecond as it seems to be
enough and goes in line with what we have on the similar DAC core
(adi-axi-dac).
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240531-dev-axi-adc-drp-v3-2-e3fa79447c67@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add proper mutex guards as we should not be able to disable
the core in the middle of enabling it.
Note there's no need to rush in backporting this as the only user of the
backend does not do anything crazy..
Fixes: 794ef0e57854 ("iio: adc: adi-axi-adc: move to backend framework")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240531-dev-axi-adc-drp-v3-1-e3fa79447c67@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
'adt7316_limit_regs' has never been used since the original
commit 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9
driver").
The comment above it is a copy-and-paste from a different struct.
Remove both the struct and the comment.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240529160055.28489-1-linux@treblig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The driver has no clock provider implementation, therefore remove the
include.
Fixes: 63aaf6d06d87 ("iio: frequency: adrf6780: add support for ADRF6780")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20240530092835.36892-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
bmi150-accel and bmi323-imu are declared in an almost identical way in the ACPI and in some devices such as the Asus RC71L the "ROTM" property can be found: parse and use the ACPI-defined mount-matrix.
Co-developed-by: Luke D. Jones <luke@ljones.dev>
Co-developed-by: Jonathan LoBue <jlobue10@gmail.com>
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://lore.kernel.org/r/20240523174736.16692-2-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In the ad7944 driver, the ad7944_convert_and_acquire() had an unused
`chan` parameter. This patch removes the parameter.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240524-iio-ad7944-remove-unused-parameter-v1-1-fd824d7122a0@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The Makefile for IIO ADC drivers is intended to be sorted alphabetically.
I can be tricky to keep it sorted when adding new drivers when not all
of the existing drivers are sorted. So let's sort everything now to make
it easier to keep it sorted in the future.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240523192412.3220547-1-dlechner@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use same driver file name (ad3552r) for structure names used
for all variants.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-7-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
After model data and num_hw_channles introduction, we have:
ad3552r_desc, num_ch: used to keep channel number set in fdt,
ad35xxr_model_data, num_hw_channels: for max channel checks,
AD3552R_NUM_CH: just actually used to define the max array size
on allocated arrays.
Renaming AD3552R_NUM_CH to a more consistent name, as AD3552R_MAX_CH.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-6-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for single-output DAC variants.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-5-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a "model data" structure to keep useful hardware-related
information as from datasheet, avoiding id-based conditional
choices later on.
Removed id-based checks and filled model-specific structures
with device specific features, In particular, num_hw_channels
is introduced to keep the number of hardware implemented
channels, since 1-channel versions of the DACs are added
in this same patchset.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-4-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
