summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-05sh-pfc: sh73a0: Add VCCQ MC0 regulatorLaurent Pinchart
The sh73a0 has an internal power gate on the VCCQ power supply for the SDHI0 device that is controlled (for some strange reason) by a bit in a PFC register. This feature should be exposed as a regulator. As the same register is also used for pin control purposes there is no way to achieve atomic read/write sequences with a separate regulator driver. We thus need to implement the regulator here. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: Add support for SoC-specific initializationLaurent Pinchart
Add two optional init and exit SoC operations and call them from the core at probe and remove time. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7779 pinmux platform device cleanupMagnus Damm
Use DEFINE_RES_MEM() to save a couple of lines of code. Signed-off-by: Magnus Damm <damm@opensource.se> [lp: Don't declare r8a7779_pfc_resources as const] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Register GPIO devicesLaurent Pinchart
Move GPIOs handling from the PFC device to separate GPIO devices. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7778: add GPIO supportKuninori Morimoto
This patch was tested on Bock-W board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: tidyup SDHI naming suffixes and sort it alphabeticallyKuninori Morimoto
SDHI 1/2 are the target Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: Fix outdated GPIO_FN commentsLaurent Pinchart
Function GPIOs have been removed, remove comments that refer to them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7740: Add bias (pull-up/down) pinconf supportLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7740: Replace GPIO_PORTx enum with GPIO port numbersLaurent Pinchart
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7740: Remove function GPIOsLaurent Pinchart
No r8a7740 platform use the function GPIOs API. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove HDMI function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove FSI function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove CEU function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove GETHER function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove BSC function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove INTC function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove SCIF function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: armadillo800eva: Convert SCIFA1 to pinctrlBastian Hecht
We use the new pinctrl framework now. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Remove HDMI function GPIOSLaurent Pinchart
All r8a7740 platforms now use the pinctrl API to control the HDMI pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Remove FSI function GPIOSLaurent Pinchart
All r8a7740 platforms now use the pinctrl API to control the FSI pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Remove CEU function GPIOSLaurent Pinchart
All r8a7740 platforms now use the pinctrl API to control the CEU pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Remove GETHER function GPIOSLaurent Pinchart
All r8a7740 platforms now use the pinctrl API to control the GETHER pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Remove BSC function GPIOSLaurent Pinchart
All r8a7740 platforms now use the pinctrl API to control the BSC pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Remove INTC function GPIOSLaurent Pinchart
All r8a7740 platforms now use the pinctrl API to control the INTC pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Remove SCIF function GPIOSLaurent Pinchart
All r8a7740 platforms now use the pinctrl API to control the SCIF pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: bonito: Don't configure LCDC routing manuallyLaurent Pinchart
LCDC routing is configured automatically in the PFC driver, don't configure it manually in board code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: bonito: Register pinctrl mapping for BSCLaurent Pinchart
Replace the GPIO-based BSC pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: bonito: Register pinctrl mapping for INTCLaurent Pinchart
Replace the GPIO-based INTC pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: bonito: Register pinctrl mapping for SCIFLaurent Pinchart
Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: bonito: Remove empty core devices arrayLaurent Pinchart
The core devices array is empty, passing it to platform_add_devices() is a no-op. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Replace GPIO_PORTx with GPIO port numbersLaurent Pinchart
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Don't configure LCDC routing manuallyLaurent Pinchart
LCDC routing is configured automatically in the PFC driver, don't configure it manually in board code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Register pinctrl mapping for HDMILaurent Pinchart
Replace the GPIO-based HDMI pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Register pinctrl mapping for FSILaurent Pinchart
Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Register pinctrl mapping for CEU0Laurent Pinchart
Replace the GPIO-based CEU0 pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Register pinctrl mapping for GETHERLaurent Pinchart
Replace the GPIO-based GETHER pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Register pinctrl mapping for INTCLaurent Pinchart
Replace the GPIO-based INTC pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Hardcode the LCDC0 outputLaurent Pinchart
The r8a7740 has two LCDC units and two sets of LCDC output signals. By default LCDC0 is routed to the LCD0 signals, and LCDC1 to the LCD1 signals. However, LCDC1 can be routed to the LCD0 signals by setting bit MSEL6 in MSEL3CR (the LCD0 signals are further pinmuxed the usual way). This could be configured by duplicating the LCD0 pin groups for LCDC1. However, this would unnecessarily complicate the LCD pin groups, as no r8a7740 board supported in mainline use such a configuration. Hardcode the MSEL3CR MSEL6 bit to 0 for now. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Add HDMI pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Add FSI pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Add CEU pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Add GETHER pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Add BSC pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Declare missing INTC functionLaurent Pinchart
When adding the INTC pin groups the INTC function hasn't been added to the functions list. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Add SCIF pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: sh7372: Add bias (pull-up/down) pinconf supportLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: sh7372: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: sh7372: Remove function GPIOsLaurent Pinchart
No sh7372 platform use the function GPIOs API. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 16:51:43 +0000