Age | Commit message (Collapse) | Author |
|
set_dev_pasid() op is going to be enhanced to support domain replacement
of a pasid. This prepares for this op definition.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-13-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add intel_nested_set_dev_pasid() to set a nested type domain to a PASID
of a device.
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-12-yi.l.liu@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Let identity_domain_set_dev_pasid() call the pasid replace helpers hence
be able to do domain replacement.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-11-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Make intel_svm_set_dev_pasid() support replacement.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-10-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
intel_iommu_set_dev_pasid() is only supposed to be used by paging domain,
so limit it.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-9-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Let intel_iommu_set_dev_pasid() call the pasid replace helpers hence be
able to do domain replacement.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-8-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
domain_id_iommu() does not support SVA type and identity type domains.
Add iommu_domain_did() to support all domain types.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-7-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The domain_add_dev_pasid() and domain_remove_dev_pasid() are added to
consolidate the adding/removing of the struct dev_pasid_info. Besides,
it includes the cache tag assign/unassign as well.
This also prepares for adding domain replacement for pasid. The
set_dev_pasid callbacks need to deal with the dev_pasid_info for both old
and new domain. These two helpers make the life easier.
intel_iommu_set_dev_pasid() and intel_svm_set_dev_pasid() are updated to
use the helpers.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-6-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
pasid replacement allows converting a present pasid entry to be FS, SS,
PT or nested, hence add helpers for such operations.
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-5-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
It is clearer to have a new set of pasid replacement helpers other than
extending the existing ones to cover both initial setup and replacement.
Then abstract out the common code for manipulating the pasid entry as
preparation.
No functional change is intended.
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-4-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Generalize the logic for flushing pasid-related cache upon changes to
bits other than SSADE and P which requires a different flow according
to VT-d spec.
No functional change is intended.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-3-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To support domain replacement for pasid, the underlying iommu driver needs
to know the old domain hence be able to clean up the existing attachment.
It would be much convenient for iommu layer to pass down the old domain.
Otherwise, iommu drivers would need to track domain for pasids by
themselves, this would duplicate code among the iommu drivers. Or iommu
drivers would rely group->pasid_array to get domain, which may not always
the correct one.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-2-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
As this iommu driver now supports page faults for requests without
PASID, page requests should be drained when a domain is removed from
the RID2PASID entry.
This results in the intel_iommu_drain_pasid_prq() call being moved to
intel_pasid_tear_down_entry(). This indicates that when a translation
is removed from any PASID entry and the PRI has been enabled on the
device, page requests are drained in the domain detachment path.
The intel_iommu_drain_pasid_prq() helper has been modified to support
sending device TLB invalidation requests for both PASID and non-PASID
cases.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241101045543.70086-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
PASID support within the IOMMU is not required to enable the Page
Request Queue, only the PRS capability.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-5-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add IOMMU_HWPT_FAULT_ID_VALID as part of the valid flags when doing an
iommufd_hwpt_alloc allowing the use of an iommu fault allocation
(iommu_fault_alloc) with the IOMMU_HWPT_ALLOC ioctl.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-4-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Move IOMMU_IOPF from under INTEL_IOMMU_SVM into INTEL_IOMMU. This
certifies that the core intel iommu utilizes the IOPF library
functions, independent of the INTEL_IOMMU_SVM config.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-3-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
PASID is not strictly needed when handling a PRQ event; remove the check
for the pasid present bit in the request. This change was not included
in the creation of prq.c to emphasize the change in capability checks
when handing PRQ events.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-2-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IO page faults are no longer dependent on CONFIG_INTEL_IOMMU_SVM. Move
all Page Request Queue (PRQ) functions that handle prq events to a new
file in drivers/iommu/intel/prq.c. The page_req_des struct is now
declared in drivers/iommu/intel/prq.c.
No functional changes are intended. This is a preparation patch to
enable the use of IO page faults outside the SVM/PASID use cases.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-1-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There are some issues in pgtable_walk():
1. Super page is dumped as non-present page
2. dma_pte_superpage() should not check against leaf page table entries
3. Pointer pte is never NULL so checking it is meaningless
4. When an entry is not present, it still makes sense to dump the entry
content.
Fix 1,2 by checking dma_pte_superpage()'s returned value after level check.
Fix 3 by removing pte check.
Fix 4 by checking present bit after printing.
By this chance, change to print "page table not present" instead of "PTE
not present" to be clearer.
