summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-23drm/amd/pm: update driver if header for smu_13_0_7lyndonli
update driver if header for smu_13_0_7 Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/pm: Enable bad memory page/channel recording support for smu v13_0_0Candice Li
Send message to SMU to update bad memory page and bad channel info. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: 3.2.213Aric Cyr
This version brings along following fixes: -Add configuration 2 for ABM 2.3/2.4. -Add margin for HUBP for SubVp + DRR. -Fix no display after resume from WB/CB. -Limit HW cursor size to be less than 64 x 64 bytes when the stream is >= 4K. -Lower watermarks for enter/enter+exit latency. -Update support types for DCN314 to include z8 only and z8_z10 only state. -Add new value for soc bounding box and dummy pstate. -Override fclk chang latency when calculating prefetch schedule for subvp with low uclk. -Add check for DET fetch latency for dcn32. -Add check if PSR enabled when entering MALL. -Use base MALL allocation size calculations off vewport height. -Add YCBCR2020 to CSC matrix. -Implement DP-Tx portion to interact with DPIA. -Add debug option for increasing phantom lines. -Fix phantom plane/stream retain after fail validation. -Fix display corruption with VSR enable. -Set valid divider value for virtual and FRL/DP2. -Add new num clk levels struct for max mclk index. -Fix check for phantom BPP. -Fix rotated cursor offset calculation. Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Fix rotated cursor offset calculationDavid Galiffi
[Why] Underflow is observed when cursor is still enabled when the cursor rectangle is outside the bounds of it's surface viewport. [How] Update parameters used to determine when cursor should be disabled. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Revert check for phantom BPPAlvin Lee
[Description] Revert change since enabling SubVP on 8K60 single cable results in corruption Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use new num clk levels struct for max mclk indexDillon Varone
[WHY?] When calculating watermark and dlg values, the max mclk level index and associated speed are needed to find the correlated dummy latency value. Currently the incorrect index is given due to a clock manager refactor. [HOW?] Use num_memclk_level from num_entries_per_clk struct for getting the correct max mem speed. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Avoid setting pixel rate divider to N/ATaimur Hassan
[Why] Pixel rate divider values should never be set to N/A (0xF) as the K1/K2 field is only 1/2 bits wide. [How] Set valid divider values for virtual and FRL/DP2 cases. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Fix display corruption w/ VSR enableIlya Bakoulin
[Why] Brief corruption is observed on hotplug/unplug with certain display configurations when VSR is enabled. [How] Work around the issue by avoiding 2to1 ODM when stream plane_count is 0. Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Retain phantom plane/stream if validation failsAlvin Lee
[Description] - If we fail validation, we should retain the phantom stream/planes - Full updates assume that phantom pipes will be fully removed, but if validation fails we keep the phantom pipes - Therefore we have to retain the plane/stream if validation fails (since the refcount is decremented before validation, and the expectation is that it's fully freed when the old dc_state is released) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add debug options for increasing phantom linesAlvin Lee
[Description] - Add debug option for increasing number of phantom lines Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Phase 1 Add Bw Allocation source and header filesMustapha Ghaddar
[WHY] To implement BW Allocation as per USB4 spec chapter 10.7 [HOW] Implement the DP-Tx portion of the logic to interact with DPIA Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add YCBCR2020 coefficients to CSC matrixRodrigo Siqueira
When some of the IGT tests are executed in DCN31, it is possible to see multiple occurrences of this warning: WARNING: CPU: 9 PID: 3482 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dcn30/dcn30_dpp.c:154 dpp3_program_post_csc+0x196/0x220 [amdgpu] [..] PU: 9 PID: 3482 Comm: amd_hdr Tainted: G W 5.18.0+ #3 IP: 0010:dpp3_program_post_csc+0x196/0x220 [amdgpu] [..] all Trace: <TASK> dpp3_cnv_setup+0x5d9/0x5f0 [amdgpu] ? dcn20_blank_pixel_data+0x30a/0x330 [amdgpu] dcn20_program_pipe+0x259/0xb40 [amdgpu] ? offset_to_id+0x1b0/0x1c0 [amdgpu] dcn20_program_front_end_for_ctx+0x36a/0x450 [amdgpu] commit_planes_for_stream+0x8eb/0x13e0 [amdgpu] This commit fix the above issue by adding YCBCR2020 coefficients to the DPP Color Space Converter (CSC) matrix. Reviewed-by: Nawwar Ali <nawwar.ali@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use viewport height for subvp mall allocation sizeDillon Varone