Fixes: 914ff7719e8a ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-3-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There are some issues in dmar_fault_dump_ptes():
1. return value of phys_to_virt() is used for checking if an entry is
present.
2. dump is confusing, e.g., "pasid table entry is not present", confusing
by unpresent pasid table vs. unpresent pasid table entry. Current code
means the former.
3. pgtable_walk() is called without checking if page table is present.
Fix 1 by checking present bit of an entry before dump a lower level entry.
Fix 2 by removing "entry" string, e.g., "pasid table is not present".
Fix 3 by checking page table present before walk.
Take issue 3 for example, before fix:
[ 442.240357] DMAR: pasid dir entry: 0x000000012c83e001
[ 442.246661] DMAR: pasid table entry[0]: 0x0000000000000000
[ 442.253429] DMAR: pasid table entry[1]: 0x0000000000000000
[ 442.260203] DMAR: pasid table entry[2]: 0x0000000000000000
[ 442.266969] DMAR: pasid table entry[3]: 0x0000000000000000
[ 442.273733] DMAR: pasid table entry[4]: 0x0000000000000000
[ 442.280479] DMAR: pasid table entry[5]: 0x0000000000000000
[ 442.287234] DMAR: pasid table entry[6]: 0x0000000000000000
[ 442.293989] DMAR: pasid table entry[7]: 0x0000000000000000
[ 442.300742] DMAR: PTE not present at level 2
After fix:
...
[ 357.241214] DMAR: pasid table entry[6]: 0x0000000000000000
[ 357.248022] DMAR: pasid table entry[7]: 0x0000000000000000
[ 357.254824] DMAR: scalable mode page table is not present
Fixes: 914ff7719e8a ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-2-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
dmar_domian has stored the s1_cfg which includes the s1_pgtbl info, so
no need to store s1_pgtbl, hence drop it.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241025143339.2328991-1-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
dmar_msi_read() has been unused since 2022 in
commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture")
Remove it.
(dmar_msi_write still exists and is used once).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241022002702.302728-1-linux@treblig.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
GCC is not happy with the current code, e.g.:
.../iommu/intel/dmar.c:1063:9: note: ‘sprintf’ output between 6 and 15 bytes into a destination of size 13
1063 | sprintf(iommu->name, "dmar%d", iommu->seq_id);
When `make W=1` is supplied, this prevents kernel building. Fix it by
increasing the buffer size for device name and use sizeoF() instead of
hard coded constants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241014104529.4025937-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The macro PCI_DEVID() can be used instead of compose it manually.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240829021011.4135618-1-ruanjinjie@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The domain_alloc_user ops should always allocate a guest-compatible page
table unless specific allocation flags are specified.
Currently, IOMMU_HWPT_ALLOC_NEST_PARENT and IOMMU_HWPT_ALLOC_DIRTY_TRACKING
require special handling, as both require hardware support for scalable
mode and second-stage translation. In such cases, the driver should select
a second-stage page table for the paging domain.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The first stage page table is compatible across host and guest kernels.
Therefore, this driver uses the first stage page table as the default for
paging domains.
The helper first_level_by_default() determines the feasibility of using
the first stage page table based on a global policy. This policy requires
consistency in scalable mode and first stage translation capability among
all iommu units. However, this is unnecessary as domain allocation,
attachment, and removal operations are performed on a per-device basis.
The domain type (IOMMU_DOMAIN_DMA vs. IOMMU_DOMAIN_UNMANAGED) should not
be a factor in determining the first stage page table usage. Both types
are for paging domains, and there's no fundamental difference between them.
The driver should not be aware of this distinction unless the core
specifies allocation flags that require special handling.
Convert first_level_by_default() from global to per-iommu and remove the
'type' input.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The requirement for consistent super page support across all the IOMMU
hardware in the system has been removed. In the past, if a new IOMMU
was hot-added and lacked consistent super page capability, the hot-add
process would be aborted. However, with the updated attachment semantics,
it is now permissible for the super page capability to vary among
different IOMMU hardware units.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The attributes of a paging domain are initialized during the allocation
process, and any attempt to attach a domain that is not compatible will
result in a failure. Therefore, there is no need to update the domain
attributes at the time of domain attachment.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The driver now supports domain_alloc_paging, ensuring that a valid device
pointer is provided whenever a paging domain is allocated. Additionally,
the dmar_domain attributes are set up at the time of allocation.