[WHY?] MALL allocation size depends on the viewport height, not the addressable vertical lines, which will not match when scaling. [HOW?] Base MALL allocation size calculations off viewport height. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Check if PSR enabled when entering MALLAlvin Lee
[Description] - When attempting to enter MALL SS when a PSR panel is connected, we have to check that the PSR panel has already entered PSR because the vsync interrupt call is per display index (can be called for the non-PSR panel first) - Also don't override link settings when programming phantom stream (main and phantom pipe share the same link) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add check for DET fetch latency hiding for dcn32Dillon Varone
[WHY?] Some configurations are constructed with very marginal DET buffers relative to the worst possible time required to fetch a swath. [HOW?] Add a check to see that the DET buffer allocated for each pipe can hide the latency for all pipes to fetch at least one swath. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use dummy pstate latency for subvp when needed on dcn32Dillon Varone
[WHY?] Prefetch is not budgetting time for dummy pstate when using subvp and low uclk. [HOW?] Override fclk change latency to use dummy pstate latency when calculating prefetch schedule for subvp configs with low uclk. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Update soc bounding box for dcn32/dcn321Dillon Varone
[Description] New values for soc bounding box and dummy pstate. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add Z8 allow states to z-state support listNicholas Kazlauskas
[Why] Even if we block Z9 based on crossover threshold it's possible to allow for Z8. [How] There's support for this on DCN314, so update the support types to include a z8 only and z8_z10 only state. Update the decide_zstate_support function to allow for specifying these modes based on the Z8 threshold. DCN31 has z-state disabled, but still update the legacy code to map z8_only = disallow and z10_z8_only = z10_only to keep the support the same. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Update Z8 watermarks for DCN314Nicholas Kazlauskas
[Why & How] Update from HW, need to lower watermarks for enter/enter+exit latency. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Limit HW cursor size of >= 4kAlvin Lee
[Description] - For SubVP, we cannot support HW cursor if it's greater than 64 x 64 x 4 bytes in size - However, on certain config changes (i.e. pixel format) we can exit SubVP (then change to HW cursor) then re-enter SubVP without changing back to SW cursor because there is no SetCursorAttributes call - To workaround this issue, limit the HW cursor size to be less than 64 x 64 x 4 bytes whenever the stream is >= 4K - Also ensure this W/A only affects DCN that supports SubVP Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: No display after resume from WB/CBTsung-hua Lin
[why] First MST sideband message returns AUX_RET_ERROR_HPD_DISCON on certain intel platform. Aux transaction considered failure if HPD unexpected pulled low. The actual aux transaction success in such case, hence do not return error. [how] Not returning error when AUX_RET_ERROR_HPD_DISCON detected on the first sideband message. v2: squash in fix (Alex) Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Tsung-hua Lin <Tsung-hua.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add margin on DRR vblank start for subvpAlvin Lee
[Description] - Add margin for HUBP "jitter" for SubVp + DRR case - Also do a min transition even if MPO is added on a non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: new ABM config 2Camille Cho
[Why & How] Add configuration 2 for ABM 2.3/2.4 to suit customer preferences, which is to lower the brightness curves in 80%-100% range compared to the existing default config 0. Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/dc/dce120: Fix audio register mapping, stop triggering KASANLyude Paul