Consistent with the established semantics in the IOMMU core, if a domain is
attached to a device and found to be incompatible with the IOMMU hardware
capabilities, the operation will return an -EINVAL error. This implicitly
advises the caller to allocate a new domain for the device and attempt the
domain attachment again.
Rename prepare_domain_attach_device() to a more meaningful name.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
With domain_alloc_paging callback supported, the legacy domain_alloc
callback will never be used anymore. Remove it to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add the domain_alloc_paging callback for domain allocation using the
iommu_paging_domain_alloc() interface.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
|
|
Pull smb client fixes from Steve French:
"Two fixes for Windows symlink handling"
* tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix creating native symlinks pointing to current or parent directory
cifs: Improve creating native symlinks pointing to directory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported problems for 6.12-rc3.
Include in here is:
- fix for yurex driver that was caused in -rc1
- build error fix for usbg network filesystem code
- onboard_usb_dev build fix
- dwc3 driver fixes for reported errors
- gadget driver fix
- new USB storage driver quirk
- xhci resume bugfix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
net/9p/usbg: Fix build error
USB: yurex: kill needless initialization in yurex_read
Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant"
usb: xhci: Fix problem with xhci resume from suspend
usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support
usb: dwc3: core: Stop processing of pending events if controller is halted
usb: dwc3: re-enable runtime PM after failed resume
usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip
usb: gadget: core: force synchronous registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is a single driver core fix, and a .mailmap update.
The fix is for the rust driver core bindings, turned out that the
from_raw binding wasn't a good idea (don't want to pass a pointer to a
reference counted object without actually incrementing the pointer.)
So this change fixes it up as the from_raw binding came in in -rc1.
The other change is a .mailmap update.
Both have been in linux-next for a while with no reported issues"
* tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mailmap: update mail for Fiona Behrens
rust: device: change the from_raw() function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix crash in memcpy on 8xx due to dcbz workaround since recent
changes
Thanks to Christophe Leroy.
* tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Fix kernel DTLB miss on dcbz
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers and one in the FC transport class
to add idempotence to state setting"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_fc: Allow setting rport state to current state
scsi: wd33c93: Don't use stale scsi_pointer value
scsi: fnic: Move flush_work initialization out of if block
scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Add missing dependencies on REGMAP_I2C for several drivers
- Fix memory leak in adt7475 driver
- Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon
driver to match other sensor labels
* tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Add missing dependency on REGMAP_I2C
hwmon: (ltc2991) Add missing dependency on REGMAP_I2C
hwmon: (adt7470) Add missing dependency on REGMAP_I2C
hwmon: (adm9240) Add missing dependency on REGMAP_I2C
hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C
hwmon: (tmp513) Add missing dependency on REGMAP_I2C
hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config()
hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes for build, run-time errors, and reporting errors:
- ftrace: regression test for a kernel crash when running function
graph tracing and then enabling function profiler.
- rseq: fix for mm_cid test failure.
- vDSO:
- fixes to reporting skip and other error conditions
- changes unconditionally build chacha and getrandom tests on all
architectures to make it easier for them to run in CIs
- build error when sched.h to bring in CLONE_NEWTIME define"
* tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
ftrace/selftest: Test combination of function_graph tracer and function profiler
selftests/rseq: Fix mm_cid test failure
selftests: vDSO: Explicitly include sched.h
selftests: vDSO: improve getrandom and chacha error messages
selftests: vDSO: unconditionally build getrandom test
selftests: vDSO: unconditionally build chacha test
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable kunit tests for arm64+ACPI
- Fix refcount issue in kunit tests
- Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq
- Drop type ref on 'msi-parent in fsl,qoriq-mc binding
- Move elgin,jg10309-01 to its own binding from trivial-devices
* tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Skip kunit tests when arm64+ACPI doesn't populate root node
of: Fix unbalanced of node refcount and memory leaks
dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent
dt-bindings: display: elgin,jg10309-01: Add own binding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev platform driver fix from Helge Deller:
"Switch fbdev drivers back to struct platform_driver::remove()
Now that 'remove()' has been converted to the sane new API, there's
no reason for the 'remove_new()' use, so this converts back to the
traditional and simpler name.
See commits
5c5a7680e67b ("platform: Provide a remove callback that returns no value")
0edb555a65d1 ("platform: Make platform_driver::remove() return void")
for background to this all"
* tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Switch back to struct platform_driver::remove()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix clock handle leak in probe() error path in gpio-aspeed
- add a dummy register read to ensure the write actually completed
* tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: aspeed: Use devm_clk api to manage clock source
gpio: aspeed: Add the flush write to ensure the write complete.
|
|
Pull NFS client fixes from Anna Schumaker:
"Localio Bugfixes:
- remove duplicated include in localio.c
- fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
- fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
- fix nfsd_file tracepoints to handle NULL rqstp pointers
Other Bugfixes:
- fix program selection loop in svc_process_common
- fix integer overflow in decode_rc_list()
- prevent NULL-pointer dereference in nfs42_complete_copies()
- fix CB_RECALL performance issues when using a large number of
delegations"
* tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: remove revoked delegation from server's delegation list
nfsd/localio: fix nfsd_file tracepoints to handle NULL rqstp
nfs_common: fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
nfs_common: fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
SUNRPC: Fix integer overflow in decode_rc_list()
sunrpc: fix prog selection loop in svc_process_common
nfs: Remove duplicated include in localio.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU fix from Neeraj Upadhyay:
"Fix rcuog kthread wakeup invocation from softirq context on a CPU
which has been marked offline.
This can happen when new callbacks are enqueued from a softirq on an
offline CPU before it calls rcutree_report_cpu_dead(). When this
happens on NOCB configuration, the rcuog wake-up is deferred through
an IPI to an online CPU. This is done to avoid call into the scheduler
which can risk arming the RT-bandwidth after hrtimers have been
migrated out and disabled.
However, doing IPI call from softirq is not allowed: Fix this by
forcing deferred rcuog wakeup through the NOCB timer when the CPU is
offline"
* tag 'rcu.fixes.6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
rcu/nocb: Fix rcuog wake-up from offline softirq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for topology information of Xen PV guests"
* tag 'for-linus-6.12a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: mark boot CPU of PV guest in MSR_IA32_APICBASE
|
|
Masami reported a bug when running function graph tracing then the
function profiler. The following commands would cause a kernel crash:
# cd /sys/kernel/tracing/
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled
In that order. Create a test to test this two to make sure this does not
come back as a regression.
Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2
Link: https://lore.kernel.org/all/20241010165235.35122877@gandalf.local.home/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by:
glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)")
Without this fix, rseq selftests for mm_cid fail:
./run_param_test.sh
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running mm_cid test spinlock
Error: cpu id getter unavailable
Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
CC: Carlos O'Donell <carlos@redhat.com>
CC: Florian Weimer <fweimer@redhat.com>
CC: linux-kselftest@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Pull io_uring fixes from Jens Axboe:
- Explicitly have a mshot_finished condition for IORING_OP_RECV in
multishot mode, similarly to what IORING_OP_RECVMSG has. This doesn't
fix a bug right now, but it makes it harder to actually have a bug
here if a request takes multiple iterations to finish.
- Fix handling of retry of read/write of !FMODE_NOWAIT files. If they
are pollable, that's all we need.
* tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux:
io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT
io_uring/rw: fix cflags posting for single issue multishot read
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address two issues in the TPMI module of the Intel RAPL power
capping driver and one issue in the processor part of the Intel
int340x thermal driver, update a CPU ID list and register definitions
needed for RAPL PL4 support and remove some unused code.
Specifics:
- Fix the TPMI_RAPL_REG_DOMAIN_INFO register offset in the TPMI part
of the Intel RAPL power capping driver, make it ignore minor
hardware version mismatches (which only indicate exposing
additional features) and update register definitions in it to
enable PL4 support (Zhang Rui)
- Add Arrow Lake-U to the list of processors supporting PL4 in the
MSR part of the Intel RAPL power capping driver (Sumeet Pawnikar)
- Remove excess pci_disable_device() calls from the processor part of
the int340x thermal driver to address a warning triggered during
module unload and remove unused CPU hotplug code related to RAPL
support from it (Zhang Rui)"
* tag 'pm-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: processor: Add MMIO RAPL PL4 support
thermal: intel: int340x: processor: Remove MMIO RAPL CPU hotplug support
powercap: intel_rapl_msr: Add PL4 support for Arrowlake-U
powercap: intel_rapl_tpmi: Ignore minor version change
thermal: intel: int340x: processor: Fix warning during module unload
powercap: intel_rapl_tpmi: Fix bogus register reading
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Address possible use-after-free scenarios during the processing of
thermal netlink commands and during thermal zone removal (Rafael
Wysocki)"
* tag 'thermal-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Free tzp copy along with the thermal zone
thermal: core: Reference count the zone in thermal_zone_get_by_id()
|