There's been a very long running bug that seems to have been neglected for a while, where amdgpu consistently triggers a KASAN error at start: BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu] Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889 After digging through amd's rather creative method for accessing registers, I eventually discovered the problem likely has to do with the fact that on my dce120 GPU there are supposedly 7 sets of audio registers. But we only define a register mapping for 6 sets. So, fix this and fix the KASAN warning finally. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: fix pci device refcount leakYang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from amdgpu_device_resume|suspend_display_audio(), pci_dev_put() is called to avoid refcount leak. Fixes: 3f12acc8d6d4 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu/psp: don't free PSP buffers on suspendAlex Deucher
We can reuse the same buffers on resume. v2: squash in S4 fix from Shikai Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2213 Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-23drm/amdgpu/dm/mst: Fix uninitialized var in ↵Lyude Paul
pre_compute_mst_dsc_configs_for_state() Coverity noticed this one, so let's fix it. Fixes: 7cce4cd628be ("drm/amdgpu/mst: Stop ignoring error codes and deadlocking") Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org # v5.6+
2022-11-23drm/amd/amdgpu: reserve vm invalidation engine for firmwareJack Xiao
If mes enabled, reserve VM invalidation engine 5 for firmware. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: fix compilation issue with legacy gccBob zhou
This patch is used to fix following compilation issue with legacy gcc error: ‘for’ loop initial declarations are only allowed in C99 mode for (int i = flag_vlevel; i < context->bw_ctx.dml.soc.num_states; i++) { Signed-off-by: Bob zhou <bobzhou2@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23Merge tag 'drm-intel-next-2022-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next GVT Changes: - gvt-next stuff mostly with refactor for the new MDEV interface. i915 Changes: - PSR fixes and improvements (Jouni) - DP DSC fixes (Vinod, Jouni) - More general display cleanups (Jani) - More display collor management cleanup targetting degamma (Ville) - remove circ_buf.h includes (Jiri) - wait power off delay at driver remove to optimize probe (Jani) - More audio cleanup targeting the ELD precompute readout (Ville) - Enable DC power states on all eDP ports (Imre) - RPL-P stepping info (Matt Atwood) - MTL enabling patches (RK) - Removal of DG2 force_probe (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
2022-11-22Merge tag 'drm-intel-gt-next-2022-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Core Changes: - Backmerge of drm-next Driver Changes: - Restore probe_range behaviour for userptr (Matt A) - Fix use-after-free on lmem_userfault_list (Matt A) - Never purge busy TTM objects (Matt A) - Meteorlake enabling (Daniele, Badal, Daniele, Stuart, Aravind, Alan) - Demote GuC kernel contexts to normal priority (John) - Use RC6 residency types as arguments to residency functions (Ashutosh, Rodrigo, Jani) - Convert some legacy DRM debugging macros to new ones (Tvrtko) - Don't deadlock GuC busyness stats vs reset (John) - Remove excessive line feeds in GuC state dumps (John) - Use i915_sg_dma_sizes() for all backends (Matt A) - Prefer REG_FIELD_GET in intel_rps_get_cagf (Ashutosh, Rodrigo) - Use GEN12_RPSTAT register for GT freq (Don, Badal, Ashutosh) - Remove unwanted TTM ghost obj check (Matt A) - Update workaround documentation (Lucas) - Coding style and static checker fixes and cleanups (Jani, Umesh, Tvrtko, Lucas, Andrzej) - Selftest improvements (Chris, Daniele, Riana, Andrzej) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3dMd9HDpfDehhWm@jlahtine-mobl.ger.corp.intel.com
2022-11-22Merge tag 'amd-drm-next-6.2-2022-11-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.2-2022-11-18: amdgpu: - SR-IOV fixes - Clean up DC checks - DCN 3.2.x fixes - DCN 3.1.x fixes - Don't enable degamma on asics which don't support it - IP discovery fixes - BACO fixes - Fix vbios allocation handling when vkms is enabled - Drop buggy tdr advanced mode GPU reset handling - Fix the build when DCN is not set in kconfig - MST DSC fixes - Userptr fixes - FRU and RAS EEPROM fixes - VCN 4.x RAS support - Aldrebaran CU occupancy reporting fix - PSP ring cleanup amdkfd: - Memory limit fix - Enable cooperative launch on gfx 10.3 amd-drm-next-6.2-2022-11-11: amdgpu: - SMU 13.x updates - GPUVM TLB race fix - DCN 3.1.4 updates - DCN 3.2.x updates - PSR fixes - Kerneldoc fix - Vega10 fan fix - GPUVM locking fixes in error pathes - BACO fix for Beige Goby - EEPROM I2C address cleanup - GFXOFF fix - Fix DC memory leak in error pathes - Flexible array updates - Mtype fix for GPUVM PTEs - Move Kconfig into amdgpu directory - SR-IOV updates - Fix possible memory leak in CS IOCTL error path amdkfd: - Fix possible memory overrun - CRIU fixes radeon: - ACPI ref count fix - HDA audio notifier support - Move Kconfig into radeon directory UAPI: - Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI. These are used internally in the driver to align location based memory coherency requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now. They are just used internally in the kernel driver for now for existing KFD memory allocations. So a change to the UAPI header, but no functional change in the UAPI. From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-11-22Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into ↵Dave Airlie
drm-next please pull the following etnaviv changes for the next merge window. Mostly some small workarounds to get new hardware support going. But also more fixes to the softpin MMU handling and a nice addition from Christian to make the kernel logs on hang detection more useful. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/adcb1b3dec89a18d6c3c4ee6e179b9b2c9f25046.camel@pengutronix.de
2022-11-22Merge tag 'drm-misc-next-2022-11-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: Cross-subsystem Changes: - fbdev: Add support for the nomodeset kernel parameter Core Changes: - client: Add kunit tests for drm_connector_pick_cmdline_mode() - dma-buf: Move dma_buf_mmap_internal() to new locking specification - edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a temporary device to load the EDID through the firmware mechanism - fb-helper: Remove damage worker - gem-vram: Fix deadlock in drm_gem_vram_vmap() - modes: Named mode parsing improvements - tests: Add Kunit helpers to create a DRM device Driver Changes: - hisilicon: convert to drm_mode_init() - malidp: Use drm-managed resources - msm: convert to drm_mode_init() and drm_mode_copy() - mtk: convert to drm_mode_init() - nouveau: Support backlight control for nva3 - rockchip: convert to drm_mode_copy() - sti: convert to drm_mode_copy() - v3d: Switch to drm-managed resources - vc4: Fix potential NULL pointer dereference - panels: - New panel: NewVision NV3051D Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221117083628.mzij5nrbdzokek7c@houat
2022-11-18drm/i915/dg2: Drop force_probe requirementMatt Roper
DG2 has been very usable for a while now, and all of the uapi changes related to fundamental platform usage have been finalized. Recent CI results have also been healthy, so we're ready to drop the force_probe requirement and enable the platform by default. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221109001328.732000-1-matthew.d.roper@intel.com
2022-11-18drm/i915/mtl: Skip doubling channel numbers for LPDDR4/LPDDDR5Radhakrishna Sripada
MTL LPDDR5 reported 16b with 8 channels. Previous platforms reported 32b with 4 channels and hence needed a multiplication by a factor of 2. Skip increasing the channels for MTL. v2: Use version check instead of platform check(MattR) Bspec: 64631 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117213015.584417-2-radhakrishna.sripada@intel.com
2022-11-18drm/i915/mtl: Fix dram info readoutRadhakrishna Sripada
MEM_SS_INFO_GLOBAL Register info read from the hardware is cached in val. However the variable is being modified when determining the DRAM type thereby clearing out the channels and qgv info extracted later in the function xelpdp_get_dram_info. Preserve the register value and use extracted fields in the switch statement. Fixes: 825477e77912 ("drm/i915/mtl: Obtain SAGV values from MMIO instead of GT pcode mailbox") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117213015.584417-1-radhakrishna.sripada@intel.com
2022-11-18drm/i915/rpl-p: Add stepping infoMatt Atwood
Add stepping-substepping info in accordance to bpsec changes. Bspec: 55376 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117214132.152061-1-matthew.s.atwood@intel.com
2022-11-18drm/i915/mtl+: Don't enable the AUX_IO power for non-eDP port main linksImre Deak
MTL+ requires the AUX_IO power for the main link only on eDP, so don't enable it in other cases. v2: - Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-10-imre.deak@intel.com
2022-11-18drm/i915: Factor out function to get/put AUX_IO power for main linkImre Deak
Factor out functions to get/put the AUX_IO power domain for the main link on DDI ports. While at it clarify the corresponding code comment. No functional change. v2: - s/(get/put)_aux_power_for_main_link/main_link_aux_power_domain_(get/put) (Jani) - Clarify in the code comment that AUX_IO is needed only by TypeC besides eDP/PSR. v3: - Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr. v4: - Don't call fetch_and_zero() with side-effect during variable declaration. (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-9-imre.deak@intel.com
2022-11-18drm/i915: Add missing DC_OFF power domain->well mappingsImre Deak
Add the missing DC_OFF power domain -> DC_OFF power well mappings on all platforms. This didn't cause a problem as the DC_OFF power domain is only used on JSL, where the mapping was already correct. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-8-imre.deak@intel.com
2022-11-18drm/i915: Add missing AUX_IO_A power domain->well mappingsImre Deak
BXT and GLK were missing the AUX_IO_A power domain -> PHY A common power well mapping, add these now. This didn't cause a problem as the AUX_IO_A and DDI_LANES_A power domains are acquired together. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-7-imre.deak@intel.com
2022-11-18drm/i915/tgl+: Enable display DC power states on all eDP portsImre Deak
Starting with TGL eDP is supported on ports B+ (besides port A), so make sure DC states are not blocked on any such ports. For this add an AUX_IO_<port> power domain for each port with eDP support. These domains similarly to AUX_IO_A enable only the AUX_IO_<port> power well for an enabled port, whereas the existing AUX_<port> domains enable both the AUX_IO_<port> and the DC_OFF power wells as required by DP AUX transfers. v2: (Ville) - Split the change using AUX vs. AUX_IO on port A to a separate patch. - Select AUX_IO vs. AUX based on crtc_state->has_psr instead of is_edp(). v3: - Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr. v4: - Fix warn in intel_display_power_aux_io_domain(). (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-6-imre.deak@intel.com
2022-11-18drm/i915: Use the AUX_IO power domain only for eDP/PSR portImre Deak
Use the AUX_IO_A display power domain only for eDP on port A where PSR is also supported. This is the case where DC states need to be enabled while the output is enabled - ensured by AUX_IO_A domain not enabling the DC_OFF power well. Otherwise port A can be treated the same way as other ports with an external DP output: using the AUX_<port> domain which disables the unrequired DC states. This change prepares for the next patch enabling DC states on all ports supporting eDP/PSR besides port A. v2: - Check the encoder PSR capability instead of PSR being enabled in the crtc_state, as the latter can be changed with a fastset. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-5-imre.deak@intel.com
2022-11-18drm/i915: Move the POWER_DOMAIN_AUX_IO_A definition to its logical placeImre Deak
Move the definition of the AUX_IO_A power domain, requiring only the corresponding AUX_IO_A power well to be enabled, before all the AUX_<port> power domains, which require both the AUX_IO_<port> and the DC_OFF power wells to be enabled. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-4-imre.deak@intel.com
2022-11-18drm/i915: Preallocate the debug power domain wakerefs arrayImre Deak
Since the current size of intel_display_power_domain_set struct is close to 1kB, it's better to use preallocated memory for it. The only user of the intel_display_power_get/put_in_set() allocating the struct on stack is hsw_get_pipe_config(), so we can avoid potential stack overallocations by moving the struct here to the preallocated intel_crtc struct (hsw_get_pipe_config() is non-reentrant wrt. each CRTC). This patch replaces https://lore.kernel.org/intel-gfx/20221107170917.3566758-5-imre.deak@intel.com/T/#md3f6cdf17fcd Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-3-imre.deak@intel.com
2022-11-18drm/i915: Fix warn in intel_display_power_*_domain() functionsImre Deak
The intel_display_power_*_domain() functions should always warn if a default domain is returned as a fallback, fix this up. Spotted by Ville. Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-2-imre.deak@intel.com
2022-11-17drm/amdgpu: make psp_ring_init commonAlex Deucher
All of the IP specific versions are the same now, so we can just use a common function. Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu/psp12: move ih_reroute into ring_createAlex Deucher
This matches what we do for psp 3.1 and makes ring_init common for all PSP versions. Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amd/display: fix kernel-doc issues in dc.hRandy Dunlap
Fix these kernel-doc complaints: drivers/gpu/drm/amd/display/dc/dc.h:505: warning: cannot understand function prototype: 'struct dc_clocks ' dc.h:472: warning: Enum value 'MPC_SPLIT_AVOID' not described in enum 'pipe_split_policy' dc.h:472: warning: Enum value 'MPC_SPLIT_AVOID_MULT_DISP' not described in enum 'pipe_split_policy' dc.h:532: warning: Incorrect use of kernel-doc format: * @fw_based_mclk_switching Fixes: ea76895ffab1 ("drm/amd/display: Document pipe split policy") Fixes: 1682bd1a6b5f ("drm/amd/display: Expand kernel doc for DC") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 12:36:22 +0